2009/10/16 Julien Cristau <jcris...@debian.org>:
> On Fri, 2009-10-16 at 09:33 +0200, Sven Reckziegel wrote:
>> Package: xserver-xorg
>> Version: 1:7.4+4
>>
>> X server crashed about 5-15 minutes after logging in.
>>
>> Looks like the same as bug 546455
>>
>> Occurs only once and always simultaneous with a keyboard input.
>
> You didn't attach your X log from the crash...
>
> Cheers,
> Julien
>
>
Below is the Xorg.0.log ( there are no information about the crash in
this log) and the messages (crash occurs at 08:57:51 with reload
agpart-via.
---- XORG.LOG ----
X.Org X Server 1.6.4
Release Date: 2009-9-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31 i686 Debian
Current Operating System: Linux peitsche 2.6.29-rt3.sr.8 #2 SMP
PREEMPT RT Mon Sep 28 22:48:24 CEST 2009 i686
Build Date: 30 September 2009 08:45:15PM
xorg-server 2:1.6.4-2 (bgog...@debian.org)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 16 08:57:50 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or
'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x6c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0:1:0:0) 10de:02e1:1462:0640 nVidia Corporation G73
[GeForce 7600 GS] rev 162, Mem @ 0xfd000000/16777216,
0xa0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[30] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[31] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[33] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[35] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 185.18.36 Fri Aug 14 17:50:12 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 185.18.36 Fri Aug 14 17:24:40 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 0...@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[30] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[31] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[33] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[35] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 7600 GS (G73) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 05.73.22.33.00
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 7600 GS at PCI:1:0:0:
(--) NVIDIA(0): Samsung SyncMaster (DFP-0)
(--) NVIDIA(0): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Dual Link TMDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(==) NVIDIA(0):
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0): will be used as the requested mode.
(==) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
(--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[30] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[31] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[33] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[35] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) Initializing extension GLX
(II) config/hal: Adding input device Apple, Inc Apple Keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Apple, Inc Apple Keyboard: always reports core events
(**) Apple, Inc Apple Keyboard: Device: "/dev/input/event1"
(II) Apple, Inc Apple Keyboard: Found keys
(II) Apple, Inc Apple Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Apple, Inc Apple Keyboard"
(type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) config/hal: Adding input device Apple, Inc Apple Keyboard
(**) Apple, Inc Apple Keyboard: always reports core events
(**) Apple, Inc Apple Keyboard: Device: "/dev/input/event0"
(II) Apple, Inc Apple Keyboard: Found keys
(II) Apple, Inc Apple Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Apple, Inc Apple Keyboard"
(type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event3"
(II) Logitech USB Receiver: Found 1 mouse buttons
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as keyboard
(II) Logitech USB Receiver: Adding scrollwheel support
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver"
(type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(EE) Logitech USB Receiver: failed to initialize for relative axes.
(II) config/hal: Adding input device Sleep Button (CM)
(**) Sleep Button (CM): always reports core events
(**) Sleep Button (CM): Device: "/dev/input/event6"
(II) Sleep Button (CM): Found keys
(II) Sleep Button (CM): Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button (CM)" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) config/hal: Adding input device Power Button (CM)
(**) Power Button (CM): always reports core events
(**) Power Button (CM): Device: "/dev/input/event5"
(II) Power Button (CM): Found keys
(II) Power Button (CM): Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button (CM)" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) config/hal: Adding input device Power Button (FF)
(**) Power Button (FF): always reports core events
(**) Power Button (FF): Device: "/dev/input/event4"
(II) Power Button (FF): Found keys
(II) Power Button (FF): Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button (FF)" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event2"
(II) Logitech USB Receiver: Found 20 mouse buttons
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Configuring as mouse
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
(**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
(**) Logitech USB Receiver: (accel) filter chain progression: 2.00
(**) Logitech USB Receiver: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Receiver: (accel) set acceleration profile 0
(II) Logitech USB Receiver: initialized for relative axes.
----- messages LOG -----
08:29:13 kernel: [ 0.000000] Initializing cgroup subsys cpuset
08:29:13 kernel: [ 0.000000] Initializing cgroup subsys cpu
08:29:13 kernel: [ 0.000000] Linux version 2.6.29-rt3.sr.8
(r...@peitsche) (gcc version 4.3.4 (Debian 4.3.4-2) ) #2 SMP PREEMPT
RT Mon Sep 28 22:48:24 CEST 2009
08:29:13 kernel: [ 0.000000] KERNEL supported cpus:
08:29:13 kernel: [ 0.000000] Intel GenuineIntel
08:29:13 kernel: [ 0.000000] AMD AuthenticAMD
08:29:13 kernel: [ 0.000000] NSC Geode by NSC
08:29:13 kernel: [ 0.000000] Cyrix CyrixInstead
08:29:13 kernel: [ 0.000000] Centaur CentaurHauls
08:29:13 kernel: [ 0.000000] Transmeta GenuineTMx86
08:29:13 kernel: [ 0.000000] Transmeta TransmetaCPU
08:29:13 kernel: [ 0.000000] UMC UMC UMC UMC
08:29:13 kernel: [ 0.000000] BIOS-provided physical RAM map:
08:29:13 kernel: [ 0.000000] BIOS-e820: 0000000000000000 -
000000000009fc00 (usable)
08:29:13 kernel: [ 0.000000] BIOS-e820: 000000000009fc00 -
00000000000a0000 (reserved)
08:29:13 kernel: [ 0.000000] BIOS-e820: 00000000000e4000 -
0000000000100000 (reserved)
08:29:13 kernel: [ 0.000000] BIOS-e820: 0000000000100000 -
000000005ff40000 (usable)
08:29:13 kernel: [ 0.000000] BIOS-e820: 000000005ff40000 -
000000005ff50000 (ACPI data)
08:29:13 kernel: [ 0.000000] BIOS-e820: 000000005ff50000 -
0000000060000000 (ACPI NVS)
08:29:13 kernel: [ 0.000000] BIOS-e820: 00000000ff7c0000 -
0000000100000000 (reserved)
08:29:13 kernel: [ 0.000000] DMI 2.3 present.
