Package: linux-2.6 Version: 2.6.32-15 Severity: normal
Starting a VE on openvz, with "vzctl start" on ext4 does a kernel oops. -- Package-specific info: ** Version: Linux version 2.6.32-5-openvz-686 (Debian 2.6.32-15) (b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 06:52:26 UTC 2010 ** Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-openvz-686 root=/dev/mapper/rootvg-root_lv ro rootdelay=10 quiet ** Tainted: D (128) * Kernel has oopsed before. ** Kernel log: [ 42.176694] IRQ 15/ipmi_si: IRQF_DISABLED is not guaranteed on shared IRQs [ 42.176708] Using irq 15 [ 42.228769] IPMI BT: req2rsp=10 secs retries=3 [ 42.234466] ipmi: Found new BMC (man_id: 0x0002a2, prod_id: 0x0002, dev_id: 0x00) [ 42.234496] IPMI bt interface initialized [ 42.337613] ipmi device interface [ 42.635055] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 48.996009] ib0: no IPv6 routers present [ 52.276011] eth0: no IPv6 routers present [ 52.824009] venet0: no IPv6 routers present [ 94.755455] ib0: enabling connected mode will cause multicast packet drops [ 94.755510] ib1: enabling connected mode will cause multicast packet drops [ 94.756944] ib0: mtu > 2044 will cause multicast packet drops. [ 94.758961] ib1: mtu > 2044 will cause multicast packet drops. [ 290.679212] warning: `vzctl' uses 32-bit capabilities (legacy support in use) [ 290.741517] CT: 100: started [ 290.777927] BUG: unable to handle kernel NULL pointer dereference at (null) [ 290.778102] IP: [<(null)>] (null) [ 290.778208] *pdpt = 000000003654c001 *pde = 0000000000000000 [ 290.778360] Oops: 0000 [#1] SMP [ 290.778504] last sysfs file: /sys/devices/pci0000:15/0000:15:01.0/0000:16:00.0/net/ib1/mode [ 290.778592] Modules linked in: vzethdev vznetdev simfs vzrst vzcpt vzdquota vzmon vzdev ip6t_REJECT ip6table_mangle ip6table_filter ip6_tables xt_tcpudp xt_length xt_hl xt_tcpmss xt_TCPMSS iptable_mangle iptable_filter ipmi_devintf xt_multiport xt_limit ipmi_si xt_dscp ipt_REJECT ipmi_msghandler ip_tables x_tables cpufreq_conservative cpufreq_userspace cpufreq_stats cpufreq_powersave nfsd exportfs nfs lockd fscache nfs_acl auth_rpcgss ext4 jbd2 crc16 p4_clockmod speedstep_lib dell_rbu xprtrdma svcrdma sunrpc ib_srp scsi_transport_srp scsi_tgt ib_ipoib ib_umad rdma_ucm rdma_cm ib_cm iw_cm ib_sa ib_addr ib_uverbs loop snd_pcsp ib_mthca snd_pcm ib_mad snd_timer tpm_tis tpm snd i2c_piix4 ib_core tpm_bios i2c_core soundcore dcdbas evdev shpchp pci_hotplug snd_page_alloc button processor ext3 jbd mbcache dm_mod sr_mod cdrom ata_generic sg sd_mod crc_t10dif pata_serverworks libata ohci_hcd aic7xxx megaraid_mbox qla1280 megaraid_mm tg3 ehci_hcd libphy scsi_transport_spi floppy usbcore nls_base thermal scsi_mod thermal_sys [last unloaded: scsi_wait_scan] [ 290.781812] [ 290.781812] Pid: 2260, comm: vzctl Not tainted (2.6.32-5-openvz-686 #1) belyayev PowerEdge 6600 ) [ 290.781812] EIP: 0060:[<00000000>] EFLAGS: 00010246 CPU: 2 [ 290.781812] EIP is at 0x0 [ 290.781812] EAX: ef6147f0 EBX: f88b8fd4 ECX: 00000000 EDX: 00003000 [ 290.781812] ESI: ef6147f0 EDI: 00000003 EBP: 00000000 ESP: f64e3cd8 [ 290.781812] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 290.781812] Process vzctl (pid: 2260, veid: 100, ti=f64e2000 task=f65756a0 task.ti=f64e2000) [ 290.781812] Stack: [ 290.781812] fed7ff6a 00000000 00000000 ffff0000 ffffffff 00003000 00000000 00000002 [ 290.781812] <0> f69d7000 ef6149b8 ef614768 00000000 00000000 f64e3d48 cad73684 00000000 [ 290.781812] <0> c10db809 f6ec8240 00000001 f6e740c0 00000000 ef6147f0 00001000 00000000 [ 290.781812] Call Trace: [ 290.781812] [<fed7ff6a>] ? ext4_da_get_block_prep+0x15c/0x281 [ext4] [ 