Package: fglrx-driver Version: 1:10-5-1 Severity: important Catalyst Driver 10-6 has a new 2D acceleration which renders black boxes and other visual artifacts, especially in Firefox and Thunderbird.
The bug is explained in these bug reports: http://ati.cchtml.com/show_bug.cgi?id=1813 http://ati.cchtml.com/show_bug.cgi?id=1839 http://ati.cchtml.com/show_bug.cgi?id=1845 Please note that the info attached to my bugreport is based von 10-5 because I did a downgrade. -- Package-specific info: VGA-compatible devices on PCI bus: 01:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5700 Series] DRM and fglrx Informations from dmesg: [ 1.058247] Linux agpgart interface v0.103 [ 11.382305] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 11.469724] [fglrx] Maximum main memory to use for locked dma buffers: 3145 MBytes. [ 11.480563] [fglrx] vendor: 1002 device: 68b8 count: 1 [ 11.486081] [fglrx] ioport: bar 4, base 0xe000, size: 0x100 [ 11.496663] [fglrx] Kernel PAT support is enabled [ 11.501654] [fglrx] module loaded - fglrx 8.73.3 [May 4 2010] with 1 minors [ 17.165940] fglrx_pci 0000:01:00.0: irq 29 for MSI/MSI-X [ 17.166427] [fglrx] Firegl kernel thread PID: 2054 [ 17.166635] [fglrx] IRQ 29 Enabled [ 17.371108] [fglrx] Gart USWC size:1032 M. [ 17.371111] [fglrx] Gart cacheable size:407 M. [ 17.371115] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 17.371117] [fglrx] Reserved FB block: Unshared offset:f9c5000, size:33b000 [ 17.371119] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000 Xorg X server configuration file status: -rw-r--r-- 1 root root 775 May 22 20:26 /etc/X11/xorg.conf Contents of /etc/X11/xorg.conf: Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Files" EndSection Section "Module" EndSection Section "ServerFlags" Option "Xinerama" "off" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Xorg X server log files on system: -rw-r--r-- 1 root root 25200 Nov 25 2008 /var/log/Xorg.21.log -rw-r--r-- 1 root root 25199 Jan 4 2009 /var/log/Xorg.20.log -rw-r--r-- 1 root root 20777 Jan 9 18:57 /var/log/Xorg.2.log -rw-r--r-- 1 root root 23979 Jun 27 15:17 /var/log/Xorg.1.log -rw-r--r-- 1 root root 22587 Jul 2 15:24 /var/log/Xorg.0.log Contents of most recent Xorg X server log file /var/log/Xorg.0.log: X.Org X Server 1.7.7 Release Date: 2010-05-04 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.32.14-dsa-ia32 i686 Debian Current Operating System: Linux aiur 2.6.32-5-686 #1 SMP Tue Jun 1 04:59:47 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=2bc7791d-bbc8-44b6-a47b-9b01298a59f8 ro vga=786 Build Date: 03 June 2010 04:08:50PM xorg-server 2:1.7.7-2 (Julien Cristau <jcris...@debian.org>) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 2 15:24:53 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" (==) ServerLayout "aticonfig Layout" (**) |-->Screen "aticonfig-Screen[0]-0" (0) (**) | |-->Monitor "aticonfig-Monitor[0]-0" (**) | |-->Device "aticonfig-Device[0]-0" (**) Option "Xinerama" "off" (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to "/usr/lib/xorg/modules" (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. (II) Loader magic: 0x81eac60 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (++) using VT number 7 (--) PCI:*(0:1:0:0) 1002:68b8:1462:2140 ATI Technologies Inc Juniper [Radeon HD 5700 Series] rev 0, Mem @ 0xd0000000/268435456, 0xfeae0000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072 (II) Open ACPI successful (/var/run/acpid.socket) (II) "extmod" will be loaded by default. (II) "dbe" will be loaded by default. (II) "glx" will be loaded by default. (II) "record" will be loaded by default. (II) "dri" will be loaded by default. (II) "dri2" will be loaded by default. (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension SELinux (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor="FireGL - ATI Technologies Inc." compiled for 7.5.0, module version = 1.0.0 (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "fglrx" (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." compiled for 1.7.1, module version = 8.73.3 Module class: X.Org Video Driver (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." compiled for 1.7.1, module version = 8.73.3 (II) ATI Proprietary Linux Driver Version Identifier:8.73.3 (II) ATI Proprietary Linux Driver Release Identifier: 8.732 (II) ATI Proprietary Linux Driver Build Date: May 4 2010 21:16:04 (II) Primary Device is: PCI 0...