08:29:13 kernel: [ 0.000000] AMI BIOS detected: BIOS may corrupt
low RAM, working around it.
08:29:13 kernel: [ 0.000000] last_pfn = 0x5ff40 max_arch_pfn = 0x100000
08:29:13 kernel: [ 0.000000] x86 PAT enabled: cpu 0, old
0x7040600070406, new 0x7010600070106
08:29:13 kernel: [ 0.000000] init_memory_mapping:
0000000000000000-00000000377fe000
08:29:13 kernel: [ 0.000000] RAMDISK: 37601000 - 37fef220
08:29:13 kernel: [ 0.000000] Allocated new RAMDISK: 0056c000 - 00f5a220
08:29:13 kernel: [ 0.000000] Move RAMDISK from 0000000037601000 -
0000000037fef21f to 0056c000 - 00f5a21f
08:29:13 kernel: [ 0.000000] ACPI: RSDP 000F9190, 0021 (r2 ACPIAM)
08:29:13 kernel: [ 0.000000] ACPI: XSDT 5FF40100, 003C (r1 A M I
OEMXSDT 1000602 MSFT 97)
08:29:13 kernel: [ 0.000000] ACPI: FACP 5FF40200, 00F4 (r3 A M I
OEMFACP 1000602 MSFT 97)
08:29:13 kernel: [ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16)
does not match PM1_EVT_LEN (4)
08:29:13 kernel: [ 0.000000] ACPI: DSDT 5FF40350, 373D (r1 A0008
A0008705 705 INTL 2002026)
08:29:13 kernel: [ 0.000000] ACPI: FACS 5FF50000, 0040
08:29:13 kernel: [ 0.000000] ACPI: APIC 5FF40300, 004A (r1 A M I
OEMAPIC 1000602 MSFT 97)
08:29:13 kernel: [ 0.000000] ACPI: OEMB 5FF50040, 003F (r1 A M I
OEMBIOS 1000602 MSFT 97)
08:29:13 kernel: [ 0.000000] 647MB HIGHMEM available.
08:29:13 kernel: [ 0.000000] 887MB LOWMEM available.
08:29:13 kernel: [ 0.000000] mapped low ram: 0 - 377fe000
08:29:13 kernel: [ 0.000000] low ram: 0 - 377fe000
08:29:13 kernel: [ 0.000000] node 0 low ram: 00000000 - 377fe000
08:29:13 kernel: [ 0.000000] node 0 bootmap 00011000 - 00017f00
08:29:13 kernel: [ 0.000000] (9 early reservations) ==> bootmem
[0000000000 - 00377fe000]
08:29:13 kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS
data page ==> [0000000000 - 0000001000]
08:29:13 kernel: [ 0.000000] #1 [0000001000 - 0000002000] EX
TRAMPOLINE ==> [0000001000 - 0000002000]
08:29:13 kernel: [ 0.000000] #2 [0000006000 - 0000007000]
TRAMPOLINE ==> [0000006000 - 0000007000]
08:29:13 kernel: [ 0.000000] #3 [0000100000 - 0000568ff8]
TEXT DATA BSS ==> [0000100000 - 0000568ff8]
08:29:13 kernel: [ 0.000000] #4 [000009fc00 - 0000100000]
BIOS reserved ==> [000009fc00 - 0000100000]
08:29:13 kernel: [ 0.000000] #5 [0000569000 - 000056b228]
BRK ==> [0000569000 - 000056b228]
08:29:13 kernel: [ 0.000000] #6 [0000010000 - 0000011000]
PGTABLE ==> [0000010000 - 0000011000]
08:29:13 kernel: [ 0.000000] #7 [000056c000 - 0000f5a220]
NEW RAMDISK ==> [000056c000 - 0000f5a220]
08:29:13 kernel: [ 0.000000] #8 [0000011000 - 0000018000]
BOOTMAP ==> [0000011000 - 0000018000]
08:29:13 kernel: [ 0.000000] found SMP MP-table at [c00ff780] ff780
08:29:13 kernel: [ 0.000000] Zone PFN ranges:
08:29:13 kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000
08:29:13 kernel: [ 0.000000] Normal 0x00001000 -> 0x000377fe
08:29:13 kernel: [ 0.000000] HighMem 0x000377fe -> 0x0005ff40
08:29:13 kernel: [ 0.000000] Movable zone start PFN for each node
08:29:13 kernel: [ 0.000000] early_node_map[2] active PFN ranges
08:29:13 kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f
08:29:13 kernel: [ 0.000000] 0: 0x00000100 -> 0x0005ff40
08:29:13 kernel: [ 0.000000] Using APIC driver default
08:29:13 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808
08:29:13 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01]
lapic_id[0x00] enabled)
08:29:13 kernel: [ 0.000000] ACPI: IOAPIC (id[0x01]
address[0xfec00000] gsi_base[0])
08:29:13 kernel: [ 0.000000] IOAPIC[0]: apic_id 1, version 3,
address 0xfec00000, GSI 0-23
08:29:13 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0
global_irq 2 dfl dfl)
08:29:13 kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
08:29:13 kernel: [ 0.000000] Using ACPI (MADT) for SMP
configuration information
08:29:13 kernel: [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
08:29:13 kernel: [ 0.000000] PM: Registered nosave memory:
000000000009f000 - 00000000000a0000
08:29:13 kernel: [ 0.000000] PM: Registered nosave memory:
00000000000a0000 - 00000000000e4000
08:29:13 kernel: [ 0.000000] PM: Registered nosave memory:
00000000000e4000 - 0000000000100000
08:29:13 kernel: [ 0.000000] Allocating PCI resources starting at
70000000 (gap: 60000000:9f7c0000)
08:29:13 kernel: [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32
nr_cpu_ids:1 nr_node_ids:1
08:29:13 kernel: [ 0.000000] PERCPU: Embedded 11 pages at
c1c13000, static data 22148 bytes
08:29:13 kernel: [ 0.000000] Real-Time Preemption Support (C)
2004-2007 Ingo Molnar
08:29:13 kernel: [ 0.000000] Built 1 zonelists in Zone order,
mobility grouping on. Total pages: 389840
08:29:13 kernel: [ 0.000000] Kernel command line:
root=UUID=8296908e-39a7-451f-a6ba-370ce4e08369 ro
08:29:13 kernel: [ 0.000000] Enabling fast FPU save and restore... done.
