Package: linux-image-2.6.26-2-686 Version: 2.6.26-15 Severity: important After upgrading a SuperMicro SuperServer 5013-MT server from etch to lenny I started getting numerous hard resets on all of the sata ports. The 4-port sata controller is a Marvell MV88SX5041. Looking around a bit it seems that the error reported is a timeout error. A very similar bug was filed under number 514155 for the 508x/6081 8-port controller chips.
I am using LVM2 on MD raid 1 and raid 5. Disabling write caching significantly reduced the number of resets; but didn't eliminate them. I'm using all four ports. Two of each of the following drives: # smartctl -a /dev/sda smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Western Digital Caviar SE Serial ATA family Device Model: WDC WD1600JD-00HBB0 Serial Number: WD-WMAL93632635 Firmware Version: 08.02D08 User Capacity: 160,041,885,696 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Apr 20 08:46:53 2009 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled # smartctl -a /dev/sdc smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Second Generation Serial ATA family Device Model: WDC WD1600JS-00MHB0 Serial Number: WD-WCANM5801449 Firmware Version: 02.01C03 User Capacity: 160,041,885,696 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Apr 20 08:48:15 2009 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled -- Package-specific info: ** Version: Linux version 2.6.26-2-686 (Debian 2.6.26-15) (da...@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu Mar 26 01:08:11 UTC 2009 ** Command line: root=/dev/mapper/vg00-lvol00 ro ** Not tainted ** Kernel log: [455303.419050] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [455303.439051] ata2.00: configured for UDMA/133 [455303.439051] ata2: EH complete [455303.439051] sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) [455303.439051] sd 1:0:0:0: [sdb] Write Protect is off [455303.439051] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [455303.439051] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [458708.100929] kjournald starting. Commit interval 5 seconds [458708.116094] EXT3 FS on dm-3, internal journal [458708.135538] ext3_orphan_cleanup: deleting unreferenced inode 294977 [458708.135538] EXT3-fs: dm-3: 1 orphan inode deleted [458708.135538] EXT3-fs: recovery complete. [458708.241394] EXT3-fs: mounted filesystem with ordered data mode. [458866.006763] kjournald starting. Commit interval 5 seconds [458866.009491] EXT3 FS on dm-3, internal journal [458866.009519] EXT3-fs: mounted filesystem with ordered data mode. [478262.658699] kjournald starting. Commit interval 5 seconds [478262.673607] EXT3 FS on dm-3, internal journal [478262.686712] ext3_orphan_cleanup: deleting unreferenced inode 294977 [478262.686712] EXT3-fs: dm-3: 1 orphan inode deleted [478262.686712] EXT3-fs: recovery complete. [478262.827577] EXT3-fs: mounted filesystem with ordered data mode. [478410.566612] kjournald starting. Commit interval 5 seconds [478410.568461] EXT3 FS on dm-3, internal journal [478410.568491] EXT3-fs: mounted filesystem with ordered data mode. [577145.938893] kjournald starting. Commit interval 5 seconds [577145.947570] EXT3 FS on dm-3, internal journal [577145.960942] ext3_orphan_cleanup: deleting unreferenced inode 294977 [577145.960942] EXT3-fs: dm-3: 1 orphan inode deleted [577145.960942] EXT3-fs: recovery complete. [577146.036448] EXT3-fs: mounted filesystem with ordered data mode. [577365.382913] kjournald starting. Commit interval 5 seconds [577365.394878] EXT3 FS on dm-3, internal journal [577365.394906] EXT3-fs: mounted filesystem with ordered data mode. [593245.683756] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [593245.683793] ata2.00: cmd ca/00:08:9b:d6:3b/00:00:00:00:00/e0 tag 0 dma 4096 out [593245.683797] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [593245.683862] ata2.00: status: { DRDY } [593245.683893] ata2: hard resetting link [593246.245194] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [593246.304561] ata2.00: configured for UDMA/133 [593246.304561] ata2: EH complete [593246.304561] sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) [593246.319992] sd 