Package: linux-2.6
Version: 2.6.32-21
Severity: important
Tags: squeeze
As I told the kernel gave me a error message during unpacking an archive.
The unrar process did not die and i could not even kill it with -9.
Afterwards thunar hung up as i tried to rename a file, console and other stuff
still worked.
So i did a "init 6" but after xorg stopped the shutdown did not continue.
I could switch through the tty's but login or typing any characters was
impossible.
Also there were no additional kernel messages.
The message after unrar crashed was:
[53695.157558] BUG: unable to handle kernel NULL pointer dereference at
00000800
[53695.157567] IP: [<c10cd8e7>] unmap_underlying_metadata+0x1f/0x3a
[53695.157579] *pde = 00000000
[53695.157583] Oops: 0002 [#1] SMP
[53695.157588] last sysfs file:
/sys/devices/pci0000:00/0000:00:1f.2/host3/target3:0:0/3:0:0:0/block/sdc/uevent
[53695.157593] Modules linked in: ppdev lp fuse nls_utf8 cifs firewire_sbp2
loop snd_emu10k1_synth isl6421 snd_emux_synth cx24123 snd_seq_virmidi cx88_dvb
snd_seq_midi_emul cx88_vp3054_i2c videobuf_dvb snd_emu10k1 dvb_core
snd_ac97_codec ac97_bus snd_util_mem cx88_alsa snd_hwdep snd_pcm_oss
snd_seq_midi snd_mixer_oss snd_rawmidi snd_pcm snd_seq_midi_event cx8802 cx8800
snd_page_alloc snd_seq cx88xx snd_timer snd_seq_device v4l2_common st ir_common
videodev snd osst emu10k1_gp v4l1_compat soundcore i2c_algo_bit i2c_i801
nvidia(P) tveeprom videobuf_dma_sg gameport i2c_core videobuf_core btcx_risc
evdev parport_pc rng_core parport button pcspkr shpchp processor pci_hotplug
psmouse serio_raw ext3 jbd mbcache usbhid hid sg sr_mod cdrom sd_mod crc_t10dif
ata_generic uhci_hcd firewire_ohci aic7xxx ata_piix thermal ehci_hcd skge
firewire_core crc_itu_t scsi_transport_spi floppy libata thermal_sys scsi_mod
usbcore nls_base [last unloaded: scsi_wait_scan]
[53695.157684]
[53695.157689] Pid: 5036, comm: unrar Tainted: P (2.6.32-5-686 #1) To
Be Filled By O.E.M.
[53695.157694] EIP: 0060:[<c10cd8e7>] EFLAGS: 00010206 CPU: 0
[53695.157699] EIP is at unmap_underlying_metadata+0x1f/0x3a
[53695.157703] EAX: 00000800 EBX: 00000800 ECX: 00000006 EDX: f6822b28
[53695.157707] ESI: 00000000 EDI: f6822a00 EBP: 00000000 ESP: f531fd1c
[53695.157711] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[53695.157716] Process unrar (pid: 5036, ti=f531e000 task=f52b9100
task.ti=f531e000)
[53695.157719] Stack:
[53695.157721] 00000000 f531fd50 c1a4b7c0 c10ce286 00000246 00000000 f59c009c
00001000
[53695.157731] <0> 00040586 00000000 00001000 f46bec40 00000000 f643f614
f643f63c f46bec40
[53695.157740] <0> c1a4b7c0 f59c014c f59c009c 00000000 c10ce50d 00001000
f805fe2b f59c009c
[53695.157751] Call Trace:
[53695.157757] [<c10ce286>] ? __block_prepare_write+0x163/0x297
[53695.157764] [<c10ce50d>] ? block_write_begin+0x70/0xc6
[53695.157778] [<f805fe2b>] ? ext3_get_block+0x0/0xd1 [ext3]
[53695.157790] [<f80610f3>] ? ext3_write_begin+0xe6/0x1d2 [ext3]
[53695.157802] [<f805fe2b>] ? ext3_get_block+0x0/0xd1 [ext3]
[53695.157810] [<c1087ab7>] ? generic_file_buffered_write+0xd0/0x21d
[53695.157819] [<c1088001>] ? __generic_file_aio_write+0x265/0x28d
[53695.157826] [<c102cdb6>] ? try_to_wake_up+0x25d/0x269