@00:00:0 (WW) Falling back to old probe method for fglrx (II) Loading PCS database from /etc/ati/amdpcsdb (--) Chipset Supported AMD Graphics Processor (0x68B8) found (WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:17:0) found (WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:18:0) found (WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:18:1) found (WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:18:2) found (WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:19:0) found (WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:19:1) found (WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:19:2) found (WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:20:0) found (WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:20:1) found (WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:20:2) found (WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:20:3) found (WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:20:4) found (WW) fglrx: No matching Device section for instance (BusID PCI:0...@0:20:5) found (WW) fglrx: No matching Device section for instance (BusID PCI:0...@1:0:1) found (II) AMD Video driver is running on a device belonging to a group targeted for this release (II) AMD Video driver is signed (II) fglrx(0): pEnt->device->identifier=0x834bf98 (II) fglrx(0): === [atiddxPreInit] === begin (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules/libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.7.7, module version = 0.1.0 ABI class: X.Org Video Driver, version 6.0 (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) (==) fglrx(0): Default visual is TrueColor (**) fglrx(0): Option "DPMS" "true" (==) fglrx(0): RGB weight 888 (II) fglrx(0): Using 8 bits per RGB (==) fglrx(0): Buffer Tiling is ON (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:1:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 11, (OK) ukiOpenByBusid: ukiOpenMinor returns 11 ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 (==) fglrx(0): NoAccel = NO (--) fglrx(0): Chipset: "ATI Radeon HD 5700 Series" (Chipset = 0x68b8) (--) fglrx(0): (PciSubVendor = 0x1462, PciSubDevice = 0x2140) (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000 (--) fglrx(0): MMIO registers at 0xfeae0000 (--) fglrx(0): I/O port at 0x0000e000 (==) fglrx(0): ROM-BIOS at 0x000c0000 (II) fglrx(0): AC Adapter is used (II) fglrx(0): Primary V_BIOS segment is: 0xc000 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules/libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.1.0 ABI class: X.Org Video Driver, version 6.0 (II) fglrx(0): VESA BIOS detected (II) fglrx(0): VESA VBE Version 3.0 (II) fglrx(0): VESA VBE Total Mem: 16384 kB (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS (II) fglrx(0): VESA VBE OEM Software Rev: 12.15 (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. (II) fglrx(0): VESA VBE OEM Product: JUNIPER (II) fglrx(0): VESA VBE OEM Product Rev: 01.00 (II) fglrx(0): ATI Video BIOS revision 9 or later detected (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5 (II) fglrx(0): PCIE card detected (--) fglrx(0): Using per-process page tables (PPPT) as GART. (WW) fglrx(0): board is an unknown third party board, chipset is supported (II) fglrx(0): Using adapter: 1:0.0. (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000) (II) fglrx(0): Interrupt handler installed at IRQ 29. (II) fglrx(0): RandR 1.2 support is enabled! (II) fglrx(0): RandR 1.2 rotation support is enabled! (==) fglrx(0): Center Mode is disabled (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) fglrx(0): Finished Initialize PPLIB! (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) fglrx(0): Connected Display0: DFP 3 [dfp3] (II) fglrx(0): Display0 EDID data --------------------------- (II) fglrx(0): Manufacturer: SAM Model: 1bb Serial#: 1212231993 (II) fglrx(0): Year: 2006 Week: 6 (II) fglrx(0): EDID Version: 1.3 (II) fglrx(0): Digital Display Input (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30 (II) fglrx(0): Gamma: 2.20 (II) fglrx(0): DPMS capabilities: Off (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 (II) fglrx(0): First detailed timing is preferred mode (II) fglrx(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600 (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329 (II) fglrx(0): Supported established timings: (II) fglrx(0): 720x...@70hz (II) fglrx(0): 640x...@60hz (II) fglrx(0): 640x...@67hz (II) fglrx(0): 640x...@72hz (II) fglrx(0): 640x...@75hz (II) fglrx(0): 800x...@56hz (II) fglrx(0): 800x...@60hz (II) fglrx(0): 800x...@72hz (II) fglrx(0): 800x...@75hz (II) fglrx(0): 832x...@75hz (II) fglrx(0): 1024x...@60hz (II) fglrx(0): 1024x...@70hz (II) fglrx(0): 1024x...@75hz (II) fglrx(0): 1280x1...@75hz (II) fglrx(0): 1152x...