Package: linux-image-2.6.26-1-686
Version: 2.6.26-13
Followup-For: Bug #462229
While doing disk rights I can achieve the following
Feb 7 20:51:46 thor kernel: [ 1303.442451] sd 1:0:0:0: [sda] 1953523055
512-byte hardware sectors (1000204 MB)
Feb 7 20:51:46 thor kernel: [ 1303.442451] sd 1:0:0:0: [sda] Write Protect is
off
Feb 7 20:51:46 thor kernel: [ 1303.442451] sd 1:0:0:0: [sda] Mode Sense: 00 3a
00 00
Feb 7 20:51:46 thor kernel: [ 1303.442451] sd 1:0:0:0: [sda] Write cache:
disabled, read cache: enabled, doesn't support DPO or FUA
Feb 7 21:01:54 thor smartd[2596]: Device: /dev/sda, SMART Usage Attribute: 194
Temperature_Celsius changed from 127 to 119
Feb 7 21:07:58 thor kernel: [ 2327.706181] ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x6 frozen
Feb 7 21:07:58 thor kernel: [ 2327.706198] ata2.00: cmd
35/00:e0:5f:68:6b/00:03:03:00:00/e0 tag 0 dma 507904 out
Feb 7 21:07:58 thor kernel: [ 2327.706203] res
40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
Feb 7 21:07:58 thor kernel: [ 2327.706208] ata2.00: status: { DRDY }
Feb 7 21:07:58 thor kernel: [ 2327.706227] ata2: soft resetting link
Feb 7 21:07:58 thor kernel: [ 2328.346026] ata2.00: configured for UDMA/133
Feb 7 21:07:58 thor kernel: [ 2328.346026] ata2: EH complete
Feb 7 21:07:58 thor kernel: [ 2328.352930] sd 1:0:0:0: [sda] 1953523055
512-byte hardware sectors (1000204 MB)
Feb 7 21:07:58 thor kernel: [ 2328.361407] sd 1:0:0:0: [sda] Write Protect is
off
Feb 7 21:07:58 thor kernel: [ 2328.361414] Feb 7 21:16:32 thor kernel: [
2894.903319] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action
0x6 frozen
Feb 7 21:16:32 thor kernel: [ 2894.903336] ata2.00: cmd
c8/00:08:0f:44:f4/00:00:00:00:00/e0 tag 0 dma 4096 in
Feb 7 21:16:32 thor kernel: [ 2894.903340] res
40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
Feb 7 21:16:32 thor kernel: [ 2894.903346] ata2.00: status: { DRDY }
Feb 7 21:16:32 thor kernel: [ 2894.903364] ata2: soft resetting link
Feb 7 21:16:32 thor kernel: [ 2895.679600] ata2.00: configured for UDMA/133
Feb 7 21:16:32 thor kernel: [ 2895.679600] ata2: EH complete
Feb 7 21:16:32 thor kernel: [ 2895.691278] sd 1:0:0:0: [sda] 1953523055
512-byte hardware sectors (1000204 MB)
Feb 7 21:16:32 thor kernel: [ 2895.691278] sd 1:0:0:0: [sda] Write Protect is
off
Feb 7 21:16:32 thor kernel: [ 2895.691278] sd 1:0:0:0: [sda] Mode Sense: 00 3a
00 00
Feb 7 21:16:32 thor kernel: [ 2895.691278] sd 1:0:0:0: [sda] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Feb 7 21:17:03 thor kernel: [ 2927.477266] ata2.00: limiting speed to
UDMA/100:PIO4
Feb 7 21:17:03 thor kernel: [ 2927.477277] ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x6 frozen
Feb 7 21:17:03 thor kernel: [ 2927.477289] ata2.00: cmd
ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
Feb 7 21:17:03 thor kernel: [ 2927.477293] res
40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
Feb 7 21:17:03 thor kernel: [ 2927.477298] ata2.00: status: { DRDY }
Feb 7 21:17:03 thor kernel: [ 2927.477316] ata2: soft resetting link
Feb 7 21:17:03 thor kernel: [ 2928.141432] ata2.00: configured for UDMA/100
Feb 7 21:17:03 thor kernel: [ 2928.141432] ata2: EH complete
Feb 7 21:17:03 thor kernel: [ 2928.141432] sd 1:0:0:0: [sda] 1953523055
512-byte hardware sectors (1000204 MB)
Feb 7 21:17:04 thor kernel: [ 2928.184455] end_request: I/O error, dev sda,
sector 1953519935
Feb 7 21:17:04 thor kernel: [ 2928.184455] md: super_written gets error=-5,
uptodate=0
Feb 7 21:17:04 thor kernel: [ 2928.184455] sd 1:0:0:0: [sda] Write Protect is
off
Feb 7 21:17:04 thor kernel: [ 2928.184455] sd 1:0:0:0: [sda] Mode Sense: 00 3a
00 00
Feb 7 21:17:04 thor kernel: [ 2928.208441] sd 1:0:0:0: [sda] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Feb 7 21:17:04 thor /USR/SBIN/CRON[3557]: (root) CMD ( cd / && run-parts
--report /etc/cron.hourly)
It is consistent across all disks, all ports, all cables. I have been seeing
this issue since june/july and it has cost me significant data
loss and forced 3 reinstalls as the OS has been terminally damaged.