[53695.157833] [<c10beac7>] ? pollwake+0x5c/0x65
[53695.157838] [<c108807a>] ? generic_file_aio_write+0x51/0x93
[53695.157847] [<c10b2652>] ? do_sync_write+0xc0/0x107
[53695.157854] [<c10437ee>] ? autoremove_wake_function+0x0/0x2d
[53695.157860] [<c10b239e>] ? fsnotify_modify+0x5a/0x61
[53695.157867] [<c1101994>] ? security_file_permission+0xc/0xd
[53695.157872] [<c10b2592>] ? do_sync_write+0x0/0x107
[53695.157876] [<c10b2f7e>] ? vfs_write+0x7e/0xd6
[53695.157882] [<c10b306e>] ? sys_write+0x3c/0x63
[53695.157888] [<c10030fb>] ? sysenter_do_call+0x12/0x28
[53695.157891] Code: 75 08 89 d8 5b e9 cc ff ff ff 5b c3 57 89 c7 56 89 ce 53
89 d3 e8 5c df 19 00 89 da 89 f1 89 f8 e8 54 f1 ff ff 85 c0 89 c3 74 17 <3e> 80
20 fd e8 ba ff ff ff 3e 80 23 f7 89 d8 5b 5e 5f e9 ef f3
[53695.157939] EIP: [<c10cd8e7>] unmap_underlying_metadata+0x1f/0x3a SS:ESP
0068:f531fd1c
[53695.157946] CR2: 0000000000000800
[53695.157950] ---[ end trace 32f03432c42719f5 ]---
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-21) (b...@decadent.org.uk) (gcc
version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Wed Aug 25 14:28:12 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686
root=UUID=7978331f-a546-423d-9abd-ede8500c8777 ro quiet
** Tainted: P (1)
* Proprietary module has been loaded.
** Kernel log:
[ 16.599187] PM: Resume from partition 8:17
[ 16.599190] PM: Checking hibernation image.
[ 16.608702] PM: Error -22 checking image file
[ 16.608705] PM: Resume from disk failed.
[ 16.634279] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 16.634284] EXT3-fs: write access will be enabled during recovery.
[ 17.370950] scsi 4:0:3:0: Sequential-Access HP Ultrium 1-SCSI E32D
PQ: 0 ANSI: 3
[ 17.370966] scsi target4:0:3: Beginning Domain Validation
[ 17.441503] scsi target4:0:3: wide asynchronous
[ 17.495378] scsi target4:0:3: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset
15)
[ 17.546414] scsi target4:0:3: Domain Validation skipping write tests
[ 17.546418] scsi target4:0:3: Ending Domain Validation
[ 18.054325] kjournald starting. Commit interval 5 seconds
[ 18.054343] EXT3-fs: recovery complete.
[ 18.054750] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.428223] udev: starting version 160
[ 19.941181] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 20.215405] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 20.215564] ACPI: Power Button [PWRB]
[ 20.215715] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 20.215802] ACPI: Power Button [PWRF]
[ 20.398014] scsi 4:0:3:0: Attached scsi generic sg4 type 1
[ 20.631448] processor LNXCPU:00: registered as cooling_device0
[ 20.648836] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 20.657339] parport_pc 00:08: reported by Plug and Play ACPI
[ 20.657444] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 20.681328] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 20.686888] intel_rng: FWH not detected
[ 21.257019] osst :I: Tape driver with OnStream support version 0.99.4
[ 21.257022] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 21.266590] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 21.697973] nvidia: module license 'NVIDIA' taints kernel.