290.781812] [<c10db809>] ? __block_prepare_write+0x140/0x297 [ 290.781812] [<c10dbab3>] ? block_write_begin+0x70/0xc6 [ 290.781812] [<fed7fe0e>] ? ext4_da_get_block_prep+0x0/0x281 [ext4] [ 290.781812] [<fed82ab6>] ? ext4_da_write_begin+0x1f3/0x277 [ext4] [ 290.781812] [<fed7fe0e>] ? ext4_da_get_block_prep+0x0/0x281 [ext4] [ 290.781812] [<c10918ae>] ? generic_file_buffered_write+0xd0/0x21d [ 290.781812] [<c1091df8>] ? __generic_file_aio_write+0x265/0x28d [ 290.781812] [<f88b36b5>] ? vzquota_qlnk_destroy+0xe/0xa4 [vzdquota] [ 290.781812] [<f88b3f6d>] ? vzquota_inode_data+0xe3/0xfc [vzdquota] [ 290.781812] [<c1091e71>] ? generic_file_aio_write+0x51/0x93 [ 290.781812] [<c10bedc6>] ? do_sync_write+0xc0/0x107 [ 290.781812] [<c104c376>] ? autoremove_wake_function+0x0/0x2d [ 290.781812] [<c10bd579>] ? fd_install+0x1e/0x3c [ 290.781812] [<c10bed06>] ? do_sync_write+0x0/0x107 [ 290.781812] [<c10bf767>] ? vfs_write+0x7e/0xd6 [ 290.781812] [<c10bf8a1>] ? sys_write+0x40/0xa9 [ 290.781812] [<c1008120>] ? syscall_call+0x7/0xb [ 290.781812] Code: Bad EIP value. [ 290.781812] EIP: [<00000000>] 0x0 SS:ESP 0068:f64e3cd8 [ 290.781812] CR2: 0000000000000000 [ 290.787373] ---[ end trace 64f0f49746fe4c61 ]--- [ 291.064729] CT: 100: stopped [ 291.806231] BUG: unable to handle kernel NULL pointer dereference at (null) [ 291.806392] IP: [<(null)>] (null) [ 291.806498] *pdpt = 000000003679f001 *pde = 0000000000000000 [ 291.806651] Oops: 0000 [#2] SMP [ 291.806796] last sysfs file: /sys/devices/pci0000:15/0000:15:01.0/0000:16:00.0/net/ib1/mode [ 291.806885] Modules linked in: vzethdev vznetdev simfs vzrst vzcpt vzdquota vzmon vzdev ip6t_REJECT ip6table_mangle ip6table_filter ip6_tables xt_tcpudp xt_length xt_hl xt_tcpmss xt_TCPMSS iptable_mangle iptable_filter ipmi_devintf xt_multiport xt_limit ipmi_si xt_dscp ipt_REJECT ipmi_msghandler ip_tables x_tables cpufreq_conservative cpufreq_userspace cpufreq_stats cpufreq_powersave nfsd exportfs nfs lockd fscache nfs_acl auth_rpcgss ext4 jbd2 crc16 p4_clockmod speedstep_lib dell_rbu xprtrdma svcrdma sunrpc ib_srp scsi_transport_srp scsi_tgt ib_ipoib ib_umad rdma_ucm rdma_cm ib_cm iw_cm ib_sa ib_addr ib_uverbs loop snd_pcsp ib_mthca snd_pcm ib_mad snd_timer tpm_tis tpm snd i2c_piix4 ib_core tpm_bios i2c_core soundcore dcdbas evdev shpchp pci_hotplug snd_page_alloc button processor ext3 jbd mbcache dm_mod sr_mod cdrom ata_generic sg sd_mod crc_t10dif pata_serverworks libata ohci_hcd aic7xxx megaraid_mbox qla1280 megaraid_mm tg3 ehci_hcd libphy scsi_transport_spi floppy usbcore nls_base thermal scsi_mod thermal_sys [last unloaded: scsi_wait_scan] [ 291.810049] [ 291.810049] Pid: 2256, comm: vzctl Tainted: G D (2.6.32-5-openvz-686 #1) belyayev PowerEdge 6600 ) [ 291.810049] EIP: 0060:[<00000000>] EFLAGS: 00010246 CPU: 0 [ 291.810049] EIP is at 0x0 [ 291.810049] EAX: ef4c4088 EBX: f88b8fd4 ECX: 00000000 EDX: 00003000 [ 291.810049] ESI: ef4c4088 EDI: 00000000 EBP: ef4c4000 ESP: f0527e58 [ 291.810049] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 291.810049] Process vzctl (pid: 2256, veid: 0, ti=f0526000 task=f6a22b50 task.ti=f0526000) [ 291.810049] Stack: [ 291.810049] fed7eb5a ef4c4088 00000001 fed7ecad ef4c4250 00000000 cad97abc f69d7000 [ 291.810049] <0> 00000003 00000000 fed7eb6f ef4c4138 00000000 00000000 c1097c02 cad97abc [ 291.810049] <0> c109807f cad97abc 00000000 c1098151 f6ee4000 00000000 00000000 00000000 [ 291.810049] Call Trace: [ 291.810049] [<fed7eb5a>] ? vfs_dq_release_reservation_block+0x44/0x59 [ext4] [ 291.810049] [<fed7ecad>] ? ext4_da_invalidatepage+0x13e/0x152 [ext4] [ 291.810049] [<fed7eb6f>] ? ext4_da_invalidatepage+0x0/0x152 [ext4] [ 291.810049] [<c1097c02>] ? do_invalidatepage+0x16/0x18 [ 291.810049] [<c109807f>] ? truncate_inode_page+0x47/0x80 [ 291.810049] [<c1098151>] ? truncate_inode_pages_range+0x99/0x23f [ 291.810049] [<c10e3463>] ? fsnotify_clear_marks_by_inode+0x17/0x9e [ 291.810049] [<f88b3ec5>] ? vzquota_inode_data+0x3b/0xfc [vzdquota] [ 291.810049] [<fed82b3a>] ? ext4_delete_inode+0x0/0x21e [ext4] [ 291.810049] [<c1098300>] ? truncate_inode_pages+0x9/0xc [ 291.810049] [<fed82b8d>] ? ext4_delete_inode+0x53/0x21e [ext4] [ 291.810049] [<fed82b3a>] ? ext4_delete_inode+0x0/0x21e [ext4] [ 291.810049] [<c10cedc5>] ? generic_delete_inode+0xb3/0x12e [ 291.810049] [<c10cdf16>] ? iput+0x48/0x4a [ 291.810049] [<c10c83a7>] ? do_unlinkat+0xbe/0xfc [ 291.810049] [<c1021b83>] ? do_page_fault+0x271/0x287 [ 291.810049] [<c1008120>] ? syscall_call+0x7/0xb [ 291.810049] Code: Bad EIP value. [ 291.810049] EIP: [<00000000>] 0x0 SS:ESP 0068:f0527e58 [ 291.810049] CR2: 0000000000000000 [ 291.815596] ---[ end trace 64f0f49746fe4c62 ]--- [ 564.459374] atkbd.c: Unknown key pressed (translated set 2, code 0x0 on isa0060/serio0). [ 564.459469] atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known. ** Model information not available ** Loaded modules: Module Size Used by vzethdev 5593 0 vznetdev 11601 0 simfs 2535 0 vzrst 108798 0 vzcpt 93505 0 vzdquota 30157 0 [permanent] vzmon 12941 4 vzethdev,vznetdev,vzrst,vzcpt vzdev 1284 4 vzethdev,vznetdev,vzdquota,vzmon ip6t_REJECT 2152 0 ip6table_mangle 2619 0 ip6table_filter 1968 0 ip6_tables 8664 2 ip6table_mangle,ip6table_filter xt_tcpudp 1743 0 xt_length 796 0 xt_hl 925 0 xt_tcpmss 1017 0 xt_TCPMSS 2315 0 iptable_mangle 2377 0 iptable_filter 1842 0 ipmi_devintf 4033 2 xt_multiport 1775 0 xt_limit 1088 0 ipmi_si 26752 1 xt_dscp 1261 0 ipt_REJECT 1521 0 ipmi_msghandler 22871 2 ipmi_devintf,ipmi_si ip_tables 7826 2 iptable_mangle,iptable_filter x_tables 8651 12 ip6t_REJECT,ip6_tables,xt_tcpudp,xt_length,xt_hl,xt_tcpmss,xt_TCPMSS,xt_multiport,xt_limit,xt_dscp,ipt_REJECT,ip_tables cpufreq_conservative 4018 0 cpufreq_userspace 1480 0 cpufreq_stats 1940 0 cpufreq_powersave 602 0 nfsd 194367 13 exportfs 2758 1 nfsd nfs 209474 0 lockd 50434 2 nfsd,nfs fscache 24678 1 nfs nfs_acl 1695 2 nfsd,nfs auth_rpcgss 25244 2 nfsd,nfs ext4 254973 1 jbd2 56091 1 ext4 crc16 1027 1 ext4 p4_clockmod 2444 4 speedstep_lib 2468 1 p4_clockmod dell_rbu 3727 0 xprtrdma 28019 0 svcrdma 23678 1 sunrpc 137252 14 nfsd,nfs,lockd,nfs_acl,auth_rpcgss,xprtrdma,svcrdma ib_srp 17772 0 scsi_transport_srp 2794 1 ib_srp scsi_tgt 6846 1 scsi_transport_srp ib_ipoib 51317 0 ib_umad 7440 0 rdma_ucm 7381 0 rdma_cm 17850 3 xprtrdma,svcrdma,rdma_ucm ib_cm 22573 3 ib_srp,ib_ipoib,rdma_cm iw_cm 5123 1 rdma_cm ib_sa 13155 4 ib_srp,ib_ipoib,rdma_cm,ib_cm ib_addr 4257 1 rdma_cm ib_uverbs 21406 1 rdma_ucm loop 9761 0 snd_pcsp 5219 0 ib_mthca 101048 0 snd_pcm 47378 1 snd_pcsp ib_mad 26369 4 ib_umad,ib_cm,ib_sa,ib_mthca snd_timer 12262 1 snd_pcm tpm_tis 5576 0 tpm 8137 1 tpm_tis snd 34379 3 snd_pcsp,snd_pcm,snd_timer i2c_piix4 7124 0 ib_core 33231 13 xprtrdma,svcrdma,ib_srp,ib_ipoib,ib_umad,rdma_ucm,rdma_cm,ib_cm,iw_cm,ib_sa,ib_uverbs,ib_mthca,ib_mad tpm_bios 3577 1 tpm i2c_core 12696 1 i2c_piix4 soundcore 3454 1 snd dcdbas 3940 0 evdev 5613 2 shpchp 21264 0 pci_hotplug 18069 1 shpchp snd_page_alloc 5121 1 snd_pcm button 3606 0 processor 26627 0 ext3 94148 2 jbd 32185 1 ext3 mbcache 3762 2 ext4,ext3 dm_mod 46106 12 sr_mod 10826 0 cdrom 26487 1 sr_mod ata_generic 2019 0 sg 15980 0 sd_mod 25873 3 crc_t10dif 1012 1 sd_mod pata_serverworks 3969 0 libata 115997 2 ata_generic,pata_serverworks ohci_hcd 