Package: wodim
Version: 9:1.1.9-1
Severity: important
I tried to write a DVD-R with wodim on a new LG GH22LP20
which failed everytime. I can read DVD/CD without any
problems and write CD-R with this writer.
I also tried cdrecord from recent cdrtools 2.01.01a63 with
which I could burn a DVD-R (same disk type and manufacturer).
Although it gave me a few warnings, including predicted buffer
underruns, but i couldn't make out any errors on the burned
medium, md5sums for image and DVD matched also.
Outputs and commandline options for wodim and cdrecord:
wodim:
-------------------------------------------------------------
$ sudo wodim -v -dao -eject -gracetime=10 -dev=/dev/hdc driveropts=burnfree
image.iso
TOC Type: 1 = CD-ROM
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.9
Driveropts: 'burnfree'
SCSI buffer size: 64512
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVD-RAM GH22LP20'
Revision : '1.02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0011 (DVD-R sequential recording)
Profile: 0x0012 (DVD-RAM)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0011 (DVD-R sequential recording) (current)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1409024 = 1376 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Drive DMA Speed: 153600 kB/s 872x CD 110x DVD
FIFO size : 12582912 = 12288 KB
Track 01: data 2385 MB
Total size: 2740 MB (271:28.37) = 1221628 sectors
Lout start: 2740 MB (271:30/28) = 1221628 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 1076868
Speed set to 11080 KB/s
Starting to write CD/DVD at speed 8.0 in real SAO mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 0
Track 01: 0 of 2385 MB written.Errno: 0 (Success), write_g1 scsi sendcmd: no
error
CDB: 2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 02 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 0.000s timeout 200s
write track data: error after 0 bytes
wodim: A write error occured.
wodim: Please properly read the error message above.
Writing time: 12.523s
Average write speed 111.0x.
Fixating...
Fixating time: 0.002s
wodim: fifo had 192 puts and 1 gets.
wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
------------------------------------------------------------------
cdrecord:
-----------------------------------------------------------------
$ sudo /home/martin/cdrtools-2.01.01/cdrecord/OBJ/i686-linux-cc/cdrecord -v
-sao -eject dev=1001,0,0 driveropts=burnfree image.iso
Cdrecord-ProDVD-ProBD-Clone 2.01.01a63 (i686-pc-linux-gnu) Copyright (C)
1995-2009 J�rg Schilling
TOC Type: 1 = CD-ROM
scsidev: '1001,0,0'
scsibus: 1001 target: 0 lun: 0
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.9'.
Driveropts: 'burnfree'
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVD-RAM GH22LP20'
Revision : '1.02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: DVD-R sequential recording
Profile: DVD-RAM
Profile: DVD+R/DL
Profile: DVD+R
Profile: DVD+RW
Profile: DVD-R/DL layer jump recording
Profile: DVD-R/DL sequential recording
Profile: DVD-RW sequential recording
Profile: DVD-RW restricted overwrite
Profile: DVD-R sequential recording (current)
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
Profile: Removable Disk
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd).
Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: PACKET SAO LAYER_JUMP
Drive buf size : 1409024 = 1376 KB
/home/martin/cdrtools-2.01.01/cdrecord/OBJ/i686-linux-cc/cdrecord: Warning: The
DMA speed test has been skipped.
FIFO size : 4194304 = 4096 KB
Track 01: data 2385 MB
Total size: 2385 MB = 1221628 sectors
Current Secsize: 2048
WARNING: Phys disk size 2298496 differs from rzone size 0! Prerecorded disk?
WARNING: Phys start: 196608 Phys end 2495103
WARNING: Drive returns zero media size. Using media size from ADIP.
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 1076868
Reducing transfer size from 64512 to 32768 bytes.
Starting to write CD/DVD/BD at speed 8 in real SAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Starting new track at sector: 0
Track 01: 2385 of 2385 MB written (fifo 100%) [buf 0%] 8.0x.
Track 01: Total bytes read/written: 2501894144/2501894144 (1221628 sectors).
Writing time: 342.519s
Average write speed 5.3x.
Min drive buffer fill was 0%
Total of 1216 possible drive buffer underruns predicted.
Fixating...
Fixating time: 28.854s
/home/martin/cdrtools-2.01.01/cdrecord/OBJ/i686-linux-cc/cdrecord: fifo had
76352 puts and 76352 gets.
/home/martin/cdrtools-2.01.01/cdrecord/OBJ/i686-linux-cc/cdrecord: fifo was 0
times empty and 12576 times full, min fill was 67%.
------------------------------------------------------------------------
cdrecord reports the contents of an empty DVD-R i use as follows:
----------------------------------------------------------------------
$ sudo /home/martin/cdrtools-2.01.01/cdrecord/OBJ/i686-linux-cc/cdrecord -minfo
dev=1001,0,0
Cdrecord-ProDVD-ProBD-Clone 2.01.01a63 (i686-pc-linux-gnu) Copyright (C)
1995-2009 J�rg Schilling
scsidev: '1001,0,0'
scsibus: 1001 target: 0 lun: 0
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.9'.
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVD-RAM GH22LP20'
Revision : '1.02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd).
Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: PACKET SAO LAYER_JUMP
/home/martin/cdrtools-2.01.01/cdrecord/OBJ/i686-linux-cc/cdrecord: Warning: The
DMA speed test has been skipped.
WARNING: Phys disk size 2298496 differs from rzone size 0! Prerecorded disk?
WARNING: Phys start: 196608 Phys end 2495103
WARNING: Drive returns zero media size. Using media size from ADIP.
Mounted media class: DVD
Mounted media type: DVD-R sequential recording
Disk Is not erasable
data type: standard
disk status: empty
session status: empty
BG format status: none
first track: 1
number of sessions: 1
first track in last sess: 1
last track in last sess: 1
Disk Is unrestricted
Disk type: DVD, HD-DVD or BD
Track Sess Type Start Addr End Addr Size
==============================================
1 1 Audio 0 -1 0
Last session start address: 0
Last session leadout start address: 0
--------------------------------------------------------------
These DVD-R are unused and new.
Best Regards,
Martin
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.30
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages wodim depends on:
ii libc6 2.9-23 GNU C Library: Shared libraries
ii libcap2 1:2.16-5 support for getting/setting POSIX.
Versions of packages wodim recommends:
ii genisoimage 9:1.1.9-1 Creates ISO-9660 CD-ROM filesystem
Versions of packages wodim suggests:
pn cdrkit-doc <none> (no description available)
-- no debconf information
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
