OK,
I'm afraid that I've not got access to that source. But I've tried to
compile a file test4.c containing:
volatile int cnt;
int main() {
while (1) cnt++;
return 0;
}
Using a similar commandline:
avr-gcc -DMASTER -Wall -Wstrict-prototypes -g2 -Os -mmcu=atmega128
-mno-tablejump -fpack-struct -fno-common -gdwarf-2 -mcall-prologues
-DSTACK_OVERFLOW_CHECK -D'FIRMWARE_BACKUP_START=(0x10000L)'
-D'FIRMWARE_BACKUP_END=((0x10000L + (0xE000L - 0L)))'
-D'FIRMWARE_START=(0L)' -D'FIRMWARE_END=(0xE000L)'
-D'BOOTLOADER_START=(0x1E000L)' -D'BOOTLOADER_END=(0x1FC00L)'
-I/srv/home/michael/Projects/rtm/rtm5101
-I/srv/home/michael/Projects/rtm/rtm5101/include -c -o test4.o test4.c
avr-ld -mavr5 test4.o /usr/lib/gcc/avr/4.3.4/avr51/libgcc.a -o firmware.elf
and that works just fine here. Could you verify that this is working
for you too. If thats the case, the problem is most likely in the
linker script /srv/home/michael/Projects/rtm/rtm5101/hal/atmega128.lds,
which might have to be updated...
On Thu, Nov 5, 2009 at 6:10 AM, Michael Ott <mich...@king-coder.de> wrote:
> Hello Hakan!
>
>> what are you trying to compile?
> From Pigeon Point: BMR-AVR-AMCm 2.0.0
>
>> > Package: binutils-avr
>> > Version: 2.20-1
>> > Severity: grave
>> > Justification: renders package unusable
>> >
>> > Compile PPS source code
>> >
>> > Get the following errors:
>> > avr-gcc -DMASTER -Wall -Wstrict-prototypes -g2 -Os -mmcu=atmega128
>> > -mno-tablejump -fpack-struct -fno-common -gdwarf-2 -mcall-prologues
>> > -DSTACK_OVERFLOW_CHECK -D'FIRMWARE_BACKUP_START=(0x10000L)'
>> > -D'FIRMWARE_BACKUP_END=((0x10000L + (0xE000L - 0L)))'
>> > -D'FIRMWARE_START=(0L)' -D'FIRMWARE_END=(0xE000L)'
>> > -D'BOOTLOADER_START=(0x1E000L)' -D'BOOTLOADER_END=(0x1FC00L)'
>> > -I/srv/home/michael/Projects/rtm/rtm5101
>> > -I/srv/home/michael/Projects/rtm/rtm5101/include -c -o hal.o hal.c
>> > echo "SECTIONS { .sdr.file : { sdr_file_start = .; \
>> > *(.data) sdr_file_end = .; }}" > sdr-data.o.lds
>> > avr-ld -mavr5 -r -o sdr-data.o -b binary
>> > "/srv/home/michael/Projects/rtm/rtm5101/sdr-data.bin" -b elf32-avr -T
>> > sdr-data.o.lds
>> > rm -f sdr-data.o.lds
>> > avr-ld -mavr5 -T/srv/home/michael/Projects/rtm/rtm5101/hal/atmega128.lds
>> > -\( init.o hal.o sdr-data.o libhal.o ../app/libapp.o ../lib/lib.a
>> > ../app/libcompat/libcompat.a -\) \
>> > /usr/lib/gcc/avr/4.3.4/avr51/libgcc.a -o firmware.elf
>> > avr-ld: avr:51 architecture of input file `init.o' is incompatible with
>> > avr output
>> > avr-ld: avr:51 architecture of input file `hal.o' is incompatible with avr
>> > output
>> > avr-ld: avr:51 architecture of input file `../lib/lib.a(checksum.o)' is
>> > incompatible with avr output
>> > avr-ld: avr:51 architecture of input file `../lib/lib.a(memcmp.o)' is
>> > incompatible with avr output
>> > avr-ld: avr:51 architecture of input file `../lib/lib.a(memcmp_P.o)' is
>> > incompatible with avr output
>> > avr-ld: avr:51 architecture of input file `../lib/lib.a(memcpy.o)' is
>> > incompatible with avr output
>> > avr-ld: avr:51 architecture of input file `../lib/lib.a(memcpy_P.o)' is
>> > incompatible with avr output
>> > avr-ld: avr:51 architecture of input file `../lib/lib.a(memcpy_P_far.o)'
>> > is incompatible with avr output
>> > avr-ld: avr:51 architecture of input file `../lib/lib.a(memset.o)' is
>> > incompatible with avr output
>> > avr-ld: avr:51 architecture of input file `../lib/lib.a(parse_tm.o)' is
>> > incompatible with avr output
>> > avr-ld: avr:51 architecture of input file `../lib/lib.a(hex2int.o)' is
>> > incompatible with avr output
>> > make[1]: *** [firmware.elf] Error 1
>> > make[1]: Leaving directory `/srv/home/michael/Projects/rtm/rtm5101/hal'
>> > make: *** [all] Error 2
>> >
>> > Works with testing version of binutils-avr
>> >
>> >
>> >
>> > -- System Information:
>> > Debian Release: squeeze/sid
>> > APT prefers unstable
>> > APT policy: (700, 'unstable'), (650, 'testing'), (600, 'stable'), (1,
>> > 'experimental')
>> > Architecture: i386 (i686)
>> >
>> > Kernel: Linux 2.6.30-2-686 (SMP w/1 CPU core)
>> > Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
>> > Shell: /bin/sh linked to /bin/dash
>> >
>> > Versions of packages binutils-avr depends on:
>> > ii libc6 2.10.1-5 GNU C Library: Shared
>> > libraries
>> > ii zlib1g 1:1.2.3.3.dfsg-15 compression library - runtime
>> >
>> > binutils-avr recommends no packages.
>> >
>> > Versions of packages binutils-avr suggests:
>> > ii binutils 2.20-2 The GNU assembler, linker and
>> > bina
>> >
>> > -- no debconf information
>> >
>> >
>> >
>>
>>
>>
>> --
>> Håkan Ardö
> CU
>
> Michael
>
> --
> ,''`.
> : :' : Michael Ott
> `. `' e-mail: michael at king-coder dot de
> `-
>
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.10 (GNU/Linux)
>
> iEYEARECAAYFAkryXi4ACgkQC3RUCgaMhSwhNwCdHHtwATcocN3V2WG52nZ2JQzl
> UzwAn0q764v3s5H+w8fjNBRZ6oSMeSo5
> =7cwb
> -----END PGP SIGNATURE-----
>
>
--
Håkan Ardö
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
