Package: linux-2.6
Version: 2.6.35~rc6-1~experimental.1
Severity: normal
Suspend to ram (closing laptop lid) works for a few times (maybe only once?)
then starts failing "legacy_suspend(): pnp_bus_suspend+0x0/0x57 returns 38"
Here's what it looked like when it worked:
[10619.731187] PM: Syncing filesystems ... done.
[10619.737770] PM: Preparing system for mem sleep
[10619.838203] Freezing user space processes ... (elapsed 0.01 seconds) done.
[10619.852065] Freezing remaining freezable tasks ... (elapsed 0.01 seconds)
done.
[10619.868052] PM: Entering mem sleep
[10619.868149] Suspending console(s) (use no_console_suspend to debug)
[10619.869223] sd 0:0:0:0: [sda] Stopping disk
[10619.870841] btusb_intr_complete: hci0 urb f665e700 failed to resubmit (1)
[10619.871835] btusb_bulk_complete: hci0 urb f665e980 failed to resubmit (1)
[10619.872836] btusb_bulk_complete: hci0 urb f665ec00 failed to resubmit (1)
[10619.980087] ACPI handle has no context!
[10619.980193] e100 0000:06:08.0: PCI INT A disabled
[10619.980202] e100 0000:06:08.0: PME# enabled
[10619.980215] e100 0000:06:08.0: wake-up capability enabled by ACPI
[10619.980345] tifm_7xx1 0000:06:04.2: PCI INT C disabled
[10619.981089] ata2: port disabled. ignoring.
[10619.981156] ata_piix 0000:00:1f.1: PCI INT B disabled
[10619.981245] ata_piix 0000:00:1f.1: power state changed by ACPI to D3
[10619.981467] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[10619.981549] uhci_hcd 0000:00:1d.3: PCI INT A disabled
[10619.981631] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[10619.981713] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[10619.981795] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[10619.982766] i915 0000:00:02.0: PCI INT A disabled
[10620.188095] HDA Intel 0000:00:1b.0: PCI INT A disabled
[10620.204033] PM: suspend of devices complete after 335.646 msecs
[10620.220180] PM: late suspend of devices complete after 16.140 msecs
[10620.220613] ACPI: Preparing to enter system sleep state S3
[10620.276220] PM: Saving platform NVS memory
[10620.351192] Disabling non-boot CPUs ...
Hardware is Sony Vaio TX3
-- Package-specific info:
** Version:
Linux version 2.6.35-rc6-686 (Debian 2.6.35~rc6-1~experimental.1)
(b...@decadent.org.uk) (gcc version 4.4.4 (Debian 4.4.4-7) ) #1 SMP Mon Jul 26
09:46:49 UTC 2010
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.35-rc6-686 root=/dev/mapper/carbon_vg-root ro quiet
** Not tainted
** Kernel log:
[14423.555002] btusb_bulk_complete: hci0 urb f52a5300 failed to resubmit (1)
[14423.556001] btusb_bulk_complete: hci0 urb f52a5d80 failed to resubmit (1)
[14423.608151] legacy_suspend(): pnp_bus_suspend+0x0/0x57 returns 38
[14423.608158] PM: Device 00:07 failed to suspend: error 38
[14423.608163] PM: Some devices failed to suspend
[14423.608821] sd 0:0:0:0: [sda] Starting disk
[14423.848119] PM: resume of devices complete after 239.947 msecs
[14423.848222] PM: Finishing wakeup.
[14423.848225] Restarting tasks ... done.