1:0:0:0: [sdb] Write Protect is off [593246.319992] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [593246.332563] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [643373.574483] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [643373.574530] ata1.00: cmd c8/00:08:c3:d2:27/00:00:00:00:00/e2 tag 0 dma 4096 in [643373.574533] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [643373.574600] ata1.00: status: { DRDY } [643373.574628] ata1: hard resetting link [643374.089995] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [643374.160557] ata1.00: configured for UDMA/133 [643374.160557] ata1: EH complete [643374.236238] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [643374.264238] sd 0:0:0:0: [sda] Write Protect is off [643374.264238] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [643374.316393] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [662042.014917] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [662042.014984] ata1.00: cmd ca/00:08:e3:92:82/00:00:00:00:00/e0 tag 0 dma 4096 out [662042.014987] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [662042.015058] ata1.00: status: { DRDY } [662042.015089] ata1: hard resetting link [662042.487683] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [662042.588612] ata1.00: configured for UDMA/133 [662042.588612] ata1: EH complete [662042.588612] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [662042.588612] sd 0:0:0:0: [sda] Write Protect is off [662042.588612] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [662042.588612] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [663965.139482] kjournald starting. Commit interval 5 seconds [663965.156359] EXT3 FS on dm-3, internal journal [663965.193787] ext3_orphan_cleanup: deleting unreferenced inode 294977 [663965.193814] EXT3-fs: dm-3: 1 orphan inode deleted [663965.193836] EXT3-fs: recovery complete. [663965.312069] EXT3-fs: mounted filesystem with ordered data mode. [664090.845743] kjournald starting. Commit interval 5 seconds [664090.853739] EXT3 FS on dm-3, internal journal [664090.853739] EXT3-fs: mounted filesystem with ordered data mode. [701539.052347] kjournald starting. Commit interval 5 seconds [701539.081501] EXT3 FS on dm-3, internal journal [701539.108971] ext3_orphan_cleanup: deleting unreferenced inode 294977 [701539.108971] EXT3-fs: dm-3: 1 orphan inode deleted [701539.108971] EXT3-fs: recovery complete. [701539.243761] EXT3-fs: mounted filesystem with ordered data mode. [701678.992019] kjournald starting. Commit interval 5 seconds [701679.004094] EXT3 FS on dm-3, internal journal [701679.004124] EXT3-fs: mounted filesystem with ordered data mode. [702662.709396] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [702662.709444] ata2.00: cmd ca/00:08:03:53:3c/00:00:00:00:00/e0 tag 0 dma 4096 out [702662.709447] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [702662.709518] ata2.00: status: { DRDY } [702662.709549] ata2: hard resetting link [702663.221598] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [702663.293557] ata2.00: configured for UDMA/133 [702663.293557] ata2: EH complete [702663.293557] sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) [702663.346525] sd 1:0:0:0: [sdb] Write Protect is off [702663.346525] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [702663.353556] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ** Loaded modules: Module Size Used by ppdev 6500 0 lp 8164 0 ipv6 235364 33 tcp_diag 1472 0 inet_diag 8392 1 tcp_diag ide_generic 2464 0 [permanent] ide_disk 10496 0 snd_pcm 62596 0 snd_timer 17800 1 snd_pcm snd 45604 2 snd_pcm,snd_timer soundcore 6368 1 snd parport_pc 22500 1 snd_page_alloc 7816 1 snd_pcm psmouse 32336 0 parport 30988 3 ppdev,lp,parport_pc i2c_i801 7920 0 pcspkr 2432 0 i2c_core 19828 1 i2c_i801 serio_raw 4740 0 intel_rng 4576 0 rng_core 3940 1 intel_rng button 6096 0 iTCO_wdt 9508 0 intel_agp 22556 1 agpgart 28776 1 intel_agp shpchp 25528 0 pci_hotplug 23460 1 shpchp i82875p_edac 4936 0 edac_core 36144 1 i82875p_edac evdev 8000 0 ext3 105512 4 jbd 39444 1 ext3 mbcache 7108 1 ext3 dm_mirror 15104 0 dm_log 8484 1 dm_mirror raid1 18016 2 md_mod 