Subject: gnome-user-share: Fails to recieve all contacts from k660i
Package: gnome-user-share
Version: 2.30.0-1
Severity: normal
*** Please type your report below this line ***
I am trying to transfer all my contacts from a Sony-Ericsson K660i. I
select to send by bluetooth,
select my computer and a moment later the phone claims that the remote
unit did not accept the file.
In a short flash, the phone shows a message that it is sending the file
"Whole-Ph~.vcf".
I have attached hcidump of the session.
Sending single contacts (vCard.vcf) or other files (mp3, photos, videos)
works just fine.
Is the ~ in the file name the problem?
Best regards
/Rasmus Bøg Hansen
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.34.1 (SMP w/2 CPU cores)
Locale: LANG=da_DK.UTF-8, LC_CTYPE=da_DK.UTF-8 (charmap=UTF-8) (ignored:
LC_ALL set to da_DK.UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages gnome-user-share depends on:
ii apache2.2-bin 2.2.15-5 Apache HTTP Server common
binary f
ii gconf2 2.28.1-3 GNOME configuration
database syste
ii gnome-bluetooth 2.30.0-2 GNOME Bluetooth tools
ii libapache2-mod-dnssd 0.6-2 Zeroconf support for Apache
2 via
ii libatk1.0-0 1.30.0-1 The ATK accessibility toolkit
ii libc6 2.11.2-2 Embedded GNU C Library:
Shared lib
ii libcairo2 1.8.10-4 The Cairo 2D vector
graphics libra
ii libcanberra-gtk0 0.24-1 Gtk+ helper for playing
widget eve
ii libcanberra0 0.24-1 a simple abstract interface
for pl
ii libdbus-1-3 1.2.24-1 simple interprocess
messaging syst
ii libdbus-glib-1-2 0.86-1 simple interprocess
messaging syst
ii libfontconfig1 2.8.0-2.1 generic font configuration
library
ii libfreetype6 2.4.0-2 FreeType 2 font engine,
shared lib
ii libgconf2-4 2.28.1-3 GNOME configuration
database syste
ii libglib2.0-0 2.24.1-1 The GLib library of C routines
ii libgnome-bluetooth7 2.30.0-2 GNOME Bluetooth tools -
support li
ii libgtk2.0-0 2.20.1-1 The GTK+ graphical user
interface
ii libnautilus-extension1 2.30.1-1 libraries for nautilus
components
ii libnotify1 [libnotify1-gtk2.1 0.5.0-2 sends desktop notifications
to a n
ii libpango1.0-0 1.28.1-1 Layout and rendering of
internatio
ii libselinux1 2.0.94-1 SELinux runtime shared
libraries
ii libunique-1.0-0 1.1.6-1 Library for writing single
instanc
ii libx11-6 2:1.3.3-3 X11 client-side library
ii obex-data-server 0.4.5-1+b1 D-Bus service for OBEX
client and
gnome-user-share recommends no packages.
gnome-user-share suggests no packages.
-- no debconf information
--
Rasmus Bøg Hansen || mo...@zz9.dk
C.F. Møllers Allé 46, 3tv || http://www.zz9.dk
2300 København S ||
HCI sniffer - Bluetooth packet analyzer ver 1.42
device: hci0 snap_len: 1028 filter: 0xffffffffffffffff
> HCI Event: Connect Request (0x04) plen 10
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Role Change (0x12) plen 8
> HCI Event: Connect Complete (0x03) plen 11
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Read Remote Supported Features (0x0b) plen 11
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Max Slots Change (0x1b) plen 3
> ACL data: handle 11 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0048
< ACL data: handle 11 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0048 result 1 status 0
Connection pending - No futher information available
< ACL data: handle 11 flags 0x02 dlen 10
L2CAP(s): Info req: type 2
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 11 flags 0x02 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x0000
< ACL data: handle 11 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0048 result 0 status 0
Connection successful
> ACL data: handle 11 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 1024
< ACL data: handle 11 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x0048 flags 0x00 result 0 clen 4
MTU 1024
< ACL data: handle 11 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0048 flags 0x00 clen 0
> HCI Event: Remote Name Req Complete (0x07) plen 255