I have tried turning write cache off as it has been mentioned as a pottential
fix this has not worked.
Currently effecting 2 brand new wd 1 tb green drives.
Ben
-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-13) (wa...@debian.org) (gcc version
4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC
2009
** Command line:
auto BOOT_IMAGE=Linux ro root=fd02
** Not tainted
** Kernel log:
[ 12.886269] EXT3 FS on dm-0, internal journal
[ 12.886269] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.917203] kjournald starting. Commit interval 5 seconds
[ 12.920531] EXT3 FS on dm-1, internal journal
[ 12.920611] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.990647] JFS: nTxBlock = 8192, nTxLock = 65536
[ 13.243449] Adding 5857272k swap on /dev/mapper/thor-swap. Priority:-1
extents:1 across:5857272k
[ 14.449984] skge eth0: enabling interface
[ 15.481909] NET: Registered protocol family 10
[ 15.482537] lo: Disabled Privacy Extensions
[ 15.487040] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.081349] lp0: using parport0 (interrupt-driven).
[ 16.102364] ppdev: user-space parallel port driver
[ 16.656926] skge eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 16.656987] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 23.456817] [drm] Initialized drm 1.1.0 20060810
[ 23.461630] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 23.461630] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 23.461630] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 28.260270] eth0: no IPv6 routers present
[ 1270.041817] usb 5-5: new high speed USB device using ehci_hcd and address 4
[ 1270.231367] usb 5-5: configuration #1 chosen from 1 choice
[ 1270.231367] usb 5-5: New USB device found, idVendor=07ff, idProduct=00ff
[ 1270.231367] usb 5-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1270.231367] usb 5-5: Product: uPD720133
[ 1270.231367] usb 5-5: Manufacturer: NEC Electronics
[ 1270.231367] usb 5-5: SerialNumber: 123456789012
[ 1270.306820] Initializing USB Mass Storage driver...
[ 1270.306820] scsi2 : SCSI emulation for USB Mass Storage devices
[ 1270.310765] usbcore: registered new interface driver usb-storage
[ 1270.310765] USB Mass Storage support registered.
[ 1270.323221] usb-storage: device found at 4
[ 1270.323231] usb-storage: waiting for device to settle before scanning
[ 1275.446764] usb-storage: device scan complete
[ 1275.448400] scsi 2:0:0:0: Direct-Access SEAGATE ST3200822A 3.01
PQ: 0 ANSI: 2
[ 1275.451280] sd 2:0:0:0: [sdb] 390718944 512-byte hardware sectors (200048 MB)
[ 1275.451280] sd 2:0:0:0: [sdb] Write Protect is off
[ 1275.451280] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[ 1275.451280] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1275.453922] sd 2:0:0:0: [sdb] 390718944 512-byte hardware sectors (200048 MB)
[ 1275.455273] sd 2:0:0:0: [sdb] Write Protect is off
[ 1275.455273] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[ 1275.455273] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1275.455273] sdb: sdb1
[ 1275.471262] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1303.439505] ata2.00: configured for UDMA/133
[ 1303.439505] ata2: EH complete
[ 1303.442451] sd 1:0:0:0: [sda] 1953523055 512-byte hardware sectors (1000204
MB)
[ 1303.442451] sd 1:0:0:0: [sda] Write Protect is off
[ 1303.442451] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1303.442451] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 2327.706181] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2327.706198] ata2.00: cmd 35/00:e0:5f:68:6b/00:03:03:00:00/e0 tag 0 dma
507904 out
[ 2327.706203] res 40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4
(timeout)
[ 2327.706208] ata2.00: status: { DRDY }
[ 2327.706227] ata2: soft resetting link
[ 2328.346026] ata2.00: configured for UDMA/133
[ 2328.346026] ata2: EH complete
[ 2328.352930] sd 1:0:0:0: [sda] 1953523055 512-byte hardware sectors (1000204
MB)
[ 2328.361407] sd 1:0:0:0: [sda] Write Protect is off
[ 2328.361414] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2328.382670] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2449.143151] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2449.143166] ata2.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 2449.143169] res 40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4
(timeout)
[ 2449.143176] ata2.00: status: { DRDY }