[14424.249074] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[14424.270153] ADDRCONF(NETDEV_UP): eth0: link is not ready
[14436.950026] wlan0: authenticate with 56:99:28:16:86:10 (try 1)
[14436.954018] wlan0: authenticated
[14436.954061] wlan0: associate with 56:99:28:16:86:10 (try 1)
[14436.956546] wlan0: RX AssocResp from 56:99:28:16:86:10 (capab=0x411 status=0
aid=1)
[14436.956554] wlan0: associated
[14436.958186] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[14438.240054] usb 1-2: new high speed USB device using ehci_hcd and address 11
[14438.372732] usb 1-2: New USB device found, idVendor=0409, idProduct=0059
[14438.372742] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[14438.372749] usb 1-2: Product: USB2.0 Hub
[14438.372754] usb 1-2: Manufacturer: NECEL
[14438.375158] hub 1-2:1.0: USB hub found
[14438.375264] hub 1-2:1.0: 3 ports detected
[14438.660119] usb 1-2.1: new high speed USB device using ehci_hcd and address
12
[14438.768365] usb 1-2.1: New USB device found, idVendor=04b4, idProduct=6560
[14438.768374] usb 1-2.1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[14438.771006] hub 1-2.1:1.0: USB hub found
[14438.771113] hub 1-2.1:1.0: 2 ports detected
[14439.004176] e100 0000:06:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex
[14439.004672] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[14439.108125] usb 1-2.2: new high speed USB device using ehci_hcd and address
13
[14439.216362] usb 1-2.2: New USB device found, idVendor=050d, idProduct=0237
[14439.216372] usb 1-2.2: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[14439.219000] hub 1-2.2:1.0: USB hub found
[14439.219108] hub 1-2.2:1.0: 4 ports detected
[14439.620122] usb 1-2.3: new full speed USB device using ehci_hcd and address
14
[14439.732854] usb 1-2.3: New USB device found, idVendor=04d2, idProduct=9801
[14439.732864] usb 1-2.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[14439.732871] usb 1-2.3: Product: Altec Lansing XT1 - USB Audio
[14439.732877] usb 1-2.3: Manufacturer: Altec Lansing Technologies, Inc.
[14439.738700] input: Altec Lansing Technologies, Inc. Altec Lansing XT1 - USB
Audio as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.3/1-2.3:1.2/input/input12
[14439.738908] generic-usb 0003:04D2:9801.0003: input,hidraw0: USB HID v1.00
Device [Altec Lansing Technologies, Inc. Altec Lansing XT1 - USB Audio] on
usb-0000:00:1d.7-2.3/input2
[14439.810060] usb 1-2.2.1: new high speed USB device using ehci_hcd and
address 15
[14439.858700] usbcore: registered new interface driver snd-usb-audio
[14439.900470] usb 1-2.2.1: New USB device found, idVendor=050d, idProduct=0237
[14439.900476] usb 1-2.2.1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[14439.902832] hub 1-2.2.1:1.0: USB hub found
[14439.902964] hub 1-2.2.1:1.0: 4 ports detected
[14439.976114] usb 1-2.2.3: new low speed USB device using ehci_hcd and address
16
[14440.074601] usb 1-2.2.3: New USB device found, idVendor=045e, idProduct=0084
[14440.074610] usb 1-2.2.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[14440.074617] usb 1-2.2.3: Product: Basic Optical Mouse
[14440.074623] usb 1-2.2.3: Manufacturer: Microsoft
[14440.082153] input: Microsoft Basic Optical Mouse as
/devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.2/1-2.2.3/1-2.2.3:1.0/input/input13
[14440.082416] generic-usb 0003:045E:0084.0004: input,hidraw1: USB HID v1.10
Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.7-2.2.3/input0
[14440.172255] usb 1-2.2.1.4: new low speed USB device using ehci_hcd and
address 17
[14440.271223] usb 1-2.2.1.4: New USB device found, idVendor=413c,
idProduct=2005
[14440.271232] usb 1-2.2.1.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[14440.271240] usb 1-2.2.1.4: Product: DELL USB Keyboard
[14440.271245] usb 1-2.2.1.4: Manufacturer: DELL
[14440.278394] input: DELL DELL USB Keyboard as
/devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.2/1-2.2.1/1-2.2.1.4/1-2.2.1.4:1.0/input/input14
[14440.278887] generic-usb 0003:413C:2005.0005: input,hidraw2: USB HID v1.10
Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1d.7-2.2.1.4/input0
[14447.496032] wlan0: no IPv6 routers present
[14449.248029] eth0: no IPv6 routers present
[16229.472001] usb 1-2: USB disconnect, address 11
[16229.472031] usb 1-2.1: USB disconnect, address 12
[16229.472301] usb 1-2.2: USB disconnect, address 13
[16229.472307] usb 1-2.2.1: USB disconnect, address 15
[16229.472313] usb 1-2.2.1.4: USB disconnect, address 17
[16229.473108] usb 1-2.2.3: USB disconnect, address 16
[16229.473813] usb 1-2.3: USB disconnect, address 14
[16230.961159] wlan0: deauthenticating from 56:99:28:16:86:10 by local choice
(reason=3)
[16230.962029] cfg80211: Calling CRDA to update world regulatory domain
[16231.207258] PM: Syncing filesystems ... done.
