Package: debian-31r0a-i386 installation-reports
Debian-installer-version: debian-31r0a-i386-netinst.iso
uname -a: Linux ins 2.4.27-2-686 #1 Mon May 16 17:03:22
JST 2005 i686 GNU/Linux
Date: Aug. 9, 2005
Method: network install http://ftp.jp.debian.org
The installer was booted from floppies from the
net install cdrom
Machine:
Processor: Pentium III (500 MHz)
Memory: 192 MB
Root Device: /dev/hda
# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/hda2 3075536 348640 2570664 12% /
/dev/hda1 180639 9820 161182 6% /boot
/dev/hda5 3367972 85128 3111756 3% /home
/dev/hda3 7305448 103504 6830844 2% /var
Output of lspci and lspci -n:
# lspci
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
(rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
(rev 03)
0000:00:04.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:04.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:04.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:04.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:00:0b.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev
08)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP
1X/2X (rev 5c)
# lspci -n
0000:00:00.0 0600: 8086:7190 (rev 03)
0000:00:01.0 0604: 8086:7191 (rev 03)
0000:00:04.0 0601: 8086:7110 (rev 02)
0000:00:04.1 0101: 8086:7111 (rev 01)
0000:00:04.2 0c03: 8086:7112 (rev 01)
0000:00:04.3 0680: 8086:7113 (rev 02)
0000:00:0b.0 0200: 8086:1229 (rev 08)
0000:01:00.0 0300: 1002:4742 (rev 5c)
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [-] (no cd drive)
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [E]
Reboot: [O]
Comments/Problems:
First, the machine has 2 ide drives: I tried to install
debian sarge to the master drive. In the slave drive,
the old Linux system (Slackware 4.x ?) had been installed,
and worked in the machine as a master drive. I needed
the drive to pick up the contents into the new system.
At the step of grub install, the installer hunged as if
it could not determine the correct system to start up.
Finaly, I detached the drive, and the installer successfully
installed the grub to boot the new system.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
