Package: linux-image-2.6.32-5-686 --- Please enter the report below this line. --- Kernel update was performed while running linux-image-2.6.32-3-686. It is likely that running grub update under linux-image-2.6.32-5-686 kernel will replace root=/dev/hda1 by root=/dev/sda1 b(maybe I need to try) but this will kill the old kernel. Please advice if I can provide any additional information.
Cheers, Abou Al Montacir --- System information. --- Architecture: i386 Kernel: Linux 2.6.32-5-686 Debian Release: squeeze/sid 500 unstable ftp.fr.debian.org --- Package information. --- Depends (Version) | Installed =======================================-+-=============== module-init-tools | 3.12~pre2-3 linux-base (>= 2.6.32-12) | 2.6.32-12 initramfs-tools (>= 0.55) | 0.94.4 OR linux-initramfs-tool | Package Status (Version) | Installed =====================================-+-=========== firmware-bnx2 | firmware-bnx2x | firmware-ipw2x00 | firmware-ivtv | firmware-iwlwifi | firmware-linux | firmware-linux-nonfree | firmware-qlogic | firmware-ralink | xen-hypervisor | Recommends (Version) | Installed ===================================-+-============ firmware-linux-free (>= 2.6.32) | 2.6.32-12 libc6-i686 | 2.10.2-8 Suggests (Version) | Installed ===============================-+-=========== linux-doc-2.6.32 | grub | 0.97-61 OR lilo | -8<---8<---8<---8<---8<---8<---8<---8<---8<-- Please attach the file: /tmp/reportbug-ng-linux-image-2.6.32-5-686-ysB1WB.txt to the mail. I'd do it myself if the output wasn't too long to handle. Thank you! ->8--->8--->8--->8--->8--->8--->8--->8--->8--
--- Output from package bug script --- ** Version: Linux version 2.6.32-5-686 (Debian 2.6.32-12) (b...@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-10) ) #1 SMP Sat May 1 04:16:37 UTC 2010 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=/dev/sda1 ro quiet ** Not tainted ** Kernel log: [ 4.827507] ACPI: Power Button [PWRF] [ 4.827991] ACPI: Invalid PBLK length [5] [ 4.828716] processor LNXCPU:00: registered as cooling_device0 [ 4.845502] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 4.891654] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 5.033991] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.054895] parport_pc 00:09: reported by Plug and Play ACPI [ 5.054958] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 5.060815] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5.074277] intel_rng: FWH not detected [ 5.093571] udev: renamed network interface eth1 to eth0 [ 5.106511] gameport: NS558 PnP Gameport is pnp00:0e/gameport0, io 0x200, speed 784kHz [ 5.142312] udev: renamed network interface eth0_rename to eth1 [ 5.279495] [drm] Initialized drm 1.1.0 20060810 [ 5.416541] input: PS2++ Logitech MX Mouse as /devices/platform/i8042/serio1/input/input4 [ 5.522736] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.527005] [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x011000a1) [ 5.527139] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM [ 5.678511] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 5.678718] [drm] nouveau 0000:01:00.0: BMP BIOS found [ 5.678721] [drm] nouveau 0000:01:00.0: BMP version 5.17 [ 5.678725] [drm] nouveau 0000:01:00.0: Bios version 03.11.00.18 [ 5.678729] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 1.1 [ 5.678732] [drm] nouveau 0000:01:00.0: No useful information in BIOS output table; adding all possible outputs [ 5.678735] [drm] nouveau 0000:01:00.0: Probing TV encoders on I2C bus: 1 [ 5.683557] [drm] nouveau 0000:01:00.0: No TV encoders found. [ 5.683733] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x07FE [ 5.683750] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x0EA7 [ 5.683757] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x0819 [ 5.683774] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x0E4E [ 5.683784] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x08AC [ 5.683789] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0x09BB [ 5.683810] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0x08DA [ 5.683830] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 7 at offset 0x0956 [ 5.694186] [TTM] Zone kernel: Available graphics memory: 445618 kiB. [ 5.694190] [TTM] Zone highmem: Available graphics memory: 517262 kiB. [ 5.694206] [drm] nouveau 0000:01:00.0: 32 MiB VRAM [ 5.694290] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 