On Tuesday 15 September 2009 14:07:58 you wrote: > On Tue, Sep 15, 2009 at 13:23:15 +0100, sebI levI wrote: > > > I'm using a Fujitsu Esprimo Mobile v5535, debian squeeze which I > > upgrade regularly. I have this laptop since december 2008 and after a > > couple of days of working on it I got X working (I was using a > > different sis driver, sadly I can't remember where I got it from - it > > might have been included in X - I think it was one I found somewhere > > on the web though, probably the sis 2D driver). > > > > After automatic aptitude upgrade on Monday (14 Sept 2009) X stopped > > working. I stupidly deleted the existing /etc/X11/xorg.conf which > > caused the xserver to do the automatic configuration which lead to X > > starting with the vesa driver in 800x600. I ran X -configure (or X > > --configure?) and used the generated xorg.conf as a starting point. > > After a bit of googling I found people who managed to achieve higher > > resolutions with: HorizSync 30-107 > > VertRefresh 50-185 > > I added that to my xorg.conf (included in this bugreport, only > > difference is the "Driver" - line - in the version I'm using it's > > "vesa" instead of "sis"), now I'm running X in 1280x800 with the vesa > > driver which works but is noticeably slower (can't watch any videos > > unless they're very small - with my older setup I was able to watch > > films in 1280x800 fullscreen without problems). I tried finding a > > different working driver on the net but I couldn't find one for this > > version of X.org so I decided to file a bugreport. I'm still hoping > > it's just a configuration issue, if so, please let me know. > > > The sis driver doesn't seem to list your device as supported. Do you > know what driver you were using before the upgrade, and can you send a > log from the older version? > > Thanks, > Julien > Thanks for your prompt reply.
Since I couldn't find the logfile I went on a mission to find the place where I got the driver before - I got it from http://ncc-1701a.homelinux.net/~linux-sis/downloads/ but couldn't remember which driver I was using so I just gave the first one in the list (xorg-driver-sisimedia_0.9-1_i386.deb) a go. Downloaded and installed the .deb-file using dpkg, let it replace the xorg.conf, restarted kdm (I'm using kde, my wife uses gnome) and everything seems to be working fine now. Maybe there would be a way of including this driver in debian? I know a lot of people are experiencing problems with those cursed SiS graphic cards. I attached the Xlog and xorg.conf if that's any help to you? Thanks a million for your time. I hope I didn't waste too much of it... Cheers, big up Debian and all the people that make it happen! Sebi PS: I'm not sure if I should have sent this email to the 546741-buglist as well so I'm just sending it to you for now. Sorry if I'm doing it wrong, please do correct me...
X.Org X Server 1.6.3 Release Date: 2009-7-31 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.30.4-dsa-ia32 i686 Debian Current Operating System: Linux hexbrex 2.6.26-2-686 #1 SMP Sun Jun 21 04:57:38 UTC 2009 i686 Build Date: 06 August 2009 04:49:57PM xorg-server 2:1.6.3-1+b1 (bui...@murphy.debian.org) Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 15 21:27:09 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) No Layout section. Using the first Screen section. (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Configured Monitor" (**) | |-->Device "Configured Video Device" (==) Automatically adding devices (==) Automatically enabling devices (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/cyrillic, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to "/usr/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (II) Loader magic: 0x6c0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (++) using VT number 7 (--) PCI:*(0:1:0:0) 1039:6351:1734:1125 Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter rev 16, Mem @ 0xc0000000/268435456, 0xd4000000/131072, I/O @ 0x00009000/128 (II) Open ACPI successful (/var/run/acpid.socket) (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension SELinux (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "sisimedia" (II) Loading /usr/lib/xorg/modules/drivers//sisimedia_drv.so (II) Module sisimedia: vendor="X.Org Foundation" compiled for 7.4.0, module version = 0.8.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620, SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H, SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre), SIS[M]661[F|M]X/[M]741[GX]/[M]760[GX]/[M]761[GX]/662, SIS340, [M]670/[M]770[GX], [M]671/[M]771[GX] (II) SIS: driver for XGI chipsets: Volari Z7 (XG20), Volari V3XT/V5/V8/Duo (XG40/XG42) (II) Primary Device is: PCI 0...