Package: linux-image-2.6.26-1-amd64
Version: 2.6.26-13
Severity: normal
Hi; I had an ACPI critical temperature error which caused a reboot
(probably a different bug to this one), and so started looking at my
temperatures. Notably, my "coretemp" readings are worryingly high - on
the stock cooler I currently have:
CPU Temp: +49.5C (high = +80.0C, hyst = +75.0C) sensor = diode
Core 0: +78.0C (high = +78.0C, crit = +100.0C)
Core 1: +78.0C (high = +78.0C, crit = +100.0C)
(Read while burnP6 is running twice and my big 120mm fan is blasting
the CPU HSF.)
The first is from w83627ehf sensor on my ABIT IB9 motherboard (i965).
Worried about this, I tried the 2.6.25 kernel (same results). That kernel
is not tainted by fglrx.
BIOS seems to agree roughly with the CPU temp. Booting Windows and
running SpeedFan also agrees with this, however Speedfan reports the
core temperatures to be around 60-62C while running the Windows burnP6
twice under the same conditions.
I theorise that coretemp is overestimating by 15-20C for some reason.
I'm told that those temperatures should never be more than 15 or so
degrees higher than the BIOS reported one.
-- Package-specific info:
** Version:
Linux version 2.6.26-1-amd64 (Debian 2.6.26-13) (wa...@debian.org) (gcc version
4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 17:57:00 UTC
2009
** Command line:
root=/dev/sda5 ro irqpoll
** Tainted: P (1)
** Kernel log:
[ 7.197309] usbcore: registered new interface driver hiddev
[ 7.301716] scsi4 : SCSI emulation for USB Mass Storage devices
[ 7.301716] usbcore: registered new interface driver usb-storage
[ 7.301716] USB Mass Storage support registered.
[ 7.310690] input: Microsoft Natural� Ergonomic Keyboard 4000 as
/class/input/input2
[ 7.314683] usb-storage: device found at 8
[ 7.314685] usb-storage: waiting for device to settle before scanning
[ 7.335539] input,hidraw0: USB HID v1.11 Keyboard [Microsoft Natural�
Ergonomic Keyboard 4000] on usb-0000:00:1d.1-2
[ 7.357797] input: Microsoft Natural� Ergonomic Keyboard 4000 as
/class/input/input3
[ 7.377135] input,hidraw1: USB HID v1.11 Device [Microsoft Natural�
Ergonomic Keyboard 4000] on usb-0000:00:1d.1-2
[ 7.379225] input: Logitech USB Receiver as /class/input/input4
[ 7.389695] input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on
usb-0000:00:1d.7-2.1.2
[ 7.392358] input: Logitech USB Receiver as /class/input/input5
[ 7.405550] input,hiddev96,hidraw3: USB HID v1.11 Device [Logitech USB
Receiver] on usb-0000:00:1d.7-2.1.2
[ 7.405756] usbcore: registered new interface driver usbhid
[ 7.405786] usbhid: v2.6:USB HID core driver
[ 7.498246] PM: Starting manual resume from disk
[ 7.579877] kjournald starting. Commit interval 5 seconds
[ 7.579877] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.710819] udevd version 125 started
[ 9.466148] end_request: I/O error, dev sr0, sector 13734860
[ 9.466187] Buffer I/O error on device sr0, logical block 3433715
[ 9.469052] input: Power Button (FF) as /class/input/input6
[ 9.489900] end_request: I/O error, dev sr0, sector 13734860
[ 9.489900] Buffer I/O error on device sr0, logical block 3433715
[ 9.522180] ACPI: Power Button (FF) [PWRF]
[ 9.524341] input: Power Button (CM) as /class/input/input7
[ 9.582130] ACPI: Power Button (CM) [PWRB]
[ 10.193983] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid
0x04F9 pid 0x0027
[ 10.194050] usbcore: registered new interface driver usblp
[ 10.203979] input: PC Speaker as /class/input/input8
[ 10.231979] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) ->
IRQ 19
[ 10.247979] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 10.261371] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2,
TCOBASE=0x0460)