17076 0 aic7xxx 95555 0 megaraid_mbox 21026 2 qla1280 16957 0 megaraid_mm 5455 1 megaraid_mbox tg3 88621 0 ehci_hcd 28191 0 libphy 11642 1 tg3 scsi_transport_spi 14870 1 aic7xxx floppy 40931 0 usbcore 98842 3 ohci_hcd,ehci_hcd nls_base 4541 1 usbcore thermal 9226 0 scsi_mod 101441 11 ib_srp,scsi_transport_srp,scsi_tgt,sr_mod,sg,sd_mod,libata,aic7xxx,megaraid_mbox,qla1280,scsi_transport_spi thermal_sys 9378 2 processor,thermal ** PCI devices: 00:00.0 Host bridge [0600]: Broadcom CMIC-HE [1166:0011] (rev 22) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:00.1 Host bridge [0600]: Broadcom CMIC-HE [1166:0011] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:00.2 Host bridge [0600]: Broadcom CMIC-HE [1166:0011] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:00.3 Host bridge [0600]: Broadcom CMIC-HE [1166:0011] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:03.0 SCSI storage controller [0100]: Adaptec AIC-7892P U160/m [9005:008f] (rev 02) Subsystem: Dell Device [1028:0109] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (10000ns min, 6250ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 BIST result: 00 Region 0: I/O ports at ec00 [disabled] [size=256] Region 1: Memory at fe103000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at fe000000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: aic7xxx 00:04.0 VGA compatible controller [0300]: ATI Technologies Inc Rage XL [1002:4752] (rev 27) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:0109] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (2000ns min), Cache Line Size: 64 bytes Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: I/O ports at e800 [size=256] Region 2: Memory at fe102000 (32-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at d0000000 [disabled] [size=128K] Capabilities: [5c] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- 00:05.0 Class [ff00]: Dell Remote Access Card III [1028:0007] Subsystem: Dell Remote Access Card III [1028:0007] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at feb80000 (32-bit, prefetchable) [size=4K] Region 1: I/O ports at e4f8 [size=8] Region 2: I/O ports at e4e8 [size=8] Expansion ROM at d0020000 [disabled] [size=64K] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- 00:05.1 Class [ff00]: Dell Remote Access Card III [1028:0008] Subsystem: Dell Remote Access Card III [1028:0008] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 31 Region 0: Memory at fe101000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at e480 [size=64] Region 2: Memory at feb00000 (32-bit, prefetchable) [size=512K] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: serial 00:05.2 Class [ff00]: Dell Remote Access Card III: BMC/SMIC device not present [1028:0009] Subsystem: Dell Remote Access Card III: BMC/SMIC device not present [1028:0009] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 5 Region 0: I/O ports at e4f4 [size=4] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- 00:0f.0 Host bridge [0600]: Broadcom CSB5 South Bridge [1166:0201] (rev 93) Subsystem: Broadcom CSB5 South Bridge [1166:0201] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 64 00:0f.1 IDE interface [0101]: Broadcom CSB5 IDE Controller [1166:0212] (rev 93) (prog-if 82 [Master PriP]) Subsystem: Broadcom CSB5 IDE Controller [1166:0212] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 08b0 [size=16] Kernel driver in use: pata_serverworks 00:0f.2 USB Controller [0c03]: Broadcom OSB4/CSB5 OHCI USB Controller [1166:0220] (rev 05) (prog-if 10 [OHCI]) Subsystem: Broadcom OSB4/CSB5 OHCI USB Controller [1166:0220] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (20000ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at fe100000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:0f.3 ISA bridge [0601]: Broadcom CSB5 LPC bridge [1166:0225] Subsystem: Broadcom Dell PowerEdge 1650/1750 [1166:0230] Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:10.0 Host bridge [0600]: Broadcom CIOB30 [1166:0010] (rev 03) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Capabilities: [60] PCI-X non-bridge device Command: DPERE- ERO- RBC=512 OST=8 Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=bridge DMMRBC=512 DMOST=8 DMCRS=8 RSCEM- 266MHz- 533MHz- 00:10.2 Host bridge [0600]: Broadcom CIOB30 [1166:0010] (rev 03) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Capabilities: [60] PCI-X non-bridge device Command: DPERE- ERO- RBC=512 OST=8 Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=bridge DMMRBC=512 DMOST=8 DMCRS=8 RSCEM- 266MHz- 533MHz- 00:11.0 Host bridge [0600]: Broadcom CIOB30 [1166:0010] (rev 03) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Capabilities: [60] PCI-X non-bridge device Command: DPERE- ERO- RBC=512 OST=8 Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=bridge DMMRBC=512 DMOST=8 DMCRS=8 RSCEM- 266MHz- 533MHz- 00:11.2 Host bridge [0600]: Broadcom CIOB30 [1166:0010] (rev 03) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Capabilities: [60] PCI-X non-bridge device Command: DPERE- ERO- RBC=512 OST=8 Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=bridge DMMRBC=512 DMOST=8 DMCRS=8 RSCEM- 266MHz- 533MHz- 00:12.0 Host bridge [0600]: Broadcom CIOB30 [1166:0010] (rev 03) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Capabilities: [60] PCI-X non-bridge device Command: DPERE- ERO- RBC=512 OST=8 Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=bridge DMMRBC=512 DMOST=8 DMCRS=8 RSCEM- 266MHz- 533MHz- 00:12.2 Host bridge [0600]: Broadcom CIOB30 [1166:0010] (rev 03) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Capabilities: [60] PCI-X non-bridge device Command: DPERE- ERO- RBC=512 OST=8 Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=bridge DMMRBC=512 DMOST=8 DMCRS=8 RSCEM- 266MHz- 533MHz- 03:01.0 PCI bridge [0604]: Intel Corporation 21154 PCI-to-PCI Bridge [8086:b154] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Bus: primary=03, secondary=04, subordinate=05, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fcd00000-fcffffff Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ 04:00.0 PCI bridge [0604]: Intel Corporation 21154 PCI-to-PCI Bridge [8086:b154] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Bus: primary=04, secondary=05, subordinate=05, sec-latency=32 Memory behind bridge: fcf00000-fcffffff Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ 04:01.0 SCSI storage controller [0100]: QLogic Corp. ISP12160 Dual Channel Ultra3 SCSI Processor [1077:1216] (rev 06) Subsystem: American Megatrends Inc. QLA12160 on AMI MegaRAID [101e:8493] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (16000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at dc00 [size=256] Region 1: Memory at fcdff000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at fce00000 [disabled] [size=128K] Capabilities: [44] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- 05:00.0 RAID bus controller [0104]: American Megatrends Inc. MegaRAID [101e:1960] (rev 20) Subsystem: Dell PowerEdge RAID Controller 3/DC [1028:0493] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 21 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Expansion ROM at fcf00000 [disabled] [size=64K] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: megaraid 0a:01.