Package: xserver-xorg-video-vesa
Version: 1:2.3.0-3
Severity: normal
Since upgrading PC to testing (Squeeze) occasionally when scrolling through
large areas of text in Iceweasel the display of the text area corrupts as if
the positioning of the new area being scrolled onto the screen is a few pixels
out vertically. Often it seems to repeat a region of the text a few pixels high
many time where the new text should be.
I haven't reproduced this outside of Iceweasel, but suspect this is an X issue,
hence choice of reporting against the X.org driver. Understand if this is
immediately reassigned.
Attempts to use an Iceweasel snapshot plugin doesn't capture the issue, as the
screen is redrawn/refreshed in some way immediately the snapshot tool is
invoked. I have a photograph of the problem when it occurs, but it is
intermittent making it hard to test.
Aside from searching for similar bugs in Debian and elsewhere I've not yet made
serious efforts to resolve myself. I will try disabling "smooth scrolling" in
the Iceweasel advanced tab.
Any advice on recreating such issues may be useful. Typically if a page has the
problem scrolling up and down a few times will get it redrawn correctly, or
attempting to snapshot the problem area. Once a page is rendered correctly, the
problem is not seen viewing that page, so presumably at that point a correct
bitmap is cached at some level (apps or X).
-- Package-specific info:
/var/lib/x11/X.roster does not exist.
/var/lib/x11/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 13 Feb 3 02:37 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1725304 Jul 15 17:15 /usr/bin/Xorg
/var/lib/x11/xorg.conf.roster does not exist.
VGA-compatible devices on PCI bus:
02:00.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
/etc/X11/xorg.conf does not exist.
Kernel version (/proc/version):
Linux version 2.6.32-5-686 (Debian 2.6.32-15) (b...@decadent.org.uk) (gcc
version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 04:59:47 UTC 2010
Xorg X server log files on system:
-rw-r--r-- 1 root root 34121 Jul 30 07:46 /var/log/Xorg.20.log
-rw-r--r-- 1 root root 43674 Jul 30 07:47 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.14-dsa-ia32 i686 Debian
Current Operating System: Linux derek 2.6.32-5-686 #1 SMP Tue Jun 1 04:59:47
UTC 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686
root=/dev/mapper/VG00-root ro rootdelay=10 quiet
Build Date: 03 June 2010 04:08:50PM
xorg-server 2:1.7.7-2 (Julien Cristau <jcris...@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 18 18:29:35 2010
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
(II) Loader magic: 0x81eac60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:2:0:0) 1002:4752:1002:8008 ATI Technologies Inc Rage XL rev 39,
Mem @ 0xfd000000/16777216, 0xfe9df000/4096, I/O @ 0x0000de00/256, BIOS @
0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched ati as autoconfigured driver 0
(==) Matched vesa as autoconfigured driver 1
(==) Matched fbdev as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 6.13.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "mach64"
(II) Loading /usr/lib/xorg/modules/drivers/mach64_drv.so
(II) Module mach64: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 6.8.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 0.4.2
ABI class: X.Org Video Driver, version 6.0
(II) MACH64: Driver for ATI Mach64 chipsets
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 0...@00:00:0
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.0.2
ABI class: X.Org Video Driver, version 6.0
(EE) open /dev/fb0: No such file or directory
(II) MACH64(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) MACH64(0): Depth 24, (--) framebuffer bpp 32
(==) MACH64(0): Using XAA acceleration architecture
(II) MACH64: Mach64 in slot 2:0:0 detected.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) MACH64(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Video Driver, version 6.0
(II) MACH64(0): VESA BIOS detected
(II) MACH64(0): VESA VBE Version 2.0
(II) MACH64(0): VESA VBE Total Mem: 8128 kB
(II) MACH64(0): VESA VBE OEM: ATI MACH64
(II) MACH64(0): VESA VBE OEM Software Rev: 1.0
(II) MACH64(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) MACH64(0): VESA VBE OEM Product: MACH64GM
(II) MACH64(0): VESA VBE OEM Product Rev: 01.00
(II) MACH64(0): VESA VBE DDC supported
(II) MACH64(0): VESA VBE DDC Level 2
(II) MACH64(0): VESA VBE DDC transfer in appr. 2 sec.