[16231.217990] PM: Preparing system for mem sleep
[16232.036373] Freezing user space processes ... (elapsed 0.01 seconds) done.
[16232.052135] Freezing remaining freezable tasks ... (elapsed 0.01 seconds)
done.
[16232.068115] PM: Entering mem sleep
[16232.068213] Suspending console(s) (use no_console_suspend to debug)
[16232.068739] sd 0:0:0:0: [sda] Stopping disk
[16232.070543] btusb_intr_complete: hci0 urb f7339e80 failed to resubmit (1)
[16232.071537] btusb_bulk_complete: hci0 urb f7339f80 failed to resubmit (1)
[16232.072536] btusb_bulk_complete: hci0 urb f7339d00 failed to resubmit (1)
[16232.124148] legacy_suspend(): pnp_bus_suspend+0x0/0x57 returns 38
[16232.124155] PM: Device 00:07 failed to suspend: error 38
[16232.124161] PM: Some devices failed to suspend
[16232.124868] sd 0:0:0:0: [sda] Starting disk
[16232.364081] PM: resume of devices complete after 239.913 msecs
[16232.364184] PM: Finishing wakeup.
[16232.364187] Restarting tasks ... done.
[16232.807401] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[16232.830169] ADDRCONF(NETDEV_UP): eth0: link is not ready
[16245.491485] wlan0: authenticate with 56:99:28:16:86:10 (try 1)
[16245.493933] wlan0: authenticated
[16245.493971] wlan0: associate with 56:99:28:16:86:10 (try 1)
[16245.501659] wlan0: RX AssocResp from 56:99:28:16:86:10 (capab=0x411 status=0
aid=1)
[16245.501665] wlan0: associated
[16245.503123] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[16255.984032] wlan0: no IPv6 routers present
** Model information
not available
** Loaded modules:
Module Size Used by
snd_usb_audio 73166 0
snd_usbmidi_lib 13739 1 snd_usb_audio
acpi_cpufreq 5029 0
mperf 1179 1 acpi_cpufreq
cpufreq_conservative 7744 0
cpufreq_powersave 682 0
cpufreq_stats 2257 0
cpufreq_userspace 1703 0
parport_pc 17206 0
ppdev 4728 0
lp 6388 0
parport 26678 3 parport_pc,ppdev,lp
sco 6260 2
bridge 51330 0
stp 1463 1 bridge
bnep 8109 2
rfcomm 25925 8
l2cap 26064 16 bnep,rfcomm
crc16 1303 1 l2cap
binfmt_misc 5352 1
uinput 5059 1
fuse 49756 1
loop 10863 0
firewire_sbp2 10233 0
snd_hda_codec_realtek 194485 1
arc4 1057 2
snd_hda_intel 18797 1
ecb 1475 2
snd_hda_codec 70970 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4408 2 snd_usb_audio,snd_hda_codec
snd_pcm_oss 28040 0
snd_mixer_oss 10670 1 snd_pcm_oss
i915 234672 2
snd_pcm 57079 4
snd_usb_audio,snd_hda_intel,snd_hda_codec,snd_pcm_oss
iwl3945 47494 0
snd_seq_midi 3998 0
snd_rawmidi 15712 2 snd_usbmidi_lib,snd_seq_midi
iwlcore 81211 1 iwl3945
snd_seq_midi_event 5101 1 snd_seq_midi
drm_kms_helper 23695 1 i915
snd_seq 38600 2 snd_seq_midi,snd_seq_midi_event
pcmcia 29423 0
mac80211 147621 2 iwl3945,iwlcore
snd_timer 14813 2 snd_pcm,snd_seq
snd_seq_device 4816 3 snd_seq_midi,snd_rawmidi,snd_seq
drm 143179 3 i915,drm_kms_helper
btusb 8902 2
snd 44392 15
snd_usb_audio,snd_usbmidi_lib,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
joydev 7137 0
i2c_algo_bit 4026 1 i915
bluetooth 41920 9 sco,bnep,rfcomm,l2cap,btusb
i2c_i801 7333 0
tifm_7xx1 3126 0
