Package: linux-image-2.6.26-2-686
Version: 2.6.26-15
Severity: important
Wireless Function key works when asus_acpi module is unloaded but not when it
is loaded. When the module loads I notice this from
dmesg:
[ 744.363332] Asus Laptop ACPI Extras version 0.30
[ 744.371332] BSTS called, 0x9f7f returned
[ 744.371332] unsupported model U3S, trying default values
[ 744.371332] send /proc/acpi/dsdt to the developers
It seems that the fact the module doesn't have support for my laptop (U3S)
might be what is causing the acpi-support scripts to
fail.
I guess in newer kernels this is probably already supported?
Here are some tests I did while monitoring the LED lights and ACPI events with
acpi_listen.
<fresh boot>
<bluetooth LED on>
<wifi LED off>
<fn + F2>
u3s:~# acpi_listen
hotkey ATKD 0000005e 00000000
hotkey ATKD 0000007d 00000000
<wifi LED blinks on for a split second and back off>
<bluetooth LED stays on>
<fn + f2>
acpi_listen shows:
hotkey ATKD 0000005e 00000001
hotkey ATKD 0000007d 00000001
<wifi LED blinks on for a split second and back off>
<bluetooth LED stays on>
<fn + f2>
acpi_listen shows:
hotkey ATKD 0000005e 00000002
hotkey ATKD 0000007d 00000002
<wifi LED blinks on for a split second and back off>
<bluetooth LED stays on>
u3s:~# modprobe -r asus_acpi
<fn + f2>
acpi_listen has no new output
<wifi LED comes on and stays on>
<bluetooth LED stays on>
I can get on wireless networks now.
<fn + f2>
acpi_listen has no new output
<wifi LED goes off>
<bluetooth LED goes off>
<fn + f2>
acpi_listen has no new output
<wifi LED comes on>
<bluetooth LED stays off>
<fn + f2>
acpi_listen show no new output
<wifi LED goes off>
<bluetooth LED comes on>
<fn + f2>
acpi_listen shows no new output
<wifi LED comes on>
<bluetooth LED stays on>
In addition to the Fn + F2 key to turn off the wireless/bluetooth there is also
a switch on the left side of the laptop which has
largely the same effect/behavior as using the FN + F2 key.
John Brier
-- Package-specific info:
** Version:
Linux version 2.6.26-2-686 (Debian 2.6.26-15) (da...@debian.org) (gcc version
4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu Mar 26 01:08:11 UTC
2009
** Command line:
root=/dev/mapper/vg_u3s-lv_root ro vga=0x317
** Not tainted
** Kernel log:
[ 3869.203133] wlan0: associated
[ 3870.693633] usb 5-2: USB disconnect, address 4
[ 3873.164377] wlan0: RX deauthentication from 00:0f:66:dc:fe:e0 (reason=15)
[ 3873.164387] wlan0: deauthenticated
[ 3873.165503] iwl4965: index 0 not used in uCode key table.
[ 3873.172226] iwl4965: index 0 not used in uCode key table.
[ 3874.163811] wlan0: authenticate with AP 00:0f:66:dc:fe:e0
[ 3874.165741] wlan0: RX authentication from 00:0f:66:dc:fe:e0 (alg=0
transaction=2 status=0)
[ 3874.165749] wlan0: authenticated
[ 3874.165756] wlan0: associate with AP 00:0f:66:dc:fe:e0
[ 3874.168201] wlan0: RX ReassocResp from 00:0f:66:dc:fe:e0 (capab=0x411
status=0 aid=2)
[ 3874.168208] wlan0: associated
[ 3874.168231] wlan0: switched to short barker preamble
(BSSID=00:0f:66:dc:fe:e0)
[ 3879.442763] usb 5-2: new full speed USB device using uhci_hcd and address 5
[ 3879.709296] usb 5-2: configuration #1 chosen from 1 choice
[ 3879.718885] usb 5-2: New USB device found, idVendor=0b05, idProduct=1712
[ 3879.718898] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 3879.718904] usb 5-2: SerialNumber: 0194E8-5B-0002
[ 3906.541388] iwl4965: Radio Frequency Kill Switch is On:
[ 3906.541393] Kill switch must be turned off for wireless networking to work.
