Package: linux-2.6
Version: 2.6.26-21lenny4
Followup-For: Bug #573490
-- Package-specific info:
** Version:
Linux version 2.6.26-2-amd64 (Debian 2.6.26-21lenny4) (da...@debian.org) (gcc
version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Tue Mar 9
22:29:32 UTC 2010
** Command line:
root=/dev/sda3 ro console=tty0 console=ttyS0,115200n8 quiet
** Not tainted
** Kernel log:
[ 6.587338] PM: Starting manual resume from disk
[ 6.599139] kjournald starting. Commit interval 5 seconds
[ 6.601237] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.537322] udevd version 125 started
[ 7.772919] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 7.781598] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.806930] input: Power Button (FF) as /class/input/input1
[ 7.858107] ACPI: Power Button (FF) [PWRF]
[ 7.858144] input: Sleep Button (CM) as /class/input/input2
[ 7.920030] ACPI: Sleep Button (CM) [SLPB]
[ 7.920071] input: Power Button (CM) as /class/input/input3
[ 7.955882] input: PC Speaker as /class/input/input4
[ 7.974501] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 18 (level, low) ->
IRQ 18
[ 7.993456] ACPI: Power Button (CM) [PWRB]
[ 8.072817] Error: Driver 'pcspkr' is already registered, aborting...
[ 9.241745] Adding 8000360k swap on /dev/sda2. Priority:-1 extents:1
across:8000360k
[ 9.685320] EXT3 FS on sda3, internal journal
[ 10.348143] loop: module loaded
[ 10.382092] ipmi message handler version 39.2
[ 10.382092] ipmi device interface
[ 10.397147] IPMI Watchdog: driver initialized
[ 10.405148] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via
sys_reboot.
[ 10.414143] IPMI System Interface driver.
[ 10.414143] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o
address 0xca2, slave address 0x20, irq 0
[ 10.552556] ipmi: Found new BMC (man_id: 0x000157, prod_id: 0x003a, dev_id:
0x21)
[ 10.558548] IPMI poweroff: ATCA Detect mfg 0x157 prod 0x3A
[ 10.558548] IPMI poweroff: Found a chassis style poweroff function
[ 10.566378] IPMI kcs interface initialized
[ 10.602551] 802.1Q VLAN Support v1.8 Ben Greear <gree...@candelatech.com>
[ 10.602551] All bugs added by David S. Miller <da...@redhat.com>
[ 10.750823] fuse init (API version 7.9)
[ 10.851741] SGI XFS with ACLs, security attributes, realtime, large
block/inode numbers, no debug enabled
[ 10.855603] SGI XFS Quota Management subsystem
[ 10.855603] XFS mounting filesystem sda4
[ 10.995314] Ending clean XFS mount for filesystem: sda4
[ 11.301381] Ethernet Channel Bonding Driver: v3.2.5 (March 21, 2008)
[ 11.301381] bonding: Warning: either miimon or arp_interval and
arp_ip_target module parameters must be specified, otherwise bonding will not
detect link failures! see bonding.txt for details.
[ 11.304256] bonding: bond0: setting mode to balance-alb (6).
[ 11.304287] bonding: bond0: Setting MII monitoring interval to 100.
[ 11.304315] bonding: bond0: Setting up delay to 200.
[ 11.304340] bonding: bond0: Setting down delay to 200.
[ 11.339755] bonding: bond0: enslaving eth2 as an active interface with a
down link.
[ 11.346925] e1000: eth2: e1000_watchdog: NIC Link is Up 1000 Mbps Full
Duplex, Flow Control: RX
[ 11.362554] bonding: bond0: enslaving eth3 as an active interface with a
down link.
[ 11.389510] e1000: eth3: e1000_watchdog: NIC Link is Up 1000 Mbps Full
Duplex, Flow Control: RX
[ 11.672701] device bond0 entered promiscuous mode
[ 11.736961] bonding: bond1 is being created...
[ 11.737056] bonding: bond1: setting mode to balance-rr (0).
[ 11.737085] bonding: bond1: Setting MII monitoring interval to 100.
[ 11.737112] bonding: bond1: Setting up delay to 200.
[ 11.737137] bonding: bond1: Setting down delay to 200.
[ 11.798009] NET: Registered protocol family 10
[ 11.950031] bonding: bond1: enslaving eth0 as an active interface with a
down link.
[ 11.952187] lo: Disabled Privacy Extensions
[ 11.953714] ADDRCONF(NETDEV_UP): bond0: link is not ready
[ 11.953943] ADDRCONF(NETDEV_UP): bond0.10: link is not ready
[ 11.954031] ADDRCONF(NETDEV_UP): bond0.20: link is not ready
[ 11.954031] ADDRCONF(NETDEV_UP): bond1: link is not ready
[ 12.004230] e1000: eth1: e1000_watchdog: NIC Link is Up 1000 Mbps Full
Duplex, Flow Control: RX/TX
[ 12.005886] bonding: bond1: enslaving eth1 as an active interface with an up
link.
