Package: linux-image-2.6.26-1-486 Followup-For: Bug #441847
Sorry about the late reply. I did not get to testing this. It seems to be fixed with linux 2.6.26 - the SATA disk is slighly faster than the IDE disk which should be expected because it's the newest drive but the system is overloaded so it cannot fully utilize the drive speed. Thanks Michal -- Package-specific info: ** Version: Linux version 2.6.26-1-486 (Debian 2.6.26-13) (michal.sucha...@ruk.cuni.cz) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 Thu Feb 12 00:35:28 CET 2009 ** Command line: initrd=initrd1.img boot=live xdebconf g username=ghost hostname=debian-ghost union=aufs quickreboot httpfs=http://195.113.15.10/filesystem.squashfs vga=792 splash quiet BOOT_IMAGE=vmlinuz1 ** Not tainted ** Kernel log: [ 7.332269] ehci_hcd 0000:00:10.4: irq 21, io mem 0xe6000000 [ 7.344032] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 7.344119] usb usb5: configuration #1 chosen from 1 choice [ 7.344149] hub 5-0:1.0: USB hub found [ 7.344159] hub 5-0:1.0: 8 ports detected [ 7.448088] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.448092] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.448095] usb usb5: Product: EHCI Host Controller [ 7.448097] usb usb5: Manufacturer: Linux 2.6.26-1-486 ehci_hcd [ 7.448100] usb usb5: SerialNumber: 0000:00:10.4 [ 7.448421] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23 [ 7.448429] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 23 [ 7.448759] eth0: VIA Rhine II at 0x1ec00, 00:13:d3:a5:a3:77, IRQ 23. [ 7.449471] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link c5e1. [ 7.453954] sata_via 0000:00:0f.0: version 2.3 [ 7.453981] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 7.454031] sata_via 0000:00:0f.0: routed to hard irq line 11 [ 7.454104] scsi0 : sata_via [ 7.454190] scsi1 : sata_via [ 7.454223] ata1: SATA max UDMA/133 cmd 0xe000 ctl 0xe100 bmdma 0xe400 irq 20 [ 7.454226] ata2: SATA max UDMA/133 cmd 0xe200 ctl 0xe300 bmdma 0xe408 irq 20 [ 7.489714] hda: max request size: 128KiB [ 7.489967] hda: 40718160 sectors (20847 MB) w/2048KiB Cache, CHS=40395/16/63 [ 7.490354] hda: cache flushes supported [ 7.490406] hda: hda1 hda2 hda3 < hda5 > [ 7.527126] hdc: max request size: 128KiB [ 7.545682] hdc: 30003120 sectors (15361 MB) w/1916KiB Cache, CHS=31749/15/63 [ 7.545689] hdc: cache flushes not supported [ 7.545743] hdc: [ 7.656016] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7.820349] ata1.00: ATA-6: ST380817AS, 3.42, max UDMA/133 [ 7.820355] ata1.00: 156301488 sectors, multi 1: LBA48 NCQ (not used) [ 7.836324] ata1.00: configured for UDMA/133 [ 8.040011] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 8.040121] scsi 0:0:0:0: Direct-Access ATA ST380817AS 3.42 PQ: 0 ANSI: 5 [ 8.063795] Driver 'sd' needs updating - please use bus_type methods [ 8.063917] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 8.063931] sd 0:0:0:0: [sda] Write Protect is off [ 8.063935] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 8.063956] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.064002] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 8.064020] sd 0:0:0:0: [sda] Write Protect is off [ 8.064023] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 8.064044] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.064047] sda: sda1 sda2 [ 8.068501] sd 0:0:0:0: [sda] Attached SCSI disk [ 8.288781] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 8.288790] ide_generic: I/O resource 0x1F0-0x1F7 not free. [ 8.290326] ide_generic: I/O resource 0x170-0x177 not free. [ 8.652036] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 8.828066] usb 3-1: configuration #1 chosen from 1 choice [ 8.831084] usb 3-1: New USB device found, idVendor=046d, idProduct=c063 [ 8.831088] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.831091] usb 3-1: Product: DELL USB Laser Mouse [ 8.831094] usb 3-1: Manufacturer: DELL [ 9.068081] usb 4-1: new low speed USB device using uhci_hcd and address 2 [ 9.244498] usb 4-1: configuration #1 chosen from 1 choice [ 9.257543] usb 4-1: New USB device found, idVendor=04a5, idProduct=7003 [ 9.257548] usb 4-1: New USB device strings: Mfr=4, Product=20, SerialNumber=0 [ 9.257552] usb 4-1: Product: Generic USB Keyboard [ 9.257555] usb 4-1: Manufacturer: NOVATEK [ 9.361001] usbcore: registered new interface driver hiddev [ 9.378852] input: DELL DELL USB Laser Mouse as /class/input/input0 [ 9.378852] input,hidraw0: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:10.2-1 [ 