Package: xserver-xorg-core Version: 2:1.7.6-2 Severity: normal Hello,
I have x11_options configured for synaptics in /etc/udev/rules.d. After upgrade of this package those options don't work any more. I can confirm that 'x11_options' was left behind after checking debian patches in your git: http://git.debian.org/?p=pkg-xorg/xserver/xorg-server.git;a=blob;f=debian/patches/10-config-libudev-backend.diff;h=dd3137eeb5e6dee720c33cfe369dc17821fe3320;hb=6fffcdd564dde6db49707999037207888a6aa172 http://git.debian.org/?p=pkg-xorg/xserver/xorg-server.git;a=blob;f=debian/patches/15-keep-udev-x11-driver.diff;h=7aa8c0af1737d7b37ee6d9d04e924a82a989ca27;hb=6fffcdd564dde6db49707999037207888a6aa172 Would you please fix it? Thanks -- Package-specific info: /var/lib/x11/X.roster does not exist. /var/lib/x11/X.md5sum does not exist. X server symlink status: lrwxrwxrwx 1 root root 13 Jun 25 2009 /etc/X11/X -> /usr/bin/Xorg -rwxr-xr-x 1 root root 1722172 Apr 6 01:16 /usr/bin/Xorg /var/lib/x11/xorg.conf.roster does not exist. VGA-compatible devices on PCI bus: 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) /var/lib/x11/xorg.conf.md5sum does not exist. Xorg X server configuration file status: -rw-r--r-- 1 root root 1621 Jun 26 2009 /etc/X11/xorg.conf Contents of /etc/X11/xorg.conf: # xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg #Section "InputDevice" # Identifier "Generic Keyboard" # Driver "kbd" # Option "XkbRules" "xorg" # Option "XkbModel" "pc104" # Option "XkbLayout" "us" #EndSection # #Section "InputDevice" # Identifier "Configured Mouse" # Driver "mouse" #EndSection # ##Section "InputDevice" ## Identifier "touchpad" ## Driver "synaptics" ## Option "UpDownScrolling" "true" ## Option "VertEdgeScroll" "true" ##EndSection # # Section "Monitor" Identifier "TV" Option "Ignore" "True" EndSection Section "Device" Identifier "Configured Video Device" Driver "intel" Option "monitor-TV" "TV" Option "monitor-LVDS" "Configured Monitor" #Option "AccelMethod" "UXA" Option "Tiling" "false" EndSection ## Section "Monitor" Identifier "Configured Monitor" EndSection # #Section "Screen" # Identifier "Default Screen" # Monitor "Configured Monitor" #EndSection Section "ServerFlags" Option "DontZap" "off" EndSection Xorg X server log files on system: -rw-r--r-- 1 root root 30282 Sep 30 2009 /var/log/Xorg.20.log -rw-r--r-- 1 root root 28310 Mar 29 17:14 /var/log/Xorg.1.log -rw-r--r-- 1 root root 28863 Apr 7 19:46 /var/log/Xorg.0.log Contents of most recent Xorg X server log file /var/log/Xorg.0.log: X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.32.11-dsa-ia32 i686 Debian Current Operating System: Linux wwang29-mobl1 2.6.33.1 #1 SMP PREEMPT Mon Mar 29 14:29:24 CST 2010 i686 Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.33.1 root=/dev/hda2 ro acpi_os_name=Microsoft Windows quiet Build Date: 05 April 2010 05:10:30PM xorg-server 2:1.7.6-2 (Timo Aaltonen <tjaal...@ubuntu.com>) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 7 17:00:43 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) No Layout section. Using the first Screen section. (==) No screen section available. Using defaults. (**) |-->Screen "Default Screen Section" (0) (**) | |-->Monitor "<default monitor>" (==) No device specified for screen "Default Screen Section". Using the first device section listed. (**) | |-->Device "Configured Video Device" (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. (**) Option "DontZap" "off" (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to "/usr/lib/xorg/modules" (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. (II) Loader magic: 0x81eb080 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (++) using VT number 7 (--) PCI:*(0:0:2:0) 8086:2a02:103c:30c9 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xe0400000/1048576, 0xd0000000/268435456, I/O @ 0x00002000/8 (--) PCI: (0:0:2:1) 8086:2a03:103c:30c9 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xe0500000/1048576 (II) Open ACPI successful (/var/run/acpid.socket) (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension SELinux (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.7.5.902, module version = 2.9.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale (II) Primary Device is: PCI 0...