[ 12.208509] eth0: changing MTU from 1500 to 9000
[ 12.277877] bonding: bond1: link status down again after 200 ms for
interface eth1.
[ 12.406706] drbd: disagrees about version of symbol cn_add_callback
[ 12.406706] drbd: Unknown symbol cn_add_callback
[ 12.857147] DLM (built Mar 9 2010 21:58:23) installed
[ 12.873148] GFS2 (built Mar 9 2010 21:59:05) installed
[ 12.885148] Lock_DLM (built Mar 9 2010 21:59:11) installed
[ 14.518281] eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 14.528659] bonding: bond1: link status up for interface eth0, enabling it
in 200 ms.
[ 14.613130] e1000: eth2: e1000_watchdog: NIC Link is Up 1000 Mbps Full
Duplex, Flow Control: RX
[ 14.616582] bonding: bond0: link status up for interface eth2, enabling it
in 200 ms.
[ 14.708133] e1000: eth3: e1000_watchdog: NIC Link is Up 1000 Mbps Full
Duplex, Flow Control: RX
[ 14.763204] bonding: bond0: link status up for interface eth3, enabling it
in 200 ms.
[ 14.771204] bonding: bond1: link status definitely up for interface eth0.
[ 14.771956] ADDRCONF(NETDEV_CHANGE): bond1: link becomes ready
[ 14.863207] bonding: bond0: link status definitely up for interface eth2.
[ 14.863213] bonding: bond0: making interface eth2 the new active one.
[ 14.863215] device eth2 entered promiscuous mode
[ 14.864448] bonding: bond0: first active interface up!
[ 14.865203] ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
[ 14.866122] ADDRCONF(NETDEV_CHANGE): bond0.20: link becomes ready
[ 14.867038] ADDRCONF(NETDEV_CHANGE): bond0.10: link becomes ready
[ 14.967130] bonding: bond0: link status definitely up for interface eth3.
[ 15.508259] e1000: eth1: e1000_watchdog: NIC Link is Up 1000 Mbps Full
Duplex, Flow Control: RX/TX
[ 15.585386] bonding: bond1: link status up for interface eth1, enabling it
in 200 ms.
[ 15.786846] bonding: bond1: link status definitely up for interface eth1.
[ 23.677484] dlm: Using TCP for communications
[ 23.690939] dlm: connecting to 1
[ 23.694939] dlm: got connection from 1
[ 24.941731] SCTP: Hash tables configured (established 65536 bind 65536)
[ 25.551601] RPC: Registered udp transport module.
[ 25.551601] RPC: Registered tcp transport module.
[ 25.583218] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 25.606808] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
[ 25.606808] NFSD: starting 90-second grace period
[ 26.111950] bond1: no IPv6 routers present
[ 26.161481] bond0.10: no IPv6 routers present
[ 26.297609] bond0: no IPv6 routers present
[ 26.434174] bond0.20: no IPv6 routers present
[ 32.005552] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
** Model information
sys_vendor: Intel Corporation
product_name: S3210SH
product_version:
chassis_vendor:
chassis_version: 0000000000
bios_vendor: Intel Corporation
bios_version: S3200X38.86B.00.00.0049.061620090955
board_vendor: Intel Corporation
board_name: S3210SH
board_version: FRU Ver 0.05
** Loaded modules:
Module Size Used by
binfmt_misc 13580 1
nfsd 248616 13
lockd 68944 1 nfsd
nfs_acl 7552 1 nfsd
auth_rpcgss 47520 1 nfsd
sunrpc 197992 11 nfsd,lockd,nfs_acl,auth_rpcgss
exportfs 8704 1 nfsd
sctp 163628 2
libcrc32c 7168 1 sctp
lock_dlm 20904 0
gfs2 481208 1 lock_dlm
dlm 121248 17 lock_dlm
configfs 29352 2 dlm
cn 10668 0
ipv6 288456 35 sctp
bonding 83808 0
xfs 475560 1
ext2 66576 1
fuse 53184 1
8021q 23456 0
ipmi_si 43628 3
ipmi_poweroff 13776 0
ipmi_watchdog 22896 0
ipmi_devintf 13200 2
ipmi_msghandler 38520 4 ipmi_si,ipmi_poweroff,ipmi_watchdog,ipmi_devintf
loop 19468 0
snd_pcm 81800 0
snd_timer 25744 1 snd_pcm
snd 63688 2 snd_pcm,snd_timer
soundcore 12064 1 snd
serio_raw 9988 0
snd_page_alloc 13072 1 snd_pcm
i2c_i801 13596 0
psmouse 42268 0
i2c_core 27936 1 i2c_i801
pcspkr 7040 0
button 11680 0
shpchp 34208 0
pci_hotplug 32056 1 shpchp
evdev 14208 0
ext3 125072 1
jbd 51240 1 ext3
mbcache 12804 2 ext2,ext3
dm_mirror 20608 0
