> This is an intentional change. The developers found that dynamic power
> saving is buggy on this hardware.
IIUC This is not true. It works very reliably with earlier versions of
the driver. The bug only shows up in connection with the new
power-saving scheme they implemented which IIUC changes the power-saving
state more dynamically.
> You can use the kill switch to turn off the wireless interface when
> you're not using it.
1- that doesn't help when you do use the wifi.
2- in my experience it still uses up a lot more power than with the wifi
enabled but in power-saving mode (yes, it makes no sense, but on my
Thinkpad T60 at least, that's what I see very clearly).
Stefan
> --
> Ben Hutchings
> Once a job is fouled up, anything done to improve it makes it worse.
> ----------
> From: Stefan Monnier <monn...@iro.umontreal.ca>
> Subject: linux-image-2.6.33-2-686: Intel wifi does not save power any more
> To: Debian Bug Tracking System <sub...@bugs.debian.org>
> Date: Sat, 27 Mar 2010 15:19:42 -0400
> Package: linux-2.6
> Version: 2.6.33-1~experimental.4
> Severity: normal
> I recently switched to the new 2.6.33 kernel because of its support
> for the TRIM command for my SSD disk, but it turns out that it has one
> very serious regression: its iwl3945 driver seems not to provide any
> power-saving any more. This makes a significant difference on the overall
> battery-autonomy of my laptop.
> Stefan
> -- Package-specific info:
> ** Version:
> Linux version 2.6.33-2-686 (Debian 2.6.33-1~experimental.4) (m...@debian.org)
> (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Thu Mar 18 07:30:30 UTC 2010
> ** Command line:
> root=/dev/mapper/Ceviche-root ro vga=0x343
> ** Not tainted
> ** Kernel log:
> [ 3.965455] yenta_cardbus 0000:15:00.0: Socket status: 30000007
> [ 3.965461] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O
> window: 0xa000 - 0xdfff
> [ 3.965465] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xdfff:
> clean.
> [ 3.966774] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory
> window: 0xe4300000 - 0xe7ffffff
> [ 3.966778] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory
> window: 0xe0000000 - 0xe3ffffff
> [ 3.967275] thinkpad_acpi: Standard ACPI backlight interface available,
> not loading native one.
> [ 3.967366] thinkpad_acpi: Console audio control enabled, mode: monitor
> (read only)
> [ 3.970242] input: ThinkPad Extra Buttons as
> /devices/platform/thinkpad_acpi/input/input6
> [ 3.977187] iwl3945 0000:03:00.0: Tunable channels: 11 802.11bg, 13
> 802.11a channels
> [ 3.977192] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
> [ 3.977374] iwl3945 0000:03:00.0: irq 31 for MSI/MSI-X
> [ 4.001155] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) ->
> IRQ 17
> [ 4.001159] hda_intel: probe_mask set to 0x1 for device 17aa:2010
> [ 4.001221] HDA Intel 0000:00:1b.0: irq 32 for MSI/MSI-X
> [ 4.001254] HDA Intel 0000:00:1b.0: setting latency timer to 64
> [ 4.020598] phy0: Selected rate control algorithm 'iwl-3945-rs'
> [ 4.072928] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
> [ 4.141017] input: HDA Digital PCBeep as
> /devices/pci0000:00/0000:00:1b.0/input/input7
> [ 4.476223] Adding 2097144k swap on /dev/mapper/Ceviche-swap. Priority:-1
> extents:1 across:2097144k
> [ 4.535789] EXT3-fs (dm-0): using internal journal
> [ 4.568443] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps:
> 0xa04793/0x300000
> [ 4.576794] serio: Synaptics pass-through port at isa0060/serio1/input0
> [ 4.612023] usb 5-1: new full speed USB device using uhci_hcd and address 3
> [ 4.636247] input: SynPS/2 Synaptics TouchPad as
> /devices/platform/i8042/serio1/input/input8
> [ 4.697973] kjournald starting. Commit interval 5 seconds
> [ 4.698090] EXT3-fs (dm-3): using internal journal
> [ 4.698095] EXT3-fs (dm-3): mounted filesystem with ordered data mode
> [ 4.705143] kjournald starting. Commit interval 5 seconds
> [ 4.705218] EXT3-fs (sda1): using internal journal
> [ 4.705221] EXT3-fs (sda1): mounted filesystem with ordered data mode
> [ 4.754090] kjournald starting. Commit interval 5 seconds
> [ 4.754213] EXT3-fs (dm-4): using internal journal
> [ 4.754216] EXT3-fs (dm-4): mounted filesystem with ordered data mode