[ 3908.585904] Registered led device: iwl-phy0:radio
[ 3908.585904] Registered led device: iwl-phy0:assoc
[ 3908.585904] Registered led device: iwl-phy0:RX
[ 3908.585904] Registered led device: iwl-phy0:TX
[ 3908.591436] wlan0: Initial auth_alg=0
[ 3908.591454] wlan0: authenticate with AP 00:0f:66:dc:fe:e0
[ 3908.594451] wlan0: RX authentication from 00:0f:66:dc:fe:e0 (alg=0
transaction=2 status=0)
[ 3908.594451] wlan0: authenticated
[ 3908.594451] wlan0: associate with AP 00:0f:66:dc:fe:e0
[ 3908.596655] wlan0: RX ReassocResp from 00:0f:66:dc:fe:e0 (capab=0x411
status=0 aid=2)
[ 3908.596655] wlan0: associated
[ 3910.231402] usb 5-2: USB disconnect, address 5
[ 3912.563969] wlan0: RX deauthentication from 00:0f:66:dc:fe:e0 (reason=15)
[ 3912.563969] wlan0: deauthenticated
[ 3912.572556] iwl4965: index 0 not used in uCode key table.
[ 3913.569027] wlan0: authenticate with AP 00:0f:66:dc:fe:e0
[ 3913.570908] wlan0: RX authentication from 00:0f:66:dc:fe:e0 (alg=0
transaction=2 status=0)
[ 3913.570916] wlan0: authenticated
[ 3913.570923] wlan0: associate with AP 00:0f:66:dc:fe:e0
[ 3913.573278] wlan0: RX ReassocResp from 00:0f:66:dc:fe:e0 (capab=0x411
status=0 aid=2)
[ 3913.573278] wlan0: associated
[ 3913.573301] wlan0: switched to short barker preamble
(BSSID=00:0f:66:dc:fe:e0)
[ 3937.817153] usb 5-2: new full speed USB device using uhci_hcd and address 6
[ 3938.082793] usb 5-2: configuration #1 chosen from 1 choice
[ 3938.090782] usb 5-2: New USB device found, idVendor=0b05, idProduct=1712
[ 3938.090782] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 3938.090782] usb 5-2: SerialNumber: 0194E8-5B-0002
[ 3943.580469] iwl4965: Radio Frequency Kill Switch is On:
[ 3943.580469] Kill switch must be turned off for wireless networking to work.
[ 3945.777761] Registered led device: iwl-phy0:radio
[ 3945.777761] Registered led device: iwl-phy0:assoc
[ 3945.777761] Registered led device: iwl-phy0:RX
[ 3945.777761] Registered led device: iwl-phy0:TX
[ 3945.788891] wlan0: Initial auth_alg=0
[ 3945.788891] wlan0: authenticate with AP 00:0f:66:dc:fe:e0
[ 3945.793239] wlan0: RX authentication from 00:0f:66:dc:fe:e0 (alg=0
transaction=2 status=0)
[ 3945.793239] wlan0: authenticated
[ 3945.793239] wlan0: associate with AP 00:0f:66:dc:fe:e0
[ 3945.795161] wlan0: RX ReassocResp from 00:0f:66:dc:fe:e0 (capab=0x411
status=0 aid=2)
[ 3945.795161] wlan0: associated
[ 3947.408959] usb 5-2: USB disconnect, address 6
[ 3949.754903] wlan0: RX deauthentication from 00:0f:66:dc:fe:e0 (reason=15)
[ 3949.754903] wlan0: deauthenticated
[ 3949.760419] iwl4965: index 0 not used in uCode key table.
[ 3950.750440] wlan0: authenticate with AP 00:0f:66:dc:fe:e0
[ 3950.752264] wlan0: RX authentication from 00:0f:66:dc:fe:e0 (alg=0
transaction=2 status=0)
[ 3950.752264] wlan0: authenticated
[ 3950.752264] wlan0: associate with AP 00:0f:66:dc:fe:e0
[ 3950.754677] wlan0: RX ReassocResp from 00:0f:66:dc:fe:e0 (capab=0x411
status=0 aid=2)
[ 3950.754677] wlan0: associated
[ 3950.754677] wlan0: switched to short barker preamble
(BSSID=00:0f:66:dc:fe:e0)
[ 3957.763825] usb 5-2: new full speed USB device using uhci_hcd and address 7
[ 3958.035002] usb 5-2: configuration #1 chosen from 1 choice
[ 3958.041347] usb 5-2: New USB device found, idVendor=0b05, idProduct=1712
[ 3958.041347] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 3958.041347] usb 5-2: SerialNumber: 0194E8-5B-0002
[ 3962.628012] iwl4965: Radio Frequency Kill Switch is On:
[ 3962.628016] Kill switch must be turned off for wireless networking to work.
