Package: installation-reports
Debian-installer-version: <Debian GNU/Linux 3.1 r0a
"Sarge" - Official amd64 13-Jun-2005>
uname -a: <2.6.8-11-amd64-k8>
Date: < 3 -Aug- 2005 >
/ethod: <installed from CD iso image downloaded from
http://cdimage.debian.org/cdimage/unofficial/sarge-amd64/
Machine: <Description of machine (eg, IBM Thinkpad R32)>
Processor: AMD Athlon 64 3000+
Memory: 512+512 MB
Root Device: <S-ATA Western Digital WD1600JD 160GB>
Root Size/partition table:
# <file system> <mount point> <type> <options> <dump>
<pass>
proc /proc proc defaults 0 0
/dev/sda1 / ext3 defaults,errors=remount-ro 0 1
/dev/sda9 /home ext3 defaults 0 2
/dev/sda8 /tmp ext3 defaults 0 2
/dev/sda5 /usr ext3 defaults 0 2
/dev/sda6 /var ext3 defaults 0 2
/dev/sda7 none swap sw 0 0.
Device Boot Start End Blocks Id System
/dev/sda1 * 1 61 489951 83 Linux
/dev/sda2 62 10942 87401632+ 5 Extended
/dev/sda3 10943 19457 68396737+ 83 Linux
/dev/sda5 62 790 5855661 83 Linux
/dev/sda6 791 1276 3903763+ 83 Linux
/dev/sda7 1277 1604 2634628+ 82 Linux swap
/dev/sda8 1605 1701 779121 83 Linux
/dev/sda9 1702 1823 979933+ 83 Linux
/dev/sda10 1824 1945 979933+ 83 Linux
/dev/sda11 1946 10455 68356543+ 83 Linux
/dev/sda12 10456 10577 979933+ 83 Linux
/dev/sda13 10578 10942 2931831 83 Linux
Output of lspci and lspci -n:
0000:00:00.0 Memory controller: nVidia Corporation:
Unknown device 005e (rev a3)0000:00:01.0 ISA bridge:
nVidia Corporation: Unknown device 0050 (rev a3)
0000:00:01.1 SMBus: nVidia Corporation: Unknown device
0052 (rev a2)
0000:00:02.0 USB Controller: nVidia Corporation: Unknown
device 005a (rev a2)
0000:00:02.1 USB Controller: nVidia Corporation: Unknown
device 005b (rev a3)
0000:00:04.0 Multimedia audio controller: nVidia
Corporation: Unknown device 0059 (rev a2)
0000:00:06.0 IDE interface: nVidia Corporation: Unknown
device 0053 (rev a2)
0000:00:07.0 IDE interface: nVidia Corporation: Unknown
device 0054 (rev a3)
0000:00:08.0 IDE interface: nVidia Corporation: Unknown
device 0055 (rev a3)
0000:00:09.0 PCI bridge: nVidia Corporation: Unknown
device 005c (rev a2)
0000:00:0a.0 Bridge: nVidia Corporation: Unknown device
0057 (rev a3)
0000:00:0b.0 PCI bridge: nVidia Corporation: Unknown
device 005d (rev a3)
0000:00:0c.0 PCI bridge: nVidia Corporation: Unknown
device 005d (rev a3)
0000:00:0d.0 PCI bridge: nVidia Corporation: Unknown
device 005d (rev a3)
0000:00:0e.0 PCI bridge: nVidia Corporation: Unknown
device 005d (rev a3)
0000:01:08.0 Network controller: Cologne Chip Designs GmbH
ISDN network controller [HFC-PCI] (rev 02)
0000:01:0a.0 FireWire (IEEE 1394): Texas Instruments
TSB82AA2 IEEE-1394b Link Layer Controller (rev 01)
0000:05:00.0 VGA compatible controller: nVidia
Corporation: Unknown device 00fc (rev a2)
0000:00:00.0 0580: 10de:005e (rev a3)
0000:00:01.0 0601: 10de:0050 (rev a3)
0000:00:01.1 0c05: 10de:0052 (rev a2)
0000:00:02.0 0c03: 10de:005a (rev a2)
0000:00:02.1 0c03: 10de:005b (rev a3)
0000:00:04.0 0401: 10de:0059 (rev a2)
0000:00:06.0 0101: 10de:0053 (rev a2)
0000:00:07.0 0101: 10de:0054 (rev a3)
0000:00:08.0 0101: 10de:0055 (rev a3)
0000:00:09.0 0604: 10de:005c (rev a2)
0000:00:0a.0 0680: 10de:0057 (rev a3)
0000:00:0b.0 0604: 10de:005d (rev a3)
0000:00:0c.0 0604: 10de:005d (rev a3)
0000:00:0d.0 0604: 10de:005d (rev a3)
0000:00:0e.0 0604: 10de:005d (rev a3)
0000:01:08.0 0280: 1397:2bd0 (rev 02)
0000:01:0a.0 0c00: 104c:8025 (rev 01)
0000:05:00.0 0300: 10de:00fc (rev a2)
[O] = OK, [E] = Error (please elaborate below), [ ] =
didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
during "expert" installation, I select
Language: English
Country: Europe, Italy
Keyboard: USB (but with Italian layout)
The keyboard layout during the password-setting is strange
(it is latin but not Italian)
It is very dangerous because root password are NOT
visible!
During X-config I can select another Keyboard Layout (for
X)
and after reboot it alert me that:
The X system keyboard settings differ from your current
Gnome keyboard settings.
from dmesg
input: ORTEK ORTEK USB Keyboard V1.2 on
usb-0000:00:02.0-10
bye
Fabuio
------------------------------------
Mai più spam e virus nelle tue mail... con Sicurito!
Provalo gratis su http://www.sicurito.it
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