08:29:13 kernel: [ 0.000000] Enabling unmasked SIMD FPU exception
support... done.
08:29:13 kernel: [ 0.000000] Initializing CPU#0
08:29:13 kernel: [ 0.000000] Preemptible RCU implementation.
08:29:13 kernel: [ 0.000000] NR_IRQS:1280
08:29:13 kernel: [ 0.000000] PID hash table entries: 4096 (order:
12, 16384 bytes)
08:29:13 kernel: [ 0.000000] Extended CMOS year: 2000
08:29:13 kernel: [ 0.000000] Fast TSC calibration using PIT
08:29:13 kernel: [ 0.000000] Detected 1833.229 MHz processor.
08:29:13 kernel: [ 0.000999] Console: colour VGA+ 80x25
08:29:13 kernel: [ 0.000999] console [tty0] enabled
08:29:13 kernel: [ 0.000999] Dentry cache hash table entries:
131072 (order: 7, 524288 bytes)
08:29:13 kernel: [ 0.000999] Inode-cache hash table entries: 65536
(order: 6, 262144 bytes)
08:29:13 kernel: [ 0.000999] Initializing HighMem for node 0
(000377fe:0005ff40)
08:29:13 kernel: [ 0.000999] Memory: 1542856k/1572096k available
(2250k kernel code, 27924k reserved, 1212k data, 312k init, 662792k
highmem)
08:29:13 kernel: [ 0.000999] virtual kernel memory layout:
08:29:13 kernel: [ 0.000999] fixmap : 0xffe16000 - 0xfffff000
(1956 kB)
08:29:13 kernel: [ 0.000999] pkmap : 0xff800000 - 0xffc00000
(4096 kB)
08:29:13 kernel: [ 0.000999] vmalloc : 0xf7ffe000 - 0xff7fe000
( 120 MB)
08:29:13 kernel: [ 0.000999] lowmem : 0xc0000000 - 0xf77fe000
( 887 MB)
08:29:13 kernel: [ 0.000999] .init : 0xc0467000 - 0xc04b5000
( 312 kB)
08:29:13 kernel: [ 0.000999] .data : 0xc0332b75 - 0xc0461e80
(1212 kB)
08:29:13 kernel: [ 0.000999] .text : 0xc0100000 - 0xc0332b75
(2250 kB)
08:29:13 kernel: [ 0.000999] Checking if this processor honours
the WP bit even in supervisor mode...Ok.
08:29:13 kernel: [ 0.001019] Calibrating delay loop (skipped),
value calculated using timer frequency.. 3666.45 BogoMIPS
(lpj=1833229)
08:29:13 kernel: [ 0.001225] Security Framework initialized
08:29:13 kernel: [ 0.001304] SELinux: Disabled at boot.
08:29:13 kernel: [ 0.001399] Mount-cache hash table entries: 512
08:29:13 kernel: [ 0.001693] Initializing cgroup subsys ns
08:29:13 kernel: [ 0.001767] Initializing cgroup subsys cpuacct
08:29:13 kernel: [ 0.001838] Initializing cgroup subsys devices
08:29:13 kernel: [ 0.001909] Initializing cgroup subsys freezer
08:29:13 kernel: [ 0.002009] Initializing cgroup subsys net_cls
08:29:13 kernel: [ 0.002106] CPU: L1 I Cache: 64K (64 bytes/line),
D cache 64K (64 bytes/line)
08:29:13 kernel: [ 0.002183] CPU: L2 Cache: 256K (64 bytes/line)
08:29:13 kernel: [ 0.002257] Intel machine check architecture supported.
08:29:13 kernel: [ 0.002329] Intel machine check reporting enabled on CPU#0.
08:29:13 kernel: [ 0.002419] Checking 'hlt' instruction... OK.
08:29:13 kernel: [ 0.006346] SMP alternatives: switching to UP code
08:29:13 kernel: [ 0.010071] Freeing SMP alternatives: 10k freed
08:29:13 kernel: [ 0.010161] ACPI: Core revision 20081204
08:29:13 kernel: [ 0.020547] ..TIMER: vector=0x30 apic1=0 pin1=2
apic2=-1 pin2=-1
08:29:13 kernel: [ 0.030652] CPU0: AMD Sempron(tm) 2200+ stepping 01
08:29:13 kernel: [ 0.030995] Brought up 1 CPUs
08:29:13 kernel: [ 0.030995] Total of 1 processors activated
(3666.45 BogoMIPS).
08:29:13 kernel: [ 0.031763] net_namespace: 1132 bytes
08:29:13 kernel: [ 0.031949] Booting paravirtualized kernel on bare hardware
08:29:13 kernel: [ 0.032271] regulator: core version 0.5
08:29:13 kernel: [ 0.032561] NET: Registered protocol family 16
08:29:13 kernel: [ 0.033269] ACPI: bus type pci registered
08:29:13 kernel: [ 0.034073] PCI: PCI BIOS revision 2.10 entry at
0xf0031, last bus=1
08:29:13 kernel: [ 0.034147] PCI: Using configuration type 1 for base access
08:29:13 kernel: [ 0.036349] bio: create slab <bio-0> at 0
08:29:13 kernel: [ 0.046056] ACPI: Interpreter enabled
08:29:13 kernel: [ 0.046135] ACPI: (supports S0 S1 S3 S4 S5)
08:29:13 kernel: [ 0.046478] ACPI: Using IOAPIC for interrupt routing
08:29:13 kernel: [ 0.057911] ACPI: No dock devices found.