> [ 4.823236] usb 5-1: New USB device found, idVendor=0a5c, idProduct=2110
> [ 4.832413] usb 5-1: New USB device strings: Mfr=1, Product=2,
> SerialNumber=0
> [ 4.841633] usb 5-1: Product: BCM2045B
> [ 4.850693] usb 5-1: Manufacturer: Broadcom Corp
> [ 4.888059] Bluetooth: Core ver 2.15
> [ 4.897608] NET: Registered protocol family 31
> [ 4.897611] Bluetooth: HCI device and connection manager initialized
> [ 4.897615] Bluetooth: HCI socket layer initialized
> [ 4.899911] Bluetooth: Generic Bluetooth USB driver ver 0.6
> [ 4.900035] usbcore: registered new interface driver btusb
> [ 4.959178] fuse init (API version 7.13)
> [ 5.488801] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
> [ 5.540149] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
> [ 5.540809] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 6.289586] lp: driver loaded but no devices found
> [ 6.305769] ppdev: user-space parallel port driver
> [ 7.193681] thinkpad_acpi: deprecated sysfs attribute: access by process
> with PID 1743
> [ 7.193688] thinkpad_acpi: WARNING: sysfs attribute bluetooth_enable is
> deprecated and will be removed. Please switch to generic rfkill before year
> 2010
> [ 7.348382] usb 5-1: USB disconnect, address 3
> [ 7.365114] Bluetooth: L2CAP ver 2.14
> [ 7.373447] Bluetooth: L2CAP socket layer initialized
> [ 7.386764] Bluetooth: RFCOMM TTY layer initialized
> [ 7.394494] Bluetooth: RFCOMM socket layer initialized
> [ 7.402191] Bluetooth: RFCOMM ver 1.11
> [ 7.478122] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [ 7.488315] Bluetooth: BNEP filters: protocol multicast
> [ 7.508047] Bridge firewalling registered
> [ 7.524511] Bluetooth: SCO (Voice Link) ver 0.6
> [ 7.532201] Bluetooth: SCO socket layer initialized
> [ 8.403024] iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-2.ucode
> [ 8.434124] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
> [ 8.549166] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> [ 8.650349] CPUFREQ: Per core ondemand sysfs interface is deprecated -
> ignore_nice_load
> [ 8.658046] pci 0000:01:00.0: power state changed by ACPI to D0
> [ 8.658067] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 8.709622] [drm] Initialized drm 1.1.0 20060810
> [ 8.759027] [drm] radeon defaulting to userspace modesetting.
> [ 8.759422] pci 0000:01:00.0: setting latency timer to 64
> [ 8.760659] [drm] Initialized radeon 1.32.0 20080528 for 0000:01:00.0 on
> minor 0
> [ 9.326412] [drm] Setting GART location based on new memory map
> [ 9.327127] [drm] Loading R500 Microcode
> [ 9.327132] platform radeon_cp.0: firmware: requesting radeon/R520_cp.bin
> [ 9.330263] radeon_cp: Failed to load firmware "radeon/R520_cp.bin"
> [ 9.330267] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
> [ 10.708828] IBM TrackPoint firmware: 0x0e, buttons: 3/3
> [ 10.941265] input: TPPS/2 IBM TrackPoint as
> /devices/platform/i8042/serio1/serio2/input/input9
> [ 10.972064] CE: hpet increasing min_delta_ns to 15000 nsec
> [ 10.972137] CE: hpet increasing min_delta_ns to 22500 nsec
> [ 10.972209] CE: hpet increasing min_delta_ns to 33750 nsec
> [ 15.214181] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> [ 15.512423] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
> [ 15.568181] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
> [ 15.569005] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 15.749064] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> [ 19.656865] wlan0: direct probe to AP 00:18:3f:cb:5a:59 (try 1)
> [ 19.658657] wlan0: direct probe responded
> [ 19.658661] wlan0: authenticate with AP 00:18:3f:cb:5a:59 (try 1)
> [ 19.661767] wlan0: authenticated
> [ 19.661784] wlan0: associate with AP 00:18:3f:cb:5a:59 (try 1)
> [ 19.664197] wlan0: RX AssocResp from 00:18:3f:cb:5a:59 (capab=0x431
> status=0 aid=3)
> [ 19.664200] wlan0: associated
> [ 19.665645] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
> [ 19.665693] cfg80211: Calling CRDA for country: US
> [ 29.932055] wlan0: no IPv6 routers present
> [ 31.117172] tun: Universal TUN/TAP device driver, 1.6
> [ 31.117179] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
> [ 31.118709] tun0: Disabled Privacy Extensions
> ** Model information
