Package: qemubuilder Version: 0.55 Severity: normal Hi!
Sorry to bother you again but qemubuilder is just to usefull
to ignore ;)
I finally managed to find an armel kernel[0] that boots fine
here. However, the created qemu environment ends up with non-working
network making it impossible to use. --login works fine however but I
don't know off-hand how to try setting network there so I haven't done
that right now.
Regards
Christoph
[0] http://people.debian.org/~aurel32/qemu/armel/
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'stable'), (400, 'unstable'), (100,
'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.29-1-686 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages qemubuilder depends on:
ii debootstrap 1.0.10lenny1 Bootstrap a basic Debian system
ii libc6 2.9-4 GNU C Library: Shared libraries
ii pbuilder 0.187 personal package builder for Debia
ii qemu 0.10.3-1 fast processor emulator
qemubuilder recommends no packages.
qemubuilder suggests no packages.
-- no debconf information
--
/"\ ASCII Ribbon : GPG-Key ID: 0x0372275D
\ / Campaign :
X against HTML : Debian NM
/ \ in eMails : http://www.debian.org/
http://www.christoph-egger.org/
$ sudo LANG="C" qemubuilder --create --configfile /home/christoph/.pbuilderrc-arm forking: mke2fs -q -F -j -m1 -O sparse_super /media/extern/freeart/qemubuilder-arm/base forking: tune2fs -c 0 -i 0 /media/extern/freeart/qemubuilder-arm/base tune2fs 1.41.3 (12-Oct-2008) Setting maximal mount count to -1 Setting interval between checks to 0 seconds forking: mount -o loop /media/extern/freeart/qemubuilder-arm/base /var/cache/pbuilder/build//qemu.30361 -> Invoking debootstrap forking: debootstrap --arch armel --foreign sid /var/cache/pbuilder/build//qemu.30361 ftp://ftp.de.debian.org/debian I: Retrieving Release I: Retrieving Packages I: Validating Packages I: Resolving dependencies of required packages... I: Resolving dependencies of base packages... I: Found additional required dependencies: libdb4.7 I: Checking component main on ftp://ftp.de.debian.org/debian... I: Retrieving adduser I: Validating adduser I: Retrieving apt I: Validating apt I: Retrieving apt-utils I: Validating apt-utils I: Retrieving aptitude I: Validating aptitude I: Retrieving base-files I: Validating base-files I: Retrieving base-passwd I: Validating base-passwd I: Retrieving bash I: Validating bash I: Retrieving bsdmainutils I: Validating bsdmainutils I: Retrieving bsdutils I: Validating bsdutils I: Retrieving coreutils I: Validating coreutils I: Retrieving cpio I: Validating cpio I: Retrieving cron I: Validating cron I: Retrieving debconf I: Validating debconf I: Retrieving debconf-i18n I: Validating debconf-i18n I: Retrieving debian-archive-keyring I: Validating debian-archive-keyring I: Retrieving debianutils I: Validating debianutils I: Retrieving dhcp3-client I: Validating dhcp3-client I: Retrieving dhcp3-common I: Validating dhcp3-common I: Retrieving diff I: Validating diff I: Retrieving dpkg I: Validating dpkg I: Retrieving e2fslibs I: Validating e2fslibs I: Retrieving e2fsprogs I: Validating e2fsprogs I: Retrieving ed I: Validating ed I: Retrieving findutils I: Validating findutils I: Retrieving gcc-4.2-base I: Validating gcc-4.2-base I: Retrieving gcc-4.3-base I: Validating gcc-4.3-base I: Retrieving gnupg I: Validating gnupg I: Retrieving gpgv I: Validating gpgv I: Retrieving grep I: Validating grep I: Retrieving groff-base I: Validating groff-base I: Retrieving gzip I: Validating gzip I: Retrieving hostname I: Validating hostname I: Retrieving ifupdown I: Validating ifupdown I: Retrieving info I: Validating info I: Retrieving initscripts I: Validating initscripts I: Retrieving iproute I: Validating iproute I: Retrieving iptables I: Validating iptables I: Retrieving iputils-ping I: Validating iputils-ping I: Retrieving libacl1 I: Validating libacl1 I: Retrieving libattr1 I: Validating libattr1 I: Retrieving libblkid1 I: Validating libblkid1 I: Retrieving libbz2-1.0 I: Validating libbz2-1.0 I: Retrieving libc6 I: Validating libc6 I: Retrieving libcomerr2 I: Validating libcomerr2 I: Retrieving libconsole I: Validating libconsole I: Retrieving libcwidget3 I: Validating libcwidget3 I: Retrieving libdb4.6 I: Validating libdb4.6 I: Retrieving libdb4.7 I: Validating libdb4.7 I: Retrieving libdevmapper1.02.1 I: Validating libdevmapper1.02.1 I: Retrieving libept0 I: Validating libept0 I: Retrieving libgcc1 I: Validating libgcc1 I: Retrieving libgcrypt11 I: Validating libgcrypt11 I: Retrieving libgdbm3 I: Validating libgdbm3 I: Retrieving libgnutls26 I: Validating libgnutls26 I: Retrieving libgpg-error0 I: Validating libgpg-error0 I: Retrieving liblocale-gettext-perl I: Validating liblocale-gettext-perl I: Retrieving libncurses5 I: Validating libncurses5 I: Retrieving libncursesw5 I: Validating libncursesw5 I: Retrieving libnewt0.52 I: Validating libnewt0.52 I: Retrieving libpam-modules I: Validating libpam-modules I: Retrieving libpam-runtime I: Validating libpam-runtime I: Retrieving libpam0g I: Validating libpam0g I: Retrieving libpopt0 I: Validating libpopt0 I: Retrieving libreadline5 I: Validating libreadline5 I: Retrieving libsasl2-2 I: Validating libsasl2-2 I: Retrieving libselinux1 I: Validating libselinux1 I: Retrieving libsepol1 I: Validating libsepol1 I: Retrieving libsigc++-2.0-0c2a I: Validating libsigc++-2.0-0c2a I: Retrieving libslang2 I: Validating libslang2 I: Retrieving libss2 I: Validating libss2 I: Retrieving libssl0.9.8 I: Validating libssl0.9.8 I: Retrieving libstdc++6 I: Validating libstdc++6 I: Retrieving libtasn1-3 I: Validating libtasn1-3 I: Retrieving libtext-charwidth-perl I: Validating libtext-charwidth-perl I: Retrieving libtext-iconv-perl I: Validating libtext-iconv-perl I: Retrieving libtext-wrapi18n-perl I: Validating libtext-wrapi18n-perl I: Retrieving libusb-0.1-4 I: Validating libusb-0.1-4 I: Retrieving libusb-1.0-0 I: Validating libusb-1.0-0 I: Retrieving libuuid1 I: Validating libuuid1 I: Retrieving libvolume-id1 I: Validating libvolume-id1 I: Retrieving libwrap0 I: Validating libwrap0 I: Retrieving libxapian15 I: Validating libxapian15 I: Retrieving login I: Validating login I: Retrieving logrotate I: Validating logrotate I: Retrieving lsb-base I: Validating lsb-base I: Retrieving lzma I: Validating lzma I: Retrieving makedev I: Validating makedev I: Retrieving man-db I: Validating man-db I: Retrieving manpages I: Validating manpages I: Retrieving mawk I: Validating mawk I: Retrieving mktemp I: Validating mktemp I: Retrieving module-init-tools I: Validating module-init-tools I: Retrieving mount I: Validating mount I: Retrieving nano I: Validating nano I: Retrieving ncurses-base I: Validating ncurses-base I: Retrieving ncurses-bin I: Validating ncurses-bin I: Retrieving net-tools I: Validating net-tools I: Retrieving netbase I: Validating netbase I: Retrieving netcat-traditional I: Validating netcat-traditional I: Retrieving passwd I: Validating passwd I: Retrieving perl-base I: Validating perl-base I: Retrieving procps I: Validating procps I: Retrieving readline-common I: Validating readline-common I: Retrieving rsyslog I: Validating rsyslog I: Retrieving sed I: Validating sed I: Retrieving sensible-utils I: Validating sensible-utils I: Retrieving sysv-rc I: Validating sysv-rc I: Retrieving sysvinit I: Validating sysvinit I: Retrieving sysvinit-utils I: Validating sysvinit-utils I: Retrieving tar I: Validating tar I: Retrieving tasksel I: Validating tasksel I: Retrieving tasksel-data I: Validating tasksel-data I: Retrieving tcpd I: Validating tcpd I: Retrieving traceroute I: Validating traceroute I: Retrieving tzdata I: Validating tzdata I: Retrieving udev I: Validating udev I: Retrieving util-linux I: Validating