08:29:13 kernel: [ 0.058026] ACPI: PCI Root Bridge [PCI0] (0000:00)
08:29:13 kernel: [ 0.058593] pci 0000:00:09.0: PME# supported from
D0 D1 D2 D3hot D3cold
08:29:13 kernel: [ 0.058668] pci 0000:00:09.0: PME# disabled
08:29:13 kernel: [ 0.059068] pci 0000:00:10.0: PME# supported from
D0 D1 D2 D3hot D3cold
08:29:13 kernel: [ 0.059143] pci 0000:00:10.0: PME# disabled
08:29:13 kernel: [ 0.059279] pci 0000:00:10.1: PME# supported from
D0 D1 D2 D3hot D3cold
08:29:13 kernel: [ 0.059353] pci 0000:00:10.1: PME# disabled
08:29:13 kernel: [ 0.059488] pci 0000:00:10.2: PME# supported from
D0 D1 D2 D3hot D3cold
08:29:13 kernel: [ 0.059562] pci 0000:00:10.2: PME# disabled
08:29:13 kernel: [ 0.059698] pci 0000:00:10.4: PME# supported from
D0 D1 D2 D3hot D3cold
08:29:13 kernel: [ 0.059771] pci 0000:00:10.4: PME# disabled
08:29:13 kernel: [ 0.059895] HPET not enabled in BIOS. You might
try hpet=force boot option
08:29:13 kernel: [ 0.059971] pci 0000:00:11.0: Enabled onboard
AC97/MC97 devices
08:29:13 kernel: [ 0.071709] ACPI: PCI Interrupt Link [LNKA] (IRQs
*3 4 5 7 10 11 14 15)
08:29:13 kernel: [ 0.072489] ACPI: PCI Interrupt Link [LNKB] (IRQs
3 4 *5 7 10 11 14 15)
08:29:13 kernel: [ 0.073223] ACPI: PCI Interrupt Link [LNKC] (IRQs
3 4 5 7 10 *11 14 15)
08:29:13 kernel: [ 0.073928] ACPI: PCI Interrupt Link [LNKD] (IRQs
3 4 5 7 *10 11 14 15)
08:29:13 kernel: [ 0.074647] ACPI: PCI Interrupt Link [LNKE] (IRQs
3 4 5 7 10 11 14 15) *0, disabled.
08:29:13 kernel: [ 0.075477] ACPI: PCI Interrupt Link [LNKF] (IRQs
3 4 5 7 10 11 14 15) *0, disabled.
08:29:13 kernel: [ 0.076341] ACPI: PCI Interrupt Link [LNKG] (IRQs
3 4 5 7 10 11 14 15) *0, disabled.
08:29:13 kernel: [ 0.077165] ACPI: PCI Interrupt Link [LNKH] (IRQs
3 4 5 7 10 11 14 15) *0, disabled.
08:29:13 kernel: [ 0.078156] ACPI Warning (tbutils-0242):
Incorrect checksum in table [OEMB] - FA, should be F1 [20081204]
08:29:13 kernel: [ 0.078825] PCI: Using ACPI for IRQ routing
08:29:13 kernel: [ 0.100023] pnp: PnP ACPI init
08:29:13 kernel: [ 0.100114] ACPI: bus type pnp registered
08:29:13 kernel: [ 0.103442] pnp 00:06: io resource (0x10-0x1f)
overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
08:29:13 kernel: [ 0.104512] pnp 00:06: io resource (0x22-0x3f)
overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
08:29:13 kernel: [ 0.104599] pnp 00:06: io resource (0x44-0x5f)
overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
08:29:13 kernel: [ 0.104685] pnp 00:06: io resource (0x62-0x63)
overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
08:29:13 kernel: [ 0.104771] pnp 00:06: io resource (0x65-0x6f)
overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
08:29:13 kernel: [ 0.104857] pnp 00:06: io resource (0x72-0x7f)
overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
08:29:13 kernel: [ 0.104943] pnp 00:06: io resource (0x80-0x80)
overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
08:29:13 kernel: [ 0.105039] pnp 00:06: io resource (0x84-0x86)
overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
08:29:13 kernel: [ 0.105125] pnp 00:06: io resource (0x88-0x88)
overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
08:29:13 kernel: [ 0.105211] pnp 00:06: io resource (0x8c-0x8e)
overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
08:29:13 kernel: [ 0.105297] pnp 00:06: io resource (0x90-0x9f)
overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
08:29:13 kernel: [ 0.105383] pnp 00:06: io resource (0xa2-0xbf)
overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
08:29:13 kernel: [ 0.105469] pnp 00:06: io resource (0xe0-0xef)
overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
08:29:13 kernel: [ 0.108096] pnp: PnP ACPI: found 11 devices
08:29:13 kernel: [ 0.108166] ACPI: ACPI bus type pnp unregistered
08:29:13 kernel: [ 0.108239] PnPBIOS: Disabled by ACPI PNP
08:29:13 kernel: [ 0.108325] system 00:06: ioport range
0x3e0-0x3e7 has been reserved
08:29:13 kernel: [ 0.108399] system 00:06: ioport range
0x4d0-0x4d1 has been reserved
08:29:13 kernel: [ 0.108472] system 00:06: ioport range
0x800-0x87f has been reserved
08:29:13 kernel: [ 0.108545] system 00:06: ioport range