[ 21.697979] Disabling lock debugging due to kernel taint
[ 22.951022] st: Version 20081215, fixed bufsize 32768, s/g segs 256
[ 22.951898] st 4:0:3:0: Attached scsi tape st0
[ 22.951903] st 4:0:3:0: st0: try direct i/o: yes (alignment 4 B)
[ 22.962122] gameport: EMU10K1 is pci0000:02:0b.1/gameport0, io 0xdfe0, speed
1387kHz
[ 22.962600] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 22.962612] vgaarb: device changed decodes:
PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 22.963141] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.24 Thu Apr
22 09:18:20 PDT 2010
[ 23.024257] Linux video capture interface: v2.00
[ 23.404014] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.7 loaded
[ 23.404633] cx88[0]: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus
DVB-S [card=37,autodetected], frontend(s): 1
[ 23.404637] cx88[0]: TV tuner type 4, Radio tuner type -1
[ 23.405437] cx88/0: cx2388x v4l2 driver version 0.0.7 loaded
[ 23.474814] cx2388x alsa driver version 0.0.7 loaded
[ 23.563877] tveeprom 1-0050: Hauppauge model 92001, rev C1B1, serial# 2795787
[ 23.563883] tveeprom 1-0050: MAC address is 00-0D-FE-2A-A9-0B
[ 23.563888] tveeprom 1-0050: tuner model is Conexant_CX24109 (idx 111, type
4)
[ 23.563892] tveeprom 1-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
[ 23.563897] tveeprom 1-0050: audio processor is CX883 (idx 32)
[ 23.563901] tveeprom 1-0050: decoder processor is CX883 (idx 22)
[ 23.563905] tveeprom 1-0050: has no radio, has IR receiver, has no IR
transmitter
[ 23.563909] cx88[0]: hauppauge eeprom: model=92001
[ 23.564619] input: cx88 IR (Hauppauge Nova-S-Plus as
/devices/pci0000:00/0000:00:1e.0/0000:02:0a.2/input/input6
[ 23.564728] cx88[0]/2: cx2388x 8802 Driver Manager
[ 23.564748] cx88-mpeg driver manager 0000:02:0a.2: PCI INT A -> GSI 22
(level, low) -> IRQ 22
[ 23.564760] cx88[0]/2: found at 0000:02:0a.2, rev: 5, irq: 22, latency: 64,
mmio: 0xfc000000
[ 23.564768] IRQ 22/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 23.564839] cx8800 0000:02:0a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 23.564849] cx88[0]/0: found at 0000:02:0a.0, rev: 5, irq: 22, latency: 64,
mmio: 0xfa000000
[ 23.564861] IRQ 22/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 23.564916] cx88[0]/0: registered device video0 [v4l2]
[ 23.564951] cx88[0]/0: registered device vbi0
[ 23.565231] cx88_audio 0000:02:0a.1: PCI INT A -> GSI 22 (level, low) -> IRQ
22
[ 23.565240] IRQ 22/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 23.565267] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[ 23.584805] EMU10K1_Audigy 0000:02:0b.0: PCI INT A -> GSI 23 (level, low) ->
IRQ 23
[ 23.587874] Installing spdif_bug patch: SB Audigy 2 Platinum [SB0240P]
[ 23.743073] cx88/2: cx2388x dvb driver version 0.0.7 loaded
[ 23.743079] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 23.743084] cx88[0]/2: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus
DVB-S [card=37]
[ 23.743088] cx88[0]/2: cx2388x based DVB/ATSC card
[ 23.743092] cx8802_alloc_frontends() allocating 1 frontend(s)
[ 23.862679] CX24123: detected CX24123
[ 23.959333] DVB: registering new adapter (cx88[0])
[ 23.959340] DVB: registering adapter 0 frontend 0 (Conexant
CX24123/CX24109)...
[ 24.611915] Adding 4883720k swap on /dev/sdb1. Priority:-1 extents:1
across:4883720k
[ 308.549744] EXT3 FS on sdb3, internal journal
[ 308.657303] loop: module loaded
[ 319.664573] kjournald starting. Commit interval 5 seconds
[ 319.664590] EXT3-fs warning: maximal mount count reached, running e2fsck is
recommended
[ 319.667985] EXT3 FS on sdc2, internal journal
[ 319.667989] EXT3-fs: recovery complete.
[ 319.669308] EXT3-fs: mounted filesystem with ordered data mode.
