Package: linux-image-2.6.30-2-amd64
Severity: normal
I might not know much about this, but I suspect this is some kind of regression
involving a number of HDA chips. I read numerous reports of people using HDA
with now-missing audio controls.
The controls used to be identified differently, and there used to be more
controls. The speakers also used to mute when I plugged in headphones, and
unmute when I unplugged the headphones. This no longer works.
I've tried changing the module model options (model=testing, etc.) with no
success. Still the same controls missing.
Previous kernels do not exhibit this behaviour; Controls show up as expected,
the system identifies when headphones are plugged/unplugged and acts
accordingly.
I'm not sure if it is relevent or not, but "cat /proc/asound/card0/codec#0 |
grep Codec" used to report "Conexant CX20549 (Venice)", but now reports
"Conexant ID 5045".
I figured my issue was similar enough to the previously reported one that they
were likely related.
Steve
-- Package-specific info:
** Version:
Linux version 2.6.30-2-amd64 (Debian 2.6.30-8) (wa...@debian.org) (gcc version
4.3.4 (Debian 4.3.4-3) ) #1 SMP Fri Sep 25 22:16:56 UTC 2009
** Command line:
root=/dev/sda5 ro quiet vga=791
** Tainted: P (1)
** Kernel log:
[ 6.885153] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
[ 6.885158] ACPI: Sleep Button [SLPB]
[ 6.885249] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
[ 6.887882] ACPI: Lid Switch [LID]
[ 6.895157] ACPI: AC Adapter [ACAD] (on-line)
[ 7.179679] ACPI: Battery Slot [BAT0] (battery present)
[ 7.719051] k8temp 0000:00:18.3: Temperature readouts might be wrong - check
erratum #141
[ 7.753085] cfg80211: Using static regulatory domain info
[ 7.753089] cfg80211: Regulatory domain: US
[ 7.753099] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
[ 7.753103] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 7.753107] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.753110] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.753114] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.753117] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.753121] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 7.753129] cfg80211: Calling CRDA for country: US
[ 7.859710] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps:
0xa04713/0x200000
[ 7.920184] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input7
[ 8.717551] nvidia: module license 'NVIDIA' taints kernel.
[ 8.717556] Disabling lock debugging due to kernel taint
[ 8.741409] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040
[ 8.741443] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000
[ 8.976650] nvidia 0000:00:05.0: setting latency timer to 64
[ 8.977004] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.36 Fri
Aug 14 17:35:21 PDT 2009
[ 9.087879] b43-phy0: Broadcom 4311 WLAN found (core revision 10)
[ 9.222132] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 9.222140] alloc irq_desc for 21 on cpu 0 node 0
[ 9.222143] alloc kstat_irqs on cpu 0 node 0
[ 9.222159] HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 21
(level, high) -> IRQ 21
[ 9.222222] HDA Intel 0000:00:10.1: setting latency timer to 64
[ 9.258033] phy0: Selected rate control algorithm 'minstrel'
[ 9.258933] Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]
[ 10.629160] Adding 2353512k swap on /dev/sda2. Priority:-1 extents:1
across:2353512k
[ 10.831728] EXT3 FS on sda5, internal journal
[ 11.059082] loop: module loaded
[ 13.130411] kjournald starting. Commit interval 5 seconds
[ 13.130792] EXT3 FS on sda10, internal journal
[ 13.130798] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.156432] kjournald starting. Commit interval 5 seconds
[ 13.156829] EXT3 FS on sda8, internal journal
[ 13.156834] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.173769] kjournald starting. Commit interval 5 seconds
[ 13.174752] EXT3 FS on sda7, internal journal
[ 13.174757] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.193972] kjournald starting. Commit interval 5 seconds
[ 13.194378] EXT3 FS on sda9, internal journal
[ 13.194383] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.219148] kjournald starting. Commit interval 5 seconds
[ 13.219550] EXT3 FS on sda6, internal journal
[ 13.219555] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.494229] kjournald starting. Commit interval 5 seconds
[ 13.494618] EXT3 FS on sda11, internal journal
[ 13.494624] EXT3-fs: mounted filesystem with ordered data mode.
[ 18.226776] fuse init (API version 7.11)
[ 19.783263] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology
TL-50 processors (2 cpu cores) (version 2.20.00)
[ 19.783329] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x13
[ 19.783334] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x1e
[ 20.001036] Clocksource tsc unstable (delta = -62834096 ns)
[ 32.750057] Bluetooth: Core ver 2.15
[ 32.751339] NET: Registered protocol family 31
[ 32.751346] Bluetooth: HCI device and connection manager initialized
[ 32.751355] Bluetooth: HCI socket layer initialized
[ 32.776697] Bluetooth: L2CAP ver 2.13
[ 32.776704] Bluetooth: L2CAP socket layer initialized
[ 32.815708] Bluetooth: RFCOMM socket layer initialized
[ 32.815736] Bluetooth: RFCOMM TTY layer initialized
[ 32.815741] Bluetooth: RFCOMM ver 1.11
[ 32.868834] Bluetooth: SCO (Voice Link) ver 0.6
[ 32.868838] Bluetooth: SCO socket layer initialized
[ 32.906454] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 32.906458] Bluetooth: BNEP filters: protocol multicast
[ 32.987429] Bridge firewalling registered
[ 37.519905] lp: driver loaded but no devices found
[ 37.549055] ppdev: user-space parallel port driver
[ 43.446392] eth1: no link during initialization.
