Hi
I've done update of firmware of both reader and motherboard bios and
managed to boot withouyt any error in enhanced mode.
Bug seem to be bios related and could be closed.
----- Message Transféré -----
Date: Sun, 13 Jun 2010 13:42:19 -0700 (PDT)
De: Will Set <debiandu...@yahoo.com>
À: jeanseb <jeanseb.vale...@free.fr>
Sujet: Re: Bug#585556: full dmesg output from boot
Again, please forward this email to the mailing list
--- On Sun, 6/13/10, jeanseb <jeanseb.vale...@free.fr> wrote:
> From: jeanseb <jeanseb.vale...@free.fr>
> Subject: Re: Bug#585556: full dmesg output from boot
> To: "Will Set" <debiandu...@yahoo.com>
> Date: Sunday, June 13, 2010, 5:56 PM
>
> hi,
> in fact drive were unsable as when benting back the
> pin I unpluged
> motor ribbbon.
> When pluged the probleme occurs again.
>
> I did manèy test including installing XP on second disk
> free space to
> check.
> It work fine under M$ stuff.
>
> I manage to make it work under linux by setrting compatible
> mode in
> bios, buty i've lost second hard drive (hard drive are
> sata).
>
> Dmesg seem to show theat in this case irq is disabled
> cleanly.
>
> I think bug could be closed as workaroung is found,
> but there something
> to fix in case of enhanced mode selected.
>
> thanxs for help
> Le Sun, 13 Jun 2010 10:57:50 -0700 (PDT),
> Will Set <debiandu...@yahoo.com>
> a écrit :
>
> > Please close your bug
> > "linux-image-2.6.32-5: Boot is vey long and disk acces
> make computer
> > hang for a short time in some condition (flash
> reading, recording
> > with edirol ua 25 usb sound card)." Unless you think
> faulty hardware
> > a reason to keep this bug open....
> >
> > Forwarding this email to the mailing list will notify
> both
> > debian.kernel and upstrream of your
> intentions..
> >
> > Thanks for reporting this
> >
> >
> > --- On Sun, 6/13/10, jeanseb <jeanseb.vale...@free.fr>
> wrote:
> >
> > > From: jeanseb <jeanseb.vale...@free.fr>
> > > Subject: Re: Bug#585556: full dmesg output from
> boot
> > > To: "Will Set" <debiandu...@yahoo.com>
> > > Date: Sunday, June 13, 2010, 6:51 AM
> > > hi
> > > I've check with another drive no more timeout.
> > > So i check the drive and found a bent pin, after
> benting it
> > > back over
> > > it work without timeout.
> > >
> > > There's still have crash trapped in boot time
> dmesg output
> > > and disk
> > > led flashing on and off at a fast beat.
> > >
> > > As mention i tried irqpoll options, same but led
> is fixed
> > >
> > > Le Sat, 12 Jun 2010 14:28:36 -0700 (PDT),
> > > Will Set <debiandu...@yahoo.com>
> > > a écrit :
> > >
> > > > here is a list of possible causes: with
> possible (
> > > solutions in
> > > > apprentices )
> > > >
> > > > DVD-RW is not jumped master (change jumper
> to slave)
> > > > DVD-RW drive has a broken or bent data pin (
> if broken
> > > pin(s)
> > > > replace DVD-RWdrive ) The data tape cable
> is 40
> > > wire (change to an
> > > > 80 wire data cable) The data tape cable is
> faulty (
> > > replace data
> > > > cable - use 80 wire data tape cable) The
> hard disk
> > > that shares the
> > > > data cable with the DVD-RW is jumped as
> single (change
> > > hard disk to
> > > > master and DVD-RW drive to slave)
> > > >
> > > > be patient when checking
> > > > leave machine off for an hour or two or
> > > overnight after making
> > > > several changes that don't appear to be
> sucessful...
> > > Sometimes
> > > > booting from a machine that has been off ofr
> a while
> > > chaanges some
> > > > things you wouldn't think it might
> change...
> > > >
> > > >
> > > > If you are able to fix your bug, please
> send a
> > > "fixed please close
> > > > this bug" request to the mailing list....
> > > >
> > > > thanks
> > > >
> > > >
> > > > --- On Sat, 6/12/10, jeanseb <jeanseb.vale...@free.fr>
> > > wrote:
> > > >
> > > > > From: jeanseb <jeanseb.vale...@free.fr>
> > > > > Subject: Re: Bug#585556: full dmesg
> output from
> > > boot
> > > > > To: "Will Set" <debiandu...@yahoo.com>
> > > > > Date: Saturday, June 12, 2010, 3:05 AM
> > > > > hi
> > > > > without cd it boot very fast.
> > > > > here dmesg output.
> > > > >
> > > > >
> > > > > Le Fri, 11 Jun 2010 18:21:39 -0700
> (PDT),
> > > > > Will Set <debiandu...@yahoo.com>
> > > > > a écrit :
> > > > >
> > > > > > shutdown machine
> > > > > > remove the DVD-RW devices data
> plug and
> > > power plug
> > > > > > restart the machine
> > > > > > reply with new dmesg
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> >
> >
> >
>
>
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
