Package: linux-2.6 Version: 2.6.34-1~experimental.2 Severity: normal Tags: patch
Hi there is a problem with qcserial since ... 2.6.32 I think - there is currently a regression bug. Seems like there was a change in the fifo the new method doesn't handle frmware uploads well.... There is a patch for qcserial and options modules to use a shared wwan module http://thread.gmane.org/gmane.linux.usb.general/29707 here is a link for the patchs is it possible to add it to the 2.6.34 build Alex -- Package-specific info: ** Version: Linux version 2.6.34-1-amd64 (Debian 2.6.34-1~experimental.2) (b...@decadent.org.uk) (gcc version 4.4.4 (Debian 4.4.4-4) ) #1 SMP Sun Jun 6 22:29:25 UTC 2010 ** Command line: BOOT_IMAGE=/vmlinuz-2.6.34-1-amd64 root=UUID=f0b97f9e-1483-4764-bd56-d321a42de30b ro quiet ** Tainted: P (1) * Proprietary module has been loaded. ** Kernel log: ** Model information sys_vendor: Gigabyte Technology Co., Ltd. product_name: GA-MA790FXT-UD5P product_version: chassis_vendor: Gigabyte Technology Co., Ltd. chassis_version: bios_vendor: Award Software International, Inc. bios_version: F8d board_vendor: Gigabyte Technology Co., Ltd. board_name: GA-MA790FXT-UD5P board_version: ** Loaded modules: Module Size Used by usb_storage 39287 0 dm_snapshot 24818 3 nvidia 10646620 38 sha256_generic 9397 4 aes_x86_64 7380 4 aes_generic 26090 1 aes_x86_64 cbc 2595 2 ppdev 5507 0 lp 8190 0 parport 25598 2 ppdev,lp vboxnetadp 4241 0 vboxnetflt 12150 0 vboxdrv 1721742 6 vboxnetadp,vboxnetflt powernow_k8 11056 0 cpufreq_powersave 926 0 cpufreq_conservative 7886 0 cpufreq_stats 2649 0 cpufreq_userspace 2016 0 binfmt_misc 6558 1 nfsd 253519 21 exportfs 3178 1 nfsd nfs 240208 0 lockd 58476 2 nfsd,nfs fscache 29486 1 nfs nfs_acl 2039 2 nfsd,nfs auth_rpcgss 33596 2 nfsd,nfs sunrpc 161819 16 nfsd,nfs,lockd,nfs_acl,auth_rpcgss bridge 53994 0 stp 1464 1 bridge ip6table_mangle 1508 1 ip6t_frag 1222 3 ip6t_LOG 4450 3 ip6t_REJECT 2593 3 nf_conntrack_ipv6 10579 55 ip6table_filter 1332 1 ip6_tables 15403 4 ip6table_mangle,ip6t_frag,ip6t_LOG,ip6table_filter iptable_mangle 1456 1 iptable_nat 3683 1 nf_nat 13757 1 iptable_nat xt_pkttype 1011 4 ipt_ULOG 7097 4 ipt_REJECT 1977 4 xt_limit 1790 27 xt_tcpudp 2327 142 nf_conntrack_ipv4 9745 76 iptable_nat,nf_nat nf_defrag_ipv4 1211 1 nf_conntrack_ipv4 xt_state 1311 128 nf_conntrack 47409 5 nf_conntrack_ipv6,iptable_nat,nf_nat,nf_conntrack_ipv4,xt_state iptable_filter 1376 1 ip_tables 14274 3 iptable_mangle,iptable_nat,iptable_filter x_tables 13519 16 ip6table_mangle,ip6t_frag,ip6t_LOG,ip6t_REJECT,ip6table_filter,ip6_tables,iptable_mangle,iptable_nat,xt_pkttype,ipt_ULOG,ipt_REJECT,xt_limit,xt_tcpudp,xt_state,iptable_filter,ip_tables ext4 275079 19 jbd2 62413 1 ext4 crc16 1311 1 ext4 ext2 53699 2 tun 12166 2 firewire_sbp2 11407 0 loop 12330 0 dm_crypt 10543 2 joydev 8920 0 hid_logitech 7579 0 ff_memless 3892 1 hid_logitech uvcvideo 50068 1 videodev 31390 2 uvcvideo v4l1_compat 11590 2 uvcvideo,videodev v4l2_compat_ioctl32 9320 1 videodev snd_usb_audio 67950 0 edac_core 29301 0 edac_mce_amd 6497 0 snd_hda_codec_realtek 250812 1 evdev 7426 14 snd_hda_intel 19530 0 snd_usb_lib 14819 1 snd_usb_audio snd_hda_codec 64924 2 snd_hda_codec_realtek,snd_hda_intel snd_seq_midi 4454 0 snd_seq_midi_event 4738 1 snd_seq_midi snd_hwdep 5468 2 snd_usb_audio,snd_hda_codec snd_rawmidi 15945 2 snd_usb_lib,snd_seq_midi snd_pcm 61665 3 snd_usb_audio,snd_hda_intel,snd_hda_codec snd_seq 42806 2 snd_seq_midi,snd_seq_midi_event snd_timer 16304 2 snd_pcm,snd_seq snd_seq_device 4515 3 snd_seq_midi,snd_rawmidi,snd_seq k10temp 2707 0 snd 46979 11 snd_usb_audio,snd_hda_codec_realtek,snd_hda_intel,snd_usb_lib,snd_hda_codec,snd_hwdep,snd_rawmidi,snd_pcm,snd_seq,snd_timer,snd_seq_device snd_page_alloc 6289 2 snd_hda_intel,snd_pcm pcspkr 1723 0 soundcore 4838 1 snd usbhid 33354 2 hid_logitech hid 63831 2 hid_logitech,usbhid i2c_piix4 8336 0 i2c_core 16076 3 nvidia,videodev,i2c_piix4 serio_raw 3726 0 tpm_tis 7349 0 tpm 9843 1 tpm_tis tpm_bios 4629 1 tpm wmi 5443 0 processor 29010 1 powernow_k8 button 4706 0 ext3 106594 13 jbd 37179 1 ext3 mbcache 5152 3 ext4,ext2,ext3 dm_mod 55429 111 dm_snapshot,dm_crypt raid1 18535 2 md_mod 77204 3 raid1 fuse 50697 11 sg 19141 0 sr_mod 12711 0 cdrom 29769 1 sr_mod sd_mod 30469 10 crc_t10dif 1284 1 sd_mod ata_generic 2895 