(II) MACH64(0): VESA VBE DDC read successfully
(II) MACH64(0): Manufacturer: GSM Model: 3b2f Serial#: 1724
(II) MACH64(0): Year: 2001 Week: 7
(II) MACH64(0): EDID Version: 1.3
(II) MACH64(0): Analog Display Input, Input Voltage Level: 0.714/0.286 V
(II) MACH64(0): Sync: Separate
(II) MACH64(0): Max Image Size [cm]: horiz.: 31 vert.: 23
(II) MACH64(0): Gamma: 2.50
(II) MACH64(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) MACH64(0): First detailed timing not preferred mode in violation of
standard!
(II) MACH64(0): redX: 0.630 redY: 0.340 greenX: 0.300 greenY: 0.600
(II) MACH64(0): blueX: 0.140 blueY: 0.100 whiteX: 0.323 whiteY: 0.340
(II) MACH64(0): Supported established timings:
(II) MACH64(0): 720x...@70hz
(II) MACH64(0): 640x...@60hz
(II) MACH64(0): 640x...@67hz
(II) MACH64(0): 640x...@72hz
(II) MACH64(0): 640x...@75hz
(II) MACH64(0): 800x...@56hz
(II) MACH64(0): 800x...@60hz
(II) MACH64(0): 800x...@72hz
(II) MACH64(0): 800x...@75hz
(II) MACH64(0): 832x...@75hz
(II) MACH64(0): 1024x...@60hz
(II) MACH64(0): 1024x...@70hz
(II) MACH64(0): 1024x...@75hz
(II) MACH64(0): Manufacturer's mask: 0
(II) MACH64(0): Supported standard timings:
(II) MACH64(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
(II) MACH64(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
(II) MACH64(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
(II) MACH64(0): Supported detailed timing:
(II) MACH64(0): clock: 65.0 MHz Image Size: 307 x 230 mm
(II) MACH64(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344
h_border: 0
(II) MACH64(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806
v_border: 0
(II) MACH64(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 61 kHz,
PixClock max 80 MHz
(II) MACH64(0): Monitor name: FLATRON LCD 5
(II) MACH64(0): Monitor name: 63LE
(II) MACH64(0): EDID (in hex):
(II) MACH64(0): 00ffffffffffff001e6d2f3bbc060000
(II) MACH64(0): 070b0103281f1796e84eeca1574c9923
(II) MACH64(0): 195257bfee00314f454f614f01010101
(II) MACH64(0): 01010101010164190040410026301888
(II) MACH64(0): 360033e610000018000000fd00384b1f
(II) MACH64(0): 3d08000a202020202020000000fc0046
(II) MACH64(0): 4c4154524f4e204c43442035000000fc
(II) MACH64(0): 0036334c450a20202020202020200073
(II) MACH64(0): EDID vendor "GSM", prod id 15151
(II) MACH64(0): Using EDID range info for horizontal sync
(II) MACH64(0): Using EDID range info for vertical refresh
(II) MACH64(0): Printing DDC gathered Modelines:
(II) MACH64(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771
777 806 -hsync -vsync (48.4 kHz)
(II) MACH64(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605
628 +hsync +vsync (37.9 kHz)
(II) MACH64(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603
625 +hsync +vsync (35.2 kHz)
(II) MACH64(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484
500 -hsync -vsync (37.5 kHz)
(II) MACH64(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492
520 -hsync -vsync (37.9 kHz)
(II) MACH64(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486
525 -hsync -vsync (35.0 kHz)
(II) MACH64(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492
525 -hsync -vsync (31.5 kHz)
(II) MACH64(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414
449 -hsync +vsync (31.5 kHz)
(II) MACH64(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769
772 800 +hsync +vsync (60.0 kHz)
(II) MACH64(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771
777 806 -hsync -vsync (56.5 kHz)
(II) MACH64(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628
667 -hsync -vsync (49.7 kHz)
(II) MACH64(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604
625 +hsync +vsync (46.9 kHz)
(II) MACH64(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643
666 +hsync +vsync (48.1 kHz)
(II) MACH64(0): BIOS Data: BIOSSize=0x8000, ROMTable=0x010E.
