Dear Mattia,
Am Donnerstag, den 03.06.2010, 21:19 +0900 schrieb Mattia Dongili:
> On Wed, Jun 02, 2010 at 10:37:34PM +0200, Paul Menzel wrote:
> ...
> > $ more /proc/cpuinfo
> > processor : 0
> > vendor_id : AuthenticAMD
> > cpu family : 6
> > model : 6
> > model name : AMD Athlon(tm) XP 1600+
> > stepping : 2
> > cpu MHz : 1395.989
>
> it looks like the cpufreq driver (as opposed to the governor) didn't get
> loaded.
> Can you check if you see any error in the kernel log (dmesg) that might
> be related (feel free to send over the whole output from dmesg).
I did not spot anything. But please see yourself.
> Or you can try:
> $ modprobe powernow-k7
$ sudo modprobe powernow-k7
FATAL: Error inserting powernow_k7
(/lib/modules/2.6.32-5-686/kernel/arch/x86/kernel/cpu/cpufreq/powernow-k7.ko):
No such device
> $ modprobe ondemand
$ sudo modprobe ondemand
FATAL: Module ondemand not found.
> and see they succeed, if so I'll try (with your help ;)) to figure out
> why powernow-k7 didn't get automatically loaded.
»No such device«. No idea if some ID is missing or if CPUFreq does not
support my CPU.
Thanks,
Paul
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-14) (b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Sun May 30 12:04:26 UTC 2010 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) [ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.2 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x1fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 base 0D0000000 mask FF8000000 write-combining [ 0.000000] 2 base 0D0000000 mask FF8000000 write-combining [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] init_memory_mapping: 0000000000000000-000000001fff0000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 001fc00000 page 2M [ 0.000000] 001fc00000 - 001fff0000 page 4k [ 0.000000] kernel direct mapping tables up to 1fff0000 @ 10000-16000 [ 0.000000] RAMDISK: 17855000 - 180338ef [ 0.000000] ACPI: RSDP 000f62e0 00014 (v00 VIA694) [ 0.000000] ACPI: RSDT 1fff3000 00028 (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 1fff3040 00074 (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 1fff30c0 03316 (v01 VIA694 AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 1fff0000 00040 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1fff0000 [ 0.000000] low ram: 0 - 1fff0000 [ 0.000000] node 0 low ram: 00000000 - 1fff0000 [ 0.000000] node 0 bootmap 00012000 - 00016000 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001fff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0001000000 - 00014c3154] TEXT DATA BSS ==> [0001000000 - 00014c3154] [ 0.000000] #4 [0017855000 - 00180338ef] RAMDISK ==> [0017855000 - 00180338ef] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [00014c4000 - 00014ca08a] BRK ==> [00014c4000 - 00014ca08a] [ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #8 [0000012000 - 0000016000] BOOTMAP ==> [0000012000 - 0000016000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001fff0 [ 0.000000] HighMem 0x0001fff0 -> 0x0001fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001fff0 [ 0.000000] On node 0 totalpages: 130943 [ 0.000000] free_area_init_node: node 0, pgdat c13ae680, node_mem_map c14cc200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 992 pages used for memmap [ 0.000000] Normal zone: 125968 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dfff0000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s34136 r0 d23208 u4194304 [ 0.000000] pcpu-alloc: s34136 r0 d23208 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129919 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=582643ad-cb1e-4a01-bca4-5c8ad8562447 ro init=/sbin/bootchartd quiet [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 505892k/524224k available (2490k kernel code, 17560k reserved, 1318k data, 372k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB) [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.000000] vmalloc : 0xe07f0000 - 0xff3fe000 ( 492 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) [ 0.000000] .init : 0xc13b9000 - 0xc1416000 ( 372 kB) [ 0.000000] .data : 0xc126e965 - 0xc13b81e0 (1318 kB) [ 0.000000] .text : 0xc1000000 - 0xc126e965 (2490 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:1280 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1396.018 MHz processor. [ 0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 2792.03 BogoMIPS (lpj=5584072) [ 0.004045] Security Framework initialized [ 0.004058] SELinux: Disabled at boot. [ 0.004072] Mount-cache hash table entries: 512 [ 0.008189] Initializing cgroup subsys ns [ 0.008197] Initializing cgroup subsys cpuacct [ 0.008205] Initializing cgroup subsys devices [ 0.008210] Initializing cgroup subsys freezer [ 0.008215] Initializing cgroup subsys net_cls [ 0.008259] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.008265] CPU: