Package: linux-image-2.6.26-2-686 Version: 2.6.26-15 Followup-For: Bug #507728
The problem also happens, when an usb-stick is connected via usb2.0-pci-card. I tested the same hardware, on the same computer with Windows XP -> no problem Etch with kernel 2.6.18 -> no problem Etch with kernel 2.6.24 -> no problem Lenny with kernel 2.6.24 -> no problem Lenny with kernel 2.6.26 -> problem Details: When i plug the stick in, tail -f /var/log/messages shows this: http://nopaste.debianforum.de/19374 Reading data from the stick is NO problem. But if i write to it, then it fails after some hundred megabytes with these messages: http://nopaste.debianforum.de/19375 lshal --monitor provides this info: Stick plugged in: Start monitoring devicelist: ------------------------------------------------- 22:20:19.820: usb_device_90c_1000_AA04012700012170 added 22:20:19.978: usb_device_90c_1000_AA04012700012170_if0 added 22:20:20.028: usb_device_90c_1000_AA04012700012170_usbraw added 22:20:25.136: usb_device_90c_1000_AA04012700012170_if0_scsi_host added 22:20:25.140: usb_device_90c_1000_AA04012700012170_if0_scsi_host_scsi_device_lun0 added 22:20:25.287: storage_serial_USB_2_0_Flash_Disk_AA04012700012170_0_0 added 22:20:25.294: storage_serial_USB_2_0_Flash_Disk_AA04012700012170_0_0 property info.interfaces = {'org.freedesktop.Hal.Device.Storage.Removable'} (new) 22:20:25.331: volume_uuid_49D3_5CDA added 22:20:33.563: volume_uuid_49D3_5CDA property volume.mount_point = '/media/disk' 22:20:33.566: volume_uuid_49D3_5CDA property volume.is_mounted = true Then i tried to write to it: 22:34:26.211: volume_uuid_49D3_5CDA property volume.mount_point = '' 22:34:26.213: volume_uuid_49D3_5CDA property volume.is_mounted = false 22:34:26.222: volume_uuid_49D3_5CDA removed 22:34:26.228: storage_serial_USB_2_0_Flash_Disk_AA04012700012170_0_0 removed 22:34:26.241: usb_device_90c_1000_AA04012700012170_if0_scsi_host_scsi_device_lun0 removed 22:34:26.243: usb_device_90c_1000_AA04012700012170_if0_scsi_host removed 22:34:26.269: usb_device_90c_1000_AA04012700012170_if0 removed 22:34:26.291: usb_device_90c_1000_AA04012700012170_usbraw removed 22:34:26.415: usb_device_90c_1000_AA04012700012170 removed The data gets lost. -- Package-specific info: ** Version: Linux version 2.6.26-2-686 (Debian 2.6.26-15) (da...@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu Mar 26 01:08:11 UTC 2009 ** Command line: root=/dev/mapper/hda9_crypt ro ** Tainted: P (1) ** Kernel log: [ 5.444902] uhci_hcd 0000:00:11.3: irq 10, io base 0x0000e000 [ 5.445092] usb usb5: configuration #1 chosen from 1 choice [ 5.445188] hub 5-0:1.0: USB hub found [ 5.445254] hub 5-0:1.0: 2 ports detected [ 5.548185] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.548249] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.548316] usb usb5: Product: UHCI Host Controller [ 5.548371] usb usb5: Manufacturer: Linux 2.6.26-2-686 uhci_hcd [ 5.548427] usb usb5: SerialNumber: 0000:00:11.3 [ 5.551279] 8139too Fast Ethernet driver 0.9.28 [ 5.551438] ACPI: PCI Interrupt 0000:00:11.4[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 [ 5.551598] uhci_hcd 0000:00:11.4: UHCI Host Controller [ 5.551713] uhci_hcd 0000:00:11.4: new USB bus registered, assigned bus number 6 [ 5.551809] uhci_hcd 0000:00:11.4: irq 10, io base 0x0000e400 [ 5.551998] usb usb6: configuration #1 chosen from 1 choice [ 5.552140] hub 6-0:1.0: USB hub found [ 5.552203] hub 6-0:1.0: 2 ports detected [ 5.656215] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.656282] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.656350] usb usb6: Product: UHCI Host Controller [ 5.656405] usb usb6: Manufacturer: Linux 2.6.26-2-686 uhci_hcd [ 5.656461] usb usb6: SerialNumber: 0000:00:11.4 [ 5.657602] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 [ 5.658420] eth0: RealTek RTL8139 at 0xd400, 00:c1:26:0a:fa:ec, IRQ 10 [ 5.658480] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 5.661997] No dock devices found. [ 5.672797] SCSI subsystem initialized [ 5.684579] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 5.684942] libata version 3.00 loaded. [ 5.738165] hda: max request size: 512KiB [ 5.784939] hda: 976773168 sectors (500107 MB) w/16384KiB Cache, CHS=60801/255/63 [ 5.809317] hda: cache flushes supported [ 5.809461] hda: hda1 hda2 < hda5 hda6<6>usb 4-1: configuration #1 chosen from 1 choice [ 5.876154] hda7<6>usb 4-1: New USB device found, idVendor=046d, idProduct=08da [ 5.877894] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.882913] hda8 hda9 > [ 5.893171] hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache [ 5.893466] Uniform CD-ROM driver Revision: 3.20 [ 5.906674] hdd: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache [ 6.377271] device-mapper: uevent: version 1.0.3 [ 6.377431] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-de...@redhat.com [ 12.263401] kjournald starting. Commit interval 5 seconds [ 12.263401] EXT3-fs: mounted filesystem with ordered data mode. [ 13.929478] udevd version 125 started [ 15.511988] Linux agpgart interface v0.103 [ 15.532363] agpgart: Detected VIA KT266/KY266x/KT333 chipset [ 15.540745] agpgart: AGP aperture is 128M @ 0xd0000000 [ 15.612454] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 15.627860] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.305997] NET: Registered protocol family 23 [ 16.310616] input: Power Button (FF) as /class/input/input1 [ 16.341170] ACPI: Power Button (FF) [PWRF] [ 16.341340] input: Power Button (CM) as /class/input/input2 [ 16.376147] ACPI: Power Button (CM) [PWRB] [ 16.376317] input: Sleep Button (CM) as /class/input/input3 [ 16.411976] ACPI: Sleep Button (CM) [SLPB] [ 17.682369] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 [ 17.798532] input: PC Speaker as /class/input/input4 [ 17.981351] Linux video capture interface: v2.00 [ 18.028134] gspca: USB GSPCA camera found.(ZC3XX) [ 18.028200] gspca: [spca5xx_probe:4275] Camera type JPEG [ 18.308323] gameport: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x201, speed 864kHz [ 18.681421] gspca: [zc3xx_config:669] Find Sensor HV7131R(c) [ 18.685427] gspca: [spca5xx_getcapability:1249] maxw 640 maxh 480 minw 160 minh 120 [ 18.685632] usbcore: registered new interface driver snd-usb-audio [ 18.693902] usbcore: registered new interface driver gspca [ 18.693971] gspca: gspca driver 01.00.20 registered [ 18.862797] input: ImPS/2 Logitech Wheel Mouse as /class/input/input5 [ 18.894836] parport_pc 00:09: reported by Plug and Play ACPI [ 18.894954] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 20.316457] EXT3 FS on dm-0, internal journal [ 20.597833] loop: module loaded [ 22.948613] fuse init (API version 7.9) [ 23.140639] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 23.199845] kjournald starting. Commit interval 5 seconds [ 23.200368] EXT3 FS on dm-1, internal journal [ 23.200465] EXT3-fs: mounted filesystem with ordered data mode. [ 23.235413] kjournald starting. Commit interval 5 seconds [ 23.235477] EXT3 FS on dm-2, internal journal [ 23.235477] EXT3-fs: mounted filesystem with ordered data mode. [ 24.766807] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 26.825833] NET: Registered protocol family 10 [ 26.826537] lo: Disabled Privacy Extensions [ 30.491249] lp0: using parport0 (interrupt-driven). [ 30.512804] ppdev: user-space parallel port driver [ 35.337920] gspca: [spca5xx_set_light_freq:1932] Sensor currently not support light frequency banding filters. [ 35.338101] gspca: [gspca_set_isoc_ep:945] ISO EndPoint found 0x81 AlternateSet 7 [ 37.488050] eth0: no IPv6 routers present [ 37.769195] cdrom: This disc doesn't have any tracks I recognize! [ 40.929156] nvidia: module license 'NVIDIA' taints kernel. [ 41.186362] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 41.186990] NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.07 Wed Jul 2 12:17:43 PDT 2008 [ 41.247046] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [ 41.247078] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [ 41.247136] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [ 50.756774] tun: Universal TUN/TAP device driver, 1.6 [ 50.756774] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com> [ 50.762858] tun0: Disabled Privacy Extensions [ 53.016030] eth0: no IPv6 routers present [ 68.270564] nepomukservices[3476]: segfault at 4 ip b7d88652 sp bff94610 