(II) MACH64(0): BIOS Data: ClockTable=0x084C, FrequencyTable=0x0000.
(II) MACH64(0): BIOS Data: LCDTable=0x0000.
(II) MACH64(0): BIOS Data: VideoTable=0x0000, HardwareTable=0x0158.
(II) MACH64(0): BIOS Data: I2CType=0x0F, Tuner=0x00, Decoder=0x00, Audio=0x0F.
(--) MACH64(0): ATI 3D Rage XL or XC graphics controller detected.
(--) MACH64(0): Chip type 4752 "GR", version 7, foundry TSMC, class 0, revision
0x00.
(--) MACH64(0): PCI bus interface detected; block I/O base is 0xDE00.
(--) MACH64(0): ATI Mach64 adapter detected.
(!!) MACH64(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) MACH64(0): Internal RAMDAC (subtype 1) detected.
(==) MACH64(0): RGB weight 888
(==) MACH64(0): Default visual is TrueColor
(==) MACH64(0): Using gamma correction (1.0, 1.0, 1.0)
(II) MACH64(0): Using Mach64 accelerator CRTC.
(II) MACH64(0): Storing hardware cursor image at 0xFD7FFC00.
(II) MACH64(0): Using 8 MB linear aperture at 0xFD000000.
(!!) MACH64(0): Virtual resolutions will be limited to 8191 kB
due to linear aperture size and/or placement of hardware cursor image area.
(II) MACH64(0): Using Block 0 MMIO aperture at 0xFE9DF400.
(II) MACH64(0): Using Block 1 MMIO aperture at 0xFE9DF000.
(II) MACH64(0): MMIO write caching enabled.
(--) MACH64(0): 8192 kB of SGRAM (2:1) 32-bit detected (using 8191 kB).
(WW) MACH64(0): Cannot shadow an accelerated frame buffer.
(II) MACH64(0): Engine XCLK 62.815 MHz; Refresh rate code 1.
(--) MACH64(0): Internal programmable clock generator detected.
(--) MACH64(0): Reference clock 157.5/11 (14.318) MHz.
(II) MACH64(0): <default monitor>: Using hsync range of 31.00-61.00 kHz
(II) MACH64(0): <default monitor>: Using vrefresh range of 56.00-75.00 Hz
(II) MACH64(0): <default monitor>: Using maximum pixel clock of 80.00 MHz
(II) MACH64(0): Estimated virtual size for aspect ratio 1.3478 is 1024x768
(II) MACH64(0): Maximum clock: 125.00 MHz
(II) MACH64(0): Not using default mode "640x350" (vrefresh out of range)
(II) MACH64(0): Not using default mode "320x175" (vrefresh out of range)
(II) MACH64(0): Not using default mode "640x400" (vrefresh out of range)
(II) MACH64(0): Not using default mode "320x200" (vrefresh out of range)
(II) MACH64(0): Not using default mode "720x400" (vrefresh out of range)
(II) MACH64(0): Not using default mode "360x200" (vrefresh out of range)
(II) MACH64(0): Not using default mode "640x480" (vrefresh out of range)
(II) MACH64(0): Not using default mode "320x240" (vrefresh out of range)
(II) MACH64(0): Not using default mode "800x600" (vrefresh out of range)
(II) MACH64(0): Not using default mode "400x300" (vrefresh out of range)
(II) MACH64(0): Not using default mode "1024x768" (vrefresh out of range)
(II) MACH64(0): Not using default mode "512x384" (vrefresh out of range)
(II) MACH64(0): Not using default mode "1024x768" (hsync out of range)
(II) MACH64(0): Not using default mode "512x384" (hsync out of range)
(II) MACH64(0): Not using default mode "1152x864" (width too large for virtual
size)
(II) MACH64(0): Not using default mode "576x432" (hsync out of range)
(II) MACH64(0): Not using default mode "1280x960" (width too large for virtual
size)
(II) MACH64(0): Not using default mode "1280x960" (width too large for virtual
size)
(II) MACH64(0): Not using default mode "640x480" (hsync out of range)
(II) MACH64(0): Not using default mode "1280x1024" (width too large for virtual
size)
(II) MACH64(0): Not using default mode "640x512" (hsync out of range)
(II) MACH64(0): Not using default mode "1280x1024" (width too large for virtual
size)
(II) MACH64(0): Not using default mode "640x512" (hsync out of range)
(II) MACH64(0): Not using default mode "1280x1024" (width too large for virtual
size)
(II) MACH64(0): Not using default mode "640x512" (hsync out of range)
(II) MACH64(0): Not using default mode "1600x1200" (width too large for virtual
size)
(II) MACH64(0): Not using default mode "800x600" (hsync out of range)
(II) MACH64(0): Not using default mode "1600x1200" (width too large for virtual
size)
(II) MACH64(0): Not using default mode "800x600" (hsync out of range)
(II) MACH64(0): Not using default mode "1600x1200" (width too large for virtual
size)
(II) MACH64(0): Not using default mode "800x600" (hsync out of range)
(II) MACH64(0): Not using default mode "1600x1200" (width too large for virtual
size)
(II) MACH64(0): Not using default mode "800x600" (hsync out of range)
(II) MACH64(0): Not using default mode "1600x1200" (width too large for virtual