9.393471] input: NOVATEK Generic USB Keyboard as /class/input/input1 [ 9.393471] input,hidraw1: USB HID v1.10 Keyboard [NOVATEK Generic USB Keyboard] on usb-0000:00:10.3-1 [ 9.393471] usbcore: registered new interface driver usbhid [ 9.393471] usbhid: v2.6:USB HID core driver [ 9.493505] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ 10.520959] fuse init (API version 7.9) [ 10.542751] aufs 20080714 [ 10.565787] loop: module loaded [ 10.638445] squashfs: version 3.3-CVS (2008/04/04) Phillip Lougher [ 26.927040] udevd version 125 started [ 29.252205] Linux agpgart interface v0.103 [ 29.289098] agpgart: Detected AGP bridge 0 [ 29.306265] agpgart: AGP aperture is 512M @ 0xc0000000 [ 29.435273] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 29.436983] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 29.989746] input: Power Button (FF) as /class/input/input2 [ 30.016106] ACPI: Power Button (FF) [PWRF] [ 30.016188] input: Power Button (CM) as /class/input/input3 [ 30.040224] ACPI: Power Button (CM) [PWRB] [ 31.409585] input: PC Speaker as /class/input/input4 [ 31.978082] parport_pc 00:0b: reported by Plug and Play ACPI [ 31.978136] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 32.048632] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [ 32.048641] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22 [ 32.048784] PCI: Setting latency timer of device 0000:00:11.5 to 64 [ 34.289870] device-mapper: uevent: version 1.0.3 [ 34.290840] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-de...@redhat.com [ 39.283857] NET: Registered protocol family 10 [ 39.284388] lo: Disabled Privacy Extensions [ 47.945724] [drm] Initialized drm 1.1.0 20060810 [ 47.960895] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 47.961029] [drm] Initialized via 2.11.1 20070202 on minor 0 [ 47.970153] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. [ 47.970179] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [ 47.970242] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [ 49.748015] eth0: no IPv6 routers present ** Loaded modules: Module Size Used by via 34304 1 drm 64672 2 via ipv6 225172 8 dm_crypt 11012 0 crypto_blkcipher 14724 1 dm_crypt dm_mod 45384 1 dm_crypt md_mod 65940 0 snd_via82xx 20248 0 gameport 10504 1 snd_via82xx snd_ac97_codec 88228 1 snd_via82xx ac97_bus 1664 1 snd_ac97_codec snd_pcm_oss 32544 0 snd_mixer_oss 12288 1 snd_pcm_oss snd_pcm 60680 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss parport_pc 22436 0 snd_page_alloc 7816 2 snd_via82xx,snd_pcm snd_mpu401_uart 6400 1 snd_via82xx parport 30408 1 parport_pc snd_seq_dummy 2692 0 pcspkr 2304 0 snd_seq_oss 24832 0 snd_seq_midi 5664 0 snd_rawmidi 18592 2 snd_mpu401_uart,snd_seq_midi k8temp 4096 0 snd_seq_midi_event 6528 2 snd_seq_oss,snd_seq_midi snd_seq 40784 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event i2c_viapro 6804 0 snd_timer 17668 2 snd_pcm,snd_seq snd_seq_device 6412 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq i2c_core 19728 1 i2c_viapro snd 44964 11 snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 6112 1 snd button 6032 0 shpchp 25496 0 pci_hotplug 23204 1 shpchp amd64_agp 8836 1 agpgart 28336 2 drm,amd64_agp evdev 7808 3 battery 10116 0 squashfs 35976 1 zlib_inflate 14080 1 squashfs loop 12428 2 aufs 108304 1 exportfs 3712 1 aufs fuse 41116 3 usbhid 35712 0 hid 32128 1 usbhid ff_memless 4232 1 usbhid ide_generic 2432 0 [permanent] sd_mod 22032 1 ide_disk 10496 2 sata_via 6916 1 floppy 47620 0 via_rhine 18184 0 mii 4864 1 via_rhine ata_generic 4612 0 ehci_hcd 28300 0 libata 141088 2 sata_via,ata_generic uhci_hcd 18448 0 usbcore 117616 4 usbhid,ehci_hcd,uhci_hcd via82cxxx 6916 0 [permanent] scsi_mod 129804 2 sd_mod,libata dock 8076 1 libata ide_pci_generic 3844 0 [permanent] ide_core 95144 4 ide_generic,ide_disk,via82cxxx,ide_pci_generic thermal 15132 0 processor 28080 1 thermal fan 4100 0 thermal_sys 10784 3 thermal,processor,fan atl2 22424 0 ** PCI devices: 00:00.0 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:0204] Subsystem: VIA Technologies, Inc. K8M800 Host Bridge [1106:0204] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 8 Region 0: Memory at c0000000 (32-bit, prefetchable) [size=512M] Capabilities: <access denied> Kernel driver in use: agpgart-amd64 Kernel modules: amd64-agp 00:00.1 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:1204] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:00.2 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:2204] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:00.3 