util-linux I: Retrieving vim-common I: Validating vim-common I: Retrieving vim-tiny I: Validating vim-tiny I: Retrieving wget I: Validating wget I: Retrieving whiptail I: Validating whiptail I: Retrieving zlib1g I: Validating zlib1g I: Extracting base-files... I: Extracting base-passwd... I: Extracting bash... I: Extracting bsdutils... I: Extracting coreutils... I: Extracting debconf... I: Extracting debconf-i18n... I: Extracting debianutils... I: Extracting diff... I: Extracting dpkg... I: Extracting e2fslibs... I: Extracting e2fsprogs... I: Extracting findutils... I: Extracting gcc-4.2-base... I: Extracting gcc-4.3-base... I: Extracting grep... I: Extracting gzip... I: Extracting hostname... I: Extracting initscripts... I: Extracting libacl1... I: Extracting libattr1... I: Extracting libblkid1... I: Extracting libc6... I: Extracting libcomerr2... I: Extracting libdb4.6... I: Extracting libdb4.7... I: Extracting libdevmapper1.02.1... I: Extracting libgcc1... I: Extracting liblocale-gettext-perl... I: Extracting libncurses5... I: Extracting libpam-modules... I: Extracting libpam-runtime... I: Extracting libpam0g... I: Extracting libselinux1... I: Extracting libsepol1... I: Extracting libslang2... I: Extracting libss2... I: Extracting libstdc++6... I: Extracting libtext-charwidth-perl... I: Extracting libtext-iconv-perl... I: Extracting libtext-wrapi18n-perl... I: Extracting libuuid1... I: Extracting libvolume-id1... I: Extracting login... I: Extracting lsb-base... I: Extracting lzma... I: Extracting makedev... I: Extracting mawk... I: Extracting mktemp... I: Extracting mount... I: Extracting ncurses-base... I: Extracting ncurses-bin... I: Extracting passwd... I: Extracting perl-base... I: Extracting procps... I: Extracting sed... I: Extracting sensible-utils... I: Extracting sysv-rc... I: Extracting sysvinit... I: Extracting sysvinit-utils... I: Extracting tar... I: Extracting tzdata... I: Extracting util-linux... I: Extracting zlib1g... -> Doing arch-specific /dev population mkdir chroot-/dev: File exists forking: umount /var/cache/pbuilder/build//qemu.30361 forking: mke2fs -q -F -j -m1 -O sparse_super /var/cache/pbuilder/build//qemu.30361.dev forking: tune2fs -c 0 -i 0 /var/cache/pbuilder/build//qemu.30361.dev tune2fs 1.41.3 (12-Oct-2008) Setting maximal mount count to -1 Setting interval between checks to 0 seconds forking: mount -o loop /var/cache/pbuilder/build//qemu.30361.dev /var/cache/pbuilder/build//qemu.30361 forking: umount /var/cache/pbuilder/build//qemu.30361.dev forking qemu: qemu-system-arm -nographic -M versatilepb -m 194 -kernel /media/extern/freeart/qemubuilder-arm/vmlinuz-2.6.26-1-versatile -initrd /media/extern/freeart/qemubuilder-arm/initrd.img-2.6.26-1-versatile -hda /media/extern/freeart/qemubuilder-arm/base -hdb /var/cache/pbuilder/build//qemu.30361.dev -append root=/dev/sda quiet init=/pbuilder-run console=ttyAMA0 -serial stdio Uncompressing Linux...................................................................................... done, booting the kernel. [ 0.000000] CLCD: unknown LCD panel ID 0x00001000, using VGA Loading, please wait... -> qemu-pbuilder first-stage mount: proc already mounted -> qemu-pbuilder second-stage -> setting time to Mon May 4 16:54:07 2009 Mon May 4 16:54:07 UTC 2009 -> Running debootstrap second-stage script I: Installing core packages... I: Unpacking required packages... I: Unpacking base-files... I: Unpacking base-passwd... I: Unpacking bash... I: Unpacking bsdutils... I: Unpacking coreutils... I: Unpacking debconf... I: Unpacking debconf-i18n... I: Unpacking debianutils... I: Unpacking diff... I: Unpacking dpkg... I: Unpacking e2fslibs... I: Unpacking e2fsprogs... I: Unpacking findutils... I: Unpacking gcc-4.2-base... I: Unpacking gcc-4.3-base... I: Unpacking grep... I: Unpacking gzip... I: Unpacking hostname... I: Unpacking