Subject: linux-image-2.6.26-1-powerpc64: Multiple bonding devices aren't
configured
Package: linux-image-2.6.26-1-powerpc64
Version: 2.6.26-13
Severity: normal
*** Please type your report below this line ***
Hello,
with the following configuration (resolution from BugID: 439007) only
the first ethernet bonding device (bond0) of several gets configured:
# cat /etc/modprobe.d/aliases
[...]
alias bond0 bonding
options bond0 mode=active-backup miimon=100 downdelay=200 updelay=200
max_bonds=4
alias bond1 bonding
options bond1 mode=active-backup miimon=100 downdelay=200 updelay=200
alias bond2 bonding
options bond2 mode=active-backup miimon=100 downdelay=200 updelay=200
alias bond3 bonding
options bond3 mode=active-backup miimon=100 downdelay=200 updelay=200
# lsmod | grep bond
bonding 123512 0
All other devices (bond1, bond2, bond3) are ignored. If manually configured
with:
# modprobe -o bond1 bonding mode=active-backup miimon=100 downdelay=200
updelay=200
# modprobe -o bond2 bonding mode=active-backup miimon=100 downdelay=200
updelay=200
# modprobe -o bond3 bonding mode=active-backup miimon=100 downdelay=200
updelay=200
# lsmod | grep bond
bonding 123512 0
bond1 123512 0
bond2 123512 0
bond3 123512 0
the additional bonding interfaces work fine. So i guess the problem is
with parsing the config files or passing the options (e.g. "-o") to the
init-tools.
If not the above, what would be the correct way to configure multiple
bonding interfaces?
Regards,
Frank
-- Package-specific info:
** Version:
Linux version 2.6.26-1-powerpc64 (Debian 2.6.26-13) (wa...@debian.org) (gcc
version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10
14:42:07 CET 2009
** Command line:
root=/dev/mapper/mpath0-part2 ro
** Not tainted
** Kernel log:
[ 1.307486] io scheduler deadline registered
[ 1.307538] io scheduler cfq registered (default)
[ 1.315074] vio_register_driver: driver hvc_console registering
[ 1.315964] HVSI: registered 0 devices
[ 1.315973] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
disabled
[ 1.316640] pmac_zilog: 0.6 (Benjamin Herrenschmidt
<b...@kernel.crashing.org>)
[ 1.320235] brd: module loaded
[ 1.320498] input: Macintosh mouse button emulation as /class/input/input0
[ 1.320632] Uniform Multi-Platform E-IDE driver
[ 1.320642] ide: Assuming 50MHz system bus speed for PIO modes; override
with idebus=xx
[ 1.321079] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI)
Driver
[ 1.345095] mice: PS/2 mouse device common for all mice
[ 1.345407] platform ppc-rtc.0: rtc core: registered ppc_md as rtc0
[ 1.346272] TCP cubic registered
[ 1.346282] NET: Registered protocol family 17
[ 1.346614] registered taskstats version 1
[ 1.346760] platform ppc-rtc.0: setting system clock to 2009-01-16 14:57:19
UTC (1232117839)
[ 1.346846] Freeing unused kernel memory: 296k freed
[ 1.978123] SCSI subsystem initialized
[ 2.014627] vio_register_driver: driver ibmvscsi registering
[ 2.014737] ibmvscsi 30000002: SRP_VERSION: 16.a
[ 2.014859] scsi0 : IBM POWER Virtual SCSI Adapter 1.5.8
[ 2.015099] ibmvscsi 30000002: partner initialization complete
[ 2.015116] ibmvscsi 30000002: sent SRP login
[ 2.015189] ibmvscsi 30000002: SRP_LOGIN succeeded
[ 2.015242] ibmvscsi 30000002: host srp version: 16.a, host partition 01 -
s6521 - VIOS1 (1), OS 3, max io 262144
[ 2.033414] ibmvscsi 30000003: SRP_VERSION: 16.a
[ 2.033537] scsi1 : IBM POWER Virtual SCSI Adapter 1.5.8
[ 2.033696] ibmvscsi 30000003: partner initialization complete
[ 2.033707] ibmvscsi 30000003: sent SRP login
[ 2.033783] ibmvscsi 30000003: SRP_LOGIN succeeded
[ 2.033839] ibmvscsi 30000003: host srp version: 16.a, host partition 02 -
s6522 - VIOS2 (2), OS 3, max io 262144