[ 2449.143194] ata2: soft resetting link
[ 2449.682515] ata2.00: configured for UDMA/133
[ 2449.682515] ata2: EH complete
[ 2449.682515] sd 1:0:0:0: [sda] 1953523055 512-byte hardware sectors (1000204
MB)
[ 2449.710516] end_request: I/O error, dev sda, sector 1953519935
[ 2449.710516] md: super_written gets error=-5, uptodate=0
[ 2449.710516] sd 1:0:0:0: [sda] Write Protect is off
[ 2449.710516] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2449.710516] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2894.903319] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2894.903336] ata2.00: cmd c8/00:08:0f:44:f4/00:00:00:00:00/e0 tag 0 dma 4096
in
[ 2894.903340] res 40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4
(timeout)
[ 2894.903346] ata2.00: status: { DRDY }
[ 2894.903364] ata2: soft resetting link
[ 2895.679600] ata2.00: configured for UDMA/133
[ 2895.679600] ata2: EH complete
[ 2895.691278] sd 1:0:0:0: [sda] 1953523055 512-byte hardware sectors (1000204
MB)
[ 2895.691278] sd 1:0:0:0: [sda] Write Protect is off
[ 2895.691278] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2895.691278] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2927.477266] ata2.00: limiting speed to UDMA/100:PIO4
[ 2927.477277] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2927.477289] ata2.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 2927.477293] res 40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4
(timeout)
[ 2927.477298] ata2.00: status: { DRDY }
[ 2927.477316] ata2: soft resetting link
[ 2928.141432] ata2.00: configured for UDMA/100
[ 2928.141432] ata2: EH complete
[ 2928.141432] sd 1:0:0:0: [sda] 1953523055 512-byte hardware sectors (1000204
MB)
[ 2928.184455] end_request: I/O error, dev sda, sector 1953519935
[ 2928.184455] md: super_written gets error=-5, uptodate=0
[ 2928.184455] sd 1:0:0:0: [sda] Write Protect is off
[ 2928.184455] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2928.208441] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
** Loaded modules:
Module Size Used by
nls_utf8 1760 1
nls_cp437 5568 1
vfat 9152 1
fat 40864 1 vfat
usb_storage 76032 1
i915 25280 2
drm 65256 3 i915
ppdev 6468 0
lp 8164 0
ipv6 235300 22
jfs 148812 2
nls_base 6820 5 nls_utf8,nls_cp437,vfat,fat,jfs
loop 12748 0
parport_pc 22500 1
snd_cmipci 28992 0
parport 30988 3 ppdev,lp,parport_pc
psmouse 32336 0
gameport 10700 1 snd_cmipci
serio_raw 4740 0
snd_pcm_oss 32800 0
snd_mixer_oss 12320 1 snd_pcm_oss
i2c_i801 7920 0
i2c_core 19828 1 i2c_i801
snd_pcm 62596 2 snd_cmipci,snd_pcm_oss
snd_page_alloc 7816 1 snd_pcm
snd_opl3_lib 9344 1 snd_cmipci
snd_timer 17800 2 snd_pcm,snd_opl3_lib
snd_hwdep 6212 1 snd_opl3_lib
snd_mpu401_uart 6368 1 snd_cmipci
pcspkr 2432 0
snd_rawmidi 18496 1 snd_mpu401_uart
snd_seq_device 6380 2 snd_opl3_lib,snd_rawmidi
snd 45604 10
snd_cmipci,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_opl3_lib,snd_timer,snd_hwdep,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 6368 1 snd
rng_core 3940 0
iTCO_wdt 9508 0
button 6096 0
shpchp 25528 0
pci_hotplug 23460 1 shpchp
intel_agp 22332 1
agpgart 28776 3 drm,intel_agp
evdev 8000 3
ext3 105512 3
jbd 39444 1 ext3
mbcache 7108 1 ext3
dm_mirror 15104 0
dm_log 8452 1 dm_mirror
dm_snapshot 14340 0
dm_mod 46184 17 dm_mirror,dm_log,dm_snapshot
raid1 18016 1
md_mod 67036 2 raid1
sd_mod 22200 4
ide_cd_mod 27652 0
cdrom 30176 1 ide_cd_mod
ide_pci_generic 3908 0 [permanent]
ata_piix 14180 1
piix 6568 0 [permanent]
ide_core 96168 3 ide_cd_mod,ide_pci_generic,piix
floppy 47716 0
skge 33360 0
ata_generic 4676 0
libata 140384 2 ata_piix,ata_generic
scsi_mod 129356 3 usb_storage,sd_mod,libata
dock 8304 1 libata
ehci_hcd 28428 0
uhci_hcd 18672 0
usbcore 118160 4 usb_storage,ehci_hcd,uhci_hcd
thermal 15228 0
processor 32576 1 thermal
fan 4164 0
thermal_sys 10856 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM
Controller/Host-Hub Interface [8086:2570] (rev 02)
Subsystem: Giga-byte Technology GA-8IPE1000 Pro2 motherboard (865PE)
[1458:2570]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation 82865G Integrated
Graphics Controller [8086:2572] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device [1458:2572]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at fa000000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at c000 [size=8]
Capabilities: <access denied>
Kernel modules: intelfb
00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-8IPE1000/8KNXP motherboard