[ 10.261450] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.303291] gameport: EMU10K1 is pci0000:02:05.1/gameport0, io 0xde00, speed
1018kHz
[ 10.325431] input: Wacom Bamboo as /class/input/input9
[ 10.379581] usbcore: registered new interface driver wacom
[ 10.379617] wacom: v1.48:USB Wacom Graphire and Wacom Intuos tablet driver
[ 10.441916] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) ->
IRQ 22
[ 10.441916] PCI: Setting latency timer of device 0000:02:05.0 to 64
[ 10.446950] Installing spdif_bug patch: Audigy 2 ZS [SB0350]
[ 10.624614] ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 17 (level, low) ->
IRQ 17
[ 10.624614] PCI: Setting latency timer of device 0000:01:00.1 to 64
[ 12.338657] Adding 3911788k swap on /dev/sda6. Priority:-1 extents:1
across:3911788k
[ 12.378561] usb-storage: device scan complete
[ 12.382981] scsi 4:0:0:0: Direct-Access Generic Flash HS-CF 4.44
PQ: 0 ANSI: 0
[ 12.387258] scsi 4:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44
PQ: 0 ANSI: 0
[ 12.391540] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 12.391540] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 12.441451] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 12.441451] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 12.835784] EXT3 FS on sda5, internal journal
[ 13.418485] loop: module loaded
[ 13.478506] tun: Universal TUN/TAP device driver, 1.6
[ 13.478506] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
[ 13.514485] w83627ehf: Found W83627EHG chip at 0x290
[ 13.533890] coretemp coretemp.0: Using relative temperature scale!
[ 13.533890] coretemp coretemp.1: Using relative temperature scale!
[ 13.581264] device-mapper: uevent: version 1.0.3
[ 13.584022] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised:
dm-de...@redhat.com
[ 14.330362] kjournald starting. Commit interval 5 seconds
[ 14.330362] EXT3 FS on sda7, internal journal
[ 14.330362] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.429874] kjournald starting. Commit interval 5 seconds
[ 14.429874] EXT3 FS on sda8, internal journal
[ 14.429874] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.499241] NTFS driver 2.1.29 [Flags: R/W MODULE].
[ 14.584676] NTFS volume version 3.1.
[ 14.654464] NTFS volume version 3.1.
[ 15.472223] Bridge firewalling registered
[ 15.472223] br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 15.478701] device eth0 entered promiscuous mode
[ 15.478701] r8169: eth0: link up
[ 15.482632] br0: port 1(eth0) entering learning state
[ 25.275906] br0: topology change detected, propagating
[ 25.275942] br0: port 1(eth0) entering forwarding state
[ 28.460119] NET: Registered protocol family 10
[ 28.460119] lo: Disabled Privacy Extensions
[ 32.219982] pnp: the driver 'parport_pc' has been registered
[ 32.219982] lp: driver loaded but no devices found
[ 32.271893] ppdev: user-space parallel port driver
[ 35.787257] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 37.634022] input: btnx keyboard as /class/input/input10
[ 37.668714] input: btnx mouse as /class/input/input11
[ 38.988001] eth0: no IPv6 routers present
[ 39.452763] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies,
Starnberg, GERMANY' taints kernel.
[ 39.486531] [fglrx] Maximum main memory to use for locked dma buffers: 5789
MBytes.
[ 39.486531] [fglrx] vendor: 1002 device: 9490 count: 1
[ 39.486531] [fglrx] ioport: bar 4, base 0xce00, size: 0x100
[ 39.486531] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 39.486531] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 39.486531] [fglrx] Driver built-in PAT support is enabled successfully
[ 39.486531] [fglrx] module loaded - fglrx 8.56.4 [Dec 1 2008] with 1 minors
[ 39.574108] br0: no IPv6 routers present
[ 40.799719] [fglrx] Gart USWC size:192 M.
[ 40.799726] [fglrx] Gart cacheable size:60 M.