@00:02:0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: drmOpenMinor returns 9 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (**) intel(0): Option "Tiling" "false" (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM (--) intel(0): Chipset: "965GM" (II) intel(0): Output VGA1 has no monitor section (II) intel(0): Output LVDS1 has no monitor section (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0 (II) intel(0): Output TV1 has no monitor section (II) intel(0): EDID for output VGA1 (II) intel(0): EDID for output LVDS1 (II) intel(0): Manufacturer: SEC Model: 4541 Serial#: 0 (II) intel(0): Year: 2007 Week: 0 (II) intel(0): EDID Version: 1.3 (II) intel(0): Digital Display Input (II) intel(0): Max Image Size [cm]: horiz.: 26 vert.: 16 (II) intel(0): Gamma: 2.20 (II) intel(0): No DPMS capabilities specified (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 (II) intel(0): First detailed timing is preferred mode (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550 (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329 (II) intel(0): Manufacturer's mask: 0 (II) intel(0): Supported detailed timing: (II) intel(0): clock: 69.3 MHz Image Size: 261 x 163 mm (II) intel(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1415 h_border: 0 (II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0 (II) intel(0): Unknown vendor-specific block f (II) intel(0): SAMSUNG (II) intel(0): LTN121W3-L01 (II) intel(0): EDID (in hex): (II) intel(0): 00ffffffffffff004ca3414500000000 (II) intel(0): 00110103801a10780a87f594574f8c27 (II) intel(0): 27505400000001010101010101010101 (II) intel(0): 010101010101121b0087502010301030 (II) intel(0): 130005a3100000190000000f00000000 (II) intel(0): 00000000002387026401000000fe0053 (II) intel(0): 414d53554e470a2020202020000000fe (II) intel(0): 004c544e31323157332d4c30310a00b0 (II) intel(0): Not using default mode "320x175" (doublescan mode not supported) (II) intel(0): Not using default mode "320x200" (doublescan mode not supported) (II) intel(0): Not using default mode "360x200" (doublescan mode not supported) (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "1024x768" (interlace mode not supported) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions) (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions) (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions) (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions) (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions) (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions) (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) (II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions) (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) (II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions) (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) (II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions) (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions) (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions) (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) (II) intel(0): Not using default mode "416x312" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking) (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) (II) intel(0): Not using default mode "1360x768" (exceeds panel dimensions) (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1440x900" (exceeds panel dimensions) (II) intel(0): Not using default mode "720x450" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1024" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x512" (doublescan mode not supported) (II) intel(0): Not using default mode "1680x1050" (monitor doesn't support reduced blanking) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1080" (monitor doesn't support reduced blanking) (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1200" (monitor doesn't support reduced blanking) (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions) (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions) (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions) (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions) (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) (II) intel(0): Printing probed modes for output LVDS1 (II) intel(0): Modeline "1280x800"x60.0 69.30 1280 1296 1344 1415 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz) (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz) (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz) (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz) (II) intel(0): EDID for output TV1 (II) intel(0): Output VGA1 disconnected (II) intel(0): Output LVDS1 connected (II) intel(0): Output TV1 disconnected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output LVDS1 using initial mode 1280x800 (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (==) Depth 24 pixmap format is 32 bpp (II) intel(0): [DRI2] Setup complete (**) intel(0): Framebuffer compression disabled (**) intel(0): Tiling disabled (**) intel(0): SwapBuffers wait enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with untiled buffers. (II) intel(0): Untiled allocation successful. (II) UXA(0): Driver registered support for the following operations: (II) solid (II) copy (II) composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): No memory allocations (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (==) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up textured video (II) intel(0): Set up overlay video (II) intel(0): direct rendering: DRI2 Enabled (WW) intel(0): Option "monitor-TV" is not used (WW) intel(0): Option "monitor-LVDS" is not used (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE SELinux: Disabled on system, not enabling in X server (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_make_current_read (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so (II) GLX: Initialized DRI2 GL provider for screen 0 (II) intel(0): Setting screen physical size to 338 x 211 (II) config/udev: Adding input device Power Button (/dev/input/event2) (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.7.5, module version = 2.