Package: linux-image-2.6.29-1-amd64
Version: 2.6.29-3
Followup-For: Bug #503766
With 2.6.29 the display is turned off when the intelfb module is loaded.
Unable to frob numlock led on keyboard, no ping.
-- Package-specific info:
** Version:
Linux version 2.6.29-1-amd64 (Debian 2.6.29-3) (m...@debian.org) (gcc version
4.3.3 (Debian 4.3.3-5) ) #1 SMP Fri Apr 17 10:12:36 UTC 2009
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.29-1-amd64
root=UUID=ae7d5095-c8b3-4205-af0e-032b0e124ec3 ro
** Not tainted
** Kernel log:
[ 2.338525] ata1.00: ATA-7: Maxtor 6L200M0, BACE1G10, max UDMA/133
[ 2.338569] ata1.00: 398297088 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.353270] ata1.00: configured for UDMA/133
[ 2.353355] isa bounce pool size: 16 pages
[ 2.353484] scsi 0:0:0:0: Direct-Access ATA Maxtor 6L200M0 BACE
PQ: 0 ANSI: 5
[ 2.522801] piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x01)
[ 2.522857] PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.522919] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[ 2.522962] ide0: BM-DMA at 0xffa0-0xffa7
[ 2.523004] ide1: BM-DMA at 0xffa8-0xffaf
[ 2.523043] Probing IDE interface ide0...
[ 2.617306] firewire_core: created device fw0: GUID 0011d80000e22f81, S400
[ 2.633183] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 2.803479] usb 4-2: New USB device found, idVendor=056a, idProduct=0065
[ 2.803525] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.803566] usb 4-2: Product: MTE-450
[ 2.803601] usb 4-2: Manufacturer: Wacom Co.,Ltd.
[ 2.803725] usb 4-2: configuration #1 chosen from 1 choice
[ 3.018803] Driver 'sd' needs updating - please use bus_type methods
[ 3.018970] sd 0:0:0:0: [sda] 398297088 512-byte hardware sectors: (203
GB/189 GiB)
[ 3.019036] sd 0:0:0:0: [sda] Write Protect is off
[ 3.019073] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.019103] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.019238] sd 0:0:0:0: [sda] 398297088 512-byte hardware sectors: (203
GB/189 GiB)
[ 3.019304] sd 0:0:0:0: [sda] Write Protect is off
[ 3.019340] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.019372] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.019424] sda: sda1 sda2 < sda5 sda6 sda7 sda8<6>usbcore: registered new
interface driver hiddev
[ 3.087337] usbcore: registered new interface driver usbhid
[ 3.087376] usbhid: v2.6:USB HID core driver
[ 3.090944] sda9 > sda3
[ 3.091495] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.256225] hda: Optiarc DVD RW AD-7173A, ATAPI CD/DVD-ROM drive
[ 3.928090] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 3.928248] hda: UDMA/66 mode selected
[ 3.928391] Probing IDE interface ide1...
[ 4.496094] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.498711] ide1 at 0x170-0x177,0x376 on irq 15
[ 4.526604] ide-cd driver 5.00
[ 4.529033] ide-cd: hda: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB
Cache
[ 4.529213] Uniform CD-ROM driver Revision: 3.20
[ 4.609362] PM: Starting manual resume from disk
[ 4.663442] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 4.663487] EXT3-fs: write access will be enabled during recovery.
[ 5.253041] kjournald starting. Commit interval 5 seconds
[ 5.253100] EXT3-fs: recovery complete.
[ 5.259133] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.835040] udevd version 125 started
[ 8.715636] input: Power Button (FF) as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 8.715703] ACPI: Power Button (FF) [PWRF]
[ 8.715814] input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 8.715868] ACPI: Power Button (CM) [PWRB]
[ 9.189060] parport_pc 00:06: reported by Plug and Play ACPI
[ 9.189211] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 9.570151] agpgart-intel 0000:00:00.0: Intel 945G Chipset
[ 9.570491] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 9.572685] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 9.883652] input: Wacom Bamboo as
/devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.0/input/input4
[ 9.897552] usbcore: registered new interface driver wacom
[ 9.897596] wacom: v1.49:USB Wacom Graphire and Wacom Intuos tablet driver
[ 10.100183] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 10.100375] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2,
TCOBASE=0x0860)
[ 10.100477] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.206706] intel_rng: FWH not detected
[ 10.664526] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 11.141066] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 19 (level, low) -> IRQ
19
[ 11.141222] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 14.023078] Adding 4883720k swap on /dev/sda6. Priority:-1 extents:1
across:4883720k
[ 14.031349] EXT3-fs warning: maximal mount count reached, running e2fsck is
recommended
[ 14.031581] EXT3 FS on sda7, internal journal
[ 15.062635] loop: module loaded
[ 15.187372] w83627ehf: Found W83627DHG chip at 0x290
[ 15.187439] ACPI: I/O resource w83627ehf [0x295-0x296] conflicts with ACPI
region HWRE [0x290-0x299]
[ 15.187489] ACPI: Device needs an ACPI driver
[ 15.210876] coretemp coretemp.0: Using relative temperature scale!
[ 16.541999] fuse init (API version 7.11)
[ 16.975685] ReiserFS: sda5: found reiserfs format "3.6" with standard journal
[ 16.975755] ReiserFS: sda5: using ordered data mode
[ 16.981858] ReiserFS: sda5: journal params: device sda5, size 8192, journal
first block 18, max trans len 1024, max batch 900, max commit age 30, max trans
age 30
[ 16.983380] ReiserFS: sda5: checking transaction log (sda5)
[ 16.989564] ReiserFS: sda5: replayed 1 transactions in 0 seconds
[ 17.039547] ReiserFS: sda5: Using r5 hash to sort names
[ 17.088354] kjournald starting. Commit interval 5 seconds
[ 17.088548] EXT3 FS on sda8, internal journal
[ 17.088623] EXT3-fs: mounted filesystem with ordered data mode.
