Package: linux-image-2.6.26-2-686 Version: 2.6.26-25 Server: Nexenta Core Platform 3.0 (~OpenSolaris b134). Client: Debian Lenny (5.0.6) GNU/Linux running kernel 2.6.26-2-686 (2.6.26-25) with cifs.ko version 1.53.
The mount options used are (I stripped authentication info): rw,username=userX,password=passwordX,uid=userX,gid=groupY,dir_mode=0775,file_mode=0774 The problem I notice is that on the client, files appear multiple times in directory as soon as they are more than 127 actual files in the directory (and it is reproducible at will). At 127 files, each one is shown 2x (twice), up to 128x in directories with more that a few thousands files. Their inodes are identical (as shows "ls -li"). Listing the directory gets slower and slower with the number of files (and duplicates) in it. On the server, everything is fine though. Shell globbing is getting the duplicates. I tried with kernel 2.6.32 (which has a newer cifs.ko) from backports.debian.org, and the problem is not present (fixed?). In the past, it was possible to download the sources for latest cifs.ko separately, and apply it to an older kernel, but it no longer seems possible (or I did not found latest sources). I already reported it upstream: https://bugzilla.samba.org/show_bug.cgi?id=7676 Package: linux-2.6 Version: 2.6.26-25 Severity: normal -- Package-specific info: ** Version: Linux version 2.6.26-2-686 (Debian 2.6.26-22) (da...@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu Mar 11 23:19:46 UTC 2010 ** Command line: root=/dev/hda5 ro ** Not tainted ** Kernel log: [16687522.716785] usb 4-5: reset high speed USB device using ehci_hcd and address 4 [16687522.961323] usb 4-5: reset high speed USB device using ehci_hcd and address 4 [16687836.642239] usb 4-5: reset high speed USB device using ehci_hcd and address 4 [16687836.909158] usb 4-5: reset high speed USB device using ehci_hcd and address 4 [16688156.226585] usb 4-5: reset high speed USB device using ehci_hcd and address 4 [16688156.478266] usb 4-5: reset high speed USB device using ehci_hcd and address 4 [16688464.873685] usb 4-5: reset high speed USB device using ehci_hcd and address 4 [16688465.207687] usb 4-5: reset high speed USB device using ehci_hcd and address 4 [16688775.063756] usb 4-5: reset high speed USB device using ehci_hcd and address 4 [16688775.304734] usb 4-5: reset high speed USB device using ehci_hcd and address 4 [16689093.992156] usb 4-5: reset high speed USB device using ehci_hcd and address 4 [16689094.235156] usb 4-5: reset high speed USB device using ehci_hcd and address 4 ** Model information not available ** Loaded modules: Module Size Used by nls_cp437 5568 0 ip6table_filter 2432 0 ip6_tables 11376 1 ip6table_filter iptable_filter 2624 0 ip_tables 10160 1 iptable_filter x_tables 13284 2 ip6_tables,ip_tables vfat 9152 0 fat 40864 1 vfat nls_utf8 1760 0 ntfs 185952 0 nls_base 6820 5 nls_cp437,vfat,fat,nls_utf8,ntfs usb_storage 77120 0 cpufreq_stats 3776 0 freq_table 4224 1 cpufreq_stats tun 8292 0 microcode 8524 0 firmware_class 6816 1 microcode ipv6 235396 32 deflate 2624 0 zlib_deflate 17624 1 deflate zlib_inflate 14144 1 deflate ctr 3936 0 twofish 8224 0 twofish_common 13888 1 twofish camellia 19936 0 serpent 18688 0 blowfish 8352 0 des_generic 16672 0 cbc 3264 0 aes_i586 7744 0 aes_generic 29256 1 aes_i586 xcbc 4296 0 sha256_generic 11360 0 sha1_generic 2304 0 crypto_null 2880 0 crypto_blkcipher 15236 3 ctr,cbc,crypto_null af_key 25524 0 ext2 54504 1 eeprom 5232 0 lm85 23332 0 hwmon_vid 2720 1 lm85 tcp_diag 1472 0 inet_diag 8392 1 tcp_diag advantechwdt 4880 0 serio_raw 4740 0 parport_pc 22500 0 parport 30988 1 parport_pc pcspkr 2432 0 psmouse 32336 0 snd_intel8x0 26268 0 snd_ac97_codec 88452 1 snd_intel8x0 i2c_i801 7920 0 ac97_bus 1728 1 snd_ac97_codec rng_core 3940 0 i2c_core 19828 3 eeprom,lm85,i2c_i801 button 6096 0 intel_agp 22524 1 agpgart 28808 1 intel_agp shpchp 25528 0 pci_hotplug 23460 1 shpchp snd_pcm 62660 2 snd_intel8x0,snd_ac97_codec snd_timer 17800 1 snd_pcm snd 45636 4 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer soundcore 6368 1 snd snd_page_alloc 7816 2 snd_intel8x0,snd_pcm evdev 8000 3 ext3 105576 2 jbd 39476 1 ext3 mbcache 7108 2 ext2,ext3 dm_mirror 15136 0 dm_log 8452 1 dm_mirror dm_snapshot 14340 0 dm_mod 46216 3 dm_mirror,dm_log,dm_snapshot ide_disk 10496 4 ide_cd_mod 27684 0 cdrom 30176 1 ide_cd_mod sd_mod 22200 2 ata_generic 4676 0 ata_piix 14404 2 libata 140448 2 ata_generic,ata_piix scsi_mod 129548 3 usb_storage,sd_mod,libata