@00:00:0 (WW) Falling back to old probe method for sisimedia (--) Assigning device section with no busID to primary device (--) Chipset [M]671/[M]771[GX] found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) SIS(0): SiS driver (2006/10/17-1, compiled for X.org 7.4.0.0) (II) SIS(0): Copyright (C) 2001-2005 Thomas Winischhofer <tho...@winischhofer.net> and others (II) SIS(0): *** See http://www.winischhofer.at/linuxsisvga.shtml (II) SIS(0): *** for documentation, updates and a Premium Version. (II) SIS(0): RandR rotation support not available in this version. (II) SIS(0): Dynamic modelist support not available in this version. (II) SIS(0): Screen growing support not available in this version. (II) SIS(0): Advanced Xv video blitter not available in this version. (II) SIS(0): Advanced MergedFB support not available in this version. (--) SIS(0): sisfb not found (--) SIS(0): Relocated I/O registers at 0x9000 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) SIS(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 24/32 (==) SIS(0): Depth 24, (--) framebuffer bpp 32 (==) SIS(0): RGB weight 888 (==) SIS(0): Default visual is TrueColor (WW) SIS(0): Could not find/read video BIOS (==) SIS(0): Using XAA acceleration architecture (==) SIS(0): Color HW cursor is enabled (II) SIS(0): Using VRAM command queue, size 512k (==) SIS(0): Hotkey display switching is enabled (==) SIS(0): SiSCtrl utility interface is disabled (II) SIS(0): For information on SiSCtrl, see http://www.winischhofer.at/linuxsispart1.shtml#sisctrl (==) SIS(0): X server will not keep DPI constant for all screen sizes (==) SIS(0): DRI enabled (--) SIS(0): 262144K shared video RAM (UMA) (--) SIS(0): DRAM type: DDR SDRAM (--) SIS(0): Memory clock: 596.582 MHz (--) SIS(0): DRAM bus width: 64 bit (--) SIS(0): Linear framebuffer at 0xC0000000 (--) SIS(0): MMIO registers at 0xD4000000 (size 64K) (--) SIS(0): VideoRAM: 262144 KB (II) SIS(0): Using 20480K of framebuffer memory at offset 0K (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (--) SIS(0): Detected SiS307LV video bridge (Charter/UMC-1, ID 7; Rev 0xe1) (--) SIS(0): No CRT1/VGA detected (--) SIS(0): Detected LCD/plasma panel (1280x800, 11, non-exp., RGB18 [ec2305]) (==) SIS(0): Using gamma correction (1.0, 1.0, 1.0) (II) SIS(0): CRT1 gamma correction is enabled (II) SIS(0): Separate Xv gamma correction for CRT1 is disabled (II) SIS(0): CRT2 gamma correction is enabled (--) SIS(0): Memory bandwidth at 32 bpp is 1193.16 MHz (--) SIS(0): Detected LCD PanelDelayCompensation 0x00 (for LCD=CRT2) (--) SIS(0): Detected LCD PanelDelayCompensation 0x00 (for LCD=CRT1) (--) SIS(0): 302LV/302ELV: Using EMI 0x6a0d7038 (LCD) (--) SIS(0): crtno 1 CRT2 realcrtno 1(--) SIS(0): CRT2 DDC probing failed (==) SIS(0): Min pixel clock is 10 MHz (--) SIS(0): Max pixel clock is 340 MHz (II) SIS(0): Replaced entire mode list with built-in modes (II) SIS(0): Correcting missing CRT2 monitor HSync range (II) SIS(0): Correcting missing CRT2 monitor VRefresh range (II) SIS(0): "Unknown reason" in the following list means that the mode (II) SIS(0): is not supported on the chipset/bridge/current output device. (II) SIS(0): Configured Monitor: Using hsync range of 30.00-80.00 kHz (II) SIS(0): Configured Monitor: Using vrefresh range of 59.00-61.00 Hz (II) SIS(0): Configured Monitor: Using vrefresh value of 71.00 Hz (WW) SIS(0): Unable to estimate virtual size (II) SIS(0): Clock range: 10.00 to 340.00 MHz (II) SIS(0): Not using default mode "800x600" (vrefresh out of range) (II) SIS(0): Not using default mode "800x600" (vrefresh out of range) (II) SIS(0): Not using default mode "800x600" (vrefresh out of range) (II) SIS(0): Not using default mode "800x600" (vrefresh out of range) (II) SIS(0): Not using default mode "800x600" (vrefresh out of range) (II) SIS(0): Not using default mode "800x600" (vrefresh out of range) (II) SIS(0): Not using default mode "800x600" (hsync out of range) (II) SIS(0): Not using default mode "640x480" (vrefresh out of range) (II) SIS(0): Not using default mode "640x480" (vrefresh out of range) (II) SIS(0): Not using default mode "640x480" (vrefresh out of range) (II) SIS(0): Not using default mode "640x480" (vrefresh out of range) (II) SIS(0): Not using default mode "640x480" (vrefresh out of range) (II) SIS(0): Not using default mode "640x480" (hsync out of range) (II) SIS(0): Not using default mode "640x480" (hsync out of range) (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range) (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range) (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range) (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range) (II) SIS(0): Not using default mode "1024x768" (hsync out of range) (II) SIS(0): Not using