error 4 in libQtCore.so.4.4.3[b7d35000+224000] ** Loaded modules: Module Size Used by tun 8292 1 nvidia 4701136 32 ppdev 6500 0 lp 8164 0 ipv6 235364 14 cpufreq_ondemand 6476 0 cpufreq_stats 3776 0 freq_table 4224 2 cpufreq_ondemand,cpufreq_stats cpufreq_conservative 5960 0 cpufreq_powersave 1856 0 cpufreq_userspace 3172 0 nls_utf8 1760 1 nls_cp437 5568 1 vfat 9184 1 fat 40896 1 vfat nls_base 6820 4 nls_utf8,nls_cp437,vfat,fat ext2 54504 1 fuse 42908 1 loop 12748 0 ns558 3712 0 parport_pc 22500 1 parport 30988 3 ppdev,lp,parport_pc psmouse 32336 0 serio_raw 4740 0 gspca 639568 0 videodev 27520 1 gspca v4l1_compat 12260 1 videodev snd_usb_audio 70304 1 snd_usb_lib 13440 1 snd_usb_audio pcspkr 2432 0 snd_cmipci 29024 1 gameport 10700 3 ns558,snd_cmipci snd_pcm_oss 32832 0 snd_mixer_oss 12320 1 snd_pcm_oss snd_pcm 62596 3 snd_usb_audio,snd_cmipci,snd_pcm_oss snd_page_alloc 7816 1 snd_pcm snd_opl3_lib 9344 1 snd_cmipci snd_hwdep 6212 2 snd_usb_audio,snd_opl3_lib snd_mpu401_uart 6368 1 snd_cmipci snd_seq_dummy 2660 0 i2c_viapro 6836 0 i2c_core 19828 2 nvidia,i2c_viapro snd_seq_oss 24992 0 snd_seq_midi 5728 0 snd_rawmidi 18528 3 snd_usb_lib,snd_mpu401_uart,snd_seq_midi via_ircc 15764 0 snd_seq_midi_event 6432 2 snd_seq_oss,snd_seq_midi snd_seq 41456 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event button 6096 0 irda 95512 1 via_ircc crc_ccitt 2080 1 irda snd_timer 17800 3 snd_pcm,snd_opl3_lib,snd_seq snd_seq_device 6380 6 snd_opl3_lib,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq snd 45604 17 snd_usb_audio,snd_cmipci,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_opl3_lib,snd_hwdep,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 6368 1 snd shpchp 25528 0 pci_hotplug 23460 1 shpchp via_agp 7744 1 agpgart 28776 2 nvidia,via_agp evdev 8000 4 ext3 105512 3 jbd 39444 1 ext3 mbcache 7108 2 ext2,ext3 sha256_generic 11360 0 aes_i586 7744 6 aes_generic 29256 1 aes_i586 cbc 3264 3 dm_crypt 11172 1 dm_mod 46184 7 dm_crypt crypto_blkcipher 15236 5 cbc,dm_crypt ide_cd_mod 27652 0 cdrom 30176 1 ide_cd_mod ide_disk 10496 6 ata_generic 4676 0 libata 140416 1 ata_generic scsi_mod 129324 1 libata dock 8304 1 libata ide_pci_generic 3908 0 [permanent] 8139too 20320 0 floppy 47748 0 uhci_hcd 18672 0 via82cxxx 6948 0 [permanent] ide_core 96136 4 ide_cd_mod,ide_disk,ide_pci_generic,via82cxxx 8139cp 16800 0 mii 4896 2 8139too,8139cp ehci_hcd 28396 0 ohci_hcd 18500 0 usbcore 118224 7 gspca,snd_usb_audio,snd_usb_lib,uhci_hcd,ehci_hcd,ohci_hcd thermal 15228 0 processor 32544 2 thermal fan 4164 0 thermal_sys 10856 3 thermal,processor,fan ** PCI devices: 00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333] [1106:3099] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M] Capabilities: <access denied> Kernel driver in use: agpgart-via Kernel modules: via-agp 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] [1106:b099] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: e0000000-e1ffffff Prefetchable memory behind bridge: d8000000-dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel modules: shpchp 00:09.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI]) Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (250ns min, 10500ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at e2000000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:09.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI]) Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (250ns min, 10500ns max), Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 5 Region 0: Memory at e2001000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:09.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20 [EHCI]) Subsystem: Device [1838:1074] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (4000ns min, 8500ns max), Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 10 Region 0: Memory at e2002000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:0b.0 Multimedia audio controller [0401]: C-Media Electronics Inc CM8738 [13f6:0111] (rev 10) Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device [13f6:0111] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 6000ns max) Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at d000 [size=256] Capabilities: <access denied> Kernel driver in use: C-Media PCI Kernel modules: snd-cmipci 00:0d.