5.694311] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode [ 5.694348] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode [ 5.694365] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture) [ 5.694599] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0 [ 5.695109] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0 [ 5.695245] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0 [ 5.695257] [drm] nouveau 0000:01:00.0: Saving VGA fonts [ 5.740653] [drm] nouveau 0000:01:00.0: Detected a VGA connector [ 5.740877] [drm] nouveau 0000:01:00.0: Detected a DVI-D connector [ 5.742043] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 5.742047] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1) [ 5.940663] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo f6fc2e00 [ 5.952242] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [ 5.952248] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output @ [ 5.954261] Console: switching to colour frame buffer device 160x64 [ 5.956410] fb0: nouveaufb frame buffer device [ 5.956412] registered panic notifier [ 5.956420] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 [ 6.403921] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 6.403965] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 6.828031] intel8x0_measure_ac97_clock: measured 55634 usecs (2680 samples) [ 6.828036] intel8x0: clocking to 48000 [ 7.884918] Adding 2000052k swap on /dev/sda5. Priority:-1 extents:1 across:2000052k [ 8.351089] EXT3 FS on sda1, internal journal [ 9.862376] kjournald starting. Commit interval 5 seconds [ 9.862539] EXT3 FS on sda6, internal journal [ 9.862545] EXT3-fs: mounted filesystem with ordered data mode. [ 9.921991] kjournald starting. Commit interval 5 seconds [ 9.922149] EXT3 FS on sda7, internal journal [ 9.922156] EXT3-fs: mounted filesystem with ordered data mode. [ 10.029824] kjournald starting. Commit interval 5 seconds [ 10.029984] EXT3 FS on sda8, internal journal [ 10.029991] EXT3-fs: mounted filesystem with ordered data mode. [ 11.688656] fuse init (API version 7.13) [ 21.002912] apm: BIOS not found. [ 37.547025] Bluetooth: Core ver 2.15 [ 37.547106] NET: Registered protocol family 31 [ 37.547109] Bluetooth: HCI device and connection manager initialized [ 37.547112] Bluetooth: HCI socket layer initialized [ 37.613595] Bluetooth: L2CAP ver 2.14 [ 37.613599] Bluetooth: L2CAP socket layer initialized [ 37.620648] Bluetooth: RFCOMM TTY layer initialized [ 37.620655] Bluetooth: RFCOMM socket layer initialized [ 37.620659] Bluetooth: RFCOMM ver 1.11 [ 37.723867] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 37.723872] Bluetooth: BNEP filters: protocol multicast [ 37.789673] Bridge firewalling registered [ 37.836811] Bluetooth: SCO (Voice Link) ver 0.6 [ 37.836815] Bluetooth: SCO socket layer initialized [ 40.824391] lp0: using parport0 (interrupt-driven). [ 40.867672] ppdev: user-space parallel port driver [ 40.899007] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 43.816165] b44: eth0: Link is up at 100 Mbps, full duplex. [ 43.816170] b44: eth0: Flow control is off for TX and off for RX. [ 43.816410] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 43.984756] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0) [ 45.031444] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [ 50.976019] eth1: no IPv6 routers present [ 54.792013] eth0: no IPv6 routers present [ 63.680048] end_request: I/O error, dev fd0, sector 0 [ 63.712030] end_request: I/O error, dev fd0, sector 0 [ 729.932765] udev: starting version 154 ** Model information not available ** Loaded modules: Module Size Used by ppdev 4058 0 lp 5570 0 sco 5857 2 bridge 32851 0 stp 996 1 bridge bnep 7376 2 rfcomm 25099 0 l2cap 21705 6 bnep,rfcomm crc16 1027 1 l2cap bluetooth 36259 6 sco,bnep,rfcomm,l2cap rfkill 10196 3 bluetooth speedstep_lib 2468 0 cpufreq_conservative 4018 0 cpufreq_powersave 602 0 cpufreq_userspace 1444 0 cpufreq_stats 1940 0 binfmt_misc 4875 1 fuse 43554 1 asb100 8736 0 hwmon_vid 1528 1 asb100 snd_intel8x0 19523 0 snd_ac97_codec 79148 1 snd_intel8x0 ac97_bus 710 1 snd_ac97_codec snd_pcm_oss 28671 0 snd_mixer_oss 10461 1 snd_pcm_oss snd_pcm 47214 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_seq_midi 3576 0 snd_rawmidi 12505 1 snd_seq_midi snd_seq_midi_event 3684 1 snd_seq_midi snd_seq 35327 