Hi Ola, indeed , it works with both scripts ( with newvserver-var value in
squeeze), this is because I had a lot of bpo (backports) packages, I did
another test, removed all the bpo packages (downgrade) and
use newvserver-var value in lenny with standard script..and it works.
Once again thank you so much for your help.
Jorge E. Espada
On Tue, Sep 14, 2010 at 3:00 AM, Ola Lundqvist <o...@inguza.com> wrote:
> Hi Jorge
>
> Good to see that this works. If you change to squeeze but still use
> the normal create script (and not the one I attached), do it still
> work?
>
> On Mon, Sep 13, 2010 at 12:21:44PM -0300, jorge espada wrote:
> > Hi Ola, I changed lenny for squeeze in /etc/vservers/newvserver-vars
> > and did the trick..with some errors..but at least I could crate a
> > vserver and start it:
>
> Ok.
>
> > errors:
> >
> > ....
> > sing makefile-style concurrent boot in runlevel 6.
> > Asking all remaining processes to terminate...done.
> > All processes ended within 1 seconds....done.
> > Stopping enhanced syslogd: rsyslogd.
> > Saving the system clock.
> > Cannot access the Hardware Clock via any known method.
> > Use the --debug option to see the details of our search for an access
> > method.
> > Deconfiguring network interfaces...done.
> > Cleaning up ifupdown....
>
> All the above is normal. Nothing to worry about.
>
> > Unmounting temporary filesystems...umount: /tmp: must be superuser to
> > umount
>
> I think you mis some capabilities here. Nothing to worry about though.
>
> > failed.
> > Deactivating swap...swapoff: Not superuser.
> > failed.
> > mount: permission denied
> > Will now restart.
> > ifdown: shutdown eth0: Permission denied
>
> I do not think those warnings/errors are a problem.
>
> > /usr/lib/util-vserver/vserver.stop: line 98: 8046 Killed
> > "${ionice_c...@]}" "${nice_c...@]}" "${chbind_c...@]}" "$_VSPACE"
> > --enter "$S_CONTEXT" "${opts_vspa...@]}" -- "$_VTAG" --migrate
> > "${opts_vtag_ent...@]}" --silent -- $_VCONTEXT $SILENT_OPT --migrate
> > $OPT_VCONTEXT_CHROOT --xid "$S_CONTEXT" -- "${initcmd_st...@]}"
> > Warning: Executing wildcard deletion to stay compatible with old
> > scripts.
> > Explicitly specify the prefix length ([1]10.255.1.192/32) to
> > avoid this warning.
> > This special behaviour is likely to disappear in further
> > releases,
> > fix your scripts!
>
> Hmm. This one may be an issue. But that is a util-vserver problem in that
> case... But it looks like it started fine.
>
> > You should now adjust the configuration in /etc/vservers/test26/
> > to suit your needs,
> > or else just go ahead and type `vserver test26 start' to start
> > your new virtual server. debian/rules!
> > backup:~# vserver-stat
> > CTX PROC VSZ RSS userTIME sysTIME UPTIME NAME
> > backup:~# vserver test26 start
> > Using makefile-style concurrent boot in runlevel 3.
> > Starting enhanced syslogd: rsyslogd.
> > Starting periodic command scheduler: cron.
> > Running scripts in rc3.d/ took 0 seconds.
> > backup:~#
> >
> ***********************************************************************
> > ******+
> > Info you asked:
> > cat /etc/vservers/newvserver-vars
> > # Configuration file for newvserver
> > # See man newvserver for the variables that you can set here.
> > MIRROR="[2]http://debian.mydomain.com:3142/debian";
>
> What do this one contain? Just a normal mirror or is it some upates
> as well?
>
> > DIST="lenny"
> > INTERFACE="eth0"
> > cat /etc/debian_version
> > 5.0.6
> > dpkg -l util-vserver
> > Desired=Unknown/Install/Remove/Purge/Hold
> > |
> >
> Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig
> > -pend
> > |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err:
> > uppercase=bad)
> > ||/ Name Version
> > Description
> >
> +++-===============================-===============================-===
> >
> =======================================================================
> > ====
> > ii util-vserver 0.30.216~r2772-6
> > user-space tools for Linux-VServer virtual private servers
> > backup:~# COLUMNS=180 dpkg -l "linux-image*" | grep "^ii"
> > ii linux-image-2.6-amd64 2.6.32+27~bpo50+1
> > Linux 2.6 for 64-bit PCs (meta-package)
> > ii linux-image-2.6.26-1-amd64 2.6.26-13lenny2
> > Linux 2.6.26 image on AMD64
> > ii linux-image-2.6.26-2-amd64 2.6.26-25
> > Linux 2.6.26 image on AMD64
> > ii linux-image-2.6.32-bpo.3-amd64 2.6.32-9~bpo50+1
> > Linux 2.6.32 for 64-bit PCs
> > ii linux-image-2.6.32-bpo.5-amd64 2.6.32-20~bpo50+1
> > Linux 2.6.32 for 64-bit PCs
> > ii linux-image-2.6.32-bpo.5-vserver-amd64 2.6.32-20~bpo50+1
> > Linux 2.6.32 for 64-bit PCs, Linux-VServer support
> > ii linux-image-vserver-amd64 2.6.32+27~bpo50+1
> > Linux for 64-bit PCs (meta-package), Linux-VServer support
> > backup:~# uname -a
> > Linux backup 2.6.32-bpo.5-vserver-amd64 #1 SMP Mon Aug 23 11:51:44 UTC
> > 2010 x86_64 GNU/Linux
> > Thank you very much for your excellent support
>
> You are welcome.