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Subsystem: Compex FN22-3(A) LinxPRO Ethernet Adapter [11f6:8139] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at d400 [size=256] Region 1: Memory at e2003000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: 8139too Kernel modules: 8139cp, 8139too 00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8233 PCI to ISA Bridge [1106:3074] Subsystem: VIA Technologies, Inc. VT8233 PCI to ISA Bridge [1106:3074] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: i2c-viapro, via-ircc 00:11.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE [1106:0571] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 11 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at d800 [size=16] Capabilities: <access denied> Kernel driver in use: VIA_IDE Kernel modules: via82cxxx 00:11.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 1b) (prog-if 00 [UHCI]) Subsystem: First International Computer, Inc. VA-502 Mainboard [0925:1234] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 10 Region 4: I/O ports at dc00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:11.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 1b) (prog-if 00 [UHCI]) Subsystem: First International Computer, Inc. VA-502 Mainboard [0925:1234] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 10 Region 4: I/O ports at e000 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:11.4 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 1b) (prog-if 00 [UHCI]) Subsystem: First International Computer, Inc. VA-502 Mainboard [0925:1234] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 10 Region 4: I/O ports at e400 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV25 [GeForce4 Ti 4200] [10de:0253] (rev a3) (prog-if 00 [VGA controller]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 248 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d8000000 (32-bit, prefetchable) [size=64M] Region 2: Memory at dc000000 (32-bit, prefetchable) [size=512K] [virtual] Expansion ROM at dc080000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb -- System Information: Debian Release: 5.0 APT prefers proposed-updates APT policy: (500, 'proposed-updates'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.26-2-686 (SMP w/1 CPU core) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.26-2-686 depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.26-2-686 recommends: ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.26-2-686 suggests: ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.26 <none> (no description available) -- debconf information: linux-image-2.6.26-2-686/postinst/bootloader-error-2.6.26-2-686: shared/kernel-image/really-run-bootloader: true linux-image-2.6.26-2-686/postinst/old-dir-initrd-link-2.6.26-2-686: true linux-image-2.6.26-2-686/preinst/overwriting-modules-2.6.26-2-686: true linux-image-2.6.26-2-686/postinst/bootloader-test-error-2.6.26-2-686: linux-image-2.6.26-2-686/postinst/depmod-error-2.6.26-2-686: false linux-image-2.6.26-2-686/preinst/bootloader-initrd-2.6.26-2-686: true linux-image-2.6.26-2-686/preinst/abort-overwrite-2.6.26-2-686: linux-image-2.6.26-2-686/preinst/abort-install-2.6.26-2-686: linux-image-2.6.26-2-686/postinst/depmod-error-initrd-2.6.26-2-686: false linux-image-2.6.26-2-686/postinst/create-kimage-link-2.6.26-2-686: true linux-image-2.6.26-2-686/preinst/failed-to-move-modules-2.6.26-2-686: linux-image-2.6.26-2-686/preinst/initrd-2.6.26-2-686: linux-image-2.6.26-2-686/preinst/lilo-has-ramdisk: linux-image-2.6.26-2-686/prerm/would-invalidate-boot-loader-2.6.26-2-686: true linux-image-2.6.26-2-686/postinst/kimage-is-a-directory: linux-image-2.6.26-2-686/postinst/old-initrd-link-2.6.26-2-686: true linux-image-2.6.26-2-686/preinst/elilo-initrd-2.6.26-2-686: true linux-image-2.6.26-2-686/preinst/lilo-initrd-2.6.26-2-686: true linux-image-2.6.26-2-686/prerm/removing-running-kernel-2.6.26-2-686: true linux-image-2.6.26-2-686/postinst/old-system-map-link-2.6.26-2-686: true -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
