2009/5/3 Dominique Meeùs <domini...@d-meeus.be> > Maximi89 a écrit ce qui suit, le 03/05/09 21:47 : > >> maxim...@maximiliano:~$ sudo dpkg -l | grep bluez : ii bluez >> 4.35-0ubuntu1 >> > I wrote this on one line to keep the message shorter. After : ii etc. is > the result. You have to understand it as > sudo dpkg -l | grep bluez > ii bluez 4.35-0ubuntu1 > >> maxim...@maximiliano:~$ sudo /etc/init.d/bluetooth stop >> Stopping bluetooth: hcid. ... > > >> maxim...@maximiliano:~$ sudo hciconfig -a >> hci0: Type: USB BD Address: 00:11:67:CB:5D:87 ACL MTU: 1021:4 SCO MTU: >> 48:10 >> UP RUNNING PSCAN ISCAN RX bytes:1226 acl:0 sco:0 events:26 errors:0 >> TX bytes:347 acl:0 sco:0 commands:27 errors:0 Features: 0xff 0xfe 0xff >> 0x7e 0x98 0x19 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 >> Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: >> 'Maximiliano-0' Class: 0x080104 Service Classes: Capturing Device >> Class: Computer, Desktop workstation HCI Ver: 2.0 (0x3) HCI Rev: 0x302 >> LMP Ver: 2.0 (0x3) LMP Subver: 0x302 >> Manufacturer: Integrated System Solution Corp. (57) >> > In your case too, there is no more "hci0 command tx timeout" with bluetooth > stopped.
in my case i have a lot if i try to transfers files with bluetooth-applet [ 2034.124020] eth0: no IPv6 routers present [ 2629.953632] usb 2-2: USB disconnect, address 2 [ 2629.954009] btusb_bulk_complete: hci0 urb f481b5c0 failed to resubmit (19) [ 2629.954020] btusb_intr_complete: hci0 urb ef8567c0 failed to resubmit (19) [ 2629.955005] btusb_bulk_complete: hci0 urb f481b640 failed to resubmit (19) [ 2629.955471] btusb_send_frame: hci0 urb f481b6c0 submission failed [ 2629.987752] __set_isoc_interface: hci0 setting interface failed (19) [ 2633.580049] usb 2-2: new full speed USB device using ohci_hcd and address 4 [ 2633.804786] usb 2-2: New USB device found, idVendor=1131, idProduct=1004 [ 2633.804794] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2633.804799] usb 2-2: Product: ISSCEDRBTA [ 2633.804802] usb 2-2: Manufacturer: ISSC [ 2633.804929] usb 2-2: configuration #1 chosen from 1 choice [ 2634.457317] usb 2-2: USB disconnect, address 4 [ 2634.457727] btusb_bulk_complete: hci0 urb f481b5c0 failed to resubmit (19) [ 2634.457739] btusb_intr_complete: hci0 urb ef91f8c0 failed to resubmit (19) [ 2634.458726] btusb_bulk_complete: hci0 urb f4c6cec0 failed to resubmit (19) [ 2634.461581] btusb_send_frame: hci0 urb f4c6cf40 submission failed [ 2634.461597] __set_isoc_interface: hci0 setting interface failed (19) [ 2640.348039] usb 2-2: new full speed USB device using ohci_hcd and address 5 [ 2640.568353] usb 2-2: New USB device found, idVendor=1131, idProduct=1004 [ 2640.568361] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2640.568366] usb 2-2: Product: ISSCEDRBTA [ 2640.568370] usb 2-2: Manufacturer: ISSC [ 2640.568500] usb 2-2: configuration #1 chosen from 1 choice [ 2918.198211] usb 2-2: USB disconnect, address 5 [ 2920.896041] usb 2-2: new full speed USB device using ohci_hcd and address 6 [ 2921.124852] usb 2-2: New USB device found, idVendor=1131, idProduct=1004 [ 2921.124860] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2921.124865] usb 2-2: Product: ISSCEDRBTA [ 2921.124869] usb 2-2: Manufacturer: ISSC [ 2921.124998] usb 2-2: configuration #1 chosen from 1 choice [ 2994.696241] hci_cmd_task: hci0 command tx timeout [ 3049.227800] hci_cmd_task: hci0 command tx timeout [ 3817.808874] hci_cmd_task: hci0 command tx timeout [ 3855.659734] hci_cmd_task: hci0 command tx timeout Linux Maximiliano 2.6.29-1-686 #1 SMP Fri Apr 17 14:35:16 UTC 2009 i686 GNU/Linux today i get the phone to say "connect with Maximiliano-0" but only some times... later nothing, but when i press "yes" nothing happens, i try with kernel 2.6.26-1 and works great, with a newer kernel we think this works better than, but this don't happen. with the old kernel i can send and receive files, with newer one i can't. > > > This should be an important information to debug this problem. I am not > able to do it myself, so the next step should be to convince some developer > to take the problem seriously > > -- Maximiliano Augusto Castañón Araneda Santiago, Chile Linux user # 394821