2 snd_seq_midi,snd_seq_midi_event snd_timer 12258 2 snd_pcm,snd_seq snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq nouveau 314504 2 ttm 33142 1 nouveau snd 34327 9 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device drm_kms_helper 18269 1 nouveau drm 111816 3 nouveau,ttm,drm_kms_helper i2c_algo_bit 3497 1 nouveau i2c_i801 6462 0 parport_pc 15799 1 rng_core 2178 0 parport 22554 3 ppdev,lp,parport_pc soundcore 3450 1 snd shpchp 21220 0 tpm_tis 5496 0 ns558 1599 0 psmouse 44389 0 i2c_core 12612 6 asb100,nouveau,drm_kms_helper,drm,i2c_algo_bit,i2c_i801 pcspkr 1207 0 tpm 8137 1 tpm_tis gameport 6025 2 ns558 tpm_bios 3569 1 tpm evdev 5609 10 snd_page_alloc 4977 2 snd_intel8x0,snd_pcm pci_hotplug 18065 1 shpchp serio_raw 2916 0 button 3598 1 nouveau processor 26531 0 ext3 93832 4 jbd 31965 1 ext3 mbcache 3762 1 ext3 sg 15936 0 sd_mod 25797 6 crc_t10dif 1012 1 sd_mod sr_mod 10770 0 cdrom 26487 1 sr_mod b44 18352 0 ata_generic 2019 0 ssb 33502 1 b44 ata_piix 17608 5 uhci_hcd 15989 0 mmc_core 38095 1 ssb pcmcia 17442 1 ssb libata 115081 2 ata_generic,ata_piix firewire_ohci 16477 0 ne2k_pci 4939 0 thermal 9206 0 pcmcia_core 20414 2 ssb,pcmcia ehci_hcd 27386 0 floppy 40923 0 scsi_mod 101133 4 sg,sd_mod,sr_mod,libata thermal_sys 9378 2 processor,thermal 8390 5544 1 ne2k_pci firewire_core 31007 1 firewire_ohci crc_itu_t 1035 1 firewire_core mii 2714 1 b44 usbcore 98094 3 uhci_hcd,ehci_hcd nls_base 4541 1 usbcore
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 40703290-bd17-4353-89cc-58f6c45b5b43
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 40703290-bd17-4353-89cc-58f6c45b5b43
set locale_dir=($root)/boot/grub/locale
set lang=fr
insmod gettext
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 40703290-bd17-4353-89cc-58f6c45b5b43
insmod png
if background_image /boot/grub/moreblue-orbit-grub.png ; then
set color_normal=black/black
set color_highlight=magenta/black
else
set menu_color_normal=cyan/blue
set menu_color_highlight=white/blue
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Debian GNU/Linux, with Linux 2.6.32-5-686" --class debian --class
gnu-linux --class gnu --class os {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 40703290-bd17-4353-89cc-58f6c45b5b43
echo Loading Linux 2.6.32-5-686 ...
linux /boot/vmlinuz-2.6.32-5-686 root=/dev/hda1 ro quiet
echo Loading initial ramdisk ...
initrd /boot/initrd.img-2.6.32-5-686
}
menuentry "Debian GNU/Linux, with Linux 2.6.32-5-686 (recovery mode)" --class
debian --class gnu-linux --class gnu --class os {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 40703290-bd17-4353-89cc-58f6c45b5b43
echo Loading Linux 2.6.32-5-686 ...
linux /boot/vmlinuz-2.6.32-5-686 root=/dev/hda1 ro single
echo Loading initial ramdisk ...
initrd /boot/initrd.img-2.6.32-5-686
}
menuentry "Debian GNU/Linux, with Linux 2.6.32-3-686" --class debian --class
gnu-linux --class gnu --class os {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 40703290-bd17-4353-89cc-58f6c45b5b43
echo Loading Linux 2.6.32-3-686 ...
linux /boot/vmlinuz-2.6.32-3-686 root=/dev/hda1 ro quiet
echo Loading initial ramdisk ...
initrd /boot/initrd.img-2.6.32-3-686
}
menuentry "Debian GNU/Linux, with Linux 2.6.32-3-686 (recovery mode)" --class
debian --class gnu-linux --class gnu --class os {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 40703290-bd17-4353-89cc-58f6c45b5b43
echo Loading Linux 2.6.32-3-686 ...
linux /boot/vmlinuz-2.6.32-3-686 root=/dev/hda1 ro single
echo Loading initial ramdisk ...
initrd /boot/initrd.img-2.6.32-3-686
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
# /dev/hda1 / ext3 errors=remount-ro 0 1
UUID=40703290-bd17-4353-89cc-58f6c45b5b43 / ext3
errors=remount-ro 0 1
# /dev/hda5 none swap sw 0 0
UUID=9b8dd54b-df83-49be-8215-e5d787b381a3 none swap sw
0 0
proc /proc proc defaults 0 0
# /dev/hda6 /home ext3 defaults 0 2
UUID=e0870e14-9544-4cb7-9671-c1387794fb97 /home ext3
defaults 0 2
# /dev/hda7 /usr/local ext3 defaults 0 2
UUID=8737ab3f-bf8d-48ab-855c-4fbb5f22ec0d /usr/local ext3
defaults 0 2
# /dev/hda8 /mnt/data ext3 defaults 0 2
UUID=57977736-c38a-4fb6-974c-fc21c4d7b1ab /mnt/data ext3
defaults 0 2
#/dev/cdrom1 /media/cdrom iso9660 ro,user,noauto 0 0
#/dev/fd0 /media/floppy auto user,noauto 0 0
#/dev/sda1 /media/cle vfat user,noauto 0 0
signature.asc
Description: Ceci est une partie de message numériquement signée