cfg80211 113616 3 iwl3945,iwlcore,mac80211
yenta_socket 17352 0
soundcore 5386 1 snd
pcmcia_rsrc 8355 1 yenta_socket
rng_core 2912 0
video 16979 1 i915
snd_page_alloc 6256 2 snd_hda_intel,snd_pcm
tifm_core 5237 1 tifm_7xx1
pcmcia_core 12525 3 pcmcia,yenta_socket,pcmcia_rsrc
i2c_core 18039 5 i915,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
output 1647 1 video
led_class 2301 0
sony_laptop 24110 0
tpm_infineon 6595 0
processor 27831 2 acpi_cpufreq
psmouse 43094 0
tpm_tis 6546 0
tpm 11821 2 tpm_infineon,tpm_tis
battery 4628 0
button 4474 1 i915
ac 1846 0
rfkill 13690 5 bluetooth,cfg80211,sony_laptop
tpm_bios 4225 1 tpm
pcspkr 1318 0
evdev 5954 18
serio_raw 3190 0
ext3 96850 2
jbd 37883 1 ext3
mbcache 5436 1 ext3
sha256_generic 9183 2
aes_i586 7176 3
aes_generic 26723 1 aes_i586
cbc 2037 1
usbhid 30298 0
hid 55413 1 usbhid
dm_crypt 9308 1
dm_mod 52649 9 dm_crypt
sg 16784 0
sd_mod 28350 3
sr_mod 11256 0
crc_t10dif 1195 1 sd_mod
cdrom 28530 1 sr_mod
ata_generic 2343 0
uhci_hcd 16473 0
ata_piix 18419 2
libata 143952 2 ata_generic,ata_piix
ehci_hcd 28753 0
usbcore 121253 7
snd_usb_audio,snd_usbmidi_lib,btusb,usbhid,uhci_hcd,ehci_hcd
scsi_mod 151927 5 firewire_sbp2,sg,sr_mod,sd_mod,libata
firewire_ohci 17021 0
e100 24988 0
thermal 10520 0
firewire_core 37728 2 firewire_sbp2,firewire_ohci
mii 3773 1 e100
crc_itu_t 1335 1 firewire_core
thermal_sys 11304 3 video,processor,thermal
nls_base 5877 1 usbcore
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state
DOWN qlen 1000
link/ether 00:13:a9:3c:cd:4d brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:13:02:8e:d1:71 brd ff:ff:ff:ff:ff:ff
inet 192.168.14.8/24 brd 192.168.14.255 scope global wlan0
inet6 fe80::213:2ff:fe8e:d171/64 scope link
valid_lft forever preferred_lft forever
4: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether aa:29:a2:6f:d3:e9 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 1413717 21571 0 0 0 0 0 0 1413717
21571 0 0 0 0 0 0
eth0: 3650759 6990 0 0 0 0 0 0 424172
3862 0 0 0 0 0 0
wlan0: 540759 3987 0 0 0 0 0 0 90516
459 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
28533 total packets received
7 with invalid addresses
0 forwarded
0 incoming packets discarded
28187 incoming packets delivered
25653 requests sent out
8 outgoing packets dropped
32 dropped because of missing route
Icmp:
10 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 10
10 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 10
IcmpMsg:
InType3: 10
OutType3: 10
Tcp:
144 active connections openings
4 passive connection openings
3 failed connection attempts
2 connection resets received
6 connections established
25367 segments received
25277 segments send out
5 segments retransmited
0 bad segments received.
17 resets sent
Udp:
458 packets received
10 packets to unknown port received.
0 packet receive errors
384 packets sent
UdpLite:
TcpExt:
34 TCP sockets finished time wait in fast timer
204 delayed acks sent
Quick ack mode was activated 17 times
7728 packets directly queued to recvmsg prequeue.
