On Fri, 20 Mar 2009 02:36:12 pm Cyril Brulebois wrote:
> Hello,
>
> looking at the soon-to-be-uploaded (a few hours) 2.4.4-1 package, the
> following IDs are known:
> | ./camlibs/sierra/sierra.c: {"Olympus", "SP-500UZ",
> SIERRA_MODEL_CAM_DESC, 0x07b4, 0x109,
> | ./camlibs/sierra/sierra.c: {"Olympus", "C-370Z", SIERRA_MODEL_CAM_DESC,
> 0x07b4, 0x109,
> | ./camlibs/sierra/sierra.c: {"Olympus", "X-450", SIERRA_MODEL_CAM_DESC,
> 0x07b4, 0x109,
> | ./camlibs/sierra/sierra.c: {"Olympus", "D-535Z", SIERRA_MODEL_CAM_DESC,
> 0x07b4, 0x109,
> | ./camlibs/sierra/sierra.c: {"Olympus", "fe-200", SIERRA_MODEL_CAM_DESC,
> 0x07b4, 0x109,
>
> Furthermore, one can see (./packaging/generic/print-camera-list.c):
> | if (a->usb_vendor == 0x07b4 && (a->usb_product == 0x105 ||
> a->usb_product == 0x109) ) {
> | /* Marcus says: The Olympus Sierra/Storage dual
> mode camera firmware.
> | * Some HAL using software gets deeply confused by
> this being here
> | * and also detected as mass storage elsewhere, so
> blacklist
> | * it here.
> | */
> | return 0;
>
> So I'd think this bug might be fixed. If you can't wait for 2.4.4-1 in
> unstable, you could give a try with 2.4.3-1 (in experimental).
>
> If your problem still isn't fixed, we'll try and debug that together.
>
> Thanks for your time.
>
> Mraw,
> KiBi.
>
This problem seems to be limited to Etch, the camera connects perfectly in
Lenny.
Andy
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