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 11 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 11 flags 0x02 dlen 43
L2CAP(d): cid 0x0040 len 39 [psm 1]
SDP SSA Req: tid 0x7 len 0x22
pat uuid-16 0x111b (ImagingResp)
max 1500
aid(s) 0x0001 (SrvClassIDList) 0x0004 (ProtocolDescList) 0x0009
(BTProfileDescList) 0x0100 (SrvName) 0x0310 (SuppCapabilities) 0x0311
(SuppFeatures) 0x0312 (SuppFunctions) 0x0313 (SuppTotalCapacity)
cont 00
< ACL data: handle 11 flags 0x02 dlen 14
L2CAP(d): cid 0x0048 len 10 [psm 1]
SDP SSA Rsp: tid 0x7 len 0x5
count 2
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 11 flags 0x02 dlen 34
L2CAP(d): cid 0x0040 len 30 [psm 1]
SDP SSA Req: tid 0x8 len 0x19
pat uuid-16 0x1105 (OBEXObjPush)
max 1500
aid(s) 0x0001 (SrvClassIDList) 0x0004 (ProtocolDescList) 0x0009
(BTProfileDescList) 0x0100 (SrvName) 0x0303 (SuppFormatsList)
cont 00
< ACL data: handle 11 flags 0x02 dlen 99
L2CAP(d): cid 0x0048 len 95 [psm 1]
SDP SSA Rsp: tid 0x8 len 0x5a
count 87
record #0
aid 0x0001 (SrvClassIDList)
< uuid-16 0x1105 (OBEXObjPush) >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x9 > <
uuid-16 0x0008 (OBEX) > >
aid 0x0009 (BTProfileDescList)
< < uuid-16 0x1105 (OBEXObjPush) uint 0x100 > >
aid 0x0100 (SrvName)
str "OBEX Object Push"
aid 0x0303 (SuppFormatsList)
< uint 0x1 uint 0x2 uint 0x3 uint 0x4 uint 0x5 uint 0x6 uint
0xff >
cont 00
> ACL data: handle 11 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0048
< ACL data: handle 11 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0048
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Disconn Complete (0x05) plen 4
> HCI Event: Connect Request (0x04) plen 10
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Role Change (0x12) plen 8
> HCI Event: Connect Complete (0x03) plen 11
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
> HCI Event: Command Status (0x0f) plen 4
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
> HCI Event: Read Remote Supported Features (0x0b) plen 11
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Max Slots Change (0x1b) plen 3
> ACL data: handle 11 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0049
< ACL data: handle 11 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0049 result 1 status 0
Connection pending - No futher information available
< ACL data: handle 11 flags 0x02 dlen 10
L2CAP(s): Info req: type 2
> ACL data: handle 11 flags 0x02 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x0000
< ACL data: handle 11 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0049 result 0 status 0
Connection successful
> ACL data: handle 11 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 1024
< ACL data: handle 11 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x0049 flags 0x00 result 0 clen 4
MTU 1024
< ACL data: handle 11 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0049 flags 0x00 clen 0
> HCI Event: Remote Name Req Complete (0x07) plen 255
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 11 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 11 flags 0x02 dlen 24
L2CAP(d): cid 0x0040 len 20 [psm 1]
SDP SSA Req: tid 0x9 len 0xf
pat uuid-16 0x1105 (OBEXObjPush)
max 1500
aid(s) 0x0000 - 0xffff
cont 00
< ACL data: handle 11 flags 0x02 dlen 115
L2CAP(d): cid 0x0049 len 111 [psm 1]
SDP SSA Rsp: tid 0x9 len 0x6a
count 103
record #0
aid 0x0000 (SrvRecHndl)
uint 0x10009
aid 0x0001 (SrvClassIDList)
< uuid-16 0x1105 (OBEXObjPush) >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x9 > <
uuid-16 0x0008 (OBEX) > >
aid 0x0005 (BrwGrpList)
< uuid-16 0x1002 (PubBrwsGrp) >
aid 0x0009 (BTProfileDescList)
< < uuid-16 0x1105 (OBEXObjPush) uint 0x100 > >
aid 0x0100 (SrvName)
str "OBEX Object Push"
aid 0x0303 (SuppFormatsList)
< uint 0x1 uint 0x2 uint 0x3 uint 0x4 uint 0x5 uint 0x6 uint
0xff >
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 11 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x004a