[ 3964.831991] Registered led device: iwl-phy0:radio
[ 3964.831991] Registered led device: iwl-phy0:assoc
[ 3964.831991] Registered led device: iwl-phy0:RX
[ 3964.831991] Registered led device: iwl-phy0:TX
[ 3964.840921] wlan0: Initial auth_alg=0
[ 3964.840921] wlan0: authenticate with AP 00:0f:66:dc:fe:e0
[ 3964.843545] wlan0: RX authentication from 00:0f:66:dc:fe:e0 (alg=0
transaction=2 status=0)
[ 3964.843545] wlan0: authenticated
[ 3964.843545] wlan0: associate with AP 00:0f:66:dc:fe:e0
[ 3964.846065] wlan0: RX ReassocResp from 00:0f:66:dc:fe:e0 (capab=0x411
status=0 aid=2)
[ 3964.846065] wlan0: associated
[ 3966.443330] usb 5-2: USB disconnect, address 7
[ 3968.807690] wlan0: RX deauthentication from 00:0f:66:dc:fe:e0 (reason=15)
[ 3968.807690] wlan0: deauthenticated
[ 3968.812152] iwl4965: index 0 not used in uCode key table.
[ 3969.804313] wlan0: authenticate with AP 00:0f:66:dc:fe:e0
[ 3969.805917] wlan0: RX authentication from 00:0f:66:dc:fe:e0 (alg=0
transaction=2 status=0)
[ 3969.805917] wlan0: authenticated
[ 3969.805917] wlan0: associate with AP 00:0f:66:dc:fe:e0
[ 3969.807981] wlan0: RX ReassocResp from 00:0f:66:dc:fe:e0 (capab=0x411
status=0 aid=2)
[ 3969.807981] wlan0: associated
[ 3969.807981] wlan0: switched to short barker preamble
(BSSID=00:0f:66:dc:fe:e0)
** Loaded modules:
Module Size Used by
asus_acpi 13852 0
i915 25280 2
drm 65192 3 i915
binfmt_misc 7528 1
rfcomm 28272 0
l2cap 17248 5 rfcomm
ppdev 6500 0
parport_pc 22500 0
lp 8164 0
parport 30988 3 ppdev,parport_pc,lp
ipv6 235364 16
acpi_cpufreq 6796 1
cpufreq_conservative 5960 0
cpufreq_stats 3776 0
cpufreq_ondemand 6476 1
freq_table 4224 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
cpufreq_powersave 1856 0
cpufreq_userspace 3172 0
sbp2 18572 0
loop 12748 0
joydev 8480 0
arc4 1824 2
ecb 2624 2
crypto_blkcipher 15236 1 ecb
iwl4965 92872 0
firmware_class 6816 1 iwl4965
iwlcore 23520 1 iwl4965
rfkill 5652 2 iwlcore
tpm_infineon 6984 0
tpm 12928 1 tpm_infineon
tpm_bios 5472 1 tpm
mac80211 139712 2 iwl4965,iwlcore
uvcvideo 45704 0
snd_hda_intel 325688 1
pcspkr 2432 0
compat_ioctl32 1312 1 uvcvideo
serio_raw 4740 0
hci_usb 12252 0
snd_pcm 62596 1 snd_hda_intel
snd_seq 41456 0
snd_timer 17800 2 snd_pcm,snd_seq
snd_seq_device 6380 1 snd_seq
videodev 27520 1 uvcvideo
cfg80211 21576 2 iwl4965,mac80211
psmouse 32336 0
bluetooth 44868 5 rfcomm,l2cap,hci_usb
v4l1_compat 12260 2 uvcvideo,videodev
iTCO_wdt 9508 0
snd 45604 7
snd_hda_intel,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore 6368 1 snd
snd_page_alloc 7816 2 snd_hda_intel,snd_pcm
led_class 3908 1 iwlcore
intel_agp 22556 1
video 16432 0
output 2912 1 video
battery 10180 0
ac 4196 0
agpgart 28776 3 drm,intel_agp
button 6096 0
evdev 8000 9
ext3 105512 2
jbd 39444 1 ext3
mbcache 7108 1 ext3
dm_mirror 15104 0
dm_log 8484 1 dm_mirror
dm_snapshot 14340 0
dm_mod 46184 8 dm_mirror,dm_log,dm_snapshot
piix 6568 0 [permanent]
ide_pci_generic 3908 0 [permanent]
ide_core 96136 2 piix,ide_pci_generic
sd_mod 22200 3
sdhci 13060 0
mmc_core 39900 1 sdhci
ata_generic 4676 0
ohci1394 24944 0
ieee1394 75800 2 sbp2,ohci1394
ahci 23596 2
libata 140416 2 ata_generic,ahci
scsi_mod 129324 3 sbp2,sd_mod,libata
dock 8304 1 libata
r8169 23684 0
ehci_hcd 28396 0
uhci_hcd 18672 0
usbcore 118224 5 uvcvideo,hci_usb,ehci_hcd,uhci_hcd
thermal 15228 0
processor 32544 4 acpi_cpufreq,thermal
fan 4164 0
thermal_sys 10856 4 video,thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory
Controller Hub [8086:2a00] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:1597]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960
Integrated Graphics Controller [8086:2a02] (rev 03) (prog-if 00 [VGA
controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:14e2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at feb00000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at ec00 [size=8]
Capabilities: <access denied>
Kernel modules: intelfb
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960
Integrated Graphics Controller [8086:2a03] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:14e2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fe900000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #4 [8086:2834] (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1597]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at e000 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #5 [8086:2835] (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1597]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at dc00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #2 [8086:283a] (rev 03) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1597]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at feaff400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller [8086:284b] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:1613]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at feaf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR+ <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fdb00000-fdbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 2 [8086:2841] (rev 03) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: fdc00000-fdcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 3 [8086:2843] (rev 03) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 4 [8086:2845] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fdd00000-fddfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 5 [8086:2847] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=06, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fde00000-fe5fffff