> not available
> ** Loaded modules:
> Module Size Used by
> tun 8955 2
> radeon 490641 1
> ttm 33557 1 radeon
> drm_kms_helper 18257 1 radeon
> drm 112447 4 radeon,ttm,drm_kms_helper
> i2c_algo_bit 3497 1 radeon
> sco 5889 2
> bridge 32977 0
> stp 996 1 bridge
> bnep 7591 2
> rfcomm 24502 0
> l2cap 22430 6 bnep,rfcomm
> crc16 1027 1 l2cap
> ppdev 4449 0
> lp 5845 0
> parport 22250 2 ppdev,lp
> autofs4 18003 1
> acpi_cpufreq 5135 1
> cpufreq_userspace 1492 0
> cpufreq_conservative 6198 0
> cpufreq_stats 1940 0
> cpufreq_powersave 602 0
> fuse 43964 1
> btusb 7993 0
> bluetooth 35663 7 sco,bnep,rfcomm,l2cap,btusb
> joydev 6778 0
> snd_hda_codec_analog 45501 1
> arc4 974 2
> pcmcia 16389 0
> ecb 1405 2
> snd_hda_intel 16923 1
> snd_hda_codec 48763 2 snd_hda_codec_analog,snd_hda_intel
> snd_hwdep 4082 1 snd_hda_codec
> snd_pcm 47219 2 snd_hda_intel,snd_hda_codec
> snd_seq 35421 0
> iwl3945 45370 0
> snd_timer 12349 2 snd_pcm,snd_seq
> snd_seq_device 3673 1 snd_seq
> iwlcore 70879 1 iwl3945
> mac80211 125802 2 iwl3945,iwlcore
> yenta_socket 16435 1
> thinkpad_acpi 45533 0
> i2c_i801 6458 0
> rsrc_nonstatic 7057 1 yenta_socket
> cfg80211 90741 3 iwl3945,iwlcore,mac80211
> led_class 1753 1 thinkpad_acpi
> nsc_ircc 10299 0
> snd 34703 11
> snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device,thinkpad_acpi
> ac 1640 0
> battery 3782 0
> tpm_tis 5496 0
> psmouse 38755 0
> rfkill 10320 4 bluetooth,thinkpad_acpi,cfg80211
> pcmcia_core 20803 3 pcmcia,yenta_socket,rsrc_nonstatic
> i2c_core 12265 5
> radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
> tpm 8129 1 tpm_tis
> tpm_bios 3557 1 tpm
> rng_core 2350 0
> irda 72560 1 nsc_ircc
> crc_ccitt 1039 1 irda
> evdev 5629 20
> soundcore 3642 1 snd
> snd_page_alloc 5097 2 snd_hda_intel,snd_pcm
> nvram 4149 1 thinkpad_acpi
> serio_raw 3104 0
> pcspkr 1207 0
> processor 25817 3 acpi_cpufreq
> ext3 93823 4
> jbd 32613 1 ext3
> mbcache 3762 1 ext3
> dm_mod 47420 14
> sg 16151 0
> sr_mod 10926 0
> cdrom 26450 1 sr_mod
> sd_mod 26607 3
> crc_t10dif 1012 1 sd_mod
> ata_generic 2043 0
> uhci_hcd 16149 0
> intel_agp 20257 0
> agpgart 19551 3 ttm,drm,intel_agp
> video 15053 0
> output 1196 1 video
> button 3598 0
> ata_piix 17149 0
> ahci 27102 2
> libata 115325 3 ata_generic,ata_piix,ahci
> e1000e 99469 0
> scsi_mod 102273 4 sg,sr_mod,sd_mod,libata
> ehci_hcd 27870 0
> usbcore 100734 4 btusb,uhci_hcd,ehci_hcd
> nls_base 4541 1 usbcore
> thermal 9405 0
> fan 2506 0
> thermal_sys 9402 4 processor,video,thermal,fan
> ** PCI devices:
> 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML
> and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
> Subsystem: Lenovo ThinkPad T60 [17aa:2015]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort+ >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: <access denied>
> 00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML
> and 945GT Express PCI Express Root Port [8086:27a1] (rev 03) (prog-if 00
> [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> I/O behind bridge: 00002000-00002fff
> Memory behind bridge: ee100000-ee1fffff
> Prefetchable memory behind bridge: 00000000d8000000-00000000dfffffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
> 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High
> Definition Audio Controller [8086:27d8] (rev 02)
> Subsystem: Lenovo ThinkPad T60/R60 series [17aa:2010]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin B routed to IRQ 32
> Region 0: Memory at ee400000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: <access denied>
> Kernel driver in use: HDA Intel
> 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express
> Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> I/O behind bridge: 00003000-00003fff
> Memory behind bridge: ee000000-ee0fffff
> Prefetchable memory behind bridge: 00000000c0000000-00000000c01fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
> 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express
> Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
> I/O behind bridge: 00004000-00005fff
> Memory behind bridge: ec000000-edffffff
> Prefetchable memory behind bridge: 00000000e4000000-00000000e40fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