[ 17.134414] kjournald starting. Commit interval 5 seconds
[ 17.134629] EXT3 FS on sda3, internal journal
[ 17.134702] EXT3-fs: mounted filesystem with ordered data mode.
[ 17.180997] kjournald starting. Commit interval 5 seconds
[ 17.181196] EXT3 FS on sda9, internal journal
[ 17.181270] EXT3-fs: mounted filesystem with ordered data mode.
[ 18.011600] alloc irq_desc for 26 on cpu 0 node 0
[ 18.011605] alloc kstat_irqs on cpu 0 node 0
[ 18.011619] atl1 0000:02:00.0: irq 26 for MSI/MSI-X
[ 18.011727] atl1 0000:02:00.0: eth0 link is up 100 Mbps full duplex
[ 22.753111] NET: Registered protocol family 10
[ 22.753681] lo: Disabled Privacy Extensions
[ 26.982971] lp0: using parport0 (interrupt-driven).
[ 27.001602] ppdev: user-space parallel port driver
[ 33.212022] eth0: no IPv6 routers present
** Loaded modules:
Module Size Used by
binfmt_misc 9356 1
ppdev 7528 0
lp 10324 0
ipv6 284448 24
reiserfs 202080 1
fuse 55440 1
coretemp 6656 0
w83627ehf 22032 0
hwmon_vid 3056 1 w83627ehf
loop 15324 0
firewire_sbp2 15120 0
joydev 10944 0
snd_hda_codec_realtek 243380 1
snd_hda_intel 26488 0
snd_hda_codec 69648 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 7864 1 snd_hda_codec
snd_pcm_oss 36448 0
snd_mixer_oss 14576 1 snd_pcm_oss
snd_pcm 78776 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
psmouse 41564 0
evdev 10496 6
serio_raw 5780 0
i2c_i801 9840 0
i2c_core 25200 1 i2c_i801
snd_seq_dummy 3108 0
rng_core 4744 0
iTCO_wdt 12400 0
snd_seq_oss 29248 0
snd_seq_midi 6672 0
snd_rawmidi 22896 1 snd_seq_midi
wacom 20616 0
snd_seq_midi_event 7504 2 snd_seq_oss,snd_seq_midi
snd_seq 50928 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 22288 2 snd_pcm,snd_seq
snd_seq_device 7428 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 63240 12
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 7984 1 snd
snd_page_alloc 9840 2 snd_hda_intel,snd_pcm
intel_agp 28240 1
parport_pc 26744 1
parport 37936 3 ppdev,lp,parport_pc
button 7280 0
ext3 122880 4
jbd 50472 1 ext3
mbcache 9140 1 ext3
ide_cd_mod 30224 0
cdrom 33592 1 ide_cd_mod
usbhid 34272 0
hid 40992 1 usbhid
sd_mod 32712 7
crc_t10dif 2064 1 sd_mod
piix 7144 0
ide_pci_generic 4628 0
ide_core 109108 3 ide_cd_mod,piix,ide_pci_generic
ata_piix 24228 7
ata_generic 5876 0
firewire_ohci 22036 0
firewire_core 39924 2 firewire_sbp2,firewire_ohci
crc_itu_t 2288 1 firewire_core
libata 172972 2 ata_piix,ata_generic
scsi_mod 159120 3 firewire_sbp2,sd_mod,libata
ehci_hcd 34156 0
uhci_hcd 22464 0
atl1 30824 0
mii 5568 1 atl1
thermal 18896 0
processor 45464 1 thermal
fan 5304 0
thermal_sys 13104 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller
Hub [8086:2770] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:817a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ
Integrated Graphics Controller [8086:2772] (rev 02) (prog-if 00 [VGA
controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:817a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at cfd00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 8800 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at cfd80000 (32-bit, non-prefetchable) [size=256K]
Capabilities: <access denied>
Kernel modules: intelfb
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:8249]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at cfdf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: cff00000-cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 9000 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 9400 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 9800 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at a000 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at cfdffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: cfe00000-cfefffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC
Interface Bridge [8086:27b8] (rev 01)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-rng, iTCO_wdt
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: ata_generic, ide-pci-generic, piix
00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family)
SATA IDE Controller [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP
PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:2601]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at b800 [size=8]
Region 1: I/O ports at b400 [size=4]
Region 2: I/O ports at b000 [size=8]
Region 3: I/O ports at a800 [size=4]
Region 4: I/O ports at a400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_generic, ata_piix, ide-pci-generic
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller
[8086:27da] (rev 01)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
01:03.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306 Fire II IEEE
1394 OHCI Link Layer Controller [1106:3044] (rev c0) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max), Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at cfeff800 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at c800 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
02:00.0 Ethernet controller [0200]: Attansic Technology Corp. L1 Gigabit
Ethernet Adapter [1969:1048] (rev b0)
Subsystem: ASUSTeK Computer Inc. Device [1043:8226]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 26
Region 0: Memory at cffc0000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at cffa0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: atl1
Kernel modules: atl1
-- System Information:
Debian Release: 5.0.1
APT prefers stable
APT policy: (900, 'stable'), (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.29-1-amd64 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.29-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.29-1-amd64 recommends no packages.
Versions of packages linux-image-2.6.29-1-amd64 suggests:
ii grub-pc [grub] 1.96+20080724-16 GRand Unified Bootloader, version
pn linux-doc-2.6.29 <none> (no description available)
-- debconf-show failed
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