size)
(II) MACH64(0): Not using default mode "800x600" (hsync out of range)
(II) MACH64(0): Not using default mode "1792x1344" (insufficient memory for
mode)
(II) MACH64(0): Not using default mode "896x672" (hsync out of range)
(II) MACH64(0): Not using default mode "1792x1344" (insufficient memory for
mode)
(II) MACH64(0): Not using default mode "896x672" (bad mode
clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "1856x1392" (insufficient memory for
mode)
(II) MACH64(0): Not using default mode "928x696" (hsync out of range)
(II) MACH64(0): Not using default mode "1856x1392" (insufficient memory for
mode)
(II) MACH64(0): Not using default mode "928x696" (bad mode
clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) MACH64(0): Not using default mode "960x720" (hsync out of range)
(II) MACH64(0): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) MACH64(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "1152x864" (width too large for virtual
size)
(II) MACH64(0): Not using default mode "1152x864" (width too large for virtual
size)
(II) MACH64(0): Not using default mode "576x432" (hsync out of range)
(II) MACH64(0): Not using default mode "1152x864" (width too large for virtual
size)
(II) MACH64(0): Not using default mode "576x432" (hsync out of range)
(II) MACH64(0): Not using default mode "1152x864" (width too large for virtual
size)
(II) MACH64(0): Not using default mode "576x432" (hsync out of range)
(II) MACH64(0): Not using default mode "1152x864" (width too large for virtual
size)
(II) MACH64(0): Not using default mode "576x432" (hsync out of range)
(II) MACH64(0): Not using default mode "1152x864" (width too large for virtual
size)
(II) MACH64(0): Not using default mode "576x432" (hsync out of range)
(II) MACH64(0): Not using default mode "1360x768" (width too large for virtual
size)
(II) MACH64(0): Not using default mode "1360x768" (width too large for virtual
size)
(II) MACH64(0): Not using default mode "1400x1050" (width too large for virtual
size)
(II) MACH64(0): Not using default mode "700x525" (hsync out of range)
(II) MACH64(0): Not using default mode "1400x1050" (width too large for virtual
size)
(II) MACH64(0): Not using default mode "700x525" (hsync out of range)
(II) MACH64(0): Not using default mode "1400x1050" (width too large for virtual
size)
(II) MACH64(0): Not using default mode "700x525" (hsync out of range)
(II) MACH64(0): Not using default mode "1400x1050" (width too large for virtual
size)
(II) MACH64(0): Not using default mode "700x525" (hsync out of range)
(II) MACH64(0): Not using default mode "1440x900" (width too large for virtual
size)
(II) MACH64(0): Not using default mode "1600x1024" (width too large for virtual
size)
(II) MACH64(0): Not using default mode "800x512" (hsync out of range)
(II) MACH64(0): Not using default mode "1680x1050" (width too large for virtual
size)
(II) MACH64(0): Not using default mode "840x525" (hsync out of range)
(II) MACH64(0): Not using default mode "1680x1050" (width too large for virtual
size)
(II) MACH64(0): Not using default mode "840x525" (hsync out of range)
(II) MACH64(0): Not using default mode "1680x1050" (width too large for virtual
size)
(II) MACH64(0): Not using default mode "840x525" (hsync out of range)
(II) MACH64(0): Not using default mode "1680x1050" (width too large for virtual
size)
(II) MACH64(0): Not using default mode "840x525" (hsync out of range)
(II) MACH64(0): Not using default mode "1680x1050" (width too large for virtual
size)
(II) MACH64(0): Not using default mode "840x525" (hsync out of range)
(II) MACH64(0): Not using default mode "1920x1080" (width too large for virtual
size)
(II) MACH64(0): Not using default mode "960x540" (hsync out of range)
(II) MACH64(0): Not using default mode "1920x1200" (insufficient memory for
mode)
(II) MACH64(0): Not using default mode "960x600" (hsync out of range)
(II) MACH64(0): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) MACH64(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "2048x1536" (insufficient memory for
mode)
(II) MACH64(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "2048x1536" (insufficient memory for
mode)
(II) MACH64(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "2048x1536" (insufficient memory for
mode)
(II) MACH64(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(--) MACH64(0): Virtual size is 1024x768 (pitch 1024)
(**) MACH64(0): *Driver mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) MACH64(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769
