Package: mdadm
Version: 2.6.7.2-1
The spare-group functionality of mdadm does not work if the arrays
are using version 1.2 metadata. This problem was originally observed
on a CentOS 5.2 system, so I ran up a test Lenny box, only to
discover that the same problem exists. Neil Brown seems to have a fix,
which I have included below.
I have defined 3 5-disk raid-5 arrays with version 1.2 metadata.
Two of them have only 5 drives, the third has 3 spare drives.
All are in the same spare-group.
This is /proc/mdstat:
+--------------------
Personalities : [raid6] [raid5] [raid4]
md2 : active raid5 sdc10[5](S) sdc5[0] sdc11[6](S) sdc12[7](S) sdc9[8]
sdc8[3] sdc7[2] sdc6[1]
3212288 blocks super 1.2 level 5, 128k chunk, algorithm 2 [5/5]
[UUUUU]
md1 : active raid5 sdb10[0] sdb14[5] sdb13[3] sdb12[2] sdb11[1]
3212800 blocks super 1.2 level 5, 128k chunk, algorithm 2 [5/5]
[UUUUU]
md0 : active raid5 sdb9[5] sdb5[0] sdb8[3] sdb7[2] sdb6[1]
3212288 blocks super 1.2 level 5, 128k chunk, algorithm 2 [5/5]
[UUUUU]
unused devices: <none>
+--------------------
This is /etc/mdadm/mdadm.conf:
+-----------------------------
# definitions for RAID arrays
DEVICE /dev/sdb[56789]
DEVICE /dev/sdb1[01234]
DEVICE /dev/sdc[56789]
DEVICE /dev/sdc1[012]
CREATE metadata=1.2
ARRAY /dev/md0 name=bucket1
devices=/dev/sdb[56789]
spare-group=bucketgang
ARRAY /dev/md1 name=bucket2
devices=/dev/sdb1[01234]
spare-group=bucketgang
ARRAY /dev/md2 name=bucket3 level=raid5 num-devices=5 spares=3
devices=/dev/sdc[56789],/dev/sdc1[012]
spare-group=bucketgang
MAILADDR choh...@timmins.ca
MAILFROM mdmonitor
+-----------------------------
The mdadm --monitor process is running, as started from init.d
Issuing "mdadm --fail /dev/md0 /dev/sdb9" generates, in part,
these entries in syslog:
+-----------------------------
md: unbind<sdc10>
md: export_rdev(sdc10)
md0: HOT_ADD may only be used with version-0 superblocks.
md2: HOT_ADD may only be used with version-0 superblocks.
+-----------------------------
This repeats to pull the other 2 spares out of md2, fails to
add them to md0, and fails to put them back into md2.
I wind up with a degraded array, and no spares left.
A search of the linux-raid mailing list discovered the following patch.
Note that I checked the source for mdadm version 2.6.9-3 in unstable
and it does not have this patch applied, either. I applied the patches below
and they seem to resolve the issue. This would have been easier if I
really knew what I was doing....
regards,
Carl Hohman
choh...@timmins.ca
+===========================================================================
=====
List: linux-raid
Subject: Re: Spare fails to transfer between RAID groups
From: Neil Brown <neilb () suse ! de>
Date: 2009-05-11 23:30:21
Message-ID: 18952.46349.611683.608352 () notabene ! brown
[Download message RAW]
On Sunday May 10, ga...@grsweb.us wrote:
> Hi raiders --
>
> I'm having a problem getting a spare partition moved to the right RAID
group
> after a failure. I see some past discussion of issues related to spare
> groups in the list archive, but no exact fit for the behavior I'm seeing.
> Here's the outline:
>
> 1) Two RAID arrays (/dev/md_d0 and /dev/md_d3) are assigned to one
> spare-group in /etc/mdadm/mdadm.conf. The spare partition is initially
> assigned to /dev/md_d0.
>
...
> 6) Two error messages are submitted via syslog to /var/log/kern.log in
quick
> succession, both with the same message: "HOT_ADD may only be used with
> version-0 superblocks". The first message is tagged "md_d3" and the second
> "md_d0".
>
....