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5700 Gigabit Ethernet [14e4:1644] (rev 14) Subsystem: Dell Broadcom BCM5700 1000Base-T [1028:0109] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (16000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at eff10000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] PCI-X non-bridge device Command: DPERE- ERO+ RBC=512 OST=1 Status: Dev=ff:1f.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=512 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz- Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data Product Name: Broadcom NetXtreme Gigabit Ethernet Controller Read-only fields: [PN] Part number: BCM95700A6 [EC] Engineering changes: 107070-16 [SN] Serial number: 0123456789 [MN] Manufacture ID: 31 34 65 34 [RV] Reserved: checksum bad, 26 byte(s) reserved Read/write fields: [YA] Asset tag: XYZ01234567 [RW] Read-write area: 107 byte(s) free End Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+ Address: 23411fb005c7a768 Data: c4c3 Kernel driver in use: tg3 0a:02.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5700 Gigabit Ethernet [14e4:1644] (rev 14) Subsystem: Dell Broadcom BCM5700 1000Base-T [1028:0109] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (16000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at eff00000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] PCI-X non-bridge device Command: DPERE- ERO+ RBC=512 OST=1 Status: Dev=ff:1f.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=512 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz- Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data Product Name: Broadcom NetXtreme Gigabit Ethernet Controller Read-only fields: [PN] Part number: BCM95700A6 [EC] Engineering changes: 107070-16 [SN] Serial number: 0123456789 [MN] Manufacture ID: 31 34 65 34 [RV] Reserved: checksum bad, 26 byte(s) reserved Read/write fields: [YA] Asset tag: XYZ01234567 [RW] Read-write area: 107 byte(s) free End Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+ Address: 85101f90203ac410 Data: a624 Kernel driver in use: tg3 15:01.0 PCI bridge [0604]: Mellanox Technologies MT23108 PCI Bridge [15b3:5a46] (rev a1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Bus: primary=15, secondary=16, subordinate=16, sec-latency=64 I/O behind bridge: 00007000-00007fff Memory behind bridge: ed200000-ed3fffff Prefetchable memory behind bridge: 00000000d8000000-00000000e7ffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [70] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz Status: Dev=15:01.0 64bit+ 133MHz+ SCD- USC- SCO- SRD- Upstream: Capacity=512 CommitmentLimit=512 Downstream: Capacity=128 CommitmentLimit=128 16:00.0 InfiniBand [0c06]: Mellanox Technologies MT23108 InfiniHost [15b3:5a44] (rev a1) Subsystem: Mellanox Technologies MT23108 InfiniHost [15b3:5a44] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 29 Region 0: Memory at ed200000 (64-bit, non-prefetchable) [size=1M] Region 2: Memory at e7800000 (64-bit, prefetchable) [size=8M] Region 4: Memory at d8000000 (64-bit, prefetchable) [size=128M] Capabilities: [40] MSI-X: Enable+ Count=32 Masked- Vector table: BAR=0 offset=00082000 PBA: BAR=0 offset=00082200 Capabilities: [50] Vital Product Data Product Name: Cougar cub Read-only fields: [PN] Part number: 99-00025-01 [EC] Engineering changes: Rev: C04 [SN] Serial number: TS0451F00669 [V0] Vendor specific: PW=12W;PCI 66MHZ;PCI-X 133MHZ [V2] Vendor specific: 0451 [RV] Reserved: checksum good, 0 byte(s) reserved Read/write fields: [V1] Vendor specific: N/A [YA] Asset tag: N/A [RW] Read-write area: 94 byte(s) free End Capabilities: [60] MSI: Enable- Count=1/32 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [70] PCI-X non-bridge device Command: DPERE- ERO- RBC=4096 OST=2 Status: Dev=16:00.