Package: grub-pc Version: 1.98+20100710-1 Severity: wishlist One of my Debian installations is booted over both USB and SATA, depending on which computer the disk Debian is stored on is plugged into. The new /dev/disk/... path names in device.map and grub-pc/install_devices are helpful since when the disk is plugged into a SATA port upgrades work fine. The new pathnames do not cover the use-case of a disk plugged into different transports. Probably the best way to cover this is to allow installation to the parent of a particular filesystem, identified by any path to a block device, such as /dev/disk/by-label or /dev/disk/by-uuid. Same goes for device.map even though I'm not entirely sure what it is used for.
-- Package-specific info:
*********************** BEGIN /proc/mounts
/dev/mapper/xxxxxxxx-root / ext3 rw,relatime,errors=remount-ro,acl,data=ordered
0 0
/dev/sda1 /boot ext2 rw,relatime,errors=continue 0 0
*********************** END /proc/mounts
*********************** BEGIN /boot/grub/device.map
(hd0) /dev/disk/by-id/ata-WDC_WDxxxxxxxx-xxxxxx_WD-xxxxxxxxxxxx
*********************** END /boot/grub/device.map
*********************** BEGIN /boot/grub/grub.cfg
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
insmod 915resolution
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
if loadfont /grub/unicode.pf2 ; then
set gfxmode=800x600
load_video
insmod gfxterm
fi
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
set locale_dir=($root)/grub/locale
set lang=en
insmod gettext
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
insmod png
if background_image /grub/moreblue-orbit-grub.png ; then
set color_normal=black/black
set color_highlight=magenta/black
else
set menu_color_normal=cyan/blue
set menu_color_highlight=white/blue
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Debian GNU/Linux, with Linux 2.6.34-1-amd64' --class debian --class
gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
echo 'Loading Linux 2.6.34-1-amd64 ...'
linux /vmlinuz-2.6.34-1-amd64 root=/dev/mapper/xxxxxxxx-root ro quiet
loglevel=0
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.34-1-amd64
}
menuentry 'Debian GNU/Linux, with Linux 2.6.34-1-amd64 (recovery mode)' --class
debian --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
echo 'Loading Linux 2.6.34-1-amd64 ...'
linux /vmlinuz-2.6.34-1-amd64 root=/dev/mapper/xxxxxxxx-root ro
single quiet loglevel=0
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.34-1-amd64
}
menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-amd64' --class debian --class
gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
echo 'Loading Linux 2.6.32-5-amd64 ...'
linux /vmlinuz-2.6.32-5-amd64 root=/dev/mapper/xxxxxxxx-root ro quiet
loglevel=0
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.32-5-amd64
}
menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-amd64 (recovery mode)' --class
debian --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
echo 'Loading Linux 2.6.32-5-amd64 ...'
linux /vmlinuz-2.6.32-5-amd64 root=/dev/mapper/xxxxxxxx-root ro
single quiet loglevel=0
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.32-5-amd64
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86 ###
menuentry "Memory test (memtest86)" {
linux16 /memtest86.bin
}
### END /etc/grub.d/20_memtest86 ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
linux16 /memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
linux16 /memtest86+.bin console=ttyS0,115200n8
}
menuentry "Memory test (memtest86+, experimental multiboot)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
multiboot /memtest86+_multiboot.bin
}
menuentry "Memory test (memtest86+, serial console 115200, experimental
multiboot)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
multiboot /memtest86+_multiboot.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/99_pabs ###
insmod jpeg
if background_image /grub/splash.jpg ; then
set color_normal=white/black
set color_highlight=black/white
else
set menu_color_normal=cyan/blue
set menu_color_highlight=white/blue
fi
### END /etc/grub.d/99_pabs ###
*********************** END /boot/grub/grub.cfg
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (700, 'testing'), (600, 'unstable'), (550, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.34-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages grub-pc depends on:
ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy
ii grub-common 1.98+20100710-1 GRand Unified Bootloader, version
ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib
ii libdevmapper1.02.1 2:1.02.48-2 The Linux Kernel Device Mapper use
ii ucf 3.0025 Update Configuration File: preserv
Versions of packages grub-pc suggests:
ii desktop-base 5.0.5 common files for the Debian Deskto
-- Configuration Files:
/etc/default/grub changed:
GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT=""
GRUB_CMDLINE_LINUX="quiet loglevel=0"
GRUB_GFXMODE=800x600
-- debconf information:
grub2/kfreebsd_cmdline:
grub2/device_map_regenerated:
grub-pc/linux_cmdline: fillme
* grub2/linux_cmdline: quiet loglevel=0
grub-pc/install_devices_failed: false
grub-pc/chainload_from_menu.lst: true
grub-pc/kopt_extracted: false
grub-pc/postrm_purge_boot_grub: false
grub-pc/disk_description:
grub2/kfreebsd_cmdline_default: quiet
* grub2/linux_cmdline_default:
grub-pc/install_devices_empty: false
* grub-pc/install_devices:
/dev/disk/by-id/ata-WDC_WD1600BEAS-00RRT0_WD-WXEX07588377
grub-pc/install_devices_failed_upgrade: true
grub-pc/partition_description:
grub-pc/install_devices_disks_changed:
grub-pc/mixed_legacy_and_grub2: true
--
bye,
pabs
http://wiki.debian.org/PaulWise
signature.asc
Description: This is a digitally signed message part