[ 320.197400] fuse init (API version 7.13)
[ 320.551421] skge eth0: enabling interface
[ 320.555266] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 321.011964] Registering the dns_resolver key type
[ 321.011980] Slow work thread pool: Starting up
[ 321.012235] Slow work thread pool: Ready
[ 321.012411] CIFS: Unknown mount option nls
[ 321.218115] lp0: using parport0 (interrupt-driven).
[ 321.236123] ppdev: user-space parallel port driver
[ 322.896269] skge eth0: Link is up at 1000 Mbps, full duplex, flow control
both
[ 322.896458] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 325.627808] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[ 325.627827] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
[ 325.627865] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
[ 333.668012] eth0: no IPv6 routers present
** Model information
not available
** Loaded modules:
Module Size Used by
ppdev 4058 0
lp 5570 0
nls_utf8 908 1
cifs 235133 2
fuse 43762 1
firewire_sbp2 9647 0
loop 9765 0
isl6421 1040 1
cx24123 9547 1
cx88_dvb 14300 0
snd_emu10k1_synth 4024 0
cx88_vp3054_i2c 1264 1 cx88_dvb
snd_emux_synth 21890 1 snd_emu10k1_synth
snd_seq_virmidi 2955 1 snd_emux_synth
snd_seq_midi_emul 3554 1 snd_emux_synth
videobuf_dvb 3390 1 cx88_dvb
dvb_core 62650 2 cx88_dvb,videobuf_dvb
snd_emu10k1 104712 3 snd_emu10k1_synth
snd_ac97_codec 79148 1 snd_emu10k1
cx88_alsa 6079 1
ac97_bus 710 1 snd_ac97_codec
snd_pcm_oss 28671 0
snd_util_mem 1548 2 snd_emux_synth,snd_emu10k1
snd_mixer_oss 10461 2 snd_pcm_oss
snd_hwdep 4054 2 snd_emux_synth,snd_emu10k1
snd_pcm 47214 4 snd_emu10k1,snd_ac97_codec,cx88_alsa,snd_pcm_oss
snd_seq_midi 3576 0
cx8800 20155 0
cx8802 9405 1 cx88_dvb
snd_page_alloc 5045 2 snd_emu10k1,snd_pcm
snd_rawmidi 12513 3 snd_seq_virmidi,snd_emu10k1,snd_seq_midi
cx88xx 59156 4 cx88_dvb,cx88_alsa,cx8800,cx8802
snd_seq_midi_event 3684 2 snd_seq_virmidi,snd_seq_midi
snd_seq 35463 5
snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_midi,snd_seq_midi_event
ir_common 22187 1 cx88xx
snd_timer 12258 3 snd_emu10k1,snd_pcm,snd_seq
snd_seq_device 3673 5
snd_emu10k1_synth,snd_emu10k1,snd_seq_midi,snd_rawmidi,snd_seq
v4l2_common 9820 2 cx8800,cx88xx
i2c_algo_bit 3497 2 cx88_vp3054_i2c,cx88xx
snd 34363 17
snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_ac97_codec,cx88_alsa,snd_pcm_oss,snd_mixer_oss,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
videodev 25545 3 cx8800,cx88xx,v4l2_common
tveeprom 9393 1 cx88xx
st 26904 0
v4l1_compat 10250 1 videodev
emu10k1_gp 1238 0
videobuf_dma_sg 7203 5 cx88_dvb,cx88_alsa,cx8800,cx8802,cx88xx
soundcore 3450 2 snd
nvidia 9820792 28
i2c_i801 6462 0
btcx_risc 2499 4 cx88_alsa,cx8800,cx8802,cx88xx
videobuf_core 10476 5
videobuf_dvb,cx8800,cx8802,cx88xx,videobuf_dma_sg
gameport 6061 2 emu10k1_gp
osst 40561 0
i2c_core 12696 11
isl6421,cx24123,cx88_vp3054_i2c,cx8800,cx88xx,v4l2_common,i2c_algo_bit,videodev,tveeprom,nvidia,i2c_i801
shpchp 21220 0
parport_pc 15799 1
pci_hotplug 18065 1 shpchp
rng_core 2178 0
parport 22554 3 ppdev,lp,parport_pc
processor 26671 0
button 3598 0
evdev 5609 16
psmouse 44657 0
serio_raw 2916 0
pcspkr 1207 0
ext3 94204 2
jbd 32169 1 ext3
mbcache 3762 1 ext3
usbhid 27988 0
hid 50645 1 usbhid
sg 15968 0
sr_mod 10770 0
cdrom 26487 1 sr_mod
sd_mod 25869 5
crc_t10dif 1012 1 sd_mod
ata_generic 2019 0
uhci_hcd 16057 0
aic7xxx 95155 0
firewire_ohci 16509 0
ata_piix 17736 3
thermal 9206 0
scsi_transport_spi 14866 1 aic7xxx
skge 29502 0
firewire_core 31187 2 firewire_sbp2,firewire_ohci
crc_itu_t 1035 1 firewire_core
ehci_hcd 27851 0
floppy 40923 0
libata 115721 2 ata_generic,ata_piix
thermal_sys 9378 2 processor,thermal
scsi_mod 101401 9
firewire_sbp2,st,osst,sg,sr_mod,sd_mod,aic7xxx,scsi_transport_spi,libata
usbcore 98397 4 usbhid,uhci_hcd,ehci_hcd
nls_base 4541 3 nls_utf8,cifs,usbcore
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet static
address 192.168.1.44
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.1
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 192.168.1.1
dns-search aim.local
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
qlen 1000
link/ether 00:0c:6e:b8:91:c1 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.44/24 brd 192.168.1.255 scope global eth0
inet6 fe80::20c:6eff:feb8:91c1/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 140 2 0 0 0 0 0 0 140
2 0 0 0 0 0 0
eth0: 1900106 2045 0 0 0 0 0 2 264569
1986 0 0 0 0 0 0
*** Protocol statistics:
Ip:
2042 total packets received