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:3204] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:00.4 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:4204] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:00.7 Host bridge [0600]: VIA Technologies, Inc. K8M800 Host Bridge [1106:7204] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] [1106:b188] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: e4000000-e5ffffff Prefetchable memory behind bridge: e0000000-e3ffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+ BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel modules: shpchp 00:0f.0 IDE interface [0101]: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149] (rev 80) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Micro-Star International Co., Ltd. K8MM3-V mainboard [1462:7181] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin B routed to IRQ 20 Region 0: I/O ports at e000 [size=8] Region 1: I/O ports at e100 [size=4] Region 2: I/O ports at e200 [size=8] Region 3: I/O ports at e300 [size=4] Region 4: I/O ports at e400 [size=16] Region 5: I/O ports at e500 [size=256] Capabilities: <access denied> Kernel driver in use: sata_via Kernel modules: sata_via 00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: Micro-Star International Co., Ltd. K8MM3-V mainboard [1462:7181] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 20 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at e600 [size=16] Capabilities: <access denied> Kernel driver in use: VIA_IDE Kernel modules: via82cxxx 00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd. K8MM3-V mainboard [1462:7181] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 21 Region 4: I/O ports at e700 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd. K8MM3-V mainboard [1462:7181] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 21 Region 4: I/O ports at e800 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd. K8MM3-V mainboard [1462:7181] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at e900 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd. K8MM3-V mainboard [1462:7181] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at ea00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86) (prog-if 20 [EHCI]) Subsystem: Micro-Star International Co., Ltd. K8MM3-V mainboard [1462:7181] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 21 Region 0: Memory at e6000000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] [1106:3227] Subsystem: VIA Technologies, Inc. DFI KT600-AL / Soltek SL-B9D-FGR Motherboard [1106:3227] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: i2c-viapro 00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60) Subsystem: Micro-Star International Co., Ltd. K8MM3-V mainboard [1462:7181] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 22 Region 0: I/O ports at eb00 [size=256] Capabilities: <access denied> Kernel driver in use: VIA 82xx Audio Kernel modules: snd-via82xx 00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 78) Subsystem: Micro-Star International Co., Ltd. K8MM3-V mainboard [1462:7181] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 23 Region 0: I/O ports at ec00 [size=256] Region 1: Memory at e6001000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: via-rhine Kernel modules: via-rhine 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: k8temp Kernel modules: k8temp 01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. K8M800/K8N800/K8N800A [S3 UniChrome Pro] [1106:3108] (rev 01) (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. Device [1462:7181] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min) Interrupt: pin A routed to IRQ 16 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M] Region 1: Memory at e4000000 (32-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at e5000000 [disabled] [size=64K] Capabilities: <access denied> -- System Information: Debian Release: 5.0 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-486 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.26-1-486 depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo linux-image-2.6.26-1-486 recommends no packages. Versions of packages linux-image-2.6.26-1-486 suggests: ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v ii lilo 1:22.8-7 LInux LOader - The Classic OS load pn linux-doc-2.6.26 <none> (no description available) -- debconf information excluded -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