[ 40.799731] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 40.799734] [fglrx] Reserved FB block: Unshared offset:ff76000, size:8a000
[ 40.799737] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
** Loaded modules:
Module Size Used by
fglrx 2231064 43
uinput 12032 2
ppdev 11656 0
parport_pc 31016 0
lp 14724 0
parport 41776 3 ppdev,parport_pc,lp
autofs4 24200 1
ipv6 288328 30
bridge 53544 0
nls_utf8 6272 2
ntfs 188416 2
nls_base 12932 2 nls_utf8,ntfs
dm_snapshot 19400 0
dm_mirror 20608 0
dm_log 13956 1 dm_mirror
dm_mod 58864 3 dm_snapshot,dm_mirror,dm_log
coretemp 11008 0
w83627ehf 26512 0
hwmon_vid 7296 1 w83627ehf
tun 14084 0
kvm_intel 39776 0
kvm 127464 1 kvm_intel
loop 19468 0
snd_emu10k1_synth 10752 0
snd_hda_intel 434904 0
snd_emux_synth 36864 1 snd_emu10k1_synth
snd_seq_virmidi 10112 1 snd_emux_synth
snd_seq_midi_emul 10496 1 snd_emux_synth
snd_seq_dummy 7428 0
snd_emu10k1 141536 1 snd_emu10k1_synth
snd_seq_oss 33152 0
firmware_class 12544 1 snd_emu10k1
snd_seq_midi 11072 0
snd_ac97_codec 115416 1 snd_emu10k1
snd_rawmidi 26784 3 snd_seq_virmidi,snd_emu10k1,snd_seq_midi
ac97_bus 6272 1 snd_ac97_codec
snd_pcm_oss 41760 0
snd_mixer_oss 18816 1 snd_pcm_oss
snd_seq_midi_event 11904 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi
snd_pcm 81672 4
snd_hda_intel,snd_emu10k1,snd_ac97_codec,snd_pcm_oss
snd_seq 54304 9
snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
wacom 22144 0
snd_util_mem 8960 2 snd_emux_synth,snd_emu10k1
emu10k1_gp 7552 0
gameport 17040 2 emu10k1_gp
snd_timer 25744 3 snd_emu10k1,snd_pcm,snd_seq
snd_seq_device 11668 8
snd_emu10k1_synth,snd_emux_synth,snd_seq_dummy,snd_emu10k1,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd_hwdep 12040 2 snd_emux_synth,snd_emu10k1
iTCO_wdt 15696 0
i2c_i801 13596 0
pcspkr 7040 0
usblp 16896 0
i2c_core 27936 1 i2c_i801
snd 63688 14
snd_hda_intel,snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_seq_oss,snd_ac97_codec,snd_rawmidi,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq,snd_timer,snd_seq_device,snd_hwdep
intel_agp 31728 0
soundcore 12064 1 snd
snd_page_alloc 13072 3 snd_hda_intel,snd_emu10k1,snd_pcm
button 11680 0
joydev 14848 0
evdev 14208 10
ext3 125072 3
jbd 51240 1 ext3
mbcache 12804 1 ext3
usb_storage 94528 0
usbhid 45792 0
hid 41792 1 usbhid
ff_memless 9224 1 usbhid
sg 36448 0
sr_mod 19652 0
cdrom 37928 1 sr_mod
sd_mod 29376 7
ata_generic 10116 0
ata_piix 22660 6
libata 165472 2 ata_generic,ata_piix
scsi_mod 160760 5 usb_storage,sg,sr_mod,sd_mod,libata
dock 14112 1 libata
floppy 61672 0
ohci1394 32564 0
ieee1394 93816 1 ohci1394
ide_pci_generic 9220 0 [permanent]
r8169 31492 0
ide_core 128284 1 ide_pci_generic
uhci_hcd 25760 0
ehci_hcd 36108 0
thermal 22688 0
processor 42304 1 thermal
fan 9352 0
thermal_sys 17728 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82P965/G965 Memory Controller Hub
[8086:29a0] (rev 02)
Subsystem: ABIT Computer Corp. Device [147b:1080]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation 82P965/G965 PCI Express Root Port
[8086:29a1] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fdd00000-fddfffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1080]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ff00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #5 [8086:2835] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1080]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at fe00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI])
Subsystem: ABIT Computer Corp. Device [147b:1080]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1080]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at fd00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1080]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at fc00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #3 [8086:2832] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1080]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at fb00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI])
Subsystem: ABIT Computer Corp. Device [147b:1080]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fdffe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
f2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fdc00000-fdcfffff
Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface
Controller [8086:2810] (rev 02)
Subsystem: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface
Controller [8086:2810]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 4 port
SATA IDE Controller [8086:2820] (rev 02) (prog-if 8f [Master SecP SecO PriP
PriO])
Subsystem: ABIT Computer Corp. Device [147b:1080]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at fa00 [size=8]
Region 1: I/O ports at f900 [size=4]
Region 2: I/O ports at f800 [size=8]