67036 3 raid1 ide_cd_mod 27652 0 cdrom 30176 1 ide_cd_mod ata_piix 14180 0 sd_mod 22200 11 ata_generic 4676 0 piix 6568 0 [permanent] floppy 47748 0 sata_mv 20876 8 libata 140416 3 ata_piix,ata_generic,sata_mv ide_pci_generic 3908 0 [permanent] ide_core 96136 5 ide_generic,ide_disk,ide_cd_mod,piix,ide_pci_generic scsi_mod 129324 2 sd_mod,libata dock 8304 1 libata ehci_hcd 28396 0 e1000 102560 0 uhci_hcd 18672 0 usbcore 118224 3 ehci_hcd,uhci_hcd thermal 15228 0 processor 32544 1 thermal fan 4164 0 thermal_sys 10856 3 thermal,processor,fan dm_snapshot 14340 0 dm_mod 46184 10 dm_mirror,dm_log,dm_snapshot ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82875P/E7210 Memory Controller Hub [8086:2578] (rev 02) Subsystem: Super Micro Computer Inc Device [15d9:5180] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Capabilities: <access denied> Kernel driver in use: agpgart-intel Kernel modules: intel-agp, i82875p_edac 00:03.0 PCI bridge [0604]: Intel Corporation 82875P/E7210 Processor to PCI to CSA Bridge [8086:257b] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fa100000-fa1fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Kernel modules: shpchp 00:06.0 System peripheral [0880]: Intel Corporation 82875P/E7210 Processor to I/O Memory Interface [8086:257e] (rev 02) Subsystem: Intel Corporation 82875P/E7210 Processor to I/O Memory Interface [8086:257e] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: Memory at fecf0000 (32-bit, non-prefetchable) [size=4K] 00:1c.0 PCI bridge [0604]: Intel Corporation 6300ESB 64-bit PCI-X Bridge [8086:25ae] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=64 Memory behind bridge: fa000000-fa0fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation 6300ESB USB Universal Host Controller [8086:25a9] (rev 02) (prog-if 00 [UHCI]) Subsystem: Super Micro Computer Inc Device [15d9:5180] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at e100 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 6300ESB USB Universal Host Controller [8086:25aa] (rev 02) (prog-if 00 [UHCI]) Subsystem: Super Micro Computer Inc Device [15d9:5180] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at e000 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.4 System peripheral [0880]: Intel Corporation 6300ESB Watchdog Timer [8086:25ab] (rev 02) Subsystem: Super Micro Computer Inc Device [15d9:5180] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: Memory at fa201000 (32-bit, non-prefetchable) [size=16] Kernel modules: i6300esb 00:1d.5 PIC [0800]: Intel Corporation 6300ESB I/O Advanced Programmable Interrupt Controller [8086:25ac] (rev 02) (prog-if 20 [IO(X)-APIC]) Subsystem: Intel Corporation 6300ESB I/O Advanced Programmable Interrupt Controller [8086:25ac] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1d.7 USB Controller [0c03]: Intel Corporation 6300ESB USB2 Enhanced Host Controller [8086:25ad] (rev 02) (prog-if 20 [EHCI]) Subsystem: Super Micro Computer Inc Device [15d9:5180] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 0: Memory at fa200000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 0a) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f8000000-f9ffffff Prefetchable memory behind bridge: 40000000-400fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Kernel modules: shpchp 00:1f.0 ISA bridge [0601]: Intel Corporation 6300ESB LPC Interface Controller [8086:25a1] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel modules: intel-rng, iTCO_wdt 00:1f.1 IDE interface [0101]: Intel Corporation 6300ESB PATA Storage Controller [8086:25a2] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Super Micro Computer Inc Device [15d9:5180] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at f000 [size=16] Region 5: Memory at 40100000 (32-bit, non-prefetchable) [size=1K] Kernel driver in use: PIIX_IDE Kernel modules: piix 00:1f.2 IDE interface [0101]: Intel Corporation 6300ESB SATA Storage Controller [8086:25a3] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Super Micro Computer Inc Device [15d9:5180] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at e200 [size=8] Region 1: I/O ports at e300 [size=4] Region 2: I/O ports