772 800 +hsync +vsync (60.0 kHz)
(**) MACH64(0): *Driver mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) MACH64(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771
777 806 -hsync -vsync (56.5 kHz)
(**) MACH64(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) MACH64(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771
777 806 -hsync -vsync (48.4 kHz)
(**) MACH64(0): *Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) MACH64(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769
772 800 +hsync +vsync (60.0 kHz)
(**) MACH64(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) MACH64(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771
777 806 -hsync -vsync (56.5 kHz)
(**) MACH64(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) MACH64(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771
777 806 -hsync -vsync (48.4 kHz)
(**) MACH64(0): *Driver mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) MACH64(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628
667 -hsync -vsync (49.7 kHz)
(**) MACH64(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) MACH64(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628
667 -hsync -vsync (49.7 kHz)
(**) MACH64(0): *Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) MACH64(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604
625 +hsync +vsync (46.9 kHz)
(**) MACH64(0): *Driver mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) MACH64(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643
666 +hsync +vsync (48.1 kHz)
(**) MACH64(0): *Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) MACH64(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605
628 +hsync +vsync (37.9 kHz)
(**) MACH64(0): *Driver mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) MACH64(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603
625 +hsync +vsync (35.2 kHz)
(**) MACH64(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) MACH64(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604
625 +hsync +vsync (46.9 kHz)
(**) MACH64(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) MACH64(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643
666 +hsync +vsync (48.1 kHz)
(**) MACH64(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) MACH64(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605
628 +hsync +vsync (37.9 kHz)
(**) MACH64(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) MACH64(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603
625 +hsync +vsync (35.2 kHz)
(**) MACH64(0): *Default mode "720x450": 53.2 MHz, 55.9 kHz, 59.9 Hz (D)
(II) MACH64(0): Modeline "720x450"x59.9 53.25 720 760 836 952 450 451 454
467 doublescan -hsync +vsync (55.9 kHz)
(**) MACH64(0): *Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) MACH64(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484
500 -hsync -vsync (37.5 kHz)
(**) MACH64(0): *Driver mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) MACH64(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492
520 -hsync -vsync (37.9 kHz)
(**) MACH64(0): *Driver mode "640x480": 30.2 MHz, 35.0 kHz, 66.7 Hz
(II) MACH64(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486
525 -hsync -vsync (35.0 kHz)
(**) MACH64(0): *Driver mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) MACH64(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492
525 -hsync -vsync (31.5 kHz)
(**) MACH64(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) MACH64(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484
500 -hsync -vsync (37.5 kHz)
(**) MACH64(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) MACH64(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492
520 -hsync -vsync (37.9 kHz)
(**) MACH64(0): *Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) MACH64(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482
500 doublescan +hsync +vsync (60.0 kHz)
(**) MACH64(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) MACH64(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492
525 -hsync -vsync (31.5 kHz)
(**) MACH64(0): *Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
(II) MACH64(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414
449 -hsync +vsync (31.5 kHz)
(**) MACH64(0): *Default mode "680x384": 36.0 MHz, 47.4 kHz, 60.0 Hz (D)
(II) MACH64(0): Modeline "680x384"x60.0 36.00 680 704 720 760 384 385 390
395 doublescan +hsync -vsync (47.4 kHz)
