Package: linux-image-2.6.30-1-amd64 Version: 2.6.30-6 Severity: wishlist File: linux-image-2.6.30
As described in http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=3f2aa307c4d26b4ed6509d0a79e8254c9e07e921 the scheduler improves interactivity. I would like to see this in Debian's kernel packages 2.6.{26,30} because it deletes the effort to compile an individual kernel for me and other people. Thanks, Ferdinand Ebert -- Package-specific info: ** Version: Linux version 2.6.30-1-amd64 (Debian 2.6.30-6) (wa...@debian.org) (gcc version 4.3.4 (Debian 4.3.4-1) ) #1 SMP Sat Aug 15 18:09:19 UTC 2009 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.30-1-amd64 root=/dev/mapper/vonNeumann-root ro selinux=0 enforcing=0 quiet ** Not tainted ** Kernel log: [ 8.085608] w83627ehf: Found W83627DHG chip at 0x290 [ 8.099251] coretemp coretemp.0: Using relative temperature scale! [ 8.099302] coretemp coretemp.1: Using relative temperature scale! [ 9.060238] EXT4-fs: barriers enabled [ 9.060425] kjournald2 starting: pid 2316, dev dm-4:8, commit interval 5 seconds [ 9.060726] EXT4 FS on dm-4, internal journal on dm-4:8 [ 9.060729] EXT4-fs: delayed allocation enabled [ 9.060731] EXT4-fs: file extents enabled [ 9.060912] EXT4-fs: mballoc enabled [ 9.060927] EXT4-fs: mounted filesystem dm-4 with ordered data mode [ 9.110744] EXT4-fs: barriers enabled [ 9.114881] kjournald2 starting: pid 2317, dev dm-3:8, commit interval 5 seconds [ 9.115111] EXT4 FS on dm-3, internal journal on dm-3:8 [ 9.115113] EXT4-fs: delayed allocation enabled [ 9.115116] EXT4-fs: file extents enabled [ 9.115238] EXT4-fs: mballoc enabled [ 9.115250] EXT4-fs: mounted filesystem dm-3 with ordered data mode [ 9.135986] EXT4-fs: barriers enabled [ 9.136164] kjournald2 starting: pid 2318, dev dm-1:8, commit interval 5 seconds [ 9.136436] EXT4 FS on dm-1, internal journal on dm-1:8 [ 9.136438] EXT4-fs: delayed allocation enabled [ 9.136440] EXT4-fs: file extents enabled [ 9.136561] EXT4-fs: mballoc enabled [ 9.136573] EXT4-fs: mounted filesystem dm-1 with ordered data mode [ 9.153307] EXT4-fs: barriers enabled [ 9.153479] kjournald2 starting: pid 2319, dev dm-2:8, commit interval 5 seconds [ 9.153758] EXT4 FS on dm-2, internal journal on dm-2:8 [ 9.153760] EXT4-fs: delayed allocation enabled [ 9.153762] EXT4-fs: file extents enabled [ 9.153873] EXT4-fs: mballoc enabled [ 9.153885] EXT4-fs: mounted filesystem dm-2 with ordered data mode [ 9.181201] EXT4-fs: barriers enabled [ 9.196535] kjournald2 starting: pid 2320, dev sdb1:8, commit interval 5 seconds [ 9.196818] EXT4 FS on sdb1, internal journal on sdb1:8 [ 9.196820] EXT4-fs: delayed allocation enabled [ 9.196822] EXT4-fs: file extents enabled [ 9.197862] EXT4-fs: mballoc enabled [ 9.197876] EXT4-fs: mounted filesystem sdb1 with ordered data mode [ 9.231630] EXT4-fs: barriers enabled [ 9.240802] kjournald2 starting: pid 2321, dev sdc3:8, commit interval 5 seconds [ 9.241119] EXT4 FS on sdc3, internal journal on sdc3:8 [ 9.241121] EXT4-fs: delayed allocation enabled [ 9.241123] EXT4-fs: file extents enabled [ 9.242101] EXT4-fs: mballoc enabled [ 9.242115] EXT4-fs: mounted filesystem sdc3 with ordered data mode [ 9.274448] EXT4-fs: barriers enabled [ 9.291735] kjournald2 starting: pid 2322, dev sda1:8, commit interval 5 seconds [ 9.292037] EXT4 FS on sda1, internal journal on sda1:8 [ 9.292039] EXT4-fs: delayed allocation enabled [ 9.292041] EXT4-fs: file extents enabled [ 9.293119] EXT4-fs: mballoc enabled [ 9.293131] EXT4-fs: mounted filesystem sda1 with ordered data mode [ 9.491164] Adding 1535992k swap on /dev/mapper/vonNeumann-swap. Priority:-1 extents:1 across:1535992k [ 11.525394] Bridge firewalling registered [ 11.529014] device eth0 entered promiscuous mode [ 11.536928] r8169: eth0: link up [ 11.536935] r8169: eth0: link up [ 11.539321] br0: port 1(eth0) entering learning state [ 21.620010] br0: no IPv6 routers present [ 21.916004] eth0: no IPv6 routers present [ 26.536018] br0: port 1(eth0) entering forwarding state [ 29.163752] fuse init (API version 7.11) [ 44.396285] [drm] Initialized drm 1.1.0 20060810 [ 44.433577] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 44.433583] pci 0000:00:02.0: setting latency timer to 64 [ 44.445993] alloc irq_desc for 29 on cpu 0 node 0 [ 44.445997] alloc kstat_irqs on cpu 0 node 0 [ 44.446009] pci 0000:00:02.0: irq 29 for MSI/MSI-X [ 44.446139] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 55.334522] CPU0 attaching NULL sched-domain. [ 55.334528] CPU1 attaching NULL sched-domain. [ 55.344078] CPU0 attaching sched-domain: [ 55.344081] domain 