L2 Cache: 256K (64 bytes/line) [ 0.008273] mce: CPU supports 4 MCE banks [ 0.008315] Performance Events: AMD PMU driver. [ 0.008335] ... version: 0 [ 0.008338] ... bit width: 48 [ 0.008342] ... generic registers: 4 [ 0.008345] ... value mask: 0000ffffffffffff [ 0.008349] ... max period: 00007fffffffffff [ 0.008353] ... fixed-purpose events: 0 [ 0.008356] ... event mask: 000000000000000f [ 0.008364] Checking 'hlt' instruction... OK. [ 0.024440] SMP alternatives: switching to UP code [ 0.029719] Freeing SMP alternatives: 13k freed [ 0.029755] ACPI: Core revision 20090903 [ 0.037861] ACPI: setting ELCR to 0200 (from 0e20) [ 0.039925] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.039933] weird, boot CPU (#0) not listed by the BIOS. [ 0.039936] SMP motherboard not detected. [ 0.039941] Local APIC not detected. Using dummy APIC emulation. [ 0.039944] SMP disabled [ 0.040260] Brought up 1 CPUs [ 0.040265] Total of 1 processors activated (2792.03 BogoMIPS). [ 0.040668] CPU0 attaching NULL sched-domain. [ 0.040954] devtmpfs: initialized [ 0.041639] regulator: core version 0.5 [ 0.041734] NET: Registered protocol family 16 [ 0.041890] ACPI: bus type pci registered [ 0.044136] PCI: PCI BIOS revision 2.10 entry at 0xfb3e0, last bus=1 [ 0.044140] PCI: Using configuration type 1 for base access [ 0.044737] bio: create slab <bio-0> at 0 [ 0.045318] ACPI: EC: Look up EC in DSDT [ 0.051526] ACPI: Interpreter enabled [ 0.051541] ACPI: (supports S0 S1 S4 S5) [ 0.051580] ACPI: Using PIC for interrupt routing [ 0.057083] ACPI: No dock devices found. [ 0.057229] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.057304] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xd0000000-0xd7ffffff] [ 0.057410] pci 0000:00:01.0: supports D1 [ 0.057478] pci 0000:00:10.0: reg 20 io port: [0xd000-0xd01f] [ 0.057506] pci 0000:00:10.0: supports D1 D2 [ 0.057511] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.057518] pci 0000:00:10.0: PME# disabled [ 0.057570] pci 0000:00:10.1: reg 20 io port: [0xd400-0xd41f] [ 0.057598] pci 0000:00:10.1: supports D1 D2 [ 0.057602] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.057608] pci 0000:00:10.1: PME# disabled [ 0.057661] pci 0000:00:10.2: reg 20 io port: [0xd800-0xd81f] [ 0.057688] pci 0000:00:10.2: supports D1 D2 [ 0.057692] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.057698] pci 0000:00:10.2: PME# disabled [ 0.057735] pci 0000:00:10.3: reg 10 32bit mmio: [0xe2000000-0xe20000ff] [ 0.057778] pci 0000:00:10.3: supports D1 D2 [ 0.057782] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.057788] pci 0000:00:10.3: PME# disabled [ 0.057859] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.057870] pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM [ 0.057876] pci 0000:00:11.0: quirk: region 5000-500f claimed by vt8235 SMB [ 0.057945] pci 0000:00:11.1: reg 20 io port: [0xdc00-0xdc0f] [ 0.058014] pci 0000:00:11.5: reg 10 io port: [0xe000-0xe0ff] [ 0.058059] pci 0000:00:11.5: supports D1 D2 [ 0.058099] pci 0000:00:12.0: reg 10 io port: [0xe800-0xe8ff] [ 0.058108] pci 0000:00:12.0: reg 14 32bit mmio: [0xe2001000-0xe20010ff] [ 0.058149] pci 0000:00:12.0: supports D1 D2 [ 0.058153] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.058159] pci 0000:00:12.0: PME# disabled [ 0.058217] pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xe0ffffff] [ 0.058226] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xd8000000-0xdfffffff] [ 0.058247] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.058308] pci 0000:00:01.0: bridge 32bit mmio: [0xe0000000-0xe1ffffff] [ 0.058315] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff] [ 0.058326] pci_bus 0000:00: on NUMA node 0 [ 0.058335] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.079358] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) [ 0.079597] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) [ 0.079840] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) [ 0.080100] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) [ 0.080290] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.080295] vgaarb: loaded [ 0.080467] PCI: Using ACPI for IRQ routing [ 0.080700] Switching to clocksource tsc [ 0.082945] pnp: PnP ACPI init [ 0.083000] ACPI: bus type pnp registered [ 0.086799] pnp: PnP ACPI: found 13 devices [ 0.086803] ACPI: ACPI bus type pnp unregistered [ 0.086811] PnPBIOS: Disabled by ACPI PNP [ 0.086832] system 00:00: iomem range 0xd0000-0xd3fff has been reserved [ 0.086838] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved [ 0.086844] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved [ 0.086850] system 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 0.086856] system 00:00: iomem range 0x1fff0000-0x1fffffff could not be reserved [ 0.086862] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved [ 0.086868] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.086874] system 00:00: iomem range 0x100000-0x1ffeffff could not be reserved [ 0.086880] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.086886] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved [ 0.086897] system 00:02: ioport range 0x4000-0x407f has been reserved [ 0.086903] system 00:02: ioport range 0x5000-0x500f has been reserved [ 0.086913] system 00:03: ioport range 0x4d0-0x4d1 has been reserved [ 0.086919] system 00:03: ioport range 0x800-0x805 has been reserved [ 0.086925] system 00:03: ioport range 0x290-0x297 has been reserved [ 0.121867] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.121872] pci 0000:00:01.0: IO window: disabled [ 0.121880] pci 0000:00:01.0: MEM window: 0xe0000000-0xe1ffffff [ 0.121887] pci 0000:00:01.0: PREFETCH window: 0xd8000000-0xdfffffff [ 0.121909] pci 0000:00:01.0: setting latency timer to 64 [ 0.121918] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.121923] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.121929] pci_bus 0000:01: resource 1 mem: [0xe0000000-0xe1ffffff] [ 0.121934] pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff] [ 0.121998] NET: Registered protocol family 2 [ 0.122157] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.122689] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.123001] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.123358] TCP: Hash tables configured (established 16384 bind 16384) [ 0.123363] TCP reno registered [ 0.123538] NET: Registered protocol family 1 [ 0.123582] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.123684] pci 0000:01:00.0: Boot video device [ 0.123793] Unpacking initramfs... [ 0.473651] Freeing initrd memory: 8058k freed [ 0.492992] audit: initializing netlink socket (disabled) [ 0.493022] type=2000 audit(1275593962.491:1): initialized [ 0.493319] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.495895] VFS: Disk quotas dquot_6.5.2 [ 0.496008] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.496140] msgmni has been set to 1004 [ 0.496502] alg: No test for stdrng (krng) [ 0.496551] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.496557] io scheduler noop registered [ 0.496562] io scheduler anticipatory registered [ 0.496566] io scheduler deadline registered [ 0.496631] io scheduler cfq registered (default) [ 0.496910] isapnp: Scanning for PnP cards... [ 0.850385] isapnp: No Plug & Play device found [ 0.852803] Linux agpgart interface v0.103 [ 0.852999] agpgart: Detected VIA KT266/KY266x/KT333 chipset [ 0.862754] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xd0000000 [ 0.862796] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.862918] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.863035] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.863482] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.863637] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.863850] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.863855] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.864003] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.864160] mice: PS/2 mouse device common for all mice [ 0.864237] rtc_cmos 00:05: RTC can wake from S4 [ 0.864311] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.864341] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.864361] cpuidle: using governor ladder [ 0.864366] cpuidle: using governor menu [ 0.864374] No iBFT detected. [ 0.865029] TCP cubic registered [ 0.865274] NET: Registered protocol family 10 [ 0.866037] lo: Disabled Privacy Extensions [ 0.866576] Mobile IPv6 [ 0.866582] NET: Registered protocol family 17 [ 0.866622] Using IPI No-Shortcut mode [ 0.866748] PM: Resume from disk failed. [ 0.866763] registered taskstats version 1 [ 0.867057] rtc_cmos 00:05: setting system clock to 2010-06-03 19:39:23 UTC (1275593963) [ 0.867103] Initalizing network drop monitor service [ 0.867156] Freeing unused kernel memory: 372k freed [ 0.868065] Write protecting the kernel text: 2492k [ 0.868099] Write protecting the kernel read-only data: 916k [ 0.888338] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.903550] udev: starting version 154 [ 1.258444] SCSI subsystem initialized [ 1.285796] usbcore: registered new interface driver usbfs [ 1.286069] usbcore: registered new interface driver hub [ 1.286360] usbcore: registered new device driver usb [ 1.292178] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 1.292189] via-rhine: Broken BIOS detected, avoid_D3 enabled. [ 1.292914] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 1.292920] PCI: setting IRQ 11 as level-triggered [ 1.292929] via-rhine 0000:00:12.