initscripts... I: Unpacking libacl1... I: Unpacking libattr1... I: Unpacking libblkid1... I: Unpacking libc6... I: Unpacking libcomerr2... I: Unpacking libdb4.6... I: Unpacking libdb4.7... I: Unpacking libdevmapper1.02.1... I: Unpacking libgcc1... I: Unpacking liblocale-gettext-perl... I: Unpacking libncurses5... I: Unpacking libpam-modules... I: Unpacking libpam-runtime... I: Unpacking libpam0g... I: Unpacking libselinux1... I: Unpacking libsepol1... I: Unpacking libslang2... I: Unpacking libss2... I: Unpacking libstdc++6... I: Unpacking libtext-charwidth-perl... I: Unpacking libtext-iconv-perl... I: Unpacking libtext-wrapi18n-perl... I: Unpacking libuuid1... I: Unpacking libvolume-id1... I: Unpacking login... I: Unpacking lsb-base... I: Unpacking lzma... I: Unpacking makedev... I: Unpacking mawk... I: Unpacking mktemp... I: Unpacking mount... I: Unpacking ncurses-base... I: Unpacking ncurses-bin... I: Unpacking passwd... I: Unpacking perl-base... I: Unpacking procps... I: Unpacking sed... I: Unpacking sensible-utils... I: Unpacking sysv-rc... I: Unpacking sysvinit... I: Unpacking sysvinit-utils... I: Unpacking tar... I: Unpacking tzdata... I: Unpacking util-linux... I: Unpacking zlib1g... I: Configuring required packages... I: Configuring sensible-utils... I: Configuring sysv-rc... I: Configuring gcc-4.2-base... I: Configuring gcc-4.3-base... I: Configuring libc6... I: Configuring mktemp... I: Configuring debianutils... I: Configuring bsdutils... I: Configuring libsepol1... I: Configuring libgcc1... I: Configuring libncurses5... I: Configuring libattr1... I: Configuring sed... I: Configuring base-passwd... I: Configuring libcomerr2... I: Configuring mawk... I: Configuring libdb4.6... I: Configuring libdb4.7... I: Configuring grep... I: Configuring hostname... I: Configuring libacl1... I: Configuring libslang2... I: Configuring libss2... I: Configuring findutils... I: Configuring gzip... I: Configuring diff... I: Configuring libvolume-id1... I: Configuring libselinux1... I: Configuring libstdc++6... I: Configuring coreutils... I: Configuring makedev... I: Configuring lzma... I: Configuring ncurses-base... I: Configuring ncurses-bin... I: Configuring tar... I: Configuring zlib1g... I: Configuring base-files... I: Configuring libdevmapper1.02.1... I: Configuring e2fslibs... I: Configuring dpkg... I: Configuring sysvinit-utils... I: Configuring bash... I: Configuring lsb-base... I: Configuring procps... I: Configuring perl-base... I: Configuring libtext-iconv-perl... I: Configuring liblocale-gettext-perl... I: Configuring libtext-charwidth-perl... I: Configuring libtext-wrapi18n-perl... I: Configuring debconf-i18n... I: Configuring debconf... I: Configuring tzdata... I: Configuring libpam-runtime... I: Configuring libpam0g... I: Configuring libpam-modules... I: Configuring passwd... I: Configuring login... I: Configuring libuuid1... I: Configuring libblkid1... I: Configuring e2fsprogs... I: Configuring util-linux... I: Configuring mount... I: Configuring initscripts... I: Configuring sysvinit... I: Unpacking the base system... I: Unpacking adduser... I: Unpacking apt... I: Unpacking apt-utils... I: Unpacking aptitude... I: Unpacking bsdmainutils... I: Unpacking cpio... I: Unpacking cron... I: Unpacking debian-archive-keyring... I: Unpacking dhcp3-client... I: Unpacking dhcp3-common... I: Unpacking ed... I: Unpacking gnupg... I: Unpacking gpgv... I: Unpacking groff-base... I: Unpacking ifupdown... I: Unpacking info... I: Unpacking iproute... I: Unpacking iptables... I: Unpacking iputils-ping... I: Unpacking libbz2-1.0... I: Unpacking libconsole... I: Unpacking libcwidget3... I: Unpacking libept0... I: Unpacking libgcrypt11... I: Unpacking libgdbm3... I: Unpacking libgnutls26... I: Unpacking libgpg-error0... I: Unpacking libncursesw5... I: Unpacking libnewt0.52... I: Unpacking libpopt0... I: Unpacking