@75hz (II) fglrx(0): Manufacturer's mask: 0 (II) fglrx(0): Supported standard timings: (II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513 (II) fglrx(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) fglrx(0): Supported detailed timing: (II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz (II) fglrx(0): Monitor name: SyncMaster (II) fglrx(0): Serial No: HMEL202615 (II) fglrx(0): EDID (in hex): (II) fglrx(0): 00ffffffffffff004c2dbb0139314148 (II) fglrx(0): 0610010380261e782ade95a3544c9926 (II) fglrx(0): 0f5054bfef8081808140714f01010101 (II) fglrx(0): 010101010101302a009851002a403070 (II) fglrx(0): 1300782d1100001e000000fd00384b1e (II) fglrx(0): 510e000a202020202020000000fc0053 (II) fglrx(0): 796e634d61737465720a2020000000ff (II) fglrx(0): 00484d454c3230323631350a20200093 (II) fglrx(0): End of Display0 EDID data -------------------- (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0 (II) fglrx(0): Output DFP2 has no monitor section (II) fglrx(0): Output DFP3 has no monitor section (II) fglrx(0): Output CRT2 has no monitor section (II) fglrx(0): Output DFP1 disconnected (II) fglrx(0): Output DFP2 disconnected (II) fglrx(0): Output DFP3 connected (II) fglrx(0): Output CRT2 disconnected (II) fglrx(0): Using exact sizes for initial modes (II) fglrx(0): Output DFP3 using initial mode 1280x1024 (II) fglrx(0): DPI set to (96, 96) (II) fglrx(0): Adapter ATI Radeon HD 5700 Series has 2 configurable heads and 1 displays connected. (==) fglrx(0): QBS disabled (==) fglrx(0): PseudoColor visuals disabled (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (==) fglrx(0): NoDRI = NO (==) fglrx(0): Capabilities: 0x00000000 (==) fglrx(0): CapabilitiesEx: 0x00000000 (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" (==) fglrx(0): UseFastTLS=0 (==) fglrx(0): BlockSignalsOnLock=1 (--) Depth 24 pixmap format is 32 bpp (II) Loading extension ATIFGLRXDRI (II) fglrx(0): doing swlDriScreenInit (II) fglrx(0): swlDriScreenInit for fglrx driver ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:1:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 17, (OK) ukiOpenByBusid: ukiOpenMinor returns 17 ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 (II) fglrx(0): [uki] DRM interface version 1.0 (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0" (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000 (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb7405000 (II) fglrx(0): [uki] framebuffer handle = 0x3000 (II) fglrx(0): [uki] added 1 reserved context for kernel (II) fglrx(0): swlDriScreenInit done (II) fglrx(0): Kernel Module Version Information: (II) fglrx(0): Name: fglrx (II) fglrx(0): Version: 8.73.3 (II) fglrx(0): Date: May 4 2010 (II) fglrx(0): Desc: ATI FireGL DRM kernel module (II) fglrx(0): Kernel Module version matches driver. (II) fglrx(0): Kernel Module Build Time Information: (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.32-5-686 (II) fglrx(0): Build-Kernel MODVERSIONS: no (II) fglrx(0): Build-Kernel __SMP__: no (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 (II) fglrx(0): [uki] register handle = 0x00004000 (II) fglrx(0): DRI initialization successfull! (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01040000 (II) fglrx(0): FBMM initialized for area (0,0)-(1280,3328) (II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1280) (front color buffer - assumption) (II) fglrx(0): Largest offscreen area available: 1280 x 2048 (==) fglrx(0): Backing store disabled (II) Loading extension FGLRXEXTENSION (**) fglrx(0): DPMS enabled (II) fglrx(0): Initialized in-driver Xinerama extension (**) fglrx(0): Textured Video is enabled. (II) LoadModule: "glesx" (II) Loading /usr/lib/xorg/modules/glesx.so (II) Module glesx: vendor="X.Org Foundation" compiled for 1.7.1, module version = 1.0.0 (II) Loading extension GLESX (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/lib/xorg/modules/libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.2.1 ABI class: X.Org Video Driver, version 6.0 (II) fglrx(0): GLESX enableFlags = 94 (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles Solid Horizontal and Vertical Lines Driver provided ScreenToScreenBitBlt replacement Driver provided FillSolidRects replacement (II) fglrx(0): GLESX is enabled (II) LoadModule: "amdxmm" (II) Loading /usr/lib/xorg/modules/amdxmm.so (II) Module amdxmm: vendor="X.Org Foundation" compiled for 1.7.1, module version = 1.0.0 (II) Loading extension AMDXVOPL (II) fglrx(0): UVD2 feature is available (II) fglrx(0): Enable composite support successfully (WW) fglrx(0): Option "VendorName" is not used (WW) fglrx(0): Option "ModelName" is not used (II) fglrx(0): X context handle = 0x1 (II) fglrx(0): [DRI] installation complete (==) fglrx(0): Silken mouse enabled (==) fglrx(0): Using HW cursor of display infrastructure! (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2. (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE SELinux: Disabled on system, not enabling in X server ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:1:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 18, (OK) ukiOpenByBusid: ukiOpenMinor returns 18 ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 (II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (II) fglrx(0): Enable the clock gating! (II) fglrx(0): Setting screen physical size to 338 x 270 (II) config/udev: Adding input device Power Button (/dev/input/event4) (**) Power Button: Applying InputClass "evdev keyboard catchall" (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.7.6.901, module version = 2.