Package: dhcp3 Version: N/A Severity: wishlist Tags: patch l10n Please find attached the french debconf templates update, proofread by the debian-l10n-french mailing list contributors.
If you do not already use it, please remember about the "podebconf-report-po" utility, which helps warning translators about changes when you modify some debconf templates in your packages. See its man page for details. The usual policy when using it is sending a warning to translators when you plan to upload a version of your package with debconf templates changes (EVEN TYPO CORRECTIONS). Then leave about one week for them to update their files (several translation teams have a QA process which requires time). podebconf-report-po will take care of sending the translators the needed material as well as getting the translators adresses from the PO files. All you have to do is just using the utility..:-) If you apply this policy, please forget about these remarks, of course....This message is generic..:-) -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.11-1-686 Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to fr_FR.UTF-8)
# translation of fr.po to French # # Translators, if you are not familiar with the PO format, gettext # documentation is worth reading, especially sections dedicated to # this format, e.g. by running: # info -n '(gettext)PO Files' # info -n '(gettext)Header Entry' # # Some information specific to po-debconf are available at # /usr/share/doc/po-debconf/README-trans # or http://www.debian.org/intl/l10n/po-debconf/README-trans # # Developers do not need to manually edit POT or PO files. # msgid "" msgstr "" "Project-Id-Version: fr\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2005-06-14 19:58+1000\n" "PO-Revision-Date: 2005-06-20 20:26+0200\n" "Last-Translator: Nicolas Bertolissio <[EMAIL PROTECTED]>\n" "Language-Team: French <debian-l10n-french@lists.debian.org>\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=ISO-8859-15\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.9.1\n" #. Type: string #. Description #: ../dhcp3-relay.templates:3 msgid "What DHCP servers should the DHCP relay forward requests to?" msgstr "Serveurs DHCP auxquels faire suivre les requêtes :" #. Type: string #. Description #: ../dhcp3-relay.templates:3 msgid "" "The name or IP address of at least one DHCP server to which DHCP and BOOTP " "requests should be relayed must be specified on the command line." msgstr "" "Veuillez indiquer le nom ou l'adresse IP d'au moins un serveur DHCP auquel " "faire suivre les requêtes DHCP et BOOTP." #. Type: string #. Description #: ../dhcp3-relay.templates:3 msgid "" "You can specify more than one server, just separate the server names (or IP " "addresses) with spaces." msgstr "" "Vous pouvez indiquer plus d'un serveur. Séparez simplement les noms (ou les " "adresses IP) des serveurs par des espaces." #. Type: string #. Description #: ../dhcp3-relay.templates:12 ../dhcp3-server.templates:13 msgid "On what network interfaces should the DHCP server listen?" msgstr "Interfaces réseau où le serveur DHCP sera à l'écoute :" #. Type: string #. Description #: ../dhcp3-relay.templates:12 msgid "" "The names of the network interfaces that dhcrelay should attempt to " "configure may be specified on the command line using the -i option. If no " "interface names are specified on the command line dhcrelay will identify " "all network interfaces, elimininating non-broadcast interfaces if possible, " "and attempt to configure each interface." msgstr "" "Les noms des interfaces réseau que dhcrelay doit configurer peuvent être " "indiqués sur la ligne de commande à l'aide de l'option « -i ». Si aucun nom " "d'interface n'est indiqué sur la ligne de commande, dhcrelay identifiera " "toutes les interfaces, conservera si possible celles de diffusion, et " "essayera de configurer chacune d'elles." #. Type: string #. Description #: ../dhcp3-relay.templates:21 msgid "Additional options for the Daemon?" msgstr "Options supplémentaires pour le démon :" #. Type: string #. Description #: ../dhcp3-relay.templates:21 msgid "Additional options for the DHCP relay daemon." msgstr "" "Vous pouvez ajouter des options supplémentaires pour le démon de relais DHCP." #. Type: string #. Description #: ../dhcp3-relay.templates:21 msgid "Example: \"-m replace\" or \"-a -D\"" msgstr "Par exemple : « -m replace » ou « -a -D »." #. Type: note #. Description #: ../dhcp3-server.templates:3 msgid "The DHCP server requires manual configuration after installation!!!" msgstr "Configuration du serveur DHCP requise après l'installation" #. Type: note #. Description #: ../dhcp3-server.templates:3 msgid "" "After the DHCP server is installed you will need to manually configure it " "by editing the file /etc/dhcp3/dhcpd.conf. Please note that a sample dhcpd." "conf is supplied, but the configuration there is just a sample that requires " "editing and customization to your own network environment." msgstr "" "Après l'installation du serveur DHCP, vous devrez le configurer vous-même en " "modifiant le fichier /etc/dhcp3/dhcpd.conf. Veuillez noter qu'un exemple de " "fichier dhcpd.conf est fourni, mais que cette configuration est partielle et " "qu'elledoit être adaptée à votre environnement réseau." #. Type: note #. Description #: ../dhcp3-server.templates:3 msgid "Please configure the DHCP server as soon as the installation finishes." msgstr "Veuillez configurer le serveur DHCP dès la fin de l'installation." #. Type: string #. Description #: ../dhcp3-server.templates:13 msgid "" "You can enter one or more valid interface names, like eth0. If you want to " "serve DHCP request on more than one interface, please separate them with " "spaces. If you want dhcpd to figure out the interface leave this parameter " "blank." msgstr "" "Vous pouvez indiquer un ou plusieurs noms d'interfaces valides, comme eth0. " "Si vous souhaitez servir des requêtes DHCP sur plus d'une interface, " "veuillez les séparer par des espaces. Si vous souhaitez que dhcpd trouve " "seul l'interface, veuillez laisser ce paramètre vide." #. Type: note #. Description #: ../dhcp3-server.templates:21 msgid "The version 3 DHCP server is now non-authoritative by default" msgstr "Par défaut, le serveur DHCP version 3 ne fait plus autorité" #. Type: note #. Description #: ../dhcp3-server.templates:21 msgid "" "This means that if a client requests an address that the server knows " "nothing about and the address is incorrect for that network segment, the " "server will _not_ send a DHCPNAK (which tells the client it should stop " "using the address.) If you want to change this behavior, you must explicitly " "state in dhcpd.conf what network segments your server is authoritative for " "using the 'authoritative' statement." msgstr "" "Cela signifie que si un client demande une adresse inconnue du serveur et " "que celle-ci est incorrecte pour le segment de réseau considéré, le serveur " "n'enverra _pas_ de message DHCPNAK (pour demander au client de ne pas " "utiliser cette adresse). Si vous souhaitez modifier ce comportement, vous " "devez indiquer explicitement dans dhcpd.conf les segments de réseau pour " "lesquels votre serveur fait autorité en utilisant l'assertion " "« authoritative »."