libreadline5... I: Unpacking libsasl2-2... I: Unpacking libsigc++-2.0-0c2a... I: Unpacking libssl0.9.8... I: Unpacking libtasn1-3... I: Unpacking libusb-0.1-4... I: Unpacking libusb-1.0-0... I: Unpacking libwrap0... I: Unpacking libxapian15... I: Unpacking logrotate... I: Unpacking man-db... I: Unpacking manpages... I: Unpacking module-init-tools... I: Unpacking nano... I: Unpacking net-tools... I: Unpacking netbase... I: Unpacking netcat-traditional... I: Unpacking readline-common... I: Unpacking rsyslog... I: Unpacking tasksel... I: Unpacking tasksel-data... I: Unpacking tcpd... I: Unpacking traceroute... I: Unpacking udev... I: Unpacking vim-common... I: Unpacking vim-tiny... I: Unpacking wget... I: Unpacking whiptail... I: Configuring the base system... I: Configuring module-init-tools... I: Configuring libgdbm3... I: Configuring libtasn1-3... I: Configuring libpopt0... I: Configuring libusb-0.1-4... I: Configuring libgpg-error0... I: Configuring libssl0.9.8... I: Configuring vim-common... I: Configuring netbase... I: Configuring libxapian15... I: Configuring libusb-1.0-0... I: Configuring adduser... I: Configuring traceroute... I: Configuring ed... I: Configuring manpages... I: Configuring iproute... I: Configuring wget... I: Configuring groff-base... I: Configuring libnewt0.52... I: Configuring net-tools... I: Configuring libsasl2-2... I: Configuring bsdmainutils... I: Configuring libsigc++-2.0-0c2a... I: Configuring netcat-traditional... I: Configuring libncursesw5... I: Configuring info... I: Configuring iputils-ping... I: Configuring libbz2-1.0... I: Configuring cron... I: Configuring nano... I: Configuring dhcp3-common... I: Configuring libconsole... I: Configuring udev... I: Configuring iptables... I: Configuring rsyslog... I: Configuring cpio... I: Configuring vim-tiny... I: Configuring readline-common... I: Configuring libwrap0... I: Configuring tcpd... I: Configuring man-db... I: Configuring libgcrypt11... I: Configuring whiptail... I: Configuring ifupdown... I: Configuring dhcp3-client... I: Configuring libreadline5... I: Configuring logrotate... I: Configuring libcwidget3... I: Configuring libgnutls26... I: Configuring gpgv... I: Configuring gnupg... I: Configuring debian-archive-keyring... I: Configuring apt... I: Configuring libept0... I: Configuring apt-utils... I: Configuring aptitude... I: Configuring tasksel-data... I: Configuring tasksel... I: Base system installed successfully. Internet Systems Consortium DHCP Client V3.1.2 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ modprobe: FATAL: Could not load /lib/modules/2.6.26-1-versatile/modules.dep: No such file or directory modprobe: FATAL: Could not load /lib/modules/2.6.26-1-versatile/modules.dep: No such file or directory SIOCSIFADDR: No such device modprobe: FATAL: Could not load /lib/modules/2.6.26-1-versatile/modules.dep: No such file or directory eth0: ERROR while getting interface flags: No such device modprobe: FATAL: Could not load /lib/modules/2.6.26-1-versatile/modules.dep: No such file or directory eth0: ERROR while getting interface flags: No such device modprobe: FATAL: Could not load /lib/modules/2.6.26-1-versatile/modules.dep: No such file or directory Bind socket to interface: No such device I: copying /etc/hosts from temporary location I: copying /etc/hostname from temporary location Err ftp://ftp.de.debian.org sid Release.gpg Could not resolve 'ftp.de.debian.org' Reading package lists... Done W: Failed to fetch ftp://ftp.de.debian.org/debian/dists/sid/Release.gpg Could not resolve 'ftp.de.debian.org' W: Some index files failed to download, they have been ignored, or old ones used instead. W: You may want to run apt-get update to correct these problems Reading package lists... Done Building dependency tree... Done Calculating upgrade... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Reading package lists... Done Building dependency tree... Done E: Couldn't find package build-essential -> received termination message from inside qemu with exit-code 0, killing child process (qemu:1143) -> successfully killed qemu