4446 bytes directly received in process context from prequeue
11376 packet headers predicted
2171 packets header predicted and directly queued to user
394 acknowledgments not containing data payload received
12448 predicted acknowledgments
5 congestion windows recovered without slow start after partial ack
5 other TCP timeouts
16 DSACKs sent for old packets
2 DSACKs received
1 connections reset due to unexpected data
3 connections aborted due to timeout
TCPDSACKIgnoredNoUndo: 2
IpExt:
InMcastPkts: 80
OutMcastPkts: 93
InBcastPkts: 2431
InOctets: 5238131
OutOctets: 1833263
InMcastOctets: 16488
OutMcastOctets: 17008
InBcastOctets: 239684
*** Device features:
eth0: 0x0
lo: 0x13865
pan0: 0xff3865
wlan0: 0x2000
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML
and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: Sony Corporation Device [104d:8207]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS,
943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) (prog-if
00 [VGA controller])
Subsystem: Sony Corporation Device [104d:8207]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d4100000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 1800 [size=8]
Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at d4200000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME,
943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: Sony Corporation Device [104d:8207]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d4180000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition
Audio Controller [8086:27d8] (rev 02)
Subsystem: Sony Corporation Device [104d:8207]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: Memory at d4240000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=05, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d2000000-d3ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: Sony Corporation Device [104d:8207]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: Sony Corporation Device [104d:8207]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: Sony Corporation Device [104d:8207]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 21
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: Sony Corporation Device [104d:8207]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI
Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: Sony Corporation Device [104d:8207]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at d4444000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=0a, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d4000000-d40fffff
Prefetchable memory behind bridge: 0000000080000000-0000000083ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge [8086:27b9] (rev 02)
Subsystem: Sony Corporation Device [104d:8207]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Sony Corporation Device [104d:8207]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1810 [size=16]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller
[8086:27da] (rev 02)
Subsystem: Sony Corporation Device [104d:8207]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Region 4: I/O ports at 18a0 [size=32]
02:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG
[Golan] Network Connection [8086:4222] (rev 02)
Subsystem: Intel Corporation Device [8086:1051]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: iwl3945
06:04.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller
[104c:8039]
Subsystem: Sony Corporation Device [104d:8207]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d4007000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 80000000-83fff000 (prefetchable)
Memory window 1: 84000000-87fff000
I/O window 0: 00003400-000034ff
I/O window 1: 00003800-000038ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
06:04.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant
IEEE 1394 Host Controller [104c:803a] (prog-if 10 [OHCI])
Subsystem: Sony Corporation Device [104d:8207]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 21
Region 0: Memory at d4006000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at d4000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
06:04.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia
Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b]
Subsystem: Sony Corporation Device [104d:8207]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 57 (1750ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 22
Region 0: Memory at d4004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: tifm_7xx1
06:08.0 Ethernet controller [0200]: Intel Corporation PRO/100 VM Network
Connection [8086:1093] (rev 02)
Subsystem: Sony Corporation Device [104d:8207]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d4005000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 3000 [size=64]
Capabilities: <access denied>
Kernel driver in use: e100
** USB devices:
Bus 005 Device 002: ID 044e:300c Alps Electric Co., Ltd Bluetooth Controller
(ALPS/UGPZ6)
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.35-rc6-686 (SMP w/1 CPU core)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.35-rc6-686 depends on:
ii debconf [deb 1.5.33 Debian configuration management sy
ii initramfs-to 0.97.2 tools for generating an initramfs
ii linux-base 2.6.35~rc6-1~experimental.1 Linux image base package
ii module-init- 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.35-rc6-686 recommends:
ii firmware-lin 2.6.35~rc6-1~experimental.1 Binary firmware for various driver
ii libc6-i686 2.11.2-2 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.35-rc6-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.35 <none> (no description available)
Versions of packages linux-image-2.6.35-rc6-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
ii firmware-iwlwifi 0.26 Binary firmware for Intel Wireless
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.26 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.35-rc6-686/postinst/depmod-error-initrd-2.6.35-rc6-686: false
* linux-image-2.6.35-rc6-686/postinst/missing-firmware-2.6.35-rc6-686:
linux-image-2.6.35-rc6-686/prerm/removing-running-kernel-2.6.35-rc6-686: true
linux-image-2.6.35-rc6-686/postinst/ignoring-do-bootloader-2.6.35-rc6-686:
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