Region 3: I/O ports at f700 [size=4]
Region 4: I/O ports at f600 [size=16]
Region 5: I/O ports at f500 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ide-pci-generic, ata_piix, ata_generic
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller
[8086:283e] (rev 02)
Subsystem: ABIT Computer Corp. Device [147b:1080]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fdffd000 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 2 port
SATA IDE Controller [8086:2825] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: ABIT Computer Corp. Device [147b:1080]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at f300 [size=8]
Region 1: I/O ports at f200 [size=4]
Region 2: I/O ports at f100 [size=8]
Region 3: I/O ports at f000 [size=4]
Region 4: I/O ports at ef00 [size=16]
Region 5: I/O ports at ee00 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ide-pci-generic, ata_piix, ata_generic
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV730XT [Radeon
HD 4670] [1002:9490] (prog-if 00 [VGA controller])
Subsystem: Hightech Information System Ltd. Device [1787:2268]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fdde0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at ce00 [size=256]
[virtual] Expansion ROM at fdd00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
Kernel modules: fglrx
01:00.1 Audio device [0403]: ATI Technologies Inc Device [1002:aa38]
Subsystem: Hightech Information System Ltd. Device [1787:aa38]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fddfc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
02:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8110SC/8169SC Gigabit Ethernet [10ec:8167] (rev 10)
Subsystem: ABIT Computer Corp. Device [147b:1080]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at dc00 [size=256]
Region 1: Memory at fdcff000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at fde00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
02:05.0 Multimedia audio controller [0401]: Creative Labs SB Audigy [1102:0004]
(rev 04)
Subsystem: Creative Labs SB Audigy 2 ZS (SB0350) [1102:2002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at df00 [size=64]
Capabilities: <access denied>
Kernel driver in use: EMU10K1_Audigy
Kernel modules: snd-emu10k1
02:05.1 Input device controller [0980]: Creative Labs SB Audigy Game Port
[1102:7003] (rev 04)
Subsystem: Creative Labs SB Audigy MIDI/Game Port [1102:0040]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: I/O ports at de00 [size=8]
Capabilities: <access denied>
Kernel driver in use: Emu10k1_gameport
Kernel modules: emu10k1-gp
02:05.2 FireWire (IEEE 1394) [0c00]: Creative Labs SB Audigy FireWire Port
[1102:4001] (rev 04) (prog-if 10 [OHCI])
Subsystem: Creative Labs SB Audigy FireWire Port [1102:0010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 23
Region 0: Memory at fdcfe000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at fdcf8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394
-- System Information:
Debian Release: 5.0
APT prefers stable
APT policy: (990, 'stable'), (800, 'testing'), (700, 'unstable'), (600,
'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_GB.utf8, LC_CTYPE=en_GB.utf8 (charmap=UTF-8) (ignored: LC_ALL
set to en_GB.utf8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.26-1-amd64 recommends no packages.
Versions of packages linux-image-2.6.26-1-amd64 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-amd64/postinst/create-kimage-link-2.6.26-1-amd64: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-amd64/postinst/old-initrd-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/bootloader-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/initrd-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/old-system-map-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/depmod-error-initrd-2.6.26-1-amd64: false
linux-image-2.6.26-1-amd64/preinst/overwriting-modules-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/elilo-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/bootloader-error-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/abort-install-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/lilo-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/depmod-error-2.6.26-1-amd64: false
linux-image-2.6.26-1-amd64/prerm/removing-running-kernel-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-amd64:
true
linux-image-2.6.26-1-amd64/postinst/bootloader-test-error-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/abort-overwrite-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/old-dir-initrd-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-amd64/preinst/failed-to-move-modules-2.6.26-1-amd64:
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