[ 43.447241] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 43.702441] input: b43-phy0 as /devices/virtual/input/input8
[ 43.748050] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 44.341767] b43 ssb0:0: firmware: requesting b43/pcm5.fw
[ 45.693358] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
[ 45.712442] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
[ 45.880050] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 45.964673] Registered led device: b43-phy0::tx
[ 45.964730] Registered led device: b43-phy0::rx
[ 45.964788] Registered led device: b43-phy0::radio
[ 45.992053] b43-phy0: Radio turned on by software
[ 45.992736] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 46.800595] wlan0: direct probe to AP 00:02:2d:aa:61:a5 try 1
[ 47.004035] wlan0: direct probe to AP 00:02:2d:aa:61:a5 try 2
[ 47.204053] wlan0: direct probe to AP 00:02:2d:aa:61:a5 try 3
[ 47.404053] wlan0: direct probe to AP 00:02:2d:aa:61:a5 timed out
[ 95.576285] wlan0: authenticate with AP 00:21:29:d8:a7:1f
[ 95.577951] wlan0: authenticated
[ 95.577960] wlan0: associate with AP 00:21:29:d8:a7:1f
[ 95.580391] wlan0: RX AssocResp from 00:21:29:d8:a7:1f (capab=0x431 status=0
aid=2)
[ 95.580399] wlan0: associated
[ 95.581882] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 97.659920] Intel AES-NI instructions are not detected.
[ 106.457048] wlan0: no IPv6 routers present
** Loaded modules:
Module Size Used by
cryptd 7352 0
aes_x86_64 8928 2
aes_generic 27840 1 aes_x86_64
rfkill_input 6720 0
ppdev 7784 0
lp 10612 0
parport 38224 2 ppdev,lp
bridge 48240 0
stp 2868 1 bridge
bnep 13792 2
sco 10980 2
rfcomm 35984 0
l2cap 21104 6 bnep,rfcomm
bluetooth 55108 6 bnep,sco,rfcomm,l2cap
powernow_k8 14084 1
cpufreq_stats 4660 0
cpufreq_powersave 1792 0
cpufreq_conservative 7928 0
cpufreq_userspace 3652 0
binfmt_misc 9292 1
fuse 54768 1
loop 15980 0
firewire_sbp2 15440 0
arc4 2048 2
ecb 3072 2
snd_hda_intel 26680 4
snd_hda_codec 75248 1 snd_hda_intel
snd_hwdep 8152 1 snd_hda_codec
snd_pcm_oss 37200 0
snd_mixer_oss 15072 1 snd_pcm_oss
snd_pcm 78472 4 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 6976 0
snd_rawmidi 23008 1 snd_seq_midi
snd_seq_midi_event 7712 1 snd_seq_midi
b43 122296 0
rfkill 12116 3 rfkill_input,b43
snd_seq 51376 2 snd_seq_midi,snd_seq_midi_event
rng_core 4872 1 b43
mac80211 161424 1 b43
snd_timer 21824 3 snd_pcm,snd_seq
joydev 11072 0
i2c_nforce2 7864 0
nvidia 10308904 39
k8temp 5152 0
snd_seq_device 7476 3 snd_seq_midi,snd_rawmidi,snd_seq
cfg80211 65464 2 b43,mac80211
i2c_core 25456 2 i2c_nforce2,nvidia
snd 63912 16
snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 7984 1 snd
psmouse 42172 0
snd_page_alloc 9984 2 snd_hda_intel,snd_pcm
battery 7840 0
ac 3872 0
evdev 10448 21
button 6512 0
wmi 7488 0
input_polldev 4544 1 b43
serio_raw 5844 0
processor 40208 1 powernow_k8
ext3 122848 7
jbd 48152 1 ext3
mbcache 8804 1 ext3
sd_mod 33736 9
crc_t10dif 2096 1 sd_mod
ide_cd_mod 29048 0
cdrom 34344 1 ide_cd_mod
ide_pci_generic 4964 0
ata_generic 5924 0
amd74xx 6872 0
sata_nv 24952 8
sdhci_pci 8160 0
firewire_ohci 22356 0
firewire_core 44980 2 firewire_sbp2,firewire_ohci
crc_itu_t 2720 1 firewire_core
sdhci 17604 1 sdhci_pci
ricoh_mmc 4272 0
mmc_core 55472 1 sdhci
led_class 5048 2 b43,sdhci
libata 175660 2 ata_generic,sata_nv
ide_core 104976 3 ide_cd_mod,ide_pci_generic,amd74xx
ssb 43808 1 b43
scsi_mod 158768 3 firewire_sbp2,sd_mod,libata
ohci_hcd 22812 0
pcmcia 27640 2 b43,ssb
pcmcia_core 37108 3 b43,ssb,pcmcia
forcedeth 52668 0
video 21884 0
output 3472 1 video
ehci_hcd 33996 0
nvidiafb 39664 0
vgastate 7824 1 nvidiafb
thermal 15936 0
fan 5240 0
thermal_sys 16448 4 processor,video,thermal,fan
dm_mirror 14648 0
dm_region_hash 12736 1 dm_mirror
dm_log 9924 2 dm_mirror,dm_region_hash
dm_mod 59384 2 dm_mirror,dm_log
** PCI devices:
00:00.0 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02f0] (rev
a2)
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:00.1 RAM memory [0500]: nVidia Corporation C51 Memory Controller 0
[10de:02fa] (rev a2)
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:00.2 RAM memory [0500]: nVidia Corporation C51 Memory Controller 1
[10de:02fe] (rev a2)
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:00.3 RAM memory [0500]: nVidia Corporation C51 Memory Controller 5
[10de:02f8] (rev a2)
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:00.4 RAM memory [0500]: nVidia Corporation C51 Memory Controller 4
[10de:02f9] (rev a2)
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.5 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02ff] (rev
a2)
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:00.6 RAM memory [0500]: nVidia Corporation C51 Memory Controller 3
[10de:027f] (rev a2)
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:00.7 RAM memory [0500]: nVidia Corporation C51 Memory Controller 2
[10de:027e] (rev a2)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:02.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge
[10de:02fc] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: b4000000-b5ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:03.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge
[10de:02fd] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: b6000000-b7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:05.0 VGA compatible controller [0300]: nVidia Corporation C51 [Geforce Go
6150] [10de:0244] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: Memory at b2000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at b1000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at 50000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
00:09.0 RAM memory [0500]: nVidia Corporation MCP51 Host Bridge [10de:0270]
(rev a2)
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:0a.0 ISA bridge [0601]: nVidia Corporation MCP51 LPC Bridge [10de:0260] (rev
a3)
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: I/O ports at 1d00 [size=128]
00:0a.1 SMBus [0c05]: nVidia Corporation MCP51 SMBus [10de:0264] (rev a3)
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 4: I/O ports at 3040 [size=64]
Region 5: I/O ports at 3000 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
00:0a.3 Co-processor [0b40]: nVidia Corporation MCP51 PMU [10de:0271] (rev a3)
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 10
Region 0: Memory at b0040000 (32-bit, non-prefetchable) [size=256K]
00:0b.0 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller
[10de:026d] (rev a3) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at b0004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:0b.1 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller
[10de:026e] (rev a3) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at b0005000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:0d.0 IDE interface [0101]: nVidia Corporation MCP51 IDE [10de:0265] (rev f1)
(prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at 3080 [size=16]
Capabilities: <access denied>
Kernel driver in use: AMD_IDE
00:0e.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller
[10de:0266] (rev f1) (prog-if 85 [Master SecO PriO])
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at 30c0 [size=8]
Region 1: I/O ports at 30b4 [size=4]
Region 2: I/O ports at 30b8 [size=8]
Region 3: I/O ports at 30b0 [size=4]
Region 4: I/O ports at 3090 [size=16]
Region 5: Memory at b0006000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
00:10.0 PCI bridge [0604]: nVidia Corporation MCP51 PCI Bridge [10de:026f] (rev
a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=64
Memory behind bridge: b8000000-b80fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR+
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:10.1 Audio device [0403]: nVidia Corporation MCP51 High Definition Audio
[10de:026c] (rev a2)
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:14.0 Bridge [0680]: nVidia Corporation MCP51 Ethernet Controller [10de:0269]
(rev a3)
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at b0008000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 30e0 [size=8]
Capabilities: <access denied>
Kernel driver in use: forcedeth
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
03:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN
[14e4:4311] (rev 01)
Subsystem: Hewlett-Packard Company BCM4311 802.11b/g Wireless LAN
Controller [103c:1363]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at b6000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: b43-pci-bridge
07:05.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller
[1180:0832] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at b8000000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
07:05.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro
Host Adapter [1180:0822] (rev 19)
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin B routed to IRQ 7
Region 0: Memory at b8000800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
07:05.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller
[1180:0843] (rev 0a)
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 11
Region 0: Memory at b8000c00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ricoh-mmc
07:05.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host
Adapter [1180:0592] (rev 05)
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 11
Region 0: Memory at b8001000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
07:05.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller
[1180:0852] (rev ff) (prog-if ff)
!!! Unknown header type 7f
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.30-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.30-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.27 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs
ii module-init-tools 3.10-3 tools for managing Linux kernel mo
linux-image-2.6.30-2-amd64 recommends no packages.
Versions of packages linux-image-2.6.30-2-amd64 suggests:
ii grub 0.97-55 GRand Unified Bootloader (dummy pa
ii grub-legacy [grub] 0.97-59 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.30 <none> (no description available)
-- debconf information excluded
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