0: span 0-1 level MC [ 55.344084] groups: 0 1 [ 55.344091] CPU1 attaching sched-domain: [ 55.344093] domain 0: span 0-1 level MC [ 55.344096] groups: 1 0 [ 1728.900014] usb 3-5: new high speed USB device using ehci_hcd and address 3 [ 1729.033641] usb 3-5: New USB device found, idVendor=1307, idProduct=0165 [ 1729.033645] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1729.033648] usb 3-5: Product: USB Flash Drive [ 1729.033650] usb 3-5: Manufacturer: USB 2.0 [ 1729.033653] usb 3-5: SerialNumber: 10b0d006aca3c3 [ 1729.033758] usb 3-5: configuration #1 chosen from 1 choice [ 1729.089028] Initializing USB Mass Storage driver... [ 1729.089411] scsi8 : SCSI emulation for USB Mass Storage devices [ 1729.090153] usb-storage: device found at 3 [ 1729.090156] usb-storage: waiting for device to settle before scanning [ 1729.090179] usbcore: registered new interface driver usb-storage [ 1729.090183] USB Mass Storage support registered. [ 1734.088188] usb-storage: device scan complete [ 1734.088910] scsi 8:0:0:0: Direct-Access USB 2.0 USB Flash Drive 0.00 PQ: 0 ANSI: 2 [ 1734.090155] sd 8:0:0:0: [sdd] 15794176 512-byte hardware sectors: (8.08 GB/7.53 GiB) [ 1734.090768] sd 8:0:0:0: [sdd] Write Protect is off [ 1734.090772] sd 8:0:0:0: [sdd] Mode Sense: 00 00 00 00 [ 1734.090774] sd 8:0:0:0: [sdd] Assuming drive cache: write through [ 1734.096842] sd 8:0:0:0: [sdd] Assuming drive cache: write through [ 1734.096851] sdd: sdd1 [ 1734.238682] sd 8:0:0:0: [sdd] Attached SCSI removable disk [ 6643.055036] reportbug[4772] trap divide error ip:7f9d8cdd447c sp:7f9d86f7f0a0 error:0 in libgtk-x11-2.0.so.0.1600.6[7f9d8ccae000+3ea000] ** Loaded modules: Module Size Used by usb_storage 61488 1 i915 166856 1 drm 172688 2 i915 i2c_algo_bit 5988 1 i915 video 21884 1 i915 output 3472 1 video acpi_cpufreq 8912 0 cpufreq_conservative 7928 0 cpufreq_userspace 3652 0 cpufreq_stats 4660 0 cpufreq_powersave 1792 0 fuse 54784 3 bridge 48256 0 stp 2868 1 bridge ext4 216256 7 jbd2 58816 1 ext4 crc16 2272 1 ext4 coretemp 6656 0 w83627ehf 22928 0 hwmon_vid 3072 1 w83627ehf kvm_intel 47368 0 kvm 158904 1 kvm_intel loop 15980 0 snd_hda_codec_analog 74864 1 joydev 10992 0 snd_hda_intel 26680 1 snd_hda_codec 75248 2 snd_hda_codec_analog,snd_hda_intel snd_hwdep 8152 1 snd_hda_codec snd_pcm_oss 37200 0 snd_mixer_oss 15072 1 snd_pcm_oss snd_pcm 78504 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_midi 6976 0 snd_rawmidi 23008 1 snd_seq_midi snd_seq_midi_event 7712 1 snd_seq_midi snd_seq 51392 2 snd_seq_midi,snd_seq_midi_event snd_timer 21824 2 snd_pcm,snd_seq snd_seq_device 7476 3 snd_seq_midi,snd_rawmidi,snd_seq i2c_i801 10464 0 i2c_core 25456 4 i915,drm,i2c_algo_bit,i2c_i801 parport_pc 27080 0 snd 63912 13 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 7984 1 snd parport 38224 1 parport_pc snd_page_alloc 10000 2 snd_hda_intel,snd_pcm evdev 10448 9 asus_atk0110 7744 0 processor 40160 1 acpi_cpufreq button 6512 0 ext3 122864 1 jbd 48168 1 ext3 mbcache 8804 2 ext4,ext3 dm_mirror 14648 0 dm_region_hash 12736 1 dm_mirror dm_log 9924 2 dm_mirror,dm_region_hash dm_snapshot 22748 0 dm_mod 59384 21 dm_mirror,dm_log,dm_snapshot sd_mod 33720 9 crc_t10dif 2096 1 sd_mod usbhid 37328 0 ata_generic 5924 0 ide_pci_generic 4964 0 hid 41376 1 usbhid ide_core 105120 1 ide_pci_generic ahci 36480 0 pata_jmicron 4016 2 firewire_ohci 22356 0 firewire_core 44996 1 firewire_ohci crc_itu_t 2720 1 firewire_core 8139too 25844 0 8139cp 20944 0 ata_piix 25124 2 r8169 32548 0 mii 5600 3 8139too,8139cp,r8169 libata 175500 4 ata_generic,ahci,pata_jmicron,ata_piix scsi_mod 158784 3 usb_storage,sd_mod,libata uhci_hcd 22208 0 ehci_hcd 33820 0 intel_agp 28752 1 floppy 55400 0 thermal 15936 0 fan 5240 0 thermal_sys 16448 4 video,processor,thermal,fan ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82P965/G965 Memory Controller Hub [8086:29a0] (rev 02) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ea] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:01.0 PCI bridge [0604]: Intel Corporation 82P965/G965 PCI Express Root Port [8086:29a1] (rev 02) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Prefetchable memory behind bridge: 00000000bfd00000-00000000bfdfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver 00:02.0 VGA compatible controller [0300]: Intel Corporation 82G965 Integrated Graphics Controller [8086:29a2] (rev 02) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ea] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 29 Region 0: Memory at ffa00000 (32-bit, non-prefetchable) [size=1M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at