[ 2.034584] scsi 0:0:2:0: Direct-Access AIX VDASD 0001
PQ: 0 ANSI: 3
[ 2.034808] scsi 0:0:3:0: CD-ROM AIX VOPTA
PQ: 0 ANSI: 4
[ 2.050417] scsi 1:0:1:0: Direct-Access AIX VDASD 0001
PQ: 0 ANSI: 3
[ 2.123896] Driver 'sd' needs updating - please use bus_type methods
[ 2.124145] sd 0:0:2:0: [sda] 75497472 512-byte hardware sectors (38655 MB)
[ 2.124230] sd 0:0:2:0: [sda] Write Protect is off
[ 2.124239] sd 0:0:2:0: [sda] Mode Sense: 2f 00 00 08
[ 2.124318] sd 0:0:2:0: [sda] Cache data unavailable
[ 2.124328] sd 0:0:2:0: [sda] Assuming drive cache: write through
[ 2.124488] sd 0:0:2:0: [sda] 75497472 512-byte hardware sectors (38655 MB)
[ 2.124543] sd 0:0:2:0: [sda] Write Protect is off
[ 2.124553] sd 0:0:2:0: [sda] Mode Sense: 2f 00 00 08
[ 2.124604] sd 0:0:2:0: [sda] Cache data unavailable
[ 2.124614] sd 0:0:2:0: [sda] Assuming drive cache: write through
[ 2.124625] sda: sda1 sda2 sda3
[ 2.125104] sd 0:0:2:0: [sda] Attached SCSI disk
[ 2.125298] sd 1:0:1:0: [sdb] 75497472 512-byte hardware sectors (38655 MB)
[ 2.125366] sd 1:0:1:0: [sdb] Write Protect is off
[ 2.125376] sd 1:0:1:0: [sdb] Mode Sense: 2f 00 00 08
[ 2.125435] sd 1:0:1:0: [sdb] Cache data unavailable
[ 2.125445] sd 1:0:1:0: [sdb] Assuming drive cache: write through
[ 2.125605] sd 1:0:1:0: [sdb] 75497472 512-byte hardware sectors (38655 MB)
[ 2.125670] sd 1:0:1:0: [sdb] Write Protect is off
[ 2.125681] sd 1:0:1:0: [sdb] Mode Sense: 2f 00 00 08
[ 2.125742] sd 1:0:1:0: [sdb] Cache data unavailable
[ 2.125752] sd 1:0:1:0: [sdb] Assuming drive cache: write through
[ 2.125761] sdb: sdb1 sdb2 sdb3
[ 2.126371] sd 1:0:1:0: [sdb] Attached SCSI disk
[ 2.163465] Driver 'sr' needs updating - please use bus_type methods
[ 2.163629] sr0: scsi-1 drive
[ 2.163638] Uniform CD-ROM driver Revision: 3.20
[ 2.163747] sr 0:0:3:0: Attached scsi CD-ROM sr0
[ 2.190383] sd 0:0:2:0: Attached scsi generic sg0 type 0
[ 2.190437] sr 0:0:3:0: Attached scsi generic sg1 type 5
[ 2.190485] sd 1:0:1:0: Attached scsi generic sg2 type 0
[ 2.318294] device-mapper: uevent: version 1.0.3
[ 2.318433] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised:
dm-de...@redhat.com
[ 2.320975] device-mapper: multipath: version 1.0.5 loaded
[ 2.328330] device-mapper: multipath emc: version 0.0.3 loaded
[ 2.349172] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.962360] PM: Starting manual resume from disk
[ 2.988184] kjournald starting. Commit interval 5 seconds
[ 2.988216] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.637703] udevd version 125 started
[ 9.453490] drivers/net/ibmveth.c: ibmveth: IBM i/pSeries Virtual Ethernet
Driver 1.03
[ 9.453509] vio_register_driver: driver ibmveth registering
[ 13.582353] EXT3 FS on dm-2, internal journal
[ 14.654187] loop: module loaded
[ 14.722173] Ethernet Channel Bonding Driver: v3.2.5 (March 21, 2008)
[ 14.722190] bonding: Warning: either miimon or arp_interval and
arp_ip_target module parameters must be specified, otherwise bonding will not
detect link failures! see bonding.txt for details.
[ 23.372917] kjournald starting. Commit interval 5 seconds
[ 23.373378] EXT3 FS on dm-6, internal journal
[ 23.373390] EXT3-fs: mounted filesystem with ordered data mode.
[ 23.375666] kjournald starting. Commit interval 5 seconds
[ 23.376075] EXT3 FS on dm-9, internal journal
[ 23.376086] EXT3-fs: mounted filesystem with ordered data mode.
[ 23.377523] kjournald starting. Commit interval 5 seconds
[ 23.377917] EXT3 FS on dm-5, internal journal
[ 23.377928] EXT3-fs: mounted filesystem with ordered data mode.
[ 23.379399] kjournald starting. Commit interval 5 seconds
[ 23.379761] EXT3 FS on dm-8, internal journal
[ 23.379771] EXT3-fs: mounted filesystem with ordered data mode.