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event4" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "de" (**) Option "xkb_variant" "nodeadkeys" (**) Option "xkb_options" "nodeadkeys" (II) config/udev: Adding input device Power Button (/dev/input/event3) (**) Power Button: Applying InputClass "evdev keyboard catchall" (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event3" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "de" (**) Option "xkb_variant" "nodeadkeys" (**) Option "xkb_options" "nodeadkeys" (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event0) (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall" (**) Logitech USB-PS/2 Optical Mouse: always reports core events (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event0" (II) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons (II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s) (II) Logitech USB-PS/2 Optical Mouse: Found relative axes (II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5 (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE) (II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes. (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device Logitech HID compliant keyboard (/dev/input/event1) (**) Logitech HID compliant keyboard: Applying InputClass "evdev keyboard catchall" (**) Logitech HID compliant keyboard: always reports core events (**) Logitech HID compliant keyboard: Device: "/dev/input/event1" (II) Logitech HID compliant keyboard: Found keys (II) Logitech HID compliant keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "Logitech HID compliant keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "de" (**) Option "xkb_variant" "nodeadkeys" (**) Option "xkb_options" "nodeadkeys" (II) config/udev: Adding input device Logitech HID compliant keyboard (/dev/input/event2) (**) Logitech HID compliant keyboard: Applying InputClass "evdev keyboard catchall" (**) Logitech HID compliant keyboard: always reports core events (**) Logitech HID compliant keyboard: Device: "/dev/input/event2" (II) Logitech HID compliant keyboard: Found 20 mouse buttons (II) Logitech HID compliant keyboard: Found keys (II) Logitech HID compliant keyboard: Configuring as mouse (II) Logitech HID compliant keyboard: Configuring as keyboard (**) Logitech HID compliant keyboard: YAxisMapping: buttons 4 and 5 (**) Logitech HID compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech HID compliant keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "de" (**) Option "xkb_variant" "nodeadkeys" (**) Option "xkb_options" "nodeadkeys" (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event6) (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall" (**) ACPI Virtual Keyboard Device: always reports core events (**) ACPI Virtual Keyboard Device: Device: "/dev/input/event6" (II) ACPI Virtual Keyboard Device: Found keys (II) ACPI Virtual Keyboard Device: Configuring as keyboard (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "de" (**) Option "xkb_variant" "nodeadkeys" (**) Option "xkb_options" "nodeadkeys" (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (900, 'testing'), (800, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/4 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages fglrx-driver depends on: ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy ii fglrx-glx 1:10-5-1 proprietary libGL for the non-free ii laptop-detect 0.13.7 attempt to detect a laptop ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib ii libgcc1 1:4.4.4-5 GCC support library ii libgl1-mesa-glx [libgl1] 7.7.1-3 A free implementation of the OpenG ii libx11-6 2:1.3.3-3 X11 client-side library ii libxext6 2:1.1.1-3 X11 miscellaneous extension librar ii libxinerama1 2:1.1-3 X11 Xinerama extension library ii libxrandr2 2:1.3.0-3 X11 RandR extension library ii libxrender1 1:0.9.5-2 X Rendering Extension client libra ii xserver-xorg 1:7.5+6 the X.Org X server Versions of packages fglrx-driver recommends: ii fglrx-atieventsd 1:10-5-1 external events daemon for the non ii fglrx-glx 1:10-5-1 proprietary libGL for the non-free ii fglrx-source 1:10-5-1 kernel module source for the non-f Versions of packages fglrx-driver suggests: ii fglrx-control 1:10-5-1 control panel for the non-free AMD -- debconf information: * fglrx-driver/acpi_switch: false -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