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 1.300115] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.305629] Floppy drive(s): fd0 is 1.44M [ 1.341379] eth0: VIA Rhine II at 0x1e800, 00:0a:e6:99:8c:b5, IRQ 11. [ 1.342099] eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1. [ 1.343565] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 [ 1.343571] PCI: setting IRQ 5 as level-triggered [ 1.343580] ehci_hcd 0000:00:10.3: PCI INT D -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5 [ 1.343616] ehci_hcd 0000:00:10.3: EHCI Host Controller [ 1.343681] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1 [ 1.343759] ehci_hcd 0000:00:10.3: irq 5, io mem 0xe2000000 [ 1.344488] FDC 0 is a post-1991 82077 [ 1.352243] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00 [ 1.352310] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.352316] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.352321] usb usb1: Product: EHCI Host Controller [ 1.352325] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd [ 1.352329] usb usb1: SerialNumber: 0000:00:10.3 [ 1.352530] usb usb1: configuration #1 chosen from 1 choice [ 1.352600] hub 1-0:1.0: USB hub found [ 1.352624] hub 1-0:1.0: 6 ports detected [ 1.359068] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.359087] ACPI: Thermal Zone [THRM] (40 C) [ 1.363322] libata version 3.00 loaded. [ 1.363797] uhci_hcd: USB Universal Host Controller Interface driver [ 1.363941] uhci_hcd 0000:00:10.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 1.363961] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 1.363990] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 1.364109] uhci_hcd 0000:00:10.0: irq 11, io base 0x0000d000 [ 1.364201] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.364207] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.364212] usb usb2: Product: UHCI Host Controller [ 1.364216] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd [ 1.364220] usb usb2: SerialNumber: 0000:00:10.0 [ 1.370178] usb usb2: configuration #1 chosen from 1 choice [ 1.370452] hub 2-0:1.0: USB hub found [ 1.370478] hub 2-0:1.0: 2 ports detected [ 1.371268] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 1.371277] uhci_hcd 0000:00:10.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 1.371295] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 1.371318] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 1.371357] uhci_hcd 0000:00:10.1: irq 11, io base 0x0000d400 [ 1.371438] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.371444] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.371449] usb usb3: Product: UHCI Host Controller [ 1.371453] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd [ 1.371457] usb usb3: SerialNumber: 0000:00:10.1 [ 1.377681] usb usb3: configuration #1 chosen from 1 choice [ 1.377968] hub 3-0:1.0: USB hub found [ 1.377989] hub 3-0:1.0: 2 ports detected [ 1.378766] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 [ 1.378772] PCI: setting IRQ 10 as level-triggered [ 1.378781] uhci_hcd 0000:00:10.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 1.378800] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 1.378822] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 1.378863] uhci_hcd 0000:00:10.2: irq 10, io base 0x0000d800 [ 1.378947] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.378952] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.378957] usb usb4: Product: UHCI Host Controller [ 1.378961] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd [ 1.378965] usb usb4: SerialNumber: 0000:00:10.2 [ 1.379701] usb usb4: configuration #1 chosen from 1 choice [ 1.381816] hub 4-0:1.0: USB hub found [ 1.381852] hub 4-0:1.0: 2 ports detected [ 1.381980] pata_via 0000:00:11.1: version 0.3.4 [ 1.382013] pata_via 0000:00:11.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 1.382022] pata_via 0000:00:11.1: VIA VLink IRQ fixup, from 255 to 11 [ 1.382730] scsi0 : pata_via [ 1.384972] fan PNP0C0B:00: registered as cooling_device0 [ 1.384987] ACPI: Fan [FAN] (on) [ 1.385651] scsi1 : pata_via [ 1.389975] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xdc00 irq 14 [ 1.389982] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xdc08 irq 15 [ 1.564534] ata1.00: ATA-6: SAMSUNG SV2042H, PK100-21, max UDMA/100 [ 1.564543] ata1.00: 39865392 sectors, multi 16: LBA [ 1.564592] ata1.01: ATAPI: ATAPI CDROM 48X, V180J, max UDMA/33 [ 1.572386] ata1.00: configured for UDMA/100 [ 1.580316] ata1.01: configured for UDMA/33 [ 1.580726] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SV2042H PK10 PQ: 0 ANSI: 5 [ 1.581540] scsi 0:0:1:0: CD-ROM ATAPI CDROM.48X 180J PQ: 0 ANSI: 5 [ 1.744427] ata2.00: ATAPI: sf03 SAMSUNG DVD-ROM SD-612S, , max UDMA/33 [ 1.760310] ata2.00: configured for UDMA/33 [ 1.761012] scsi 1:0:0:0: CD-ROM SAMSUNG DVD-ROM SD-612S sf03 PQ: 0 ANSI: 5 [ 1.789563] sd 0:0:0:0: [sda] 39865392 512-byte logical blocks: (20.4 GB/19.0 GiB) [ 1.789662] sd 0:0:0:0: [sda] Write Protect is off [ 