Package: hylafax-server Version: 2:6.0.4-2 Debian Sid, updated to the latest as of today.
Fax receive works fine. Sending seems to work fine too. Documents are moved to sent folder (seen by clients). In the Done queue the docs generated are complete documents. But actual transfer is only the Taglines. If there are 2 pages, there are 2 taglines and no sign of the document. Here is the Session Log. ***************************************************** Mar 21 14:53:39.78: [ 6386]: SESSION BEGIN 000000023 86755804 Mar 21 14:53:39.78: [ 6386]: HylaFAX (tm) Version 6.0.4 Mar 21 14:53:39.78: [ 6386]: SEND FAX: JOB 11 DEST 804 COMMID 000000023 DEVICE '/dev/ttyS0' FROM 'Sunita Paudyal <sun...@amd>' USER sunita Mar 21 14:53:39.78: [ 6386]: STATE CHANGE: RUNNING -> SENDING Mar 21 14:53:39.78: [ 6386]: <-- [12:AT+FCLASS=1\r] Mar 21 14:53:39.81: [ 6386]: --> [2:OK] Mar 21 14:53:39.81: [ 6386]: DIAL 804 Mar 21 14:53:39.81: [ 6386]: <-- [8:ATDT804\r] Mar 21 14:53:47.31: [ 6386]: --> [7:CONNECT] Mar 21 14:53:49.42: [ 6386]: --> HDLC<42:FF C0 04 00 00 70 00 00 00 69 F0 80 C0 00 08 A0 40 A9 13 10 80 92 40 82 2E 2E 86 4E 96 04 2A A6 C6 16 76 F6 36 F6 E6 C0 41 CA> Mar 21 14:53:49.42: [ 6386]: --> [2:OK] Mar 21 14:53:49.42: [ 6386]: REMOTE NSF "00 00 0E 00 00 00 96 0F 01 03 00 10 05 02 95 C8 08 01 49 02 41 74 74 61 72 69 20 54 65 63 68 6E 6F 6C 6F 67 03" Mar 21 14:53:49.42: [ 6386]: NSF remote fax equipment: Panasonic KX-F230/KX-FT21 Mar 21 14:53:49.42: [ 6386]: NSF remote station ID: "Attari Technolog" Mar 21 14:53:49.42: [ 6386]: <-- [9:AT+FRH=3\r] Mar 21 14:53:49.44: [ 6386]: --> [7:CONNECT] Mar 21 14:53:50.16: [ 6386]: --> HDLC<25:FF C0 02 1C CC 0C 6C 04 9C EC CC 1C 04 AC AC EC 04 6C 1C D4 04 04 04 48 87> Mar 21 14:53:50.17: [ 6386]: --> [2:OK] Mar 21 14:53:50.17: [ 6386]: REMOTE CSI "+86 755 8379 6038" Mar 21 14:53:50.17: [ 6386]: <-- [9:AT+FRH=3\r] Mar 21 14:53:50.19: [ 6386]: --> [7:CONNECT] Mar 21 14:53:50.48: [ 6386]: --> HDLC<9:FF C8 01 00 73 1D 00 46 14> Mar 21 14:53:50.49: [ 6386]: --> [2:OK] Mar 21 14:53:50.49: [ 6386]: REMOTE best rate 9600 bit/s Mar 21 14:53:50.49: [ 6386]: REMOTE max A4 page width (215 mm) Mar 21 14:53:50.49: [ 6386]: REMOTE max unlimited page length Mar 21 14:53:50.49: [ 6386]: REMOTE best vres 7.7 line/mm Mar 21 14:53:50.49: [ 6386]: REMOTE format support: MH, MR Mar 21 14:53:50.49: [ 6386]: REMOTE best 20 ms, 10 ms/scanline Mar 21 14:53:50.49: [ 6386]: USE 9600 bit/s Mar 21 14:53:50.49: [ 6386]: SEND file "docq/cover11;f1" Mar 21 14:53:50.49: [ 6386]: USE A4 page width (215 mm) Mar 21 14:53:50.49: [ 6386]: USE unlimited page length Mar 21 14:53:50.49: [ 6386]: USE 7.7 line/mm Mar 21 14:53:50.49: [ 6386]: USE 2-D MR Mar 21 14:53:50.49: [ 6386]: USE 10 ms/scanline Mar 21 14:53:50.49: [ 6386]: SEND training at v.29 9600 bit/s Mar 21 14:53:50.49: [ 6386]: <-- [9:AT+FRS=7\r] Mar 21 14:53:50.64: [ 6386]: --> [2:OK] Mar 21 14:53:50.64: [ 6386]: <-- [9:AT+FTH=3\r] Mar 21 14:53:50.68: [ 6386]: --> [7:CONNECT] Mar 21 14:53:50.68: [ 6386]: <-- HDLC<23:FF C0 C2 2E 32 04 9E E6 F6 36 F6 76 16 C6 A6 2A 04 96 4E 86 2E 2E 82> Mar 21 14:53:50.68: [ 6386]: <-- data [23] Mar 21 14:53:50.68: [ 6386]: <-- data [2] Mar 21 14:53:52.30: [ 6386]: --> [7:CONNECT] Mar 21 14:53:52.30: [ 6386]: <-- HDLC<6:FF C8 C1 00 63 14> Mar 21 14:53:52.30: [ 6386]: <-- data [6] Mar 21 14:53:52.30: [ 6386]: <-- data [2] Mar 21 14:53:52.70: [ 6386]: --> [2:OK] Mar 21 14:53:52.70: [ 6386]: <-- [9:AT+FTS=7\r] Mar 21 14:53:52.79: [ 6386]: --> [2:OK] Mar 21 14:53:52.79: [ 6386]: <-- [10:AT+FTM=96\r] Mar 21 14:53:52.82: [ 6386]: --> [7:CONNECT] Mar 21 14:53:52.82: [ 6386]: <-- data [1024] Mar 21 14:53:52.82: [ 6386]: <-- data [776] Mar 21 14:53:52.82: [ 6386]: <-- data [2] Mar 21 14:53:54.61: [ 6386]: --> [2:OK] Mar 21 14:53:54.61: [ 6386]: <-- [9:AT+FRH=3\r] Mar 21 14:53:55.79: [ 6386]: --> [7:CONNECT] Mar 21 14:53:56.91: [ 6386]: --> HDLC<5:FF C8 21 57 BE> Mar 21 14:53:56.92: [ 6386]: --> [2:OK] Mar 21 14:53:56.92: [ 6386]: TRAINING succeeded Mar 21 14:53:56.92: [ 6386]: <-- [9:AT+FRS=7\r] Mar 21 14:53:57.07: [ 6386]: --> [2:OK] Mar 21 14:53:57.07: [ 6386]: <-- [10:AT+FTM=96\r] Mar 21 14:53:57.11: [ 6386]: --> [7:CONNECT] Mar 21 14:53:57.11: [ 6386]: SEND begin page Mar 21 14:53:57.11: [ 6386]: Reading MMR-compressed image file Mar 21 14:53:57.11: [ 6386]: <-- data [420] Mar 21 14:53:57.11: [ 6386]: SENT 416 bytes of data Mar 21 14:53:57.11: [ 6386]: <-- data [409] Mar 21 14:53:57.11: [ 6386]: SENT 408 bytes of data Mar 21 14:53:57.11: [ 6386]: <-- data [372] Mar 21 14:53:57.11: [ 6386]: SENT 370 bytes of data Mar 21 14:53:57.11: [ 6386]: SEND 2D RTC Mar 21 14:53:57.11: [ 6386]: <-- data [30] Mar 21 14:53:57.11: [ 6386]: <-- data [2] Mar 21 14:53:57.11: [ 6386]: SEND end page Mar 21 14:53:58.42: [ 6386]: --> [2:OK] Mar 21 14:53:58.42: [ 6386]: <-- [9:AT+FTS=7\r] Mar 21 14:53:58.52: [ 6386]: --> [2:OK] Mar 21 14:53:58.52: [ 6386]: SEND send MPS (more pages, same document) Mar 21 14:53:58.52: [ 6386]: <-- [9:AT+FTH=3\r] Mar 21 14:53:58.54: [ 6386]: --> [7:CONNECT] Mar 21 14:53:58.54: [ 6386]: <-- HDLC<3:FF C8 F2> Mar 21 14:53:58.54: [ 6386]: <-- data [3] Mar 21 14:53:58.54: [ 6386]: <-- data [2] Mar 21 14:53:59.78: [ 6386]: --> [2:OK] Mar 21 14:53:59.78: [ 6386]: <-- [9:AT+FRH=3\r] Mar 21 14:54:00.51: [ 6386]: --> [7:CONNECT] Mar 21 14:54:01.62: [ 6386]: --> HDLC<5:FF C8 31 45 8F> Mar 21 14:54:01.63: [ 6386]: --> [2:OK] Mar 21 14:54:01.63: [ 6386]: SEND recv MCF (message confirmation) Mar 21 14:54:01.63: [ 6386]: SEND FAX (000000023): FROM sun...