>
> All superblocks involved are version 1.2. This is a new setup, and every
> mdadm --create command has included --metadata=1.2. There should be no
> legacy or old RAID superblocks around.
>
This would be because no one has tried the spare-group feature with
1.x metadata yet. You are the first (or the first to report when it
failed at least).
The following patch should make it work for you. This patch is against
2.6.9, though it should apply to any reasonably recent 2.x mdadm.
(it won't apply to 3.0).
Please let me know if it works for you.
Thanks for the report,
NeilBrown
diff --git a/Manage.c b/Manage.c
index 33a0bc7..fa4bb60 100644
--- a/Manage.c
+++ b/Manage.c
@@ -292,11 +292,15 @@ int Manage_subdevs(char *devname, int fd,
} else {
j = 0;
- if (stat(dv->devname, &stb)) {
+ tfd = dev_open(dv->devname, O_RDONLY);
+ if (tfd < 0 || fstat(tfd, &stb) != 0) {
fprintf(stderr, Name ": cannot find %s: %s\n",
dv->devname, strerror(errno));
+ if (tfd >= 0)
+ close(tfd);
return 1;
}
+ close(tfd);
if ((stb.st_mode & S_IFMT) != S_IFBLK) {
fprintf(stderr, Name ": %s is not a "
"block device.\n",
@@ -313,7 +317,7 @@ int Manage_subdevs(char *devname, int fd,
/* add the device */
/* Make sure it isn't in use (in 2.6 or later) */
- tfd = open(dv->devname, O_RDONLY|O_EXCL);
+ tfd = dev_open(dv->devname, O_RDONLY|O_EXCL);
if (tfd < 0) {
fprintf(stderr, Name ": Cannot open %s: %s\n",
dv->devname, strerror(errno));
diff --git a/Monitor.c b/Monitor.c
index 3825600..e0a9d2a 100644
--- a/Monitor.c
+++ b/Monitor.c
@@ -470,16 +470,25 @@ int Monitor(mddev_dev_t devlist,
}
}
if (dev > 0) {
- if (ioctl(fd2,
HOT_REMOVE_DISK,
- (unsigned
long)dev) == 0) {
- if (ioctl(fd1,
HOT_ADD_DISK,
-
(unsigned long)dev) == 0) {
+ struct mddev_dev_s
devlist;
+ char devname[20];
+ devlist.next = NULL;
+ devlist.used = 0;
+ devlist.re_add = 0;
+ devlist.writemostly = 0;
+ devlist.devname =
devname;
+ sprintf(devname,
"%d:%d", major(dev), minor(dev));
+
+ devlist.disposition =
'r';
+ if
(Manage_subdevs(st2->devname, fd2, &devlist, -1) == 0) {
+
devlist.disposition = 'a';
+ if
(Manage_subdevs(st->devname, fd1, &devlist, -1) == 0) {
alert("MoveSpare", st->devname, st2->devname, mailaddr, mailfrom,
alert_cmd, dosyslog);
close(fd1);
close(fd2);
break;
}
- else ioctl(fd2,
HOT_ADD_DISK, (unsigned long) dev);
+ else
Manage_subdevs(st2->devname, fd2, &devlist, -1);
}
}
close(fd1);
diff --git a/super0.c b/super0.c
index 90fdf23..ebba534 100644
--- a/super0.c
+++ b/super0.c
@@ -672,7 +672,7 @@ static int write_init_super0(struct supertype *st,
mdu_disk_info_t *dinfo, char *devname)
{
mdp_super_t *sb = st->sb;
- int fd = open(devname, O_RDWR|O_EXCL);
+ int fd = dev_open(devname, O_RDWR|O_EXCL);
int rv;
if (fd < 0) {
diff --git a/super1.c b/super1.c
index 037c5eb..b86a28b 100644
--- a/super1.c
+++ b/super1.c
@@ -887,7 +887,7 @@ static int write_init_super1(struct supertype *st,
{
struct mdp_superblock_1 *sb = st->sb;
struct supertype refst;
- int fd = open(devname, O_RDWR | O_EXCL);
+ int fd = dev_open(devname, O_RDWR | O_EXCL);
int rfd;
int rv;
int bm_space;
--
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