[ 23.381611] kjournald starting. Commit interval 5 seconds
[ 23.382131] EXT3 FS on dm-7, internal journal
[ 23.382141] EXT3-fs: mounted filesystem with ordered data mode.
[ 24.075804] Adding 499704k swap on /dev/mapper/vg00-swap_1. Priority:-1
extents:1 across:499704k
[ 24.996062] bonding: bond0: enslaving eth0 as an active interface with an up
link.
[ 25.007952] bonding: bond0: enslaving eth1 as an active interface with an up
link.
** Loaded modules:
Module Size Used by
bonding 123512 0
loop 28412 0
atkbd 29352 0
serio 27336 1 atkbd
libps2 13992 1 atkbd
ibmveth 31008 0
evdev 20864 0
ext3 187856 6
jbd 79760 1 ext3
mbcache 17012 1 ext3
dm_mirror 29880 0
dm_log 20372 1 dm_mirror
dm_snapshot 31024 0
dm_round_robin 9176 1
dm_emc 11648 0
dm_multipath 31816 3 dm_round_robin,dm_emc
dm_mod 95016 25 dm_mirror,dm_log,dm_snapshot,dm_multipath
sg 52592 0
sr_mod 28588 0
cdrom 50440 1 sr_mod
sd_mod 39016 2
ibmvscsic 38168 4
scsi_transport_srp 14864 1 ibmvscsic
scsi_tgt 25216 1 scsi_transport_srp
scsi_mod 227432 6
sg,sr_mod,sd_mod,ibmvscsic,scsi_transport_srp,scsi_tgt
windfarm_pid 8304 0
windfarm_smu_sat 12856 0 [permanent]
windfarm_max6690_sensor 10160 0
windfarm_lm75_sensor 10840 0
windfarm_cpufreq_clamp 8352 0
windfarm_core 21224 4
windfarm_smu_sat,windfarm_max6690_sensor,windfarm_lm75_sensor,windfarm_cpufreq_clamp
i2c_powermac 10896 0
** PCI devices:
** Sound cards:
-- System Information:
Debian Release: 5.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: powerpc (ppc64)
Kernel: Linux 2.6.26-1-powerpc64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-powerpc64 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.26-1-powerpc64 recommends no packages.
Versions of packages linux-image-2.6.26-1-powerpc64 suggests:
pn linux-doc-2.6.26 <none> (no description available)
pn mkvmlinuz <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-powerpc64/preinst/overwriting-modules-2.6.26-1-powerpc64:
true
linux-image-2.6.26-1-powerpc64/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-powerpc64/postinst/bootloader-test-error-2.6.26-1-powerpc64:
linux-image-2.6.26-1-powerpc64/postinst/depmod-error-2.6.26-1-powerpc64: false
linux-image-2.6.26-1-powerpc64/preinst/initrd-2.6.26-1-powerpc64:
linux-image-2.6.26-1-powerpc64/preinst/lilo-initrd-2.6.26-1-powerpc64: true
linux-image-2.6.26-1-powerpc64/preinst/abort-overwrite-2.6.26-1-powerpc64:
linux-image-2.6.26-1-powerpc64/postinst/old-system-map-link-2.6.26-1-powerpc64:
true
linux-image-2.6.26-1-powerpc64/preinst/failed-to-move-modules-2.6.26-1-powerpc64:
linux-image-2.6.26-1-powerpc64/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-powerpc64/preinst/abort-install-2.6.26-1-powerpc64:
linux-image-2.6.26-1-powerpc64/postinst/old-initrd-link-2.6.26-1-powerpc64:
true
linux-image-2.6.26-1-powerpc64/prerm/removing-running-kernel-2.6.26-1-powerpc64:
true
linux-image-2.6.26-1-powerpc64/preinst/bootloader-initrd-2.6.26-1-powerpc64:
true
linux-image-2.6.26-1-powerpc64/postinst/create-kimage-link-2.6.26-1-powerpc64:
true
linux-image-2.6.26-1-powerpc64/postinst/depmod-error-initrd-2.6.26-1-powerpc64:
false
linux-image-2.6.26-1-powerpc64/preinst/elilo-initrd-2.6.26-1-powerpc64: true
linux-image-2.6.26-1-powerpc64/postinst/bootloader-error-2.6.26-1-powerpc64:
linux-image-2.6.26-1-powerpc64/postinst/old-dir-initrd-link-2.6.26-1-powerpc64:
true
linux-image-2.6.26-1-powerpc64/prerm/would-invalidate-boot-loader-2.6.26-1-powerpc64:
true
--
Sensationsangebot verlängert: GMX FreeDSL - Telefonanschluss + DSL
für nur 16,37 Euro/mtl.!* http://dsl.gmx.de/?ac=OM.AD.PD003K1308T4569a
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