[1458:24d2]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at b000 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-8IPE1000 Pro2 motherboard (865PE)
[1458:24d2]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at b400 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-8IPE1000 Pro2 motherboard (865PE)
[1458:24d2]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at b800 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB
UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-8IPE1000 Pro2 motherboard (865PE)
[1458:24d2]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at bc00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2
EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology GA-8IPE1000 Pro2 motherboard (865PE)
[1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at fa080000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: c0000000-c00fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC
Interface Bridge [8086:24d0] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: intel-rng, iTCO_wdt
00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE
Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Giga-byte Technology GA-8IPE1000 Pro2 motherboard (865PE)
[1458:24d2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f000 [size=16]
Region 5: Memory at c0100000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller
[8086:24d1] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Giga-byte Technology GA-8IPE1000 Pro2 motherboard (865PE)
[1458:24d1]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at c400 [size=8]
Region 1: I/O ports at c800 [size=4]
Region 2: I/O ports at cc00 [size=8]
Region 3: I/O ports at d000 [size=4]
Region 4: I/O ports at d400 [size=16]
Kernel driver in use: ata_piix
Kernel modules: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus
Controller [8086:24d3] (rev 02)
Subsystem: Giga-byte Technology GA-8IPE1000 Pro2 motherboard (865PE)
[1458:24d2]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 1400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
01:00.0 Multimedia audio controller [0401]: C-Media Electronics Inc CM8738
[13f6:0111] (rev 10)
Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device
[13f6:0111]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at a000 [size=256]
Capabilities: <access denied>
Kernel driver in use: C-Media PCI
Kernel modules: snd-cmipci
01:09.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001
Gigabit Ethernet Controller [11ab:4320] (rev 13)
Subsystem: Giga-byte Technology Marvell 88E8001 Gigabit Ethernet
Controller (Gigabyte) [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at f9000000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at a400 [size=256]
[virtual] Expansion ROM at c0000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: skge
Kernel modules: skge
-- System Information:
Debian Release: 5.0
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-1-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-1-686 suggests:
ii lilo 1:22.8-7 LInux LOader - The Classic OS load
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-686/preinst/abort-overwrite-2.6.26-1-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-686/postinst/bootloader-error-2.6.26-1-686:
linux-image-2.6.26-1-686/postinst/depmod-error-initrd-2.6.26-1-686: false
linux-image-2.6.26-1-686/prerm/removing-running-kernel-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-system-map-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/abort-install-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-686/preinst/bootloader-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/prerm/would-invalidate-boot-loader-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/elilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-686/postinst/old-dir-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/create-kimage-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/lilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/overwriting-modules-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/depmod-error-2.6.26-1-686: false
linux-image-2.6.26-1-686/postinst/bootloader-test-error-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/failed-to-move-modules-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/initrd-2.6.26-1-686:
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