@amd TO 804 (page 1 of 2[1,2,0,0] sent in 0:00:11) Mar 21 14:54:01.63: [ 6386]: <-- [9:AT+FRS=7\r] Mar 21 14:54:01.79: [ 6386]: --> [2:OK] Mar 21 14:54:01.79: [ 6386]: SEND FAX (000000023): FROM sun...@amd TO 804 (docq/cover11;f1 sent in 0:00:11) Mar 21 14:54:01.79: [ 6386]: SEND file "docq/doc19.ps;f1" Mar 21 14:54:01.79: [ 6386]: <-- [10:AT+FTM=96\r] Mar 21 14:54:01.82: [ 6386]: --> [7:CONNECT] Mar 21 14:54:01.82: [ 6386]: SEND begin page Mar 21 14:54:01.83: [ 6386]: Reading MMR-compressed image file Mar 21 14:54:01.83: [ 6386]: <-- data [421] Mar 21 14:54:01.83: [ 6386]: SENT 417 bytes of data Mar 21 14:54:01.83: [ 6386]: <-- data [411] Mar 21 14:54:01.83: [ 6386]: SENT 410 bytes of data Mar 21 14:54:01.83: [ 6386]: <-- data [373] Mar 21 14:54:01.83: [ 6386]: SENT 371 bytes of data Mar 21 14:54:01.83: [ 6386]: SEND 2D RTC Mar 21 14:54:01.83: [ 6386]: <-- data [30] Mar 21 14:54:01.83: [ 6386]: <-- data [2] Mar 21 14:54:01.83: [ 6386]: SEND end page Mar 21 14:54:03.14: [ 6386]: --> [2:OK] Mar 21 14:54:03.14: [ 6386]: <-- [9:AT+FTS=9\r] Mar 21 14:54:03.25: [ 6386]: --> [2:OK] Mar 21 14:54:03.25: [ 6386]: SEND send EOP (no more pages or documents) Mar 21 14:54:03.25: [ 6386]: <-- [9:AT+FTH=3\r] Mar 21 14:54:03.27: [ 6386]: --> [7:CONNECT] Mar 21 14:54:03.27: [ 6386]: <-- HDLC<3:FF C8 F4> Mar 21 14:54:03.27: [ 6386]: <-- data [3] Mar 21 14:54:03.27: [ 6386]: <-- data [2] Mar 21 14:54:04.52: [ 6386]: --> [2:OK] Mar 21 14:54:04.52: [ 6386]: <-- [9:AT+FRH=3\r] Mar 21 14:54:05.24: [ 6386]: --> [7:CONNECT] Mar 21 14:54:06.35: [ 6386]: --> HDLC<5:FF C8 31 45 8F> Mar 21 14:54:06.36: [ 6386]: --> [2:OK] Mar 21 14:54:06.36: [ 6386]: SEND recv MCF (message confirmation) Mar 21 14:54:06.36: [ 6386]: SEND FAX (000000023): FROM sun...@amd TO 804 (page 2 of 2[2,2,0,0] sent in 0:00:05) Mar 21 14:54:06.36: [ 6386]: <-- [9:AT+FRS=7\r] Mar 21 14:54:06.51: [ 6386]: --> [2:OK] Mar 21 14:54:06.51: [ 6386]: SEND FAX (000000023): FROM sun...@amd TO 804 (docq/doc19.ps;f1 sent in 0:00:05) Mar 21 14:54:06.51: [ 6386]: <-- [9:AT+FTH=3\r] Mar 21 14:54:06.55: [ 6386]: --> [7:CONNECT] Mar 21 14:54:06.55: [ 6386]: <-- HDLC<3:FF C8 DF> Mar 21 14:54:06.55: [ 6386]: <-- data [3] Mar 21 14:54:06.55: [ 6386]: <-- data [2] Mar 21 14:54:07.80: [ 6386]: --> [2:OK] Mar 21 14:54:07.80: [ 6386]: MODEM input buffering enabled Mar 21 14:54:08.80: [ 6386]: <-- [5:ATH0\r] Mar 21 14:54:08.96: [ 6386]: --> [2:OK] Mar 21 14:54:08.96: [ 6386]: MODEM set DTR OFF Mar 21 14:54:08.96: [ 6386]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5) Mar 21 14:54:08.96: [ 6386]: SESSION END *************************************************** Here is the xferfaxlog 03/21/10 14:53 SEND 000000023 ttyS0 11 "" sun...@amd "804" "+86 755 8379 6038" 2908185 2 0:00:29 0:00:21 "" "" "" "" "sunita" "00 63 14" ************************************************ Thank you for -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