0 forwarded
0 incoming packets discarded
2042 incoming packets delivered
1977 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
113 active connections openings
0 passive connection openings
3 failed connection attempts
1 connection resets received
4 connections established
1846 segments received
1739 segments send out
42 segments retransmited
0 bad segments received.
10 resets sent
Udp:
196 packets received
0 packets to unknown port received.
0 packet receive errors
198 packets sent
UdpLite:
TcpExt:
39 TCP sockets finished time wait in fast timer
68 delayed acks sent
Quick ack mode was activated 5 times
15 packets directly queued to recvmsg prequeue.
1546 bytes directly received in process context from prequeue
1185 packet headers predicted
1 packets header predicted and directly queued to user
220 acknowledgments not containing data payload received
48 predicted acknowledgments
17 congestion windows recovered without slow start after partial ack
1 retransmits in slow start
26 other TCP timeouts
5 DSACKs sent for old packets
14 DSACKs received
6 connections reset due to unexpected data
1 connections reset due to early user close
2 connections aborted due to timeout
TCPDSACKIgnoredNoUndo: 6
IpExt:
OutMcastPkts: 2
InBcastPkts: 2
InOctets: 1863158
OutOctets: 227807
OutMcastOctets: 321
InBcastOctets: 477
*** Device features:
eth0: 0x823
lo: 0x13865
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM
Controller/Host-Hub Interface [8086:2570] (rev 02)
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard
[1043:80f2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation 82865G/PE/P PCI to AGP Controller
[8086:2571] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Memory behind bridge: f2900000-f69fffff
Prefetchable memory behind bridge: cfe00000-dfdfffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:06.0 System peripheral [0880]: Intel Corporation 82865G/PE/P Processor to
I/O Memory Interface [8086:2576] (rev 02)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Region 0: Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]
00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard
[1043:80a6]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ef00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard
[1043:80a6]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at ef20 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard
[1043:80a6]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ef40 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard
[1043:80a6]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ef80 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2
EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard
[1043:80a6]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f6a00000-feafffff
Prefetchable memory behind bridge: dfe00000-dfefffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC
Interface Bridge [8086:24d0] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE
Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard
[1043:80a6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at fc00 [size=16]
Region 5: Memory at 80000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller
[8086:24d1] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. P4P800 series motherboard [1043:80a6]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at efe0 [size=8]
Region 1: I/O ports at efac [size=4]
Region 2: I/O ports at efa0 [size=8]
Region 3: I/O ports at efa8 [size=4]
Region 4: I/O ports at ef60 [size=16]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus
Controller [8086:24d3] (rev 02)
Subsystem: ASUSTeK Computer Inc. P4P800 Mainboard [1043:80a6]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV40 [GeForce
6800] [10de:0041] (rev a1) (prog-if 00 [VGA controller])
Subsystem: LeadTek Research Inc. Device [107d:2992]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 2: Memory at f4000000 (32-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at f69e0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
02:05.0 Ethernet controller [0200]: 3Com Corporation 3c940 10/100/1000Base-T
[Marvell] [10b7:1700] (rev 12)
Subsystem: ASUSTeK Computer Inc. A7V600/P4P800/K8V motherboard
[1043:80eb]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f7efc000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at d800 [size=256]
Capabilities: <access denied>
Kernel driver in use: skge
02:0a.0 Multimedia video controller [0400]: Conexant Systems, Inc.
CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
Subsystem: Hauppauge computer works Inc. Nova-S-Plus DVB-S [0070:9202]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (5000ns min, 13750ns max), Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx8800
02:0a.1 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI
Video and Audio Decoder [Audio Port] [14f1:8801] (rev 05)
Subsystem: Hauppauge computer works Inc. Device [0070:9202]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1000ns min, 63750ns max), Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx88_audio
02:0a.2 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI
Video and Audio Decoder [MPEG Port] [14f1:8802] (rev 05)
Subsystem: Hauppauge computer works Inc. Device [0070:9202]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1500ns min, 22000ns max), Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx88-mpeg driver manager
02:0a.4 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI
Video and Audio Decoder [IR Port] [14f1:8804] (rev 05)
Subsystem: Hauppauge computer works Inc. Device [0070:9202]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1500ns min, 63750ns max), Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
02:0b.0 Multimedia audio controller [0401]: Creative Labs SB Audigy [1102:0004]
(rev 04)
Subsystem: Creative Labs SB Audigy2 Platinum [1102:1002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at df00 [size=64]
Capabilities: <access denied>
Kernel driver in use: EMU10K1_Audigy
02:0b.1 Input device controller [0980]: Creative Labs SB Audigy Game Port
[1102:7003] (rev 04)
Subsystem: Creative Labs SB Audigy2 MIDI/Game Port [1102:0060]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: I/O ports at dfe0 [size=8]
Capabilities: <access denied>
Kernel driver in use: Emu10k1_gameport
02:0b.2 FireWire (IEEE 1394) [0c00]: Creative Labs SB Audigy FireWire Port
[1102:4001] (rev 04) (prog-if 10 [OHCI])
Subsystem: Creative Labs SB Audigy FireWire Port [1102:0010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 16 bytes
Interrupt: pin B routed to IRQ 20
Region 0: Memory at f7efb800 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f7ef4000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
02:0d.0 SCSI storage controller [0100]: Adaptec AIC-7892B U160/m [9005:0081]
(rev 02)
Subsystem: Adaptec 19160 Ultra160 SCSI Controller [9005:62a1]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (10000ns min, 6250ns max), Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 21
BIST result: 00
Region 0: I/O ports at d400 [disabled] [size=256]
Region 1: Memory at f7efa000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at dfe00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: aic7xxx
** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 046d:c30e Logitech, Inc. UltraX Keyboard (Y-BL49)
Bus 003 Device 002: ID 046d:c025 Logitech, Inc. MX500 Optical Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 05e3:0606 Genesys Logic, Inc. USB 2.0 Hub / D-Link
DUB-H4 USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.35 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.1 tools for generating an initramfs
ii linux-base 2.6.32-21 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
ii firmware-linux-free 2.6.32-21 Binary firmware for various driver
ii libc6-i686 2.11.2-2 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.32-5-686 suggests:
ii grub 0.97-61 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.26 Binary firmware for various driver
ii firmware-linux-nonfree 0.26 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
* linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
