Package: installation-reports
Severity: important
Boot method: CD
Image version: Self-made installation CD
Date: 2009-05-02
Machine: Self-made Desktop PC
Processor: Athlon XP 2600+
Memory: 512MB
Partitions: <df -Tl will do; the raw partition table is preferred>
Dateisystem Typ 1K‐Blöcke Benutzt Verfügbar Ben% Eingehängt auf
/dev/hdb1 ext3 19228276 4341096 13910432 24% /
tmpfs tmpfs 258144 0 258144 0% /lib/init/rw
udev tmpfs 10240 108 10132 2% /dev
tmpfs tmpfs 258144 0 258144 0% /dev/shm
/dev/hdb6 ext3 94687664 1089752 88788056 2% /home
/dev/hda5 fuseblk 14603052 921508 13681544 7% /share
Output of lspci -knn (or lspci -nn):
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333] [1106:3099]
Kernel driver in use: agpgart-via
Kernel modules: via-agp
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333 AGP] [1106:b099]
Kernel modules: shpchp
00:09.0 Multimedia audio controller [0401]: Creative Labs SB Audigy [1102:0004]
(rev 04)
Kernel driver in use: EMU10K1_Audigy
Kernel modules: snd-emu10k1
00:09.1 Input device controller [0980]: Creative Labs SB Audigy Game Port
[1102:7003] (rev 04)
Kernel driver in use: Emu10k1_gameport
Kernel modules: emu10k1-gp
00:09.2 FireWire (IEEE 1394) [0c00]: Creative Labs SB Audigy FireWire Port
[1102:4001] (rev 04)
Kernel driver in use: ohci1394
Kernel modules: ohci1394
00:0a.0 Multimedia controller [0480]: Philips Semiconductors SAA7134/SAA7135HL
Video Broadcast Decoder [1131:7134] (rev 01)
Kernel driver in use: saa7134
Kernel modules: saa7134
00:0b.0 Network controller [0280]: RaLink RT2500 802.11g Cardbus/mini-PCI
[1814:0201] (rev 01)
Kernel driver in use: rt2500pci
Kernel modules: rt2500pci
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 80)
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 80)
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 80)
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.3 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev
82)
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8235 ISA Bridge [1106:3177]
Kernel modules: i2c-viapro, via-ircc
00:11.1 IDE interface [0101]: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06)
Kernel driver in use: VIA_IDE
Kernel modules: via82cxxx
00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II]
[1106:3065] (rev 74)
Kernel driver in use: via-rhine
Kernel modules: via-rhine
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 AP [Radeon
9600] [1002:4150]
Kernel modules: radeonfb
01:00.1 Display controller [0380]: ATI Technologies Inc RV350 AP [Radeon 9600]
(Secondary) [1002:4170]
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [E]
Detect network card: [ ]
Configure network: [ ]
Detect CD: [ ]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Install base system: [ ]
Clock/timezone setup: [ ]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems:
Drives:
/dev/hda: 40GB Harddisk
/dev/hdb: 120GB Harddisk
/dev/hdc: DVD-ROM
/dev/hdd: CD Writer
If i boot from DVD-ROM (/dev/hdc), loading of kernel fails with the message:
hdd: drive not ready for command
/dev/hdd is an old CD Writer:
AOpen Model No. CRW2440 Manufactured 12/2001
With etch, this CD Writer works perfectly.
If you need further informations, please let me know.
Regards
Bernhard
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