(**) MACH64(0): *Default mode "680x384": 42.4 MHz, 47.7 kHz, 59.8 Hz (D)
(II) MACH64(0): Modeline "680x384"x59.8 42.38 680 716 784 888 384 385 390
399 doublescan -hsync +vsync (47.7 kHz)
(**) MACH64(0): *Default mode "576x432": 40.8 MHz, 53.7 kHz, 60.1 Hz (D)
(II) MACH64(0): Modeline "576x432"x60.1 40.81 576 608 668 760 432 432 434
447 doublescan -hsync +vsync (53.7 kHz)
(**) MACH64(0): *Default mode "512x384": 39.4 MHz, 60.0 kHz, 75.0 Hz (D)
(II) MACH64(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386
400 doublescan +hsync +vsync (60.0 kHz)
(**) MACH64(0): *Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) MACH64(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388
403 doublescan -hsync -vsync (56.5 kHz)
(**) MACH64(0): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) MACH64(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388
403 doublescan -hsync -vsync (48.4 kHz)
(**) MACH64(0): *Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) MACH64(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314
333 doublescan -hsync -vsync (49.7 kHz)
(**) MACH64(0): *Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) MACH64(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302
312 doublescan +hsync +vsync (46.9 kHz)
(**) MACH64(0): *Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) MACH64(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321
333 doublescan +hsync +vsync (48.1 kHz)
(**) MACH64(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) MACH64(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302
314 doublescan +hsync +vsync (37.9 kHz)
(**) MACH64(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) MACH64(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301
312 doublescan +hsync +vsync (35.2 kHz)
(**) MACH64(0): *Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) MACH64(0): Modeline "320x240"x75.0 15.75 320 328 360 420 240 240 242
250 doublescan -hsync -vsync (37.5 kHz)
(**) MACH64(0): *Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) MACH64(0): Modeline "320x240"x72.8 15.75 320 332 352 416 240 244 246
260 doublescan -hsync -vsync (37.9 kHz)
(**) MACH64(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) MACH64(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246
262 doublescan -hsync -vsync (31.5 kHz)
(**) MACH64(0): Display dimensions: (310, 230) mm
(**) MACH64(0): DPI set to (83, 84)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.2.1
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) MACH64(0): I2C bus "Mach64" initialized.
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
(--) Depth 24 pixmap format is 32 bpp
(II) MACH64(0): [drm] SAREA 2200+1208: 3408
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
[drm] failed to load kernel module "mach64"
(EE) [drm] drmOpen failed.
(EE) MACH64(0): [dri] DRIScreenInit Failed
(II) MACH64(0): Largest offscreen areas (with overlaps):
(II) MACH64(0): 1024 x 1279 rectangle at 0,768
(II) MACH64(0): 768 x 1280 rectangle at 0,768
(II) MACH64(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Setting up tile and stipple cache:
32 128x128 slots
10 256x256 slots
(==) MACH64(0): Backing store disabled
(==) MACH64(0): Silken mouse enabled
(==) MACH64(0): DPMS enabled
(II) MACH64(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(II) config/udev: Adding input device PWC snapshot button (/dev/input/event5)
(**) PWC snapshot button: Applying InputClass "evdev keyboard catchall"
(**) PWC snapshot button: always reports core events
(**) PWC snapshot button: Device: "/dev/input/event5"
(II) PWC snapshot button: Found keys
(II) PWC snapshot button: Configuring as keyboard
(II) XINPUT: Adding extended input device "PWC snapshot button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(II) config/udev: Adding input device HID 062a:0000 (/dev/input/event1)
(**) HID 062a:0000: Applying InputClass "evdev pointer catchall"
(**) HID 062a:0000: always reports core events
(**) HID 062a:0000: Device: "/dev/input/event1"
(II) HID 062a:0000: Found 3 mouse buttons
(II) HID 062a:0000: Found scroll wheel(s)
(II) HID 062a:0000: Found relative axes
(II) HID 062a:0000: Found x and y relative axes
(II) HID 062a:0000: Configuring as mouse
(**) HID 062a:0000: YAxisMapping: buttons 4 and 5
(**) HID 062a:0000: EmulateWheelButton: 4, EmulateWheelInertia: 10,
EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "HID 062a:0000" (type: MOUSE)
(II) HID 062a:0000: initialized for relative axes.