dm_log 13956 1 dm_mirror
dm_snapshot 19400 0
dm_mod 58864 3 dm_mirror,dm_log,dm_snapshot
sr_mod 19652 0
cdrom 37928 1 sr_mod
ide_pci_generic 9220 0 [permanent]
ide_core 128284 1 ide_pci_generic
ata_piix 22660 0
sg 36448 0
sd_mod 29376 5
floppy 61800 0
ata_generic 10116 0
libata 165600 2 ata_piix,ata_generic
dock 14112 1 libata
e1000 117312 0
ehci_hcd 36108 0
uhci_hcd 25760 0
e1000e 105000 0
arcmsr 25856 4
scsi_mod 161016 5 sr_mod,sg,sd_mod,libata,arcmsr
thermal 22688 0
processor 42304 1 thermal
fan 9352 0
thermal_sys 17728 3 thermal,processor,fan
** Network interface configuration:
# this file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# bond physical devices together
auto bond0
iface bond0 inet static
bond_mode balance-alb
bond_miimon 100
bond_downdelay 200
bond_updelay 200
slaves eth2 eth3
hwaddress ether 00:01:68:10:00:22
mtu 9000
address 192.168.100.22
netmask 255.255.255.0
gateway 192.168.100.1
network 192.168.100.0
broadcast 192.168.100.255
auto bond0.10
iface bond0.10 inet static
hwaddress ether 00:00:88:23:80:22
address 195.88.238.22
netmask 255.255.255.192
network 195.88.238.0
auto bond0.20
iface bond0.20 inet static
hwaddress ether 00:00:88:23:90:22
address 195.88.239.22
netmask 255.255.255.192
network 195.88.239.0
auto bond1
iface bond1 inet static
bond_mode balance-rr
bond_miimon 100
bond_downdelay 200
bond_updelay 200
slaves eth0 eth1
hwaddress ether 00:10:99:00:10:22
mtu 9000
address 10.99.1.22
netmask 255.255.255.0
network 10.99.1.0
broadcast 10.99.1.255
# native sub-interface for ha services
#auto bond0:0
#iface bond0:0 inet static
# address 192.168.200.52
# netmask 255.255.255.0
# network 192.168.200.0
# broadcast 192.168.200.255
#auto eth0
#iface eth0 inet static
# address 192.168.200.52
# netmask 255.255.255.0
# gateway 192.168.200.1
# network 192.168.200.0
# broadcast 192.168.200.255
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 9000 qdisc pfifo_fast
master bond1 state UP qlen 1000
link/ether 00:10:99:00:10:22 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 9000 qdisc pfifo_fast
master bond1 state UP qlen 1000
link/ether 00:10:99:00:10:22 brd ff:ff:ff:ff:ff:ff
4: eth2: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 9000 qdisc pfifo_fast
master bond0 state UP qlen 1000
link/ether 00:01:68:10:00:22 brd ff:ff:ff:ff:ff:ff
5: eth3: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 9000 qdisc pfifo_fast
master bond0 state UP qlen 1000
link/ether 00:15:17:28:ca:e4 brd ff:ff:ff:ff:ff:ff
6: bond0: <BROADCAST,MULTICAST,PROMISC,MASTER,UP,LOWER_UP> mtu 9000 qdisc
noqueue state UP
link/ether 00:01:68:10:00:22 brd ff:ff:ff:ff:ff:ff
inet 192.168.100.22/24 brd 192.168.100.255 scope global bond0
inet 192.168.100.23/24 scope global secondary bond0
inet6 fe80::201:68ff:fe10:22/64 scope link
valid_lft forever preferred_lft forever
7: bond0...@bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 9000 qdisc
noqueue state UP
link/ether 00:00:88:23:80:22 brd ff:ff:ff:ff:ff:ff
inet 195.88.238.22/26 brd 195.88.238.63 scope global bond0.10
inet6 fe80::200:88ff:fe23:8022/64 scope link
valid_lft forever preferred_lft forever
8: bond0...@bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 9000 qdisc
noqueue state UP
link/ether 00:00:88:23:90:22 brd ff:ff:ff:ff:ff:ff
inet 195.88.239.22/26 brd 195.88.239.63 scope global bond0.20
inet6 fe80::200:88ff:fe23:9022/64 scope link
valid_lft forever preferred_lft forever
9: bond1: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 9000 qdisc noqueue state
UP
link/ether 00:10:99:00:10:22 brd ff:ff:ff:ff:ff:ff
inet 10.99.1.22/24 brd 10.99.1.255 scope global bond1
inet6 fe80::210:99ff:fe00:1022/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 17217 176 0 0 0 0 0 0 17217
176 0 0 0 0 0 0
eth0: 846286 5898 0 0 0 0 0 2091 510625
3844 0 0 0 0 0 0
eth1: 848429 5898 0 0 0 0 0 2079 515256
3841 0 0 0 0 0 0