dock 8304 1 libata piix 6568 0 [permanent] tg3 84708 0 floppy 47844 0 ide_pci_generic 3908 0 [permanent] ide_core 96168 4 ide_disk,ide_cd_mod,piix,ide_pci_generic ehci_hcd 28428 0 uhci_hcd 18672 0 usbcore 118192 4 usb_storage,ehci_hcd,uhci_hcd thermal 15228 0 processor 32576 1 thermal fan 4196 0 thermal_sys 10856 3 thermal,processor,fan ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02) Subsystem: Hewlett-Packard Company d330 uT [103c:12bc] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] Capabilities: <access denied> Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:02.0 VGA compatible controller [0300]: Intel Corporation 82865G Integrated Graphics Controller [8086:2572] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company D530 sff(dc578av) [103c:12bc] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 10 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at fc400000 (32-bit, non-prefetchable) [size=512K] Region 2: I/O ports at 14e0 [size=8] Capabilities: <access denied> Kernel modules: intelfb 00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company d530 CMT (DG746A) [103c:12bc] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 1440 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company d530 CMT (DG746A) [103c:12bc] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 1460 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company d530 CMT (DG746A) [103c:12bc] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 1480 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company d530 CMT (DG746A) [103c:12bc] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 0: Memory at fc480000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=64 Memory behind bridge: fc500000-fc7fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Kernel modules: shpchp 00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel modules: intel-rng, iTCO_wdt 00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Hewlett-Packard Company d530 CMT (DG746A) [103c:12bc] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 14c0 [size=16] Region 5: Memory at 50000000 (32-bit, non-prefetchable) [size=1K] Kernel driver in use: PIIX_IDE Kernel modules: piix 00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller [8086:24d1] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Hewlett-Packard Company d530 CMT (DG746A) [103c:12bc] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 14f8 [size=8] Region 1: I/O ports at 1810 [size=4] Region 2: I/O ports at 1800 [size=8] Region 3: I/O ports at 1814 [size=4] Region 4: I/O ports at 14d0 [size=16] Kernel driver in use: ata_piix Kernel modules: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02) Subsystem: Hewlett-Packard Company d330 uT [103c:12bc] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at fc00 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02) Subsystem: Hewlett-Packard Company d330 uT [103c:12bc] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at 1000 [size=256] Region 1: I/O ports at 1400 [size=64] Region 2: Memory at fc480400 (32-bit, non-prefetchable) [size=512] Region 3: Memory at fc480600 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: Intel ICH Kernel modules: snd-intel8x0 05:02.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5782 Gigabit Ethernet [14e4:1696] (rev 03) Subsystem: Hewlett-Packard Company d530 CMT (DG746A) [103c:12bc] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (16000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at fc500000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: <access denied> Kernel driver in use: tg3 Kernel modules: tg3 ** USB devices: Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 004: ID 090c:1000 Feiya Technology Corp. Flash Drive Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: 5.0.6 APT prefers proposed-updates APT policy: (500, 'proposed-updates'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.26-2-686 (SMP w/2 CPU cores) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.26-2-686 depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.26-2-686 recommends: ii libc6-i686 2.7-18lenny4 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.26-2-686 suggests: ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.26 <none> (no description available) Versions of packages linux-image-2.6.26-2-686 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) -- debconf information excluded -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
