Package: lm-sensors Version: 1:3.0.2-1+b2 Severity: important
It seems I can cause my system to spontaneously reboot by continually polling the 'sensors' command (eg. with `watch sensors`) for long periods. I get the following errors: May 23 16:10:13 tank kernel: [18847.999540] ACPI: Critical trip point May 23 16:10:13 tank kernel: [18847.999569] ACPI: Unable to turn cooling device [ffff8101af06f8b0] 'on' Sometimes they are repeated, sometimes not. My system turns off shortly after on its own. This bug has only occurred since I started using lm-sensors, and I found mention of a similar conflict online, hence my diagnosis. Upstream bug at http://www.lm-sensors.org/ticket/2072 I suspect (closed as WONTFIX, but no warnings are issued, yadda yadda). Output of lsmod: parport_pc 31016 0 lp 14724 0 parport 41776 3 ppdev,parport_pc,lp autofs4 24200 1 ipv6 288328 30 bridge 53544 0 nls_utf8 6272 6 ntfs 188416 2 nls_base 12932 3 cifs,nls_utf8,ntfs dm_snapshot 19400 0 dm_mirror 20608 0 dm_log 13956 1 dm_mirror dm_mod 58864 3 dm_snapshot,dm_mirror,dm_log coretemp 11008 0 w83627ehf 26512 0 hwmon_vid 7296 1 w83627ehf tun 14084 0 kvm_intel 39776 0 kvm 127464 1 kvm_intel loop 19468 0 snd_emu10k1_synth 10752 0 joydev 14848 0 wacom 22144 0 snd_emux_synth 36864 1 snd_emu10k1_synth snd_seq_virmidi 10112 1 snd_emux_synth snd_seq_midi_emul 10496 1 snd_emux_synth snd_hda_intel 434904 0 snd_seq_dummy 7428 0 snd_emu10k1 141536 3 snd_emu10k1_synth snd_seq_oss 33152 0 firmware_class 12544 1 snd_emu10k1 snd_ac97_codec 115416 1 snd_emu10k1 ac97_bus 6272 1 snd_ac97_codec snd_seq_midi 11072 0 snd_pcm_oss 41760 0 snd_mixer_oss 18816 1 snd_pcm_oss snd_rawmidi 26784 3 snd_seq_virmidi,snd_emu10k1,snd_seq_midi snd_seq_midi_event 11904 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi snd_pcm 81672 5 snd_hda_intel,snd_emu10k1,snd_ac97_codec,snd_pcm_oss snd_seq 54304 9 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_seq_device 11668 8 snd_emu10k1_synth,snd_emux_synth,snd_seq_dummy,snd_emu10k1,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq snd_timer 25744 3 snd_emu10k1,snd_pcm,snd_seq snd_util_mem 8960 2 snd_emux_synth,snd_emu10k1 i2c_i801 13596 0 emu10k1_gp 7552 0 usb_storage 94528 0 snd_hwdep 12040 2 snd_emux_synth,snd_emu10k1 i2c_core 27936 1 i2c_i801 pcspkr 7040 0 usbhid 45792 0 snd 63688 17 snd_emux_synth,snd_seq_virmidi,snd_hda_intel,snd_emu10k1,snd_seq_oss,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_rawmidi,snd_pcm,snd_seq,snd_seq_device,snd_timer,snd_hwdep hid 41792 1 usbhid usblp 16896 0 gameport 17040 2 emu10k1_gp iTCO_wdt 15696 0 ff_memless 9224 1 usbhid soundcore 12064 1 snd snd_page_alloc 13072 3 snd_hda_intel,snd_emu10k1,snd_pcm button 11680 0 intel_agp 31728 0 evdev 14208 10 ext3 125072 3 jbd 51240 1 ext3 mbcache 12804 1 ext3 sg 36448 0 sr_mod 19652 0 cdrom 37928 1 sr_mod sd_mod 29376 7 ata_generic 10116 0 ata_piix 22660 6 libata 165472 2 ata_generic,ata_piix scsi_mod 160760 5 usb_storage,sg,sr_mod,sd_mod,libata dock 14112 1 libata ohci1394 32564 0 ide_pci_generic 9220 0 [permanent] floppy 61672 0 ide_core 128284 1 ide_pci_generic ieee1394 93816 1 ohci1394 r8169 31492 0 ehci_hcd 36108 0 uhci_hcd 25760 0 thermal 22688 0 processor 42304 1 thermal fan 9352 0 thermal_sys 17728 3 thermal,processor,fan -- System Information: Debian Release: 5.0 APT prefers stable APT policy: (990, 'stable'), (800, 'testing'), (700, 'unstable'), (600, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores) Locale: LANG=en_GB.utf8, LC_CTYPE=en_GB.utf8 (charmap=UTF-8) (ignored: LC_ALL set to en_GB.utf8) Shell: /bin/sh linked to /bin/bash Versions of packages lm-sensors depends on: ii libc6 2.7-18 GNU C Library: Shared libraries ii libsensors4 1:3.0.2-1+b2 library to read temperature/voltag ii perl 5.10.0-19 Larry Wall's Practical Extraction ii sed 4.1.5-6 The GNU sed stream editor lm-sensors recommends no packages. Versions of packages lm-sensors suggests: pn i2c-tools <none> (no description available) pn read-edid <none> (no description available) pn sensord <none> (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
