El Fri, 20 Aug 2010 18:10:22 +0200
Aurelien Jarno <aurel...@aurel32.net> escribió:
> Could you please post the boot log (output from dmesg)?
The problem is only which "extended partitions", the primary
partitions works OK.
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
#0 Mon Aug 9 01:23:10 UTC 2010 i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (547.62-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Family = 6 Model = 8 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536805376 (511 MB)
avail memory = 511598592 (487 MB)
kbd1 at kbdmux0
acpi0: <PTLTD RSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 1ff00000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_ec0: <Embedded Controller: GPE 0x9, GLK> port 0x62,0x66 on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> on hostb0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0xf0000000-0xf7ffffff irq 5 at device 0.0
on pci1
cbb0: <TI1450 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 5 at device 2.0
on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [FILTER]
cbb1: <TI1450 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq 9 at device 2.1
on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [FILTER]
fxp0: <Intel 82559ER Pro/100 Ethernet> port 0x1800-0x183f mem
0xe8120000-0xe8120fff,0xe8100000-0xe811ffff irq 10 at device 3.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:03:47:1f:d8:f6
fxp0: [ITHREAD]
pci0: <simple comms, UART> at device 3.1 (no driver attached)
pci0: <multimedia, audio> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1850-0x185f at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1860-0x187f irq 11 at
device 7.2 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
pci0: <bridge> at device 7.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> flags 0x100 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xcbfff,0xcc000-0xcd7ff,0xe0000-0xeffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: parallel port not found.
acpi_throttle0: <ACPI CPU Throttling> on cpu0
smist0: <SpeedStep SMI> on cpu0
Timecounter "TSC" frequency 547622322 Hz quality 800
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
tsc_levels_changed: no max freq found
driver bug: Unable to set devclass (devname: (null))
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
battery0: critically low charge!
ad0: 76351MB <SAMSUNG MP0804H UE100-14> at ata0-master UDMA33
uhub0: 2 ports with 2 removable, self powered
GEOM: ad0: partition 3 does not start on a track boundary.
GEOM: ad0: partition 3 does not end on a track boundary.
GEOM: ad0: partition 2 does not start on a track boundary.
GEOM: ad0: partition 2 does not end on a track boundary.
GEOM: ad0: partition 1 does not start on a track boundary.
GEOM: ad0: partition 1 does not end on a track boundary.
acd0: DVDROM <TOSHIBA DVD-ROM SD-C2302/1127> at ata1-master UDMA33
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01
(probe0:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata1:0:0:0): CAM status: SCSI Status Error
(probe0:ata1:0:0:0): SCSI status: Check Condition
(probe0:ata1:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <TOSHIBA DVD-ROM SD-C2302 1127> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad0s1
WARNING: TMPFS is considered to be a highly experimental feature in FreeBSD.