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event2" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (**) Option "xkb_options" "lv3:ralt_switch" (II) config/udev: Adding input device Video Bus (/dev/input/event3) (**) Video Bus: always reports core events (**) Video Bus: Device: "/dev/input/event3" (II) Video Bus: Found keys (II) Video Bus: Configuring as keyboard (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (**) Option "xkb_options" "lv3:ralt_switch" (II) config/udev: Adding input device Lid Switch (/dev/input/event1) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device Sleep Button (/dev/input/event0) (**) Sleep Button: always reports core events (**) Sleep Button: Device: "/dev/input/event0" (II) Sleep Button: Found keys (II) Sleep Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (**) Option "xkb_options" "lv3:ralt_switch" (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event9) (**) Logitech USB Receiver: always reports core events (**) Logitech USB Receiver: Device: "/dev/input/event9" (II) Logitech USB Receiver: Found 20 mouse buttons (II) Logitech USB Receiver: Found scroll wheel(s) (II) Logitech USB Receiver: Found relative axes (II) Logitech USB Receiver: Found x and y relative axes (II) Logitech USB Receiver: Configuring as mouse (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5 (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE) (II) Logitech USB Receiver: initialized for relative axes. (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse2) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event10) (**) Logitech USB Receiver: always reports core events (**) Logitech USB Receiver: Device: "/dev/input/event10" (II) Logitech USB Receiver: Found 1 mouse buttons (II) Logitech USB Receiver: Found scroll wheel(s) (II) Logitech USB Receiver: Found relative axes (II) Logitech USB Receiver: Found absolute axes (II) Logitech USB Receiver: Found keys (II) Logitech USB Receiver: Configuring as mouse (II) Logitech USB Receiver: Configuring as keyboard (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5 (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (**) Option "xkb_options" "lv3:ralt_switch" (EE) Logitech USB Receiver: failed to initialize for relative axes. (II) Logitech USB Receiver: initialized for absolute axes. (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4) (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event4" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (**) Option "xkb_options" "lv3:ralt_switch" (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event5) (**) PS/2 Generic Mouse: always reports core events (**) PS/2 Generic Mouse: Device: "/dev/input/event5" (II) PS/2 Generic Mouse: Found 3 mouse buttons (II) PS/2 Generic Mouse: Found relative axes (II) PS/2 Generic Mouse: Found x and y relative axes (II) PS/2 Generic Mouse: Configuring as mouse (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5 (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE) (II) PS/2 Generic Mouse: initialized for relative axes. (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6) (II) LoadModule: "synaptics" (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so (II) Module synaptics: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 1.2.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (II) Synaptics touchpad driver version 1.2.1 (**) Option "Device" "/dev/input/event6" (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255 (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0 (II) SynPS/2 Synaptics TouchPad: buttons: left right double triple (--) SynPS/2 Synaptics TouchPad: touchpad found (**) SynPS/2 Synaptics TouchPad: always reports core events (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD) (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0 (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 (--) SynPS/2 Synaptics TouchPad: touchpad found (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event7) (**) HP WMI hotkeys: always reports core events (**) HP WMI hotkeys: Device: "/dev/input/event7" (II) HP WMI hotkeys: Found keys (II) HP WMI hotkeys: Configuring as keyboard (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (**) Option "xkb_options" "lv3:ralt_switch" (II) intel(0): EDID vendor "SEC", prod id 17729 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1296 1344 1415 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): EDID vendor "SEC", prod id 17729 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1296 1344 1415 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): EDID vendor "SEC", prod id 17729 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1296 1344 1415 800 801 804 816 -hsync -vsync (49.0 kHz) (II) AIGLX: Suspending AIGLX clients for VT switch (II) Open ACPI successful (/var/run/acpid.socket) (II) AIGLX: Resuming AIGLX clients after VT switch (II) intel(0): No memory allocations (II) intel(0): EDID vendor "SEC", prod id 17729 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1296 1344 1415 800 801 804 816 -hsync -vsync (49.0 kHz) (--) SynPS/2 Synaptics TouchPad: touchpad found (II) Power Button: Device reopened after 1 attempts. (II) Video Bus: Device reopened after 1 attempts. (II) Sleep Button: Device reopened after 1 attempts. (II) Logitech USB Receiver: Device reopened after 1 attempts. (II) Logitech USB Receiver: Device reopened after 1 attempts. (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) PS/2 Generic Mouse: Device reopened after 1 attempts. (II) HP WMI hotkeys: Device reopened after 1 attempts. udev information: P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0 N: input/event0 S: char/13:64 E: UDEV_LOG=3 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0 E: MAJOR=13 E: MINOR=64 E: DEVNAME=/dev/input/event0 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: XKBMODEL=pc105 E: XKBLAYOUT=us E: DEVLINKS=/dev/char/13:64 E: XKBOPTIONS=lv3:ralt_switch E: x11_driver=evdev P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1/event1 N: input/event1 S: char/13:65 E: UDEV_LOG=3 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1/event1 E: MAJOR=13 E: MINOR=65 E: DEVNAME=/dev/input/event1 E: SUBSYSTEM=input E: ID_INPUT=1 E: DEVLINKS=/dev/char/13:65 P: /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.1/input/input10/event10 N: input/event10 S: char/13:74 S: input/by-id/usb-Logitech_USB_Receiver-event-if01 S: input/by-path/pci-0000:00:1d.2-usb-0:2:1.1-event E: UDEV_LOG=3 E: DEVPATH=/devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.1/input/input10/event10 E: MAJOR=13 E: MINOR=74 E: DEVNAME=/dev/input/event10 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_VENDOR=Logitech E: ID_VENDOR_ENC=Logitech E: ID_VENDOR_ID=046d E: ID_MODEL=USB_Receiver E: ID_MODEL_ENC=USB\x20Receiver E: ID_MODEL_ID=c526 E: ID_REVISION=0500 E: ID_SERIAL=Logitech_USB_Receiver E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030102:030000: E: ID_USB_INTERFACE_NUM=01 E: ID_USB_DRIVER=usbhid E: ID_PATH=pci-0000:00:1d.2-usb-0:2:1.1 E: XKBMODEL=pc105 E: XKBLAYOUT=us E: DEVLINKS=/dev/char/13:74 /dev/input/by-id/usb-Logitech_USB_Receiver-event-if01 /dev/input/by-path/pci-0000:00:1d.2-usb-0:2:1.1-event E: XKBOPTIONS=lv3:ralt_switch E: x11_driver=evdev P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2 N: input/event2 S: char/13:66 E: UDEV_LOG=3 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2 E: MAJOR=13 E: MINOR=66 E: DEVNAME=/dev/input/event2 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: XKBMODEL=pc105 E: XKBLAYOUT=us E: DEVLINKS=/dev/char/13:66 E: XKBOPTIONS=lv3:ralt_switch E: x11_driver=evdev P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3 N: input/event3 S: char/13:67 E: UDEV_LOG=3 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3 E: MAJOR=13 E: MINOR=67 E: DEVNAME=/dev/input/event3 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: XKBMODEL=pc105 E: XKBLAYOUT=us E: DEVLINKS=/dev/char/13:67 E: XKBOPTIONS=lv3:ralt_switch E: x11_driver=evdev P: /devices/platform/i8042/serio0/input/input4/event4 N: input/event4 S: char/13:68 S: input/by-path/platform-i8042-serio-0-event-kbd E: UDEV_LOG=3 E: DEVPATH=/devices/platform/i8042/serio0/input/input4/event4 E: MAJOR=13 E: MINOR=68 E: DEVNAME=/dev/input/event4 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_SERIAL=noserial E: ID_PATH=platform-i8042-serio-0 E: XKBMODEL=pc105 E: XKBLAYOUT=us E: DEVLINKS=/dev/char/13:68 /dev/input/by-path/platform-i8042-serio-0-event-kbd E: XKBOPTIONS=lv3:ralt_switch E: x11_driver=evdev P: /devices/platform/i8042/serio1/input/input5/event5 N: input/event5 S: char/13:69 S: input/by-path/platform-i8042-serio-1-event-mouse E: UDEV_LOG=3 E: DEVPATH=/devices/platform/i8042/serio1/input/input5/event5 E: MAJOR=13 E: MINOR=69 E: DEVNAME=/dev/input/event5 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_SERIAL=noserial E: ID_PATH=platform-i8042-serio-1 E: x11_driver=evdev E: DEVLINKS=/dev/char/13:69 /dev/input/by-path/platform-i8042-serio-1-event-mouse P: /devices/platform/i8042/serio4/input/input6/event6 N: input/event6 S: char/13:70 S: input/by-path/platform-i8042-serio-4-event-mouse E: UDEV_LOG=3 E: DEVPATH=/devices/platform/i8042/serio4/input/input6/event6 E: MAJOR=13 E: MINOR=70 E: DEVNAME=/dev/input/event6 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_SERIAL=noserial E: ID_PATH=platform-i8042-serio-4 E: x11_driver=synaptics E: x11_options.VertEdgeScroll=true E: x11_options.TapButton1=1 E: DEVLINKS=/dev/char/13:70 /dev/input/by-path/platform-i8042-serio-4-event-mouse P: /devices/virtual/input/input7/event7 N: input/event7 S: char/13:71 E: UDEV_LOG=3 E: DEVPATH=/devices/virtual/input/input7/event7 E: MAJOR=13 E: MINOR=71 E: DEVNAME=/dev/input/event7 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: XKBMODEL=pc105 E: XKBLAYOUT=us E: DEVLINKS=/dev/char/13:71 E: XKBOPTIONS=lv3:ralt_switch E: x11_driver=evdev P: /devices/pci0000:00/0000:00:1b.0/input/input8/event8 N: input/event8 S: char/13:72 E: UDEV_LOG=3 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input8/event8 E: MAJOR=13 E: MINOR=72 E: DEVNAME=/dev/input/event8 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: DEVLINKS=/dev/char/13:72 P: /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input9/event9 N: input/event9 S: char/13:73 S: input/by-id/usb-Logitech_USB_Receiver-event-mouse S: input/by-path/pci-0000:00:1d.2-usb-0:2:1.0-event-mouse E: UDEV_LOG=3 E: DEVPATH=/devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input9/event9 E: MAJOR=13 E: MINOR=73 E: DEVNAME=/dev/input/event9 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_VENDOR=Logitech E: ID_VENDOR_ENC=Logitech E: ID_VENDOR_ID=046d E: ID_MODEL=USB_Receiver E: ID_MODEL_ENC=USB\x20Receiver E: ID_MODEL_ID=c526 E: ID_REVISION=0500 E: ID_SERIAL=Logitech_USB_Receiver E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030102:030000: E: ID_USB_INTERFACE_NUM=00 E: ID_USB_DRIVER=usbhid E: ID_PATH=pci-0000:00:1d.2-usb-0:2:1.0 E: x11_driver=evdev E: DEVLINKS=/dev/char/13:73 /dev/input/by-id/usb-Logitech_USB_Receiver-event-mouse /dev/input/by-path/pci-0000:00:1d.2-usb-0:2:1.0-event-mouse DRM Information from dmesg: [ 0.507503] Linux agpgart interface v0.103 [ 0.507526] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 0.508488] agpgart-intel 0000:00:00.0: detected 7676K stolen memory [ 0.515221] PM: Adding info for No Bus:agpgart [ 0.515646] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.515788] [drm] Initialized drm 1.1.0 20060810 [ 0.522681] [drm] set up 7M of stolen space [ 0.647983] [drm] initialized overlay support [ 1.312252] fbcon: inteldrmfb (fb0) is primary device [ 1.451886] fb0: inteldrmfb frame buffer device [ 1.459010] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1624.364240] agpgart-intel 0000:00:00.0: preparing suspend [ 1625.127631] drm card0-SVIDEO-1: legacy class suspend [ 1625.127636] drm card0-LVDS-1: legacy class suspend [ 1625.127652] drm card0-VGA-1: legacy class suspend [ 1625.127658] drm card0: legacy class suspend [ 1625.127662] drm controlD64: legacy class suspend [ 1625.364113] agpgart-intel 0000:00:00.0: suspend [ 1625.412211] agpgart-intel 0000:00:00.0: LATE suspend [ 1628.138259] agpgart-intel 0000:00:00.0: EARLY resume [ 1628.247538] agpgart-intel 0000:00:00.0: resume [ 1628.707972] drm controlD64: legacy class resume [ 1628.707976] drm card0: legacy class resume [ 1628.707983] drm card0-VGA-1: legacy class resume [ 1628.707991] drm card0-LVDS-1: legacy class resume [ 1628.707994] drm card0-SVIDEO-1: legacy class resume [ 1630.844692] agpgart-intel 0000:00:00.0: completing resume -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.33.1 (SMP w/2 CPU cores; PREEMPT) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages xserver-xorg-core depends on: ii keyboard-configuration 1.54 system-wide keyboard preferences ii libaudit0 1.7.13-1+b1 Dynamic library for security audit ii libc6 2.10.2-6 Embedded GNU C Library: Shared lib ii libdrm2 2.4.18-3 Userspace interface to kernel DRM ii libgcrypt11 1.4.5-2 LGPL Crypto library - runtime libr ii libpciaccess0 0.11.0-2 Generic PCI access library for X ii libpixman-1-0 0.16.4-1 pixel-manipulation library for X a ii libselinux1 2.0.94-1 SELinux runtime shared libraries ii libudev0 151-3 libudev shared library ii libxau6 1:1.0.5-2 X11 authorisation library ii libxdmcp6 1:1.0.3-2 X11 Display Manager Control Protoc ii libxfont1 1:1.4.1-2 X11 font rasterisation library ii udev 151-3 /dev/ and hotplug management daemo ii xserver-common 2:1.7.6-2 common files used by various X ser ii xserver-xorg 1:7.5+5 the X.Org X server Versions of packages xserver-xorg-core recommends: ii libgl1-mesa-dri 7.7.1-1 A free implementation of the OpenG Versions of packages xserver-xorg-core suggests: ii xfonts-100dpi 1:1.0.1 100 dpi fonts for X ii xfonts-75dpi 1:1.0.1 75 dpi fonts for X ii xfonts-scalable 1:1.0.1-1 scalable fonts for X -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