> 00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express
> Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=04, subordinate=0b, sec-latency=0
> I/O behind bridge: 00006000-00007fff
> Memory behind bridge: e8000000-e9ffffff
> Prefetchable memory behind bridge: 00000000e4100000-00000000e41fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
> 00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express
> Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=0c, subordinate=13, sec-latency=0
> I/O behind bridge: 00008000-00009fff
> Memory behind bridge: ea000000-ebffffff
> Prefetchable memory behind bridge: 00000000e4200000-00000000e42fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
> 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH7 Family USB UHCI
> Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
> Subsystem: Lenovo ThinkPad T60/R60 series [17aa:200a]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 16
> Region 4: I/O ports at 1800 [size=32]
> Kernel driver in use: uhci_hcd
> 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
> Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
> Subsystem: Lenovo ThinkPad T60/R60 series [17aa:200a]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 17
> Region 4: I/O ports at 1820 [size=32]
> Kernel driver in use: uhci_hcd
> 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
> Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
> Subsystem: Lenovo ThinkPad T60/R60 series [17aa:200a]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin C routed to IRQ 18
> Region 4: I/O ports at 1840 [size=32]
> Kernel driver in use: uhci_hcd
> 00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
> Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
> Subsystem: Lenovo ThinkPad T60/R60 series [17aa:200a]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin D routed to IRQ 19
> Region 4: I/O ports at 1860 [size=32]
> Kernel driver in use: uhci_hcd
> 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI
> Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
> Subsystem: Lenovo ThinkPad T60/R60 series [17aa:200b]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin D routed to IRQ 19
> Region 0: Memory at ee404000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: <access denied>
> Kernel driver in use: ehci_hcd
> 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
> [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Bus: primary=00, secondary=15, subordinate=18, sec-latency=32
> I/O behind bridge: 0000a000-0000dfff
> Memory behind bridge: e4300000-e7ffffff
> Prefetchable memory behind bridge: 00000000e0000000-00000000e3ffffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface
> Bridge [8086:27b9] (rev 02)
> Subsystem: Lenovo ThinkPad T60/R60 series [17aa:2009]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: <access denied>
> 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
> Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP])
> Subsystem: Lenovo ThinkPad T60/R60 series [17aa:200c]
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin C routed to IRQ 16
> Region 0: I/O ports at 01f0 [size=8]
> Region 1: I/O ports at 03f4 [size=1]
> Region 2: I/O ports at 0170 [size=8]
> Region 3: I/O ports at 0374 [size=1]
> Region 4: I/O ports at 1880 [size=16]
> Kernel driver in use: ata_piix
> 00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7 Family)
> SATA AHCI Controller [8086:27c5] (rev 02) (prog-if 01 [AHCI 1.0])
> Subsystem: Lenovo ThinkPad T60/R60 series [17aa:200d]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 30
> Region 0: I/O ports at 18c8 [size=8]
> Region 1: I/O ports at 18ac [size=4]
> Region 2: I/O ports at 18c0 [size=8]
> Region 3: I/O ports at 18a8 [size=4]
> Region 4: I/O ports at 18b0 [size=16]
> Region 5: Memory at ee404400 (32-bit, non-prefetchable) [size=1K]
> Capabilities: <access denied>
> Kernel driver in use: ahci
> 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller
> [8086:27da] (rev 02)
> Subsystem: Lenovo ThinkPad T60/R60 series [17aa:200f]
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin A routed to IRQ 23
> Region 4: I/O ports at 18e0 [size=32]
> Kernel driver in use: i801_smbus