0x400-0x41f has been reserved
08:29:13 kernel: [ 0.108625] system 00:07: iomem range
0xfec80000-0xfec800ff has been reserved
08:29:13 kernel: [ 0.108700] system 00:07: iomem range
0xfec00000-0xfec00fff has been reserved
08:29:13 kernel: [ 0.108775] system 00:07: iomem range
0xfee00000-0xfee00fff has been reserved
08:29:13 kernel: [ 0.108850] system 00:07: iomem range
0xfff80000-0xffffffff has been reserved
08:29:13 kernel: [ 0.108928] system 00:08: ioport range
0x480-0x487 has been reserved
08:29:13 kernel: [ 0.109015] system 00:08: ioport range
0xc00-0xc7f has been reserved
08:29:13 kernel: [ 0.109094] system 00:0a: iomem range 0x0-0x9ffff
could not be reserved
08:29:13 kernel: [ 0.109169] system 00:0a: iomem range
0xc0000-0xdffff could not be reserved
08:29:13 kernel: [ 0.109243] system 00:0a: iomem range
0xe0000-0xfffff could not be reserved
08:29:13 kernel: [ 0.109318] system 00:0a: iomem range
0x100000-0x5fffffff could not be reserved
08:29:13 kernel: [ 0.144855] pci 0000:00:01.0: PCI bridge,
secondary bus 0000:01
08:29:13 kernel: [ 0.144929] pci 0000:00:01.0: IO window: disabled
08:29:13 kernel: [ 0.145011] pci 0000:00:01.0: MEM window:
0xfa100000-0xfe2fffff
08:29:13 kernel: [ 0.145086] pci 0000:00:01.0: PREFETCH window:
0x0000009ff00000-0x000000bfefffff
08:29:13 kernel: [ 0.145298] NET: Registered protocol family 2
08:29:13 kernel: [ 0.180067] IP route cache hash table entries:
32768 (order: 5, 131072 bytes)
08:29:13 kernel: [ 0.180742] TCP established hash table entries:
131072 (order: 8, 1048576 bytes)
08:29:13 kernel: [ 0.183186] TCP bind hash table entries: 65536
(order: 9, 2097152 bytes)
08:29:13 kernel: [ 0.187162] TCP: Hash tables configured
(established 131072 bind 65536)
08:29:13 kernel: [ 0.187241] TCP reno registered
08:29:13 kernel: [ 0.199124] NET: Registered protocol family 1
08:29:13 kernel: [ 0.199296] checking if image is initramfs... it is
08:29:13 kernel: [ 0.850649] Freeing initrd memory: 10168k freed
08:29:13 kernel: [ 0.871978] audit: initializing netlink socket (disabled)
08:29:13 kernel: [ 0.872109] type=2000 audit(1255674249.872:1): initialized
08:29:13 kernel: [ 0.872588] highmem bounce pool size: 64 pages
08:29:13 kernel: [ 0.872663] HugeTLB registered 4 MB page size,
pre-allocated 0 pages
08:29:13 kernel: [ 0.872840] VFS: Disk quotas dquot_6.5.2
08:29:13 kernel: [ 0.872951] Dquot-cache hash table entries: 1024
(order 0, 4096 bytes)
08:29:13 kernel: [ 0.873129] msgmni has been set to 1740
08:29:13 kernel: [ 0.873433] alg: No test for stdrng (krng)
08:29:13 kernel: [ 0.873639] Block layer SCSI generic (bsg) driver
version 0.4 loaded (major 253)
08:29:13 kernel: [ 0.873724] io scheduler noop registered
08:29:13 kernel: [ 0.873791] io scheduler anticipatory registered
08:29:13 kernel: [ 0.873860] io scheduler deadline registered
08:29:13 kernel: [ 0.873939] io scheduler cfq registered (default)
08:29:13 kernel: [ 0.874053] PCI: VIA PCI bridge detected. Disabling DAC.
08:29:13 kernel: [ 0.874208] pci 0000:00:11.0: Bypassing VIA 8237
APIC De-Assert Message
08:29:13 kernel: [ 0.874955] isapnp: Scanning for PnP cards...
08:29:13 kernel: [ 1.231270] isapnp: No Plug & Play device found
08:29:13 kernel: [ 1.236769] Serial: 8250/16550 driver, 4 ports,
IRQ sharing enabled
08:29:13 kernel: [ 1.237058] serial8250: ttyS0 at I/O 0x3f8 (irq =
4) is a 16550A
08:29:13 kernel: [ 1.237812] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
08:29:13 kernel: [ 1.241022] brd: module loaded
08:29:13 kernel: [ 1.241382] PNP: No PS/2 controller found.
Probing ports directly.
08:29:13 kernel: [ 1.243740] serio: i8042 KBD port at 0x60,0x64 irq 1
08:29:13 kernel: [ 1.243818] serio: i8042 AUX port at 0x60,0x64 irq 12
08:29:13 kernel: [ 1.244245] mice: PS/2 mouse device common for all mice
08:29:13 kernel: [ 1.244469] rtc_cmos 00:02: RTC can wake from S4
08:29:13 kernel: [ 1.244670] rtc_cmos 00:02: rtc core: registered
rtc_cmos as rtc0
08:29:13 kernel: [ 1.244834] rtc0: alarms up to one year, y3k, 114
bytes nvram
08:29:13 kernel: [ 1.244987] cpuidle: using governor ladder
08:29:13 kernel: [ 1.245075] cpuidle: using governor menu
08:29:13 kernel: [ 1.245148] No iBFT detected.