eth2: 3733480 6310 0 0 0 0 0 883 769773
7389 0 0 0 0 0 0
eth3: 20132 84 0 0 0 0 0 0 482846
6694 0 0 0 0 0 0
bond0: 3753612 6394 0 0 0 0 0 883 1252619
14083 0 0 0 0 0 0
bond0.10: 0 0 0 0 0 0 0 0 468
6 0 0 0 0 0 0
bond0.20: 0 0 0 0 0 0 0 0 468
6 0 0 0 0 0 0
bond1: 1694715 11796 0 0 0 0 0 4170 1025881
7685 0 0 0 0 0 0
*** Protocol statistics:
Ip:
17394 total packets received
0 forwarded
0 incoming packets discarded
17394 incoming packets delivered
11928 requests sent out
Icmp:
57 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 1
echo requests: 28
echo replies: 28
57 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 1
echo request: 28
echo replies: 28
IcmpMsg:
InType0: 28
InType3: 1
InType8: 28
OutType0: 28
OutType3: 1
OutType8: 28
Tcp:
39 active connections openings
2 passive connection openings
0 failed connection attempts
1 connection resets received
3 connections established
7608 segments received
6361 segments send out
0 segments retransmited
0 bad segments received.
490 resets sent
Udp:
9679 packets received
0 packets to unknown port received.
0 packet receive errors
5508 packets sent
UdpLite:
TcpExt:
62 packets pruned from receive queue because of socket buffer overrun
18 TCP sockets finished time wait in fast timer
86 delayed acks sent
Quick ack mode was activated 2 times
662 packets directly queued to recvmsg prequeue.
615678 bytes directly received in process context from prequeue
2388 packet headers predicted
353 packets header predicted and directly queued to user
908 acknowledgments not containing data payload received
1150 predicted acknowledgments
1 times receiver scheduled too late for direct processing
896 packets collapsed in receive queue due to low socket buffer
2 DSACKs sent for old packets
1 connections reset due to early user close
IpExt:
InMcastPkts: 4229
OutMcastPkts: 58
InBcastPkts: 50
*** Device features:
bond0: 0x1913a9
bond0.10: 0x0
bond0.20: 0x0
bond1: 0x1913a9
bonding_masters:
-- System Information:
Debian Release: 5.0.4
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.26-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.26-2-amd64 recommends no packages.
Versions of packages linux-image-2.6.26-2-amd64 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
Versions of packages linux-image-2.6.26-2-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
-- debconf information:
linux-image-2.6.26-2-amd64/preinst/lilo-has-ramdisk:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-2-amd64/preinst/abort-install-2.6.26-2-amd64:
linux-image-2.6.26-2-amd64/postinst/bootloader-error-2.6.26-2-amd64:
linux-image-2.6.26-2-amd64/postinst/old-initrd-link-2.6.26-2-amd64: true
linux-image-2.6.26-2-amd64/postinst/depmod-error-initrd-2.6.26-2-amd64: false
linux-image-2.6.26-2-amd64/preinst/lilo-initrd-2.6.26-2-amd64: true
linux-image-2.6.26-2-amd64/postinst/depmod-error-2.6.26-2-amd64: false
linux-image-2.6.26-2-amd64/postinst/bootloader-test-error-2.6.26-2-amd64:
linux-image-2.6.26-2-amd64/postinst/old-dir-initrd-link-2.6.26-2-amd64: true
linux-image-2.6.26-2-amd64/preinst/overwriting-modules-2.6.26-2-amd64: true
linux-image-2.6.26-2-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.26-2-amd64/preinst/failed-to-move-modules-2.6.26-2-amd64:
linux-image-2.6.26-2-amd64/postinst/create-kimage-link-2.6.26-2-amd64: true
linux-image-2.6.26-2-amd64/prerm/would-invalidate-boot-loader-2.6.26-2-amd64:
true
linux-image-2.6.26-2-amd64/postinst/old-system-map-link-2.6.26-2-amd64: true
linux-image-2.6.26-2-amd64/preinst/abort-overwrite-2.6.26-2-amd64:
linux-image-2.6.26-2-amd64/preinst/bootloader-initrd-2.6.26-2-amd64: true
linux-image-2.6.26-2-amd64/preinst/elilo-initrd-2.6.26-2-amd64: true
linux-image-2.6.26-2-amd64/preinst/initrd-2.6.26-2-amd64:
linux-image-2.6.26-2-amd64/prerm/removing-running-kernel-2.6.26-2-amd64: true
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