> 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M52 [Mobility
> Radeon X1300] [1002:7149] (prog-if 00 [VGA controller])
> Subsystem: Lenovo Device [17aa:2005]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
> Region 1: I/O ports at 2000 [size=256]
> Region 2: Memory at ee100000 (32-bit, non-prefetchable) [size=64K]
> [virtual] Expansion ROM at ee120000 [disabled] [size=128K]
> Capabilities: <access denied>
> 02:00.0 Ethernet controller [0200]: Intel Corporation 82573L Gigabit Ethernet
> Controller [8086:109a]
> Subsystem: Lenovo ThinkPad T60 [17aa:2001]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 29
> Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=128K]
> Region 2: I/O ports at 3000 [size=32]
> Capabilities: <access denied>
> Kernel driver in use: e1000e
> 03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG
> [Golan] Network Connection [8086:4227] (rev 02)
> Subsystem: Intel Corporation Device [8086:1010]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 31
> Region 0: Memory at edf00000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: <access denied>
> Kernel driver in use: iwl3945
> 15:00.0 CardBus bridge [0607]: Texas Instruments PCI1510 PC card Cardbus
> Controller [104c:ac56]
> Subsystem: Lenovo ThinkPad T60/R60 series [17aa:2012]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 168, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at e4300000 (32-bit, non-prefetchable) [size=4K]
> Bus: primary=15, secondary=16, subordinate=17, sec-latency=176
> Memory window 0: e0000000-e3fff000 (prefetchable)
> Memory window 1: c4000000-c7fff000
> I/O window 0: 0000a000-0000a0ff
> I/O window 1: 0000a400-0000a4ff
> BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
> 16-bit legacy interface ports at 0001
> Kernel driver in use: yenta_cardbus
> ** USB devices:
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 005 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint
> Reader
> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> -- System Information:
> Debian Release: squeeze/sid
> APT prefers testing
> APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable'), (1,
> 'experimental')
> Architecture: i386 (i686)
> Kernel: Linux 2.6.33-2-686 (SMP w/2 CPU cores)
> Locale: LANG=fr_CH.UTF-8, LC_CTYPE=fr_CH.UTF-8 (charmap=UTF-8)
> Shell: /bin/sh linked to /bin/dash
> Versions of packages linux-image-2.6.33-2-686 depends on:
> ii debconf [debconf 1.5.28 Debian configuration management
> sy
> ii initramfs-tools 0.93.4 tools for generating an initramfs
> ii linux-base 2.6.33-1~experimental.4 Linux image base package
> ii module-init-tool 3.12~pre2-1 tools for managing Linux kernel
> mo
> Versions of packages linux-image-2.6.33-2-686 recommends:
> ii firmware-linux-free 2.6.32-9 Binary firmware for various
> driver
> ii libc6-i686 2.10.2-6 GNU C Library: Shared libraries
> [i
> Versions of packages linux-image-2.6.33-2-686 suggests:
> ii grub-legacy [grub] 0.97-59 GRand Unified Bootloader (Legacy
> v
> pn linux-doc-2.6.33 <none> (no description available)
> Versions of packages linux-image-2.6.33-2-686 is related to:
> pn firmware-bnx2 <none> (no description available)
> pn firmware-bnx2x <none> (no description available)
> pn firmware-ipw2x00 <none> (no description available)
> pn firmware-ivtv <none> (no description available)
> ii firmware-iwlwifi 0.23 Binary firmware for Intel
> Wireless
> pn firmware-linux <none> (no description available)
> pn firmware-linux-nonfree <none> (no description available)
> pn firmware-qlogic <none> (no description available)
> ii firmware-ralink 0.23 Binary firmware for Ralink
> RT2561,
> -- debconf information:
> linux-image-2.6.33-2-686/postinst/depmod-error-initrd-2.6.33-2-686: false
> linux-image-2.6.33-2-686/postinst/bootloader-error-2.6.33-2-686:
> linux-image-2.6.33-2-686/postinst/bootloader-test-error-2.6.33-2-686:
> shared/kernel-image/really-run-bootloader: true
> linux-image-2.6.33-2-686/prerm/would-invalidate-boot-loader-2.6.33-2-686:
> true
> linux-image-2.6.33-2-686/prerm/removing-running-kernel-2.6.33-2-686: true
> linux-image-2.6.33-2-686/postinst/missing-firmware-2.6.33-2-686:
> ----------
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