0 firewire_ohci 18688 0 ohci_hcd 18693 0 pata_jmicron 2304 0 e1000 85029 0 firewire_core 38607 2 firewire_sbp2,firewire_ohci pata_atiixp 3617 0 crc_itu_t 1315 1 firewire_core ahci 34034 2 thermal 12046 0 ehci_hcd 30813 0 thermal_sys 12036 2 processor,thermal aacraid 61660 6 usbcore 125665 9 usb_storage,uvcvideo,snd_usb_audio,snd_usb_lib,usbhid,ohci_hcd,ehci_hcd nls_base 6369 1 usbcore libata 133830 4 ata_generic,pata_jmicron,pata_atiixp,ahci scsi_mod 125191 7 usb_storage,firewire_sbp2,sg,sr_mod,sd_mod,aacraid,libata r8169 29451 0 mii 3250 1 r8169 ** PCI devices: 00:00.0 Host bridge [0600]: ATI Technologies Inc RD790 Northbridge only dual slot PCI-e_GFX and HT3 K8 part [1002:5956] Subsystem: ATI Technologies Inc RD790 Northbridge only dual slot PCI-e_GFX and HT3 K8 part [1002:5956] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 32 Region 3: Memory at <ignored> (64-bit, non-prefetchable) Capabilities: <access denied> 00:02.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A) [1002:5978] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: f8000000-fbffffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:07.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port D) [1002:597d] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fda00000-fdafffff Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:09.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port E) [1002:597e] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:0a.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port F) [1002:597f] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdd00000-fddfffff Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:0b.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx1 port A) [1002:5980] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fd200000-fd5fffff Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0]) Subsystem: Giga-byte Technology Device [1458:b002] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at ff00 [size=8] Region 1: I/O ports at fe00 [size=4] Region 2: I/O ports at fd00 [size=8] Region 3: I/O ports at fc00 [size=4] Region 4: I/O ports at fb00 [size=16] Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3c) Subsystem: Giga-byte Technology Device [1458:4385] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c] (prog-if 8a [Master SecP PriP]) Subsystem: Giga-byte Technology Device [1458:5002] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at fa00 [size=16] Capabilities: <access denied> Kernel driver in use: pata_atiixp 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] Subsystem: Giga-byte Technology Device [1458:a102] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin ? routed to IRQ 16 Region 0: Memory at fe024000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d] Subsystem: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=06, subordinate=06, sec-latency=64 I/O behind bridge: 00009000-00009fff Memory behind bridge: fd900000-fd9fffff Prefetchable memory behind bridge: fd800000-fd8fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe028000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration [1022:1200] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map [1022:1201] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller [1022:1202] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control [1022:1203] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k10temp 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control [1022:1204] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 01:00.0 VGA compatible controller [0300]: nVidia Corporation G92 [GeForce 9800 GT] [10de:0614] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Giga-byte Technology Device [1458:34d0] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at af00 [size=128] [virtual] Expansion ROM at fb000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:e000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 29 Region 0: I/O ports at ee00 [size=256] Region 2: Memory at fd7ff000 (64-bit, prefetchable) [size=4K] Region 4: Memory at fd7e0000 (64-bit, prefetchable) [size=64K] [virtual] Expansion ROM at fd700000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: r8169 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:e000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 30 