< ACL data: handle 11 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0041 scid 0x004a result 0 status 0
Connection successful
> ACL data: handle 11 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 4
MTU 1024
< ACL data: handle 11 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x004a flags 0x00 result 0 clen 4
MTU 1024
< ACL data: handle 11 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x004a flags 0x00 clen 4
MTU 1013
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 11 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 4
MTU 1013
> ACL data: handle 11 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
< ACL data: handle 11 flags 0x02 dlen 8
L2CAP(d): cid 0x004a len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 11 flags 0x02 dlen 19
L2CAP(d): cid 0x0041 len 15 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 18 frame_type 0 credit_flow 15 pri 0 ack_timer 0
frame_size 1007 max_retrans 0 credits 7
< ACL data: handle 11 flags 0x02 dlen 18
L2CAP(d): cid 0x004a len 14 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 18 frame_type 0 credit_flow 14 pri 0 ack_timer 0
frame_size 1007 max_retrans 0 credits 7
> ACL data: handle 11 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 18 pf 1 ilen 0 fcs 0x32
< ACL data: handle 11 flags 0x02 dlen 8
L2CAP(d): cid 0x004a len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 18 pf 1 ilen 0 fcs 0xf9
< ACL data: handle 11 flags 0x02 dlen 12
L2CAP(d): cid 0x004a len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 18 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 11 flags 0x02 dlen 9
L2CAP(d): cid 0x0041 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 18 pf 1 ilen 0 fcs 0xd2 credits 13
> ACL data: handle 11 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0049
< ACL data: handle 11 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0049
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 11 flags 0x02 dlen 13
L2CAP(d): cid 0x0041 len 9 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 18 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 0 b3 1 len 10
< ACL data: handle 11 flags 0x02 dlen 12
L2CAP(d): cid 0x004a len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 18 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
> ACL data: handle 11 flags 0x02 dlen 13
L2CAP(d): cid 0x0041 len 9 [psm 3]
RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 18 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 0 b3 1 len 10
< ACL data: handle 11 flags 0x02 dlen 9
L2CAP(d): cid 0x004a len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 18 pf 1 ilen 0 fcs 0x8 credits 33
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 11 flags 0x02 dlen 16
L2CAP(d): cid 0x0041 len 12 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 18 pf 0 ilen 7 fcs 0xce
OBEX: Connect cmd(f): len 7 version 1.0 flags 0 mtu 12288
> ACL data: handle 11 flags 0x02 dlen 12
L2CAP(d): cid 0x0041 len 8 [psm 3]
RFCOMM(s): RPN CMD: cr 1 dlci 0 pf 0 ilen 3 fcs 0x70 mcc_len 1
dlci 18 br 112 db 0 sb 0 p 0 pt 0 xi 0 xo 0
rtri 0 rtro 0 rtci 1 rtco 1 xon 0 xoff 206 pm 0xaa07
< ACL data: handle 11 flags 0x02 dlen 18
L2CAP(d): cid 0x004a len 14 [psm 3]
RFCOMM(s): RPN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 18 br 7 db 3 sb 0 p 0 pt 0 xi 0 xo 0
rtri 0 rtro 0 rtci 0 rtco 0 xon 17 xoff 19 pm 0x3f7f
> ACL data: handle 11 flags 0x02 dlen 12
L2CAP(d): cid 0x0041 len 8 [psm 3]
RFCOMM(s): RPN CMD: cr 1 dlci 0 pf 0 ilen 3 fcs 0x70 mcc_len 1
dlci 18 br 112 db 0 sb 0 p 0 pt 0 xi 1 xo 0
rtri 0 rtro 0 rtci 1 rtco 0 xon 19 xoff 127 pm 0xaa3f
< ACL data: handle 11 flags 0x02 dlen 18
L2CAP(d): cid 0x004a len 14 [psm 3]
RFCOMM(s): RPN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 18 br 7 db 3 sb 0 p 0 pt 0 xi 0 xo 0
rtri 0 rtro 0 rtci 0 rtco 0 xon 17 xoff 19 pm 0x3f7f
> HCI Event: Number of Completed Packets (0x13) plen 5
< ACL data: handle 11 flags 0x02 dlen 15
L2CAP(d): cid 0x004a len 11 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 18 pf 0 ilen 7 fcs 0x14