default mode "1024x768" (hsync out of range) (II) SIS(0): Not using default mode "1280x1024" (unknown reason) (II) SIS(0): Not using default mode "1280x1024" (unknown reason) (II) SIS(0): Not using default mode "1280x1024" (unknown reason) (II) SIS(0): Not using default mode "1280x1024" (unknown reason) (II) SIS(0): Not using default mode "1600x1200" (unknown reason) (II) SIS(0): Not using default mode "1600x1200" (unknown reason) (II) SIS(0): Not using default mode "1600x1200" (unknown reason) (II) SIS(0): Not using default mode "1600x1200" (unknown reason) (II) SIS(0): Not using default mode "1600x1200" (unknown reason) (II) SIS(0): Not using default mode "1600x1200" (unknown reason) (II) SIS(0): Not using default mode "1600x1200" (unknown reason) (II) SIS(0): Not using default mode "1920x1440" (unknown reason) (II) SIS(0): Not using default mode "1920x1440" (unknown reason) (II) SIS(0): Not using default mode "1920x1440" (unknown reason) (II) SIS(0): Not using default mode "1920x1440" (unknown reason) (II) SIS(0): Not using default mode "1920x1440" (unknown reason) (II) SIS(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) (II) SIS(0): Not using default mode "2048x1536" (unknown reason) (II) SIS(0): Not using default mode "2048x1536" (unknown reason) (II) SIS(0): Not using default mode "2048x1536" (unknown reason) (II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) SIS(0): Not using default mode "1400x1050" (unknown reason) (II) SIS(0): Not using default mode "1400x1050" (unknown reason) (II) SIS(0): Not using default mode "1280x800" (vrefresh out of range) (II) SIS(0): Not using default mode "1280x800" (hsync out of range) (II) SIS(0): Not using default mode "1440x900" (unknown reason) (II) SIS(0): Not using default mode "1440x900" (unknown reason) (II) SIS(0): Not using default mode "1440x900" (unknown reason) (II) SIS(0): Not using default mode "1366x768" (unknown reason) (--) SIS(0): Virtual size is 1280x800 (pitch 1280) (**) SIS(0): *Default mode "1280x800" (1280x800) (For CRT device: 107.9 MHz, 63.9 kHz, 59.9 Hz) (**) SIS(0): *Default mode "1024x768" (1024x768) (For CRT device: 65.1 MHz, 48.5 kHz, 60.1 Hz) (**) SIS(0): *Default mode "800x600" (800x600) (For CRT device: 40.0 MHz, 37.9 kHz, 60.3 Hz) (**) SIS(0): *Default mode "640x480" (640x480) (For CRT device: 25.1 MHz, 31.3 kHz, 59.7 Hz) (==) SIS(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/lib/xorg/modules//libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.2.1 ABI class: X.Org Video Driver, version 5.0 (II) SIS(0): 2D acceleration enabled, modename xaa (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules//libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.1.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/lib/xorg/modules//libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.0.0 ABI class: X.Org Video Driver, version 5.0 (II) SIS(0): initializing int10 (II) SIS(0): Primary V_BIOS segment is: 0xc000 (II) SIS(0): VESA BIOS detected (II) SIS(0): VESA VBE Version 3.0 (II) SIS(0): VESA VBE Total Mem: 262144 kB (II) SIS(0): VESA VBE OEM: SiS (II) SIS(0): VESA VBE OEM Software Rev: 1.0 (II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp. (II) SIS(0): VESA VBE OEM Product: 6330 (II) SIS(0): VESA VBE OEM Product Rev: 3.74.10A (II) SIS(0): Setting standard mode 0x16 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: node name is /dev/dri/card0 drmOpenByBusid: Searching for BusID pci:0000:01:00.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: drmOpenMinor returns 10 drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 (II) [drm] loaded kernel module for "sis" driver. (II) [drm] DRM interface version 1.3 (II) [drm] DRM open master succeeded. (II) SIS(0): [drm] Using the DRM lock SAREA also for drawables. (II) SIS(0): [drm] framebuffer handle = 0xc0000000 (II) SIS(0): [drm] added 1 reserved context for kernel (II) SIS(0): X context handle = 0x1 (II) SIS(0): [drm] installed DRM signal handler (II) SIS(0): [dri] Video RAM memory heap: 0x1400000 to 0xff70000 (241088KB) (II) SIS(0): [dri] handle = 0xd4000000, size = 65536 (II) SIS(0): [drm] AGP enabled (II) SIS(0): [drm] Allocated 32MB AGP memory (II) SIS(0): [drm] Bound 32MB AGP memory (II) SIS(0): [drm] No valid IRQ number for device 1:0:0 (code -22) (II) SIS(0): [dri] Visual configs initialized (II) SIS(0): Framebuffer from (0,0) to (1279,4094) (II) SIS(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles 8x8 color pattern filled rectangles Solid Lines Dashed Lines Setting up tile and stipple cache: 32 128x128 slots 26 256x256 slots 7 512x512 slots 32 8x8 color pattern slots (--) SIS(0): CPU frequency 2266.81Mhz (II) SIS(0): Benchmarking system RAM to video RAM memory transfer methods: (--) SIS(0): Checked libc memcpy()... 