(II) config/udev: Adding input device HID 062a:0000 (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard
(/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type:
KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(II) config/udev: Adding input device PC Speaker (/dev/input/event4)
(II) No input driver/identifier specified (ignoring)
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PWC snapshot button: Device reopened after 1 attempts.
(II) HID 062a:0000: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PWC snapshot button: Device reopened after 1 attempts.
(II) HID 062a:0000: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PWC snapshot button: Device reopened after 1 attempts.
(II) HID 062a:0000: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PWC snapshot button: Device reopened after 1 attempts.
(II) HID 062a:0000: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PWC snapshot button: Device reopened after 1 attempts.
(II) HID 062a:0000: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PWC snapshot button: Device reopened after 1 attempts.
(II) HID 062a:0000: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PWC snapshot button: Device reopened after 1 attempts.
(II) HID 062a:0000: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PWC snapshot button: Device reopened after 1 attempts.
(II) HID 062a:0000: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PWC snapshot button: Device reopened after 1 attempts.
(II) HID 062a:0000: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PWC snapshot button: Device reopened after 1 attempts.
(II) HID 062a:0000: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PWC snapshot button: Device reopened after 1 attempts.
(II) HID 062a:0000: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PWC snapshot button: Device reopened after 1 attempts.
(II) HID 062a:0000: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PWC snapshot button: Device reopened after 1 attempts.
(II) HID 062a:0000: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PWC snapshot button: Device reopened after 1 attempts.
(II) HID 062a:0000: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PWC snapshot button: Device reopened after 1 attempts.
(II) HID 062a:0000: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PWC snapshot button: Device reopened after 1 attempts.
(II) HID 062a:0000: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PWC snapshot button: Device reopened after 1 attempts.
(II) HID 062a:0000: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PWC snapshot button: Device reopened after 1 attempts.
(II) HID 062a:0000: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PWC snapshot button: Device reopened after 1 attempts.
(II) HID 062a:0000: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PWC snapshot button: Device reopened after 1 attempts.
(II) HID 062a:0000: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PWC snapshot button: Device reopened after 1 attempts.
(II) HID 062a:0000: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PWC snapshot button: Device reopened after 1 attempts.
(II) HID 062a:0000: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PWC snapshot button: Device reopened after 1 attempts.
(II) HID 062a:0000: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PWC snapshot button: Device reopened after 1 attempts.
(II) HID 062a:0000: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PWC snapshot button: Device reopened after 1 attempts.
(II) HID 062a:0000: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PWC snapshot button: Device reopened after 1 attempts.
(II) HID 062a:0000: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PWC snapshot button: Device reopened after 1 attempts.
(II) HID 062a:0000: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PWC snapshot button: Device reopened after 1 attempts.
(II) HID 062a:0000: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) PWC snapshot button: Device reopened after 1 attempts.