08:29:13 kernel: [ 1.245744] TCP cubic registered
08:29:13 kernel: [ 1.245848] NET: Registered protocol family 10
08:29:13 kernel: [ 1.246545] lo: Disabled Privacy Extensions
08:29:13 kernel: [ 1.247191] Mobile IPv6
08:29:13 kernel: [ 1.247258] NET: Registered protocol family 17
08:29:13 kernel: [ 1.247337] Using IPI No-Shortcut mode
08:29:13 kernel: [ 1.247819] registered taskstats version 1
08:29:13 kernel: [ 1.248168] rtc_cmos 00:02: setting system clock
to 2009-10-16 06:24:11 UTC (1255674251)
08:29:13 kernel: [ 1.248318] Freeing unused kernel memory: 312k freed
08:29:13 kernel: [ 1.248925] Write protecting the kernel text: 2252k
08:29:13 kernel: [ 1.249078] Write protecting the kernel read-only
data: 756k
08:29:13 kernel: [ 1.456916] processor ACPI_CPU:00: registered as
cooling_device0
08:29:13 kernel: [ 1.573276] Linux agpgart interface v0.103
08:29:13 kernel: [ 1.582082] agpgart: Detected VIA KT880 chipset
08:29:13 kernel: [ 1.632250] agpgart-via 0000:00:00.0: AGP
aperture is 128M @ 0xe0000000
08:29:13 kernel: [ 1.632886] skge 0000:00:09.0: PCI INT A -> GSI
18 (level, low) -> IRQ 18
08:29:13 kernel: [ 1.632974] skge 0000:00:09.0: PCI: Disallowing
DAC for device
08:29:13 kernel: [ 1.638154] skge 1.13 addr 0xfe900000 irq 18 chip
Yukon-Lite rev 9
08:29:13 kernel: [ 1.642124] skge eth0: addr 00:11:d8:e2:00:f8
08:29:13 kernel: [ 1.703804] Uniform Multi-Platform E-IDE driver
08:29:13 kernel: [ 1.709204] usbcore: registered new interface driver usbfs
08:29:13 kernel: [ 1.709337] usbcore: registered new interface driver hub
08:29:13 kernel: [ 1.720917] usbcore: registered new device driver usb
08:29:13 kernel: [ 1.748526] SCSI subsystem initialized
08:29:13 kernel: [ 1.771599] ehci_hcd: USB 2.0 'Enhanced' Host
Controller (EHCI) Driver
08:29:13 kernel: [ 1.771743] ehci_hcd 0000:00:10.4: PCI INT C ->
GSI 21 (level, low) -> IRQ 21
08:29:13 kernel: [ 1.771865] ehci_hcd 0000:00:10.4: EHCI Host Controller
08:29:13 kernel: [ 1.772128] ehci_hcd 0000:00:10.4: new USB bus
registered, assigned bus number 1
08:29:13 kernel: [ 1.792092] ehci_hcd 0000:00:10.4: irq 21, io mem
0xfea00000
08:29:13 kernel: [ 1.798055] ehci_hcd 0000:00:10.4: USB 2.0
started, EHCI 1.00
08:29:13 kernel: [ 1.798219] usb usb1: New USB device found,
idVendor=1d6b, idProduct=0002
08:29:13 kernel: [ 1.798294] usb usb1: New USB device strings:
Mfr=3, Product=2, SerialNumber=1
08:29:13 kernel: [ 1.798377] usb usb1: Product: EHCI Host Controller
08:29:13 kernel: [ 1.798446] usb usb1: Manufacturer: Linux
2.6.29-rt3.sr.8 ehci_hcd
08:29:13 kernel: [ 1.798517] usb usb1: SerialNumber: 0000:00:10.4
08:29:13 kernel: [ 1.798712] usb usb1: configuration #1 chosen from 1 choice
08:29:13 kernel: [ 1.798832] hub 1-0:1.0: USB hub found
08:29:13 kernel: [ 1.798920] hub 1-0:1.0: 6 ports detected
08:29:13 kernel: [ 1.799245] via82cxxx 0000:00:0f.1: VIA vt8237
(rev 00) IDE UDMA133
08:29:13 kernel: [ 1.799323] via82cxxx 0000:00:0f.1: IDE
controller (0x1106:0x0571 rev 0x06)
08:29:13 kernel: [ 1.799427] VIA_IDE 0000:00:0f.1: PCI INT A ->
GSI 20 (level, low) -> IRQ 20
08:29:13 kernel: [ 1.799541] via82cxxx 0000:00:0f.1: not 100%
native mode: will probe irqs later
08:29:13 kernel: [ 1.799629] ide0: BM-DMA at 0xfc00-0xfc07
08:29:13 kernel: [ 1.799705] ide1: BM-DMA at 0xfc08-0xfc0f
08:29:13 kernel: [ 1.853213] uhci_hcd: USB Universal Host
Controller Interface driver
08:29:13 kernel: [ 2.101065] usb 1-3: new high speed USB device
using ehci_hcd and address 2
08:29:13 kernel: [ 2.185140] hda: ST3250620A, ATA DISK drive
08:29:13 kernel: [ 2.223960] usb 1-3: New USB device found,
idVendor=05ac, idProduct=1006
08:29:13 kernel: [ 2.224076] usb 1-3: New USB device strings:
Mfr=1, Product=2, SerialNumber=3
08:29:13 kernel: [ 2.224153] usb 1-3: Product: Keyboard Hub
08:29:13 kernel: [ 2.224221] usb 1-3: Manufacturer: Apple, Inc.
08:29:13 kernel: [ 2.224289] usb 1-3: SerialNumber: 000000000000
08:29:13 kernel: [ 2.224501] usb 1-3: configuration #1 chosen from 1 choice
08:29:13 kernel: [ 2.224710] hub 1-3:1.0: USB hub found
08:29:13 kernel: [ 2.224915] hub 1-3:1.0: 3 ports detected
08:29:13 kernel: [ 2.498156] usb 1-3.2: new low speed USB device
using ehci_hcd and address 4
08:29:13 kernel: [ 2.590507] usb 1-3.2: New USB device found,
idVendor=05ac, idProduct=0221
08:29:13 kernel: [ 2.590583] usb 1-3.2: New USB device strings:
Mfr=1, Product=2, SerialNumber=0
08:29:13 kernel: [ 2.590666] usb 1-3.2: Product: Apple Keyboard
08:29:13 kernel: [ 2.590736] usb 1-3.2: Manufacturer: Apple, Inc
08:29:13 kernel: [ 2.590946] usb 1-3.2: configuration #1 chosen
from 1 choice
08:29:13 kernel: [ 2.616154] usbcore: registered new interface driver hiddev