233.0 MiB/s (--) SIS(0): Checked built-in-1 memcpy()... 234.1 MiB/s (--) SIS(0): Checked built-in-2 memcpy()... 117.0 MiB/s (--) SIS(0): Checked MMX memcpy()... 234.1 MiB/s (--) SIS(0): Checked SSE memcpy()... 235.6 MiB/s (--) SIS(0): Checked MMX2 memcpy()... 237.7 MiB/s (--) SIS(0): Using MMX2 method for aligned data transfers to video RAM (--) SIS(0): Using MMX2 method for unaligned data transfers to video RAM (==) SIS(0): Backing store disabled (==) SIS(0): Silken mouse enabled (II) SIS(0): DPMS enabled (--) SIS(0): Hardware supports one video overlay (II) SIS(0): Using SiS300/315/330/340/350 series HW Xv by default on CRT2 (II) SIS(0): Default Xv adaptor is Video Overlay (II) SIS(0): [DRI] installation complete (II) SIS(0): Direct rendering enabled (II) SIS(0): Initialized SISCTRL extension version 0.1 (II) SIS(0): Registered screen 0 with SISCTRL extension version 0.1 (==) RandR enabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE SELinux: Disabled on system, not enabling in X server (II) AIGLX: Screen 0 is not DRI2 capable drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: Searching for BusID pci:0000:01:00.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: drmOpenMinor returns 11 drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 (EE) AIGLX error: dlopen of /usr/lib/dri/sis671_dri.so failed (/usr/lib/dri/sis671_dri.so: cannot open shared object file: No such file or directory) (EE) AIGLX: reverting to software rendering (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 (II) config/hal: Adding input device AT Translated Set 2 keyboard (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.6.3, module version = 2.2.5 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "fscaa1667g" (**) Option "xkb_layout" "gb" (**) Option "xkb_options" "terminate:ctrl_alt_bksp" (II) config/hal: Adding input device Video Bus (**) Video Bus: always reports core events (**) Video Bus: Device: "/dev/input/event5" (II) Video Bus: Found keys (II) Video Bus: Configuring as keyboard (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "fscaa1667g" (**) Option "xkb_layout" "gb" (**) Option "xkb_options" "terminate:ctrl_alt_bksp" (II) config/hal: Adding input device Sleep Button (CM) (**) Sleep Button (CM): always reports core events (**) Sleep Button (CM): Device: "/dev/input/event4" (II) Sleep Button (CM): Found keys (II) Sleep Button (CM): Configuring as keyboard (II) XINPUT: Adding extended input device "Sleep Button (CM)" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "fscaa1667g" (**) Option "xkb_layout" "gb" (**) Option "xkb_options" "terminate:ctrl_alt_bksp" (II) config/hal: Adding input device Power Button (CM) (**) Power Button (CM): always reports core events (**) Power Button (CM): Device: "/dev/input/event3" (II) Power Button (CM): Found keys (II) Power Button (CM): Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button (CM)" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "fscaa1667g" (**) Option "xkb_layout" "gb" (**) Option "xkb_options" "terminate:ctrl_alt_bksp" (II) config/hal: Adding input device Power Button (FF) (**) Power Button (FF): always reports core events (**) Power Button (FF): Device: "/dev/input/event1" (II) Power Button (FF): Found keys (II) Power Button (FF): Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button (FF)" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "fscaa1667g" (**) Option "xkb_layout" "gb" (**) Option "xkb_options" "terminate:ctrl_alt_bksp" (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad (II) LoadModule: "synaptics" (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so (II) Module synaptics: vendor="X.Org Foundation" compiled for 1.6.1.901, module version = 1.1.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (II) Synaptics touchpad driver version 1.1.2 (**) Option "Device" "/dev/input/event6" (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255 (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0 (II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple (--) SynPS/2 Synaptics TouchPad: touchpad found (**) SynPS/2 Synaptics TouchPad: always reports core events (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD) (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 (**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00 (**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms (**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0 (--) SynPS/2 Synaptics TouchPad: touchpad found
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Device"
Identifier "Configured Video Device"
Driver "sisimedia"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
signature.asc
Description: This is a digitally signed message part.