1.789669] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.789711] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.789964] sda: sda1 sda2 < sda5 > [ 1.833162] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.837959] sr0: scsi3-mmc drive: 0x/12x cd/rw xa/form2 cdda tray [ 1.837969] Uniform CD-ROM driver Revision: 3.20 [ 1.838783] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 1.841733] sr1: scsi3-mmc drive: 1x/40x cd/rw xa/form2 cdda tray [ 1.841974] sr 1:0:0:0: Attached scsi CD-ROM sr1 [ 1.870733] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.870912] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 1.871693] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 2.754172] PM: Starting manual resume from disk [ 2.754183] PM: Resume from partition 8:5 [ 2.754186] PM: Checking hibernation image. [ 2.775754] PM: Error -22 checking image file [ 2.775759] PM: Resume from disk failed. [ 2.874558] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 16.941154] udev: starting version 154 [ 17.559472] NET: Registered protocol family 23 [ 17.576206] Marking TSC unstable due to TSC halts in idle [ 17.578059] processor LNXCPU:00: registered as cooling_device1 [ 17.578520] Switching to clocksource acpi_pm [ 17.584350] input: PC Speaker as /devices/platform/pcspkr/input/input1 [ 17.584726] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 17.597591] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 17.597607] ACPI: Power Button [PWRB] [ 17.597799] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3 [ 17.597812] ACPI: Sleep Button [SLPB] [ 17.598013] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 17.598021] ACPI: Power Button [PWRF] [ 17.649311] parport_pc 00:0b: reported by Plug and Play ACPI [ 17.649382] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 17.705060] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 17.845303] [drm] Initialized drm 1.1.0 20060810 [ 17.930305] nouveau 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 17.945521] [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x011000b2) [ 17.945724] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM [ 18.067837] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 18.068204] [drm] nouveau 0000:01:00.0: BMP BIOS found [ 18.068208] [drm] nouveau 0000:01:00.0: BMP version 5.20 [ 18.068215] [drm] nouveau 0000:01:00.0: Bios version 03.11.01.30 [ 18.068221] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 1.4 [ 18.068226] [drm] nouveau 0000:01:00.0: No useful information in BIOS output table; adding all possible outputs [ 18.068232] [drm] nouveau 0000:01:00.0: Probing TV encoders on I2C bus: 1 [ 18.191985] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 18.192214] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 18.196302] [drm] nouveau 0000:01:00.0: No TV encoders found. [ 18.196613] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xAB7E [ 18.196633] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xB26C [ 18.196644] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xAB99 [ 18.196668] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xB213 [ 18.196682] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xAC2C [ 18.196688] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xAD80 [ 18.196711] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xAC51 [ 18.196740] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 7 at offset 0xAD1B [ 18.210944] [TTM] Zone kernel: Available graphics memory: 257330 kiB. [ 18.210969] [drm] nouveau 0000:01:00.0: 64 MiB VRAM [ 18.211098] agpgart-via 0000:00:00.0: AGP 2.0 bridge [ 18.211120] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode [ 18.211176] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode [ 18.211183] [drm] nouveau 0000:01:00.0: 128 MiB GART (aperture) [ 18.211501] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0 [ 18.213471] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0 [ 18.213946] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0 [ 18.213959] [drm] nouveau 0000:01:00.0: Saving VGA fonts [ 18.251572] [drm] nouveau 0000:01:00.0: Detected a VGA connector [ 18.251949] [drm] nouveau 0000:01:00.0: Detected a DVI-D connector [ 18.252969] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 18.252976] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1) [ 18.310160] No connectors reported connected with modes [ 18.310183] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 [ 19.078154] Adding 874488k swap on /dev/sda5. Priority:-1 extents:1 across:874488k [ 19.414115] loop: module loaded [ 20.160510] fuse init (API version 7.13) [ 21.192179] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 21.893758] lp0: using parport0 (interrupt-driven). [ 21.919663] ppdev: user-space parallel port driver [ 31.504040] eth0: no IPv6 routers present
signature.asc
Description: This is a digitally signed message part