OBEX: Connect rsp(f): status 200 len 7 version 1.0 flags 0 mtu 32767
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 11 flags 0x02 dlen 1016
L2CAP(d): cid 0x0041 len 1012 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 18 pf 0 ilen 1007 fcs 0xce
> ACL data: handle 11 flags 0x02 dlen 1016
L2CAP(d): cid 0x0041 len 1012 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 18 pf 0 ilen 1007 fcs 0xce
> ACL data: handle 11 flags 0x02 dlen 1016
L2CAP(d): cid 0x0041 len 1012 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 18 pf 0 ilen 1007 fcs 0xce
> ACL data: handle 11 flags 0x02 dlen 1016
L2CAP(d): cid 0x0041 len 1012 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 18 pf 0 ilen 1007 fcs 0xce
> ACL data: handle 11 flags 0x02 dlen 1016
L2CAP(d): cid 0x0041 len 1012 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 18 pf 0 ilen 1007 fcs 0xce
> ACL data: handle 11 flags 0x02 dlen 1016
L2CAP(d): cid 0x0041 len 1012 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 18 pf 0 ilen 1007 fcs 0xce
> ACL data: handle 11 flags 0x02 dlen 1016
L2CAP(d): cid 0x0041 len 1012 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 18 pf 0 ilen 1007 fcs 0xce
> ACL data: handle 11 flags 0x02 dlen 1016
L2CAP(d): cid 0x0041 len 1012 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 18 pf 0 ilen 1007 fcs 0xce
> ACL data: handle 11 flags 0x02 dlen 1016
L2CAP(d): cid 0x0041 len 1012 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 18 pf 0 ilen 1007 fcs 0xce
> ACL data: handle 11 flags 0x02 dlen 1016
L2CAP(d): cid 0x0041 len 1012 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 18 pf 0 ilen 1007 fcs 0xce
> ACL data: handle 11 flags 0x02 dlen 1016
L2CAP(d): cid 0x0041 len 1012 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 18 pf 0 ilen 1007 fcs 0xce
> ACL data: handle 11 flags 0x02 dlen 1016
L2CAP(d): cid 0x0041 len 1012 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 18 pf 0 ilen 1007 fcs 0xce
> ACL data: handle 11 flags 0x02 dlen 213
L2CAP(d): cid 0x0041 len 209 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 18 pf 0 ilen 204 fcs 0xce
OBEX: Put cmd(c): len 12288
Name (0x01) = Unicode length 40
Body (0x48) = Sequence length 12239
< ACL data: handle 11 flags 0x02 dlen 11
L2CAP(d): cid 0x004a len 7 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 18 pf 0 ilen 3 fcs 0x14
OBEX: Put rsp(f): status 404 len 3
> ACL data: handle 11 flags 0x02 dlen 12
L2CAP(d): cid 0x0041 len 8 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 18 pf 1 ilen 3 fcs 0xd2 credits 2
OBEX: Disconnect cmd(f): len 3
< ACL data: handle 11 flags 0x02 dlen 11
L2CAP(d): cid 0x004a len 7 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 18 pf 0 ilen 3 fcs 0x14
OBEX: Disconnect rsp(f): status 200 len 3
< ACL data: handle 11 flags 0x02 dlen 8
L2CAP(d): cid 0x004a len 4 [psm 3]
RFCOMM(s): DISC: cr 0 dlci 18 pf 1 ilen 0 fcs 0xb2
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 11 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): UA: cr 0 dlci 18 pf 1 ilen 0 fcs 0x98
< ACL data: handle 11 flags 0x02 dlen 8
L2CAP(d): cid 0x004a len 4 [psm 3]
RFCOMM(s): DISC: cr 0 dlci 0 pf 1 ilen 0 fcs 0x9c
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 11 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): UA: cr 0 dlci 0 pf 1 ilen 0 fcs 0xb6
< ACL data: handle 11 flags 0x02 dlen 8
L2CAP(d): cid 0x004a len 4 [psm 3]
RFCOMM(s): DISC: cr 0 dlci 0 pf 1 ilen 0 fcs 0x9c
< ACL data: handle 11 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x004a scid 0x0041
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 11 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): DM: cr 0 dlci 0 pf 1 ilen 0 fcs 0x57
> ACL data: handle 11 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x004a scid 0x0041
< HCI Command: Disconnect (0x01|0x0006) plen 3
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Disconn Complete (0x05) plen 4
