Package: installation-reports INSTALL REPORT
Debian-installer-version: 07 Jun 2005 DVD set purchased from DebianShop uname -a: Linux zamora 2.4.27-2-k7 #1 Mon May 16 17:18:17 JST 2005 i686 GNU/Linux Date: Mon Jul 11 15:18:58 BST 2005 Method: Bootable DVD purchased from DebianShop Machine: homebuilt Processor: AMD K7 900MHz Memory: 256 MB Root Device: IDE (Ultra-ATA 100) /dev/hde Root Size/partition table: # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 /dev/hde1 / ext3 defaults,errors=remount-ro 0 1 /dev/hde9 /home ext3 defaults 0 2 /dev/hde8 /tmp ext3 defaults 0 2 /dev/hde5 /usr ext3 defaults 0 2 /dev/hde6 /var ext3 defaults 0 2 /dev/hde7 none swap sw 0 0 /dev/hdc /media/cdrom0 iso9660 ro,user,noauto 0 0 /dev/hda /media/cdrom1 iso9660 ro,user,noauto 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto 0 0 Output of lspci and lspci -n: zamora:~# lspci 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 02) 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] 0000:00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22) 0000:00:04.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 10) 0000:00:04.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 10) 0000:00:04.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 10) 0000:00:04.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30) 0000:00:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 05) 0000:00:0a.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 05) 0000:00:0d.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30) 0000:00:11.0 Unknown mass storage controller: Promise Technology, Inc. PDC20265 (FastTrak100 Lite/Ultra100) (rev 02) 0000:01:00.0 VGA compatible controller: nVidia Corporation NV20 [GeForce3 Ti 200] (rev a3) zamora:~# lspci -n 0000:00:00.0 0600: 1106:0305 (rev 02) 0000:00:01.0 0604: 1106:8305 0000:00:04.0 0601: 1106:0686 (rev 22) 0000:00:04.1 0101: 1106:0571 (rev 10) 0000:00:04.2 0c03: 1106:3038 (rev 10) 0000:00:04.3 0c03: 1106:3038 (rev 10) 0000:00:04.4 0600: 1106:3057 (rev 30) 0000:00:0a.0 0401: 1102:0002 (rev 05) 0000:00:0a.1 0980: 1102:7002 (rev 05) 0000:00:0d.0 0200: 10b7:9055 (rev 30) 0000:00:11.0 0180: 105a:0d30 (rev 02) 0000:01:00.0 0300: 10de:0201 (rev a3) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [O] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: This is my first Debian installation, so I guess time will tell if I have any problems. At this time, all seems fine. Install logs and other status info is available in /var/log/debian-installer/. Once you have filled out this report, mail it to [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