(II) HID 062a:0000: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
udev information:
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3
N: input/event3
S: char/13:67
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3
E: SUBSYSTEM=input
E: DEVNAME=input/event3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=gb
E: MAJOR=13
E: MINOR=67
E: DEVLINKS=/dev/char/13:67
E: DMI_VENDOR=Dell Computer Corporation
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2
N: input/event2
S: char/13:66
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2
E: SUBSYSTEM=input
E: DEVNAME=input/event2
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=gb
E: MAJOR=13
E: MINOR=66
E: DEVLINKS=/dev/char/13:66
E: DMI_VENDOR=Dell Computer Corporation
P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/input/input5/event5
N: input/event5
S: char/13:69
S: input/by-path/pci-0000:00:1d.0-event
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/input/input5/event5
E: SUBSYSTEM=input
E: DEVNAME=input/event5
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=pci-0000:00:1d.0
E: XKBMODEL=pc105
E: XKBLAYOUT=gb
E: MAJOR=13
E: MINOR=69
E: DEVLINKS=/dev/char/13:69 /dev/input/by-path/pci-0000:00:1d.0-event
P: /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.3/1-4.3:1.0/input/input1/event1
N: input/event1
S: char/13:65
S: input/by-id/usb-062a_0000-event-mouse
S: input/by-path/pci-0000:00:1d.7-usb-0:4.3:1.0-event-mouse
E: UDEV_LOG=3
E:
DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.3/1-4.3:1.0/input/input1/event1
E: SUBSYSTEM=input
E: DEVNAME=input/event1
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=062a
E: ID_VENDOR_ENC=062a
E: ID_VENDOR_ID=062a
E: ID_MODEL=0000
E: ID_MODEL_ENC=0000
E: ID_MODEL_ID=0000
E: ID_REVISION=0000
E: ID_SERIAL=062a_0000
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1d.7-usb-0:4.3:1.0
E: MAJOR=13
E: MINOR=65
E: DEVLINKS=/dev/char/13:65 /dev/input/by-id/usb-062a_0000-event-mouse
/dev/input/by-path/pci-0000:00:1d.7-usb-0:4.3:1.0-event-mouse
P: /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.3/1-4.3:1.0/input/input1/mouse0
N: input/mouse0
S: char/13:32
S: input/by-id/usb-062a_0000-mouse
S: input/by-path/pci-0000:00:1d.7-usb-0:4.3:1.0-mouse
E: UDEV_LOG=3
E:
DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.3/1-4.3:1.0/input/input1/mouse0
E: SUBSYSTEM=input
E: DEVNAME=input/mouse0
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=062a
E: ID_VENDOR_ENC=062a
E: ID_VENDOR_ID=062a
E: ID_MODEL=0000
E: ID_MODEL_ENC=0000
E: ID_MODEL_ID=0000
E: ID_REVISION=0000
E: ID_SERIAL=062a_0000
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1d.7-usb-0:4.3:1.0
E: MAJOR=13
E: MINOR=32
E: DEVLINKS=/dev/char/13:32 /dev/input/by-id/usb-062a_0000-mouse
/dev/input/by-path/pci-0000:00:1d.7-usb-0:4.3:1.0-mouse
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: char/13:64
S: input/by-path/platform-i8042-serio-0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: SUBSYSTEM=input
E: DEVNAME=input/event0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: XKBMODEL=pc105
E: XKBLAYOUT=gb
E: MAJOR=13
E: MINOR=64
E: DEVLINKS=/dev/char/13:64 /dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DMI_VENDOR=Dell Computer Corporation
P: /devices/platform/pcspkr/input/input4/event4
N: input/event4
S: char/13:68
S: input/by-path/platform-pcspkr-event-spkr
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/pcspkr/input/input4/event4
E: SUBSYSTEM=input
E: DEVNAME=input/event4
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: DMI_VENDOR=Dell Computer Corporation
E: MAJOR=13
E: MINOR=68
E: DEVLINKS=/dev/char/13:68 /dev/input/by-path/platform-pcspkr-event-spkr
DRM Information from dmesg:
[ 1.194714] Linux agpgart interface v0.103
[ 1.194832] agpgart-intel 0000:00:00.0: Intel i875 Chipset
[ 1.199995] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-video-vesa depends on:
ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib
ii libdrm2 2.4.18-6 Userspace interface to kernel DRM
ii xserver-xorg-core [xorg-video 2:1.7.7-3 Xorg X server - core server
xserver-xorg-video-vesa recommends no packages.
xserver-xorg-video-vesa suggests no packages.
-- no debconf information
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