>
> Best regards,
>
> // Ola
>
> > Jorge E. Espada
> > On Sat, Sep 11, 2010 at 4:19 PM, Ola Lundqvist <[3]...@inguza.com>
> > wrote:
> >
> > Hi Jorge
> > I have removed a lot of the logs here and given some comments.
> > Please take a look below.
> > Dist is lenny for some unknown reason. The default is squeeze, but
> > you must have some config file that specify lenny.
> > What is the contents of /etc/vservers/newvserver-vars ?
> > Waat is the contents of /etc/debian_version ?
> > Please execute the following commands as well:
> > dpkg -l util-vserver
> > COLUMNS=180 dpkg -l "linux-image*" | grep "^ii"
> > uname -a
> >
> > On Sat, Sep 11, 2010 at 11:44:15AM -0300, jorge espada wrote:
> > > Hi Ola, unfortunately the script didn't work :( , I think the
> > problem
> > > is with the backported kernel...see below the diff between the
> > orig and
> > > new vserver script and the full log :
> >
> > ...
> >
> > > "$VROOTDIR/$VHOST/etc/inittab.dist"
> > > *****************************************************
> >
> > > sh -xv newvserver.sh --hostname test26 --domain
> > [6][4]mydomain.com --ip
> > ...
> > > + '[' woody == lenny ']'
> > > + cat
> > ...
> >
> > > ## start vserver before we can exec anything inside it
> > > vserver $VHOST start
> > > + vserver test26 start
> > > /etc/init.d/rc: line 74: /etc/default/rcS: No such file or
> > directory
> > > error: '/etc/init.d/rc' exited outside the expected code flow.
> >
> > This problem is really not something I can do about from the
> > newvserver.sh
> > script. Debootstrap run fine, and this file is not modified
> > afterwards.
> > So I have no clue why vserver start fails. Please make sure you have
> > a proper
> >
> > > An error occured while executing the vserver startup sequence;
> > when
> > > there are no other messages, it is very likely that the
> > init-script
> > > (/etc/init.d/rc 3) failed.
> > > Common causes are:
> > > * /etc/rc.d/rc on Fedora Core 1 and RH9 fails always; the
> > 'apt-rpm'
> > > build
> > > method knows how to deal with this, but on existing
> > installations,
> > > appending 'true' to this file will help.
> > > Failed to start vserver 'test26'
> > > # Run the above commands from within the server
> > > chmod 755 $VROOTDIR/$VHOST/vserver-config.sh
> > > + chmod 755
> > /etc/vservers/.defaults/vdirbase/test26/vserver-config.sh
> > > vserver $VHOST exec /vserver-config.sh
> > > + vserver test26 exec /vserver-config.sh
> > > 'vserver ... suexec' is supported for running vservers only;
> > > aborting...
> >
> > Best regards,
> > // Ola
> >
> > --
> > --- Inguza Technology AB --- MSc in Information Technology ----
> > / [5]...@inguza.com Annebergsslingan 37 \
> > | [6]o...@debian.org 654 65 KARLSTAD |
> > | [7]http://inguza.com/ Mobile: +46 (0)70-332 1551 |
> > \ gpg/f.p.: 7090 A92B 18FE 7994 0C36 4FE4 18A1 B1CF 0FE5 3DD9 /
> > ---------------------------------------------------------------
> >
> > Referenser
> >
> > 1. http://10.255.1.192/32
> > 2. http://debian.mydomain.com:3142/debian
> > 3. mailto:o...@inguza.com
> > 4. http://mydomain.com/
> > 5. mailto:o...@inguza.com
> > 6. mailto:o...@debian.org
> > 7. http://inguza.com/
>
> --
> --- Inguza Technology AB --- MSc in Information Technology ----
> / o...@inguza.com Annebergsslingan 37 \
> | o...@debian.org 654 65 KARLSTAD |
> | http://inguza.com/ Mobile: +46 (0)70-332 1551 |
> \ gpg/f.p.: 7090 A92B 18FE 7994 0C36 4FE4 18A1 B1CF 0FE5 3DD9 /
> ---------------------------------------------------------------
>