$ sudo LANG="C" qemubuilder --update --configfile
/home/christoph/.pbuilderrc-arm
forking: /sbin/fsck /media/extern/freeart/qemubuilder-arm/base
fsck 1.41.3 (12-Oct-2008)
e2fsck 1.41.3 (12-Oct-2008)
/media/extern/freeart/qemubuilder-arm/base: clean, 8875/196608 files,
77046/786431 blocks
forking: mke2fs -q -F -j -m1 -O sparse_super
/var/cache/pbuilder/build//qemu.4615.dev
forking: tune2fs -c 0 -i 0 /var/cache/pbuilder/build//qemu.4615.dev
tune2fs 1.41.3 (12-Oct-2008)
Setting maximal mount count to -1
Setting interval between checks to 0 seconds
forking: mount -o loop /var/cache/pbuilder/build//qemu.4615.dev
/var/cache/pbuilder/build//qemu.4615
forking: umount /var/cache/pbuilder/build//qemu.4615.dev
ioctl: LOOP_CLR_FD: Device or resource busy
forking: qemu-img create -f qcow -b
/media/extern/freeart/qemubuilder-arm/base
/var/cache/pbuilder/build//qemu.4615.cowdev
Formatting '/var/cache/pbuilder/build//qemu.4615.cowdev', fmt=qcow,
backing_file=/media/extern/freeart/qemubuilder-arm/base, size=3145727 kB
forking qemu: qemu-system-arm -nographic -M versatilepb -m 194 -kernel
/media/extern/freeart/qemubuilder-arm/vmlinuz-2.6.26-1-versatile -initrd
/media/extern/freeart/qemubuilder-arm/initrd.img-2.6.26-1-versatile -hda
/var/cache/pbuilder/build//qemu.4615.cowdev -hdb
/var/cache/pbuilder/build//qemu.4615.dev -append root=/dev/sda quiet
init=/pbuilder-run console=ttyAMA0 -serial stdio
Uncompressing
Linux......................................................................................
done, booting the kernel.
[ 0.000000] CLCD: unknown LCD panel ID 0x00001000, using VGA
Loading, please wait...
-> qemu-pbuilder first-stage
mount: proc already mounted
-> qemu-pbuilder second-stage
-> setting time to Mon May 4 18:16:12 2009
Mon May 4 18:16:12 UTC 2009
-> configuring network
lo Link encap:Local Loopback
LOOPBACK MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Internet Systems Consortium DHCP Client V3.1.2
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
No broadcast interfaces found - exiting.
I: copying /etc/hosts from temporary location
I: copying /etc/hostname from temporary location
Err ftp://ftp.de.debian.org sid Release.gpg
Could not resolve 'ftp.de.debian.org'
Reading package lists... Done
W: Failed to fetch ftp://ftp.de.debian.org/debian/dists/sid/Release.gpg Could
not resolve 'ftp.de.debian.org'
W: Some index files failed to download, they have been ignored, or old ones
used instead.
W: You may want to run apt-get update to correct these problems
Reading package lists... Done
Building dependency tree... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists... Done
Building dependency tree... Done
E: Couldn't find package build-essential
-> received termination message from inside qemu with exit-code 0, killing
child process (qemu:4643)
-> successfully killed qemu
-> commit change to qemu image
forking: qemu-img commit /var/cache/pbuilder/build//qemu.4615.cowdev
Image committed.
forking: mount -o loop /var/cache/pbuilder/build//qemu.4615.dev
/var/cache/pbuilder/build//qemu.4615
-> running post-run process
forking: umount /var/cache/pbuilder/build//qemu.4615.dev
-> clean up COW device files
KERNEL_IMAGE=/media/extern/freeart/qemubuilder-arm/vmlinuz-2.6.26-1-versatile INITRD=/media/extern/freeart/qemubuilder-arm/initrd.img-2.6.26-1-versatile ARCH=armel #BASEPATH=/media/extern/freeart/qemubuilder-arm/debian_lenny_armel_small.qcow BASEPATH=/media/extern/freeart/qemubuilder-arm/base MEMORY_MEGS=194 OTHERMIRROR="deb http://192.168.178.20/packs ./" BINDMOUNTS="/pbuildersymlink" HOOKDIR="/pbuildersymlink/hooks"
signature.asc
Description: Digital signature
