Package: wpasupplicant
Version: 0.6.6-1
Severity: normal
When I select the default entry, wpa_supplicant happily connects to an open
network and gets an IP adderess.
When I select the entry for encrypted network wpa_supplicant
authenticates .. and then autenticates again, and again.
According to server logs it authenticates successfully but it never
finishes the connection to he point where it would be usable, and
restarts authentication instead.
I cannot connect with either wpa_gui, wpa_cli or networ-manager-gnome.
network-manager-kde does not offer the option to cennect to a wireless
network in any visible place.
Fails the same way with the 6.4 package.
<2>Authentication with 00:13:7f:8c:8b:60 timed out.
<2>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
<2>CTRL-EVENT-SCAN-RESULTS
<2>Trying to associate with 00:15:fa:d8:95:f0 (SSID='eduroam' freq=2412
MHz)
<2>CTRL-EVENT-SCAN-RESULTS
<2>Associated with 00:15:fa:d8:95:f0
<2>CTRL-EVENT-EAP-STARTED EAP authentication started
<2>CTRL-EVENT-EAP-METHOD EAP vendor 0 method 26 (MSCHAPV2) selected
<2>CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully
> status
bssid=00:15:fa:d8:95:f0
ssid=eduroam
id=1
id_str=eduroam
pairwise_cipher=TKIP
group_cipher=TKIP
key_mgmt=WPA/IEEE 802.1X/EAP
wpa_state=ASSOCIATED
Supplicant PAE state=AUTHENTICATING
suppPortStatus=Unauthorized
EAP state=SUCCESS
selectedMethod=26 (EAP-MSCHAPV2)
00:09.0 Ethernet controller: Atheros Communications Inc. AR5212/AR5213
Multiprotocol MAC/baseband processor (rev 01)
00:09.0 0200: 168c:0013 (rev 01)
ath5k 88576 0 - Live 0xdd9cf000
mac80211 115344 1 ath5k, Live 0xdd9e6000
led_class 4164 1 ath5k, Live 0xdd951000
cfg80211 21640 2 ath5k,mac80211, Live 0xdd969000
-- wpa_supplicant.conf
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
network={
key_mgmt=NONE
disabled=1
id_str="default"
}
network={
ssid="eduroam"
proto=WPA
key_mgmt=WPA-EAP
pairwise=TKIP
eap=MSCHAPV2
identity="XXX"
password="XXX"
ca_cert="XXX"
id_str="eduroam"
}
-- interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo eth0 wlan0
iface lo inet loopback
# The primary network interface
allow-hotplug eth0 wlan0 default eduroam
iface eth0 inet dhcp
# hwaddress ether address
iface wmaster0 inet manual
iface eduroam inet dhcp
iface default inet dhcp
iface wlan0 inet manual
wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (990, 'testing'), (300, 'unstable'), (100, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.27-rc5+acpitz-report (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages wpasupplicant depends on:
ii adduser 3.110 add and remove users and groups
ii libc6 2.7-16 GNU C Library: Shared libraries
ii libdbus-1-3 1.2.1-4 simple interprocess messaging syst
ii libpcsclite1 1.4.102-1 Middleware to access a smart card
ii libreadline5 5.2-3 GNU readline and history libraries
ii libssl0.9.8 0.9.8g-14 SSL shared libraries
ii lsb-base 3.2-20 Linux Standard Base 3.2 init scrip
wpasupplicant recommends no packages.
Versions of packages wpasupplicant suggests:
pn libengine-pkcs11-openssl <none> (no description available)
pn wpagui <none> (no description available)
-- no debconf information
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