Region 0: I/O ports at de00 [size=256] Region 2: Memory at fdeff000 (64-bit, prefetchable) [size=4K] Region 4: Memory at fdee0000 (64-bit, prefetchable) [size=64K] [virtual] Expansion ROM at fde00000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: r8169 04:00.0 SATA controller [0106]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 5: Memory at fddfe000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: ahci 04:00.1 IDE interface [0101]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 02) (prog-if 85 [Master SecO PriO]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at cf00 [size=8] Region 1: I/O ports at ce00 [size=4] Region 2: I/O ports at cd00 [size=8] Region 3: I/O ports at cc00 [size=4] Region 4: I/O ports at cb00 [size=16] Capabilities: <access denied> Kernel driver in use: pata_jmicron 05:00.0 RAID bus controller [0104]: Adaptec AAC-RAID [9005:0285] (rev 09) Subsystem: Adaptec 51645 [9005:02cf] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 31 Region 0: Memory at fd200000 (64-bit, non-prefetchable) [size=2M] [virtual] Expansion ROM at fdb00000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: aacraid 06:06.0 Ethernet controller [0200]: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) [8086:1010] (rev 01) Subsystem: Compaq Computer Corporation NC7170 Gigabit Server Adapter [0e11:00db] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (63750ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at fd9c0000 (64-bit, non-prefetchable) [size=128K] Region 2: Memory at fd940000 (64-bit, non-prefetchable) [size=256K] Region 4: I/O ports at 9f00 [size=64] [virtual] Expansion ROM at fd800000 [disabled] [size=256K] Capabilities: <access denied> Kernel driver in use: e1000 06:06.1 Ethernet controller [0200]: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) [8086:1010] (rev 01) Subsystem: Compaq Computer Corporation NC7170 Gigabit Server Adapter [0e11:00db] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (63750ns min), Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 21 Region 0: Memory at fd9a0000 (64-bit, non-prefetchable) [size=128K] Region 4: I/O ports at 9e00 [size=64] Capabilities: <access denied> Kernel driver in use: e1000 06:0e.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:1000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at fd9ff000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at fd9f8000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: firewire_ohci ** USB devices: Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 051d:0002 American Power Conversion Uninterruptible Power Supply Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 003: ID 046d:0990 Logitech, Inc. QuickCam Pro 9000 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 091e:2271 Garmin International Edge 605/705 Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing'), (500, 'stable'), (100, 'unstable'), (50, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.34-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_AU.UTF8, LC_CTYPE=en_AU.UTF8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.34-1-amd64 depends on: ii debconf [debconf 1.5.32 Debian configuration management sy ii initramfs-tools 0.94.4 tools for generating an initramfs ii linux-base 2.6.34-1~experimental.2 Linux image base package ii module-init-tool 3.12~pre2-3 tools for managing Linux kernel mo Versions of packages linux-image-2.6.34-1-amd64 recommends: ii firmware-linux-f 2.6.34-1~experimental.2 Binary firmware for various driver Versions of packages linux-image-2.6.34-1-amd64 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.34 <none> (no description available) Versions of packages linux-image-2.6.34-1-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: * linux-image-2.6.34-1-amd64/postinst/missing-firmware-2.6.34-1-amd64: linux-image-2.6.34-1-amd64/postinst/bootloader-error-2.6.34-1-amd64: shared/kernel-image/really-run-bootloader: true linux-image-2.6.34-1-amd64/prerm/would-invalidate-boot-loader-2.6.34-1-amd64: true linux-image-2.6.34-1-amd64/postinst/depmod-error-initrd-2.6.34-1-amd64: false linux-image-2.6.34-1-amd64/postinst/bootloader-test-error-2.6.34-1-amd64: linux-image-2.6.34-1-amd64/prerm/removing-running-kernel-2.6.34-1-amd64: true -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