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=4096 DMOST=2 DMCRS=8 RSCEM- 266MHz- 533MHz- Kernel driver in use: ib_mthca 1b:01.0 PCI bridge [0604]: Mellanox Technologies MT23108 PCI Bridge [15b3:5a46] (rev a1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Bus: primary=1b, secondary=1c, subordinate=1c, sec-latency=64 I/O behind bridge: 00006000-00006fff Memory behind bridge: d7e00000-d7ffffff Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [70] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz Status: Dev=1b:01.0 64bit+ 133MHz+ SCD- USC- SCO- SRD- Upstream: Capacity=512 CommitmentLimit=512 Downstream: Capacity=128 CommitmentLimit=128 1c:00.0 InfiniBand [0c06]: Mellanox Technologies MT23108 InfiniHost [15b3:5a44] (rev a1) Subsystem: Mellanox Technologies MT23108 InfiniHost [15b3:5a44] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 27 Region 0: Memory at d7e00000 (64-bit, non-prefetchable) [size=1M] Region 2: Memory at cf800000 (64-bit, prefetchable) [size=8M] Region 4: Memory at c0000000 (64-bit, prefetchable) [size=128M] Capabilities: [40] MSI-X: Enable+ Count=32 Masked- Vector table: BAR=0 offset=00082000 PBA: BAR=0 offset=00082200 Capabilities: [50] Vital Product Data Product Name: Cougar cub Read-only fields: [PN] Part number: 99-00025-01 [EC] Engineering changes: Rev: C03 [SN] Serial number: TS0443F00824 [V0] Vendor specific: PW=12W;PCI 66MHZ;PCI-X 133MHZ [V2] Vendor specific: 0443 [RV] Reserved: checksum good, 0 byte(s) reserved Read/write fields: [V1] Vendor specific: N/A [YA] Asset tag: N/A [RW] Read-write area: 94 byte(s) free End Capabilities: [60] MSI: Enable- Count=1/32 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [70] PCI-X non-bridge device Command: DPERE- ERO- RBC=4096 OST=2 Status: Dev=1c:00.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=4096 DMOST=2 DMCRS=8 RSCEM- 266MHz- 533MHz- Kernel driver in use: ib_mthca ** USB devices: Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-openvz-686 (SMP w/8 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-openvz-686 depends on: ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy ii initramfs-tools [linux-initr 0.94.4 tools for generating an initramfs ii linux-base 2.6.32-15 Linux image base package ii module-init-tools 3.12~pre2-3 tools for managing Linux kernel mo ii vzctl 3.0.23-17 server virtualization solution - c Versions of packages linux-image-2.6.32-5-openvz-686 recommends: ii firmware-linux-free 2.6.32-15 Binary firmware for various driver ii libc6-i686 2.11.1-3 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.32-5-openvz-686 suggests: ii grub 0.97-61 GRand Unified Bootloader (dummy pa pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-openvz-686 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) ii firmware-linux 0.24 Binary firmware for various driver ii firmware-linux-nonfree 0.24 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.32-5-openvz-686/postinst/missing-firmware-2.6.32-5-openvz-686: linux-image-2.6.32-5-openvz-686/postinst/bootloader-error-2.6.32-5-openvz-686: linux-image-2.6.32-5-openvz-686/prerm/would-invalidate-boot-loader-2.6.32-5-openvz-686: true linux-image-2.6.32-5-openvz-686/postinst/bootloader-test-error-2.6.32-5-openvz-686: linux-image-2.6.32-5-openvz-686/postinst/depmod-error-initrd-2.6.32-5-openvz-686: false linux-image-2.6.32-5-openvz-686/prerm/removing-running-kernel-2.6.32-5-openvz-686: true -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