08:29:13 kernel: [ 2.616388] usbcore: registered new interface driver usbhid
08:29:13 kernel: [ 2.616460] usbhid: v2.6:USB HID core driver
08:29:13 kernel: [ 2.638712] input: Apple, Inc Apple Keyboard as
/devices/pci0000:00/0000:00:10.4/usb1/1-3/1-3.2/1-3.2:1.0/input/input0
08:29:13 kernel: [ 2.647225] apple 0003:05AC:0221.0001:
input,hidraw0: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on
usb-0000:00:10.4-3.2/input0
08:29:13 kernel: [ 2.650550] input: Apple, Inc Apple Keyboard as
/devices/pci0000:00/0000:00:10.4/usb1/1-3/1-3.2/1-3.2:1.1/input/input1
08:29:13 kernel: [ 2.659185] apple 0003:05AC:0221.0002:
input,hidraw1: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on
usb-0000:00:10.4-3.2/input1
08:29:13 kernel: [ 2.797270] hda: UDMA/100 mode selected
08:29:13 kernel: [ 3.591105] hdc: _NEC DVD_RW ND-4570A, ATAPI
CD/DVD-ROM drive
08:29:13 kernel: [ 4.203239] hdc: UDMA/33 mode selected
08:29:13 kernel: [ 4.203580] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
08:29:13 kernel: [ 4.213171] ide1 at 0x170-0x177,0x376 on irq 15
08:29:13 kernel: [ 4.214912] uhci_hcd 0000:00:10.0: PCI INT A ->
GSI 21 (level, low) -> IRQ 21
08:29:13 kernel: [ 4.215046] uhci_hcd 0000:00:10.0: UHCI Host Controller
08:29:13 kernel: [ 4.215175] uhci_hcd 0000:00:10.0: new USB bus
registered, assigned bus number 2
08:29:13 kernel: [ 4.215289] uhci_hcd 0000:00:10.0: irq 21, io
base 0x0000ee80
08:29:13 kernel: [ 4.216409] usb usb2: New USB device found,
idVendor=1d6b, idProduct=0001
08:29:13 kernel: [ 4.216484] usb usb2: New USB device strings:
Mfr=3, Product=2, SerialNumber=1
08:29:13 kernel: [ 4.216566] usb usb2: Product: UHCI Host Controller
08:29:13 kernel: [ 4.216635] usb usb2: Manufacturer: Linux
2.6.29-rt3.sr.8 uhci_hcd
08:29:13 kernel: [ 4.216707] usb usb2: SerialNumber: 0000:00:10.0
08:29:13 kernel: [ 4.216880] usb usb2: configuration #1 chosen from 1 choice
08:29:13 kernel: [ 4.216997] hub 2-0:1.0: USB hub found
08:29:13 kernel: [ 4.217096] hub 2-0:1.0: 2 ports detected
08:29:13 kernel: [ 4.217344] sata_via 0000:00:0f.0: PCI INT B ->
GSI 20 (level, low) -> IRQ 20
08:29:13 kernel: [ 4.217492] sata_via 0000:00:0f.0: routed to hard
irq line 11
08:29:13 kernel: [ 4.222134] scsi0 : sata_via
08:29:13 kernel: [ 4.222646] scsi1 : sata_via
08:29:13 kernel: [ 4.222782] ata1: SATA max UDMA/133 cmd 0xeff0
ctl 0xefe4 bmdma 0xef80 irq 20
08:29:13 kernel: [ 4.222857] ata2: SATA max UDMA/133 cmd 0xef98
ctl 0xefe0 bmdma 0xef88 irq 20
08:29:13 kernel: [ 4.423016] ata1: SATA link down 1.5 Gbps
(SStatus 0 SControl 300)
08:29:13 kernel: [ 4.645012] ata2: SATA link down 1.5 Gbps
(SStatus 0 SControl 300)
08:29:13 kernel: [ 4.666607] uhci_hcd 0000:00:10.1: PCI INT A ->
GSI 21 (level, low) -> IRQ 21
08:29:13 kernel: [ 4.666699] uhci_hcd 0000:00:10.1: UHCI Host Controller
08:29:13 kernel: [ 4.666840] uhci_hcd 0000:00:10.1: new USB bus
registered, assigned bus number 3
08:29:13 kernel: [ 4.666956] uhci_hcd 0000:00:10.1: irq 21, io
base 0x0000eea0
08:29:13 kernel: [ 4.667144] usb usb3: New USB device found,
idVendor=1d6b, idProduct=0001
08:29:13 kernel: [ 4.667219] usb usb3: New USB device strings:
Mfr=3, Product=2, SerialNumber=1
08:29:13 kernel: [ 4.667301] usb usb3: Product: UHCI Host Controller
08:29:13 kernel: [ 4.667370] usb usb3: Manufacturer: Linux
2.6.29-rt3.sr.8 uhci_hcd
08:29:13 kernel: [ 4.667442] usb usb3: SerialNumber: 0000:00:10.1
08:29:13 kernel: [ 4.667622] usb usb3: configuration #1 chosen from 1 choice
08:29:13 kernel: [ 4.667745] hub 3-0:1.0: USB hub found
08:29:13 kernel: [ 4.667828] hub 3-0:1.0: 2 ports detected
08:29:13 kernel: [ 4.668613] uhci_hcd 0000:00:10.2: PCI INT B ->
GSI 21 (level, low) -> IRQ 21
08:29:13 kernel: [ 4.668708] uhci_hcd 0000:00:10.2: UHCI Host Controller
08:29:13 rsyslogd: [origin software="rsyslogd" swVersion="4.4.1"
x-pid="3351" x-info="http://www.rsyslog.com";] (re)start
08:29:13 kernel: [ 4.668831] uhci_hcd 0000:00:10.2: new USB bus
registered, assigned bus number 4
08:29:13 kernel: [ 4.668943] uhci_hcd 0000:00:10.2: irq 21, io
base 0x0000eec0
08:29:13 kernel: [ 4.669120] usb usb4: New USB device found,
idVendor=1d6b, idProduct=0001
08:29:13 kernel: [ 4.669195] usb usb4: New USB device strings:
Mfr=3, Product=2, SerialNumber=1
08:29:13 kernel: [ 4.669277] usb usb4: Product: UHCI Host Controller
08:29:13 kernel: [ 4.669346] usb usb4: Manufacturer: Linux
2.6.29-rt3.sr.8 uhci_hcd
08:29:13 kernel: [ 4.669418] usb usb4: SerialNumber: 0000:00:10.2
08:29:13 kernel: [ 4.669585] usb usb4: configuration #1 chosen from 1 choice
08:29:13 kernel: [ 4.669700] hub 4-0:1.0: USB hub found
08:29:13 kernel: [ 4.669780] hub 4-0:1.0: 2 ports detected