ec00 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> 00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at d880 [size=32] Kernel driver in use: uhci_hcd 00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at dc00 [size=32] Kernel driver in use: uhci_hcd 00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at ff9fb800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at ff9f4000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Prefetchable memory behind bridge: 00000000bfe00000-00000000bfefffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver 00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: ff600000-ff6fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver 00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 [8086:2849] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: ff500000-ff5fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at d400 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at d480 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at d800 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at ff9fb400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev f2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: ff700000-ff7fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller [8086:2810] (rev 02) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE Controller [8086:2820] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ec] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at e880 [size=8] Region 1: I/O ports at e800 [size=4] Region 2: I/O ports at e480 [size=8] Region 3: I/O ports at e400 [size=4] Region 4: I/O ports at e080 [size=16] Region 5: I/O ports at e000 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0400 [size=32] Kernel driver in use: i801_smbus 00:1f.5 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 2 port SATA IDE Controller [8086:2825] (rev 02) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:81ec] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at d080 [size=8] Region 1: I/O ports at d000 [size=4] Region 2: I/O ports at cc00 [size=8] Region 3: I/O ports at c880 [size=4] Region 4: I/O ports at c800 [size=16] Region 5: I/O ports at c480 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01) Subsystem: ASUSTeK Computer Inc. P5B [1043:81aa] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 28 Region 0: I/O ports at 9800 [size=256] Region 2: Memory at ff5ff000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at ff5c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 03:00.0 SATA controller [0106]: JMicron Technology Corp. 20360/20363 Serial ATA Controller [197b:2363] (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. P5B [JMB363] [1043:81e4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 5: Memory at ff6fe000 (32-bit, non-prefetchable) [size=8K] Expansion ROM at ff6e0000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: ahci 03:00.1 IDE interface [0101]: JMicron Technology Corp. 20360/20363 Serial ATA Controller [197b:2363] (rev 02) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. P5B [JMB363] [1043:81e4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at ac00 [size=8] Region 1: I/O ports at a880 [size=4] Region 2: I/O ports at a800 [size=8] Region 3: I/O ports at a480 [size=4] Region 4: I/O ports at a400 [size=16] Capabilities: <access denied> Kernel driver in use: pata_jmicron 05:01.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard [1043:808b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at ff7ff800 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at ff7f8000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: firewire_ohci 05:03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at b800 [size=256] Region 1: Memory at ff7ff400 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: 8139too -- System Information: Debian Release: squeeze/sid Architecture: amd64 (x86_64) Kernel: Linux 2.6.30-1-amd64 (SMP w/2 CPU cores) Locale: LANG=de_DE, LC_CTYPE=de_DE (charmap=UTF-8) (ignored: LC_ALL set to de_DE.UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.30-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.27 Debian configuration management sy ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs ii module-init-tools 3.10-3 tools for managing Linux kernel mo linux-image-2.6.30-1-amd64 recommends no packages. Versions of packages linux-image-2.6.30-1-amd64 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.30 <none> (no description available) -- debconf information excluded -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