at e400 [size=8] Region 3: I/O ports at e500 [size=4] Region 4: I/O ports at e600 [size=16] Kernel driver in use: ata_piix Kernel modules: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 6300ESB SMBus Controller [8086:25a4] (rev 02) Subsystem: Super Micro Computer Inc Device [15d9:5180] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 0500 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 01:01.0 Ethernet controller [0200]: Intel Corporation 82547GI Gigabit Ethernet Controller [8086:1075] Subsystem: Intel Corporation PRO/1000 CT Network Connection [8086:1075] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 (63750ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fa100000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at c000 [size=32] Capabilities: <access denied> Kernel driver in use: e1000 Kernel modules: e1000 02:04.0 RAID bus controller [0104]: Marvell Technology Group Ltd. MV88SX5041 4-port SATA I PCI-X Controller [11ab:5041] Subsystem: Super Micro Computer Inc Device [15d9:5180] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 128 bytes Interrupt: pin A routed to IRQ 27 Region 0: Memory at fa000000 (64-bit, non-prefetchable) [size=512K] Capabilities: <access denied> Kernel driver in use: sata_mv Kernel modules: sata_mv 03:09.0 VGA compatible controller [0300]: ATI Technologies Inc Rage XL [1002:4752] (rev 27) (prog-if 00 [VGA controller]) Subsystem: Super Micro Computer Inc Device [15d9:5180] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (2000ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 9 Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=16M] Region 1: I/O ports at d000 [size=256] Region 2: Memory at f9040000 (32-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at 40000000 [disabled] [size=128K] Capabilities: <access denied> 03:0a.0 Ethernet controller [0200]: Intel Corporation 82541GI Gigabit Ethernet Controller [8086:1076] Subsystem: Intel Corporation PRO/1000 MT Network Connection [8086:1076] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (63750ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at f9000000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at d100 [size=64] Capabilities: <access denied> Kernel driver in use: e1000 Kernel modules: e1000 -- System Information: Debian Release: 5.0.1 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.26-2-686 (SMP w/2 CPU cores) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.26-2-686 depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.26-2-686 recommends: ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.26-2-686 suggests: ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.26 <none> (no description available) -- debconf information: linux-image-2.6.26-2-686/postinst/bootloader-error-2.6.26-2-686: linux-image-2.6.26-2-686/postinst/bootloader-test-error-2.6.26-2-686: linux-image-2.6.26-2-686/postinst/depmod-error-2.6.26-2-686: false linux-image-2.6.26-2-686/preinst/bootloader-initrd-2.6.26-2-686: true linux-image-2.6.26-2-686/postinst/create-kimage-link-2.6.26-2-686: true linux-image-2.6.26-2-686/preinst/initrd-2.6.26-2-686: linux-image-2.6.26-2-686/postinst/kimage-is-a-directory: linux-image-2.6.26-2-686/postinst/old-initrd-link-2.6.26-2-686: true linux-image-2.6.26-2-686/prerm/removing-running-kernel-2.6.26-2-686: true shared/kernel-image/really-run-bootloader: true linux-image-2.6.26-2-686/postinst/old-dir-initrd-link-2.6.26-2-686: true linux-image-2.6.26-2-686/preinst/overwriting-modules-2.6.26-2-686: true linux-image-2.6.26-2-686/preinst/abort-overwrite-2.6.26-2-686: linux-image-2.6.26-2-686/preinst/abort-install-2.6.26-2-686: linux-image-2.6.26-2-686/postinst/depmod-error-initrd-2.6.26-2-686: false linux-image-2.6.26-2-686/preinst/failed-to-move-modules-2.6.26-2-686: linux-image-2.6.26-2-686/preinst/lilo-has-ramdisk: linux-image-2.6.26-2-686/prerm/would-invalidate-boot-loader-2.6.26-2-686: true linux-image-2.6.26-2-686/preinst/elilo-initrd-2.6.26-2-686: true linux-image-2.6.26-2-686/preinst/lilo-initrd-2.6.26-2-686: true linux-image-2.6.26-2-686/postinst/old-system-map-link-2.6.26-2-686: true -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