08:29:13 kernel: [ 4.689043] ide-gd driver 1.18
08:29:13 kernel: [ 4.689181] hda: max request size: 512KiB
08:29:13 kernel: [ 4.710249] ide-cd driver 5.00
08:29:13 kernel: [ 4.732660] hda: 488397168 sectors (250059 MB)
w/16384KiB Cache, CHS=30401/255/63
08:29:13 kernel: [ 4.756680] hda: cache flushes supported
08:29:13 kernel: [ 4.756867] hda: hda1 hda2 hda3 hda4 < hda5 >
08:29:13 kernel: [ 4.805591] ide-cd: hdc: ATAPI 48X DVD-ROM
DVD-R/RAM CD-R/RW drive, 2048kB Cache
08:29:13 kernel: [ 4.805982] Uniform CD-ROM driver Revision: 3.20
08:29:13 kernel: [ 4.969039] usb 3-2: new low speed USB device
using uhci_hcd and address 2
08:29:13 kernel: [ 5.136037] usb 3-2: New USB device found,
idVendor=046d, idProduct=c521
08:29:13 kernel: [ 5.136120] usb 3-2: New USB device strings:
Mfr=1, Product=2, SerialNumber=0
08:29:13 kernel: [ 5.136196] usb 3-2: Product: USB Receiver
08:29:13 kernel: [ 5.136263] usb 3-2: Manufacturer: Logitech
08:29:13 kernel: [ 5.136489] usb 3-2: configuration #1 chosen from 1 choice
08:29:13 kernel: [ 5.161624] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input2
08:29:13 kernel: [ 5.172200] generic-usb 0003:046D:C521.0003:
input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on
usb-0000:00:10.1-2/input0
08:29:13 kernel: [ 5.202262] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.1/input/input3
08:29:13 kernel: [ 5.212268] generic-usb 0003:046D:C521.0004:
input,hiddev96,hidraw3: USB HID v1.11 Device [Logitech USB Receiver]
on usb-0000:00:10.1-2/input1
08:29:13 kernel: [ 5.367461] PM: Starting manual resume from disk
08:29:13 kernel: [ 5.411780] kjournald starting. Commit interval 5 seconds
08:29:13 kernel: [ 5.411874] EXT3-fs: mounted filesystem with
ordered data mode.
08:29:13 kernel: [ 6.545326] udev: starting version 141
08:29:13 kernel: [ 6.749156] input: Power Button (FF) as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
08:29:13 kernel: [ 6.770099] ACPI: Power Button (FF) [PWRF]
08:29:13 kernel: [ 6.770368] input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
08:29:13 kernel: [ 6.782101] ACPI: Power Button (CM) [PWRB]
08:29:13 kernel: [ 6.782357] input: Sleep Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
08:29:13 kernel: [ 6.794111] ACPI: Sleep Button (CM) [SLPB]
08:29:13 kernel: [ 6.833145] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
08:29:13 kernel: [ 6.843489] shpchp: Standard Hot Plug PCI
Controller Driver version: 0.4
08:29:13 kernel: [ 7.302650] input: PC Speaker as
/devices/platform/pcspkr/input/input7
08:29:13 kernel: [ 8.000885] ICE1712 0000:00:0e.0: PCI INT A ->
GSI 17 (level, low) -> IRQ 17
08:29:13 kernel: [ 9.473527] Adding 2931852k swap on /dev/hda2.
Priority:-1 extents:1 across:2931852k
08:29:13 kernel: [ 9.632775] EXT3 FS on hda1, internal journal
08:29:13 kernel: [ 9.779482] loop: module loaded
08:29:13 kernel: [ 299.883818] kjournald starting. Commit interval 5 seconds
08:29:13 kernel: [ 299.884034] EXT3 FS on hda3, internal journal
08:29:13 kernel: [ 299.884157] EXT3-fs: mounted filesystem with
ordered data mode.
08:29:13 kernel: [ 299.935397] kjournald starting. Commit interval 5 seconds
08:29:13 kernel: [ 299.935459] EXT3 FS on hda5, internal journal
08:29:13 kernel: [ 299.935466] EXT3-fs: mounted filesystem with
ordered data mode.
08:29:13 kernel: [ 300.894524] skge eth0: enabling interface
08:29:13 kernel: [ 300.898651] ADDRCONF(NETDEV_UP): eth0: link is not ready
08:29:13 kernel: [ 302.563642] skge eth0: Link is up at 100 Mbps,
full duplex, flow control both
08:29:13 kernel: [ 302.564096] ADDRCONF(NETDEV_CHANGE): eth0: link
becomes ready
08:29:15 kernel: [ 304.955856] Program wdm tried to access /dev/mem
between 100000->102000.
08:29:18 kernel: [ 308.297928] nvidia: module license 'NVIDIA' taints kernel.
08:29:18 kernel: [ 308.619983] nvidia 0000:01:00.0: PCI INT A -> GSI
16 (level, low) -> IRQ 16
08:29:18 kernel: [ 308.623066] NVRM: loading NVIDIA UNIX x86 Kernel
Module 185.18.36 Fri Aug 14 17:18:04 PDT 2009
08:29:20 kernel: [ 309.193989] agpgart-via 0000:00:00.0: AGP 3.5 bridge
08:29:20 kernel: [ 309.195068] agpgart-via 0000:00:00.0: putting AGP
V3 device into 8x mode
08:29:20 kernel: [ 309.195147] nvidia 0000:01:00.0: putting AGP V3
device into 8x mode
08:57:51 kernel: [ 2021.146666] agpgart-via 0000:00:00.0: AGP 3.5 bridge
08:57:51 kernel: [ 2021.146690] agpgart-via 0000:00:00.0: putting AGP
V3 device into 8x mode
08:57:51 kernel: [ 2021.146765] nvidia 0000:01:00.0: putting AGP V3
device into 8x mode
Greeting, Sven (is my first bug report - sorry for missing profesionality)
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