Prefetchable memory behind bridge: 00000000dba00000-00000000dd9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 6 [8086:2849] (rev 03) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #1 [8086:2830] (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1597]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #2 [8086:2831] (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1597]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #3 [8086:2832] (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1597]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d480 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #1 [8086:2836] (rev 03) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1597]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev f3) (prog-if 01 [Subtractive decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=08, subordinate=08, sec-latency=32
Memory behind bridge: fe600000-fe6fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface
Controller [8086:2815] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:1597]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E)
IDE Controller [8086:2850] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:1597]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E)
SATA AHCI Controller [8086:2829] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:1597]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 216
Region 0: I/O ports at e880 [size=8]
Region 1: I/O ports at e800 [size=4]
Region 2: I/O ports at e480 [size=8]
Region 3: I/O ports at e400 [size=4]
Region 4: I/O ports at e080 [size=32]
Region 5: Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:11f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR+ <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 217
Region 0: I/O ports at a800 [size=256]
Region 2: Memory at fdbff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at fdbc0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
02:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 4965 AG or
AGN [Kedron] Network Connection [8086:4229] (rev 61)
Subsystem: Intel Corporation Device [8086:1100]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 215
Region 0: Memory at fdcfe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwl4965
Kernel modules: iwl4965
04:00.0 SATA controller [0106]: JMicron Technologies, Inc. JMicron 20360/20363
AHCI Controller [197b:2360] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:1348]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at bc00 [size=8]
Region 1: I/O ports at b880 [size=4]
Region 2: I/O ports at b800 [size=8]
Region 3: I/O ports at b480 [size=4]
Region 4: I/O ports at b400 [size=16]
Region 5: Memory at fddfe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
08:03.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller
[1180:0832] (rev 05) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:0832]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fe6ff800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394
08:03.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro
Host Adapter [1180:0822] (rev 22)
Subsystem: ASUSTeK Computer Inc. Device [1043:1597]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 20
Region 0: Memory at fe6ff400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci
Kernel modules: sdhci
08:03.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host
Adapter [1180:0592] (rev 12)
Subsystem: ASUSTeK Computer Inc. Device [1043:0843]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 6
Region 0: Memory at fe6ff000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
08:03.3 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller
[1180:0852] (rev 12)
Subsystem: ASUSTeK Computer Inc. Device [1043:0592]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 6
Region 0: Memory at fe6fec00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
-- System Information:
Debian Release: 5.0.1
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-2-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-2-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-2-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information excluded
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
