I am having this problem. It does seem to be medium specific.
I have just finished using a stack of Maxell discs with no problems. Those are gone and I am trying to use a stack of generic CD-R's I got at Target. I have used many of these generic discs before with no problem, maybe a year or so ago. But now with the current version of wodim they are not working. wodim -v -v -v speed=36 dev=/dev/sr0 -data /usr3/MP3/TMP/FlyLikeAnEagle_archive1.iso wodim: No write mode specified. wodim: Asuming -tao mode. wodim: Future versions of wodim may have different drive dependent defaults. TOC Type: 1 = CD-ROM wodim: Operation not permitted. WARNING: Cannot set RR-scheduler WARNING: Cannot set priority using setpriority(),increased risk for buffer underruns. scsidev: '/dev/sr0' devname: '/dev/sr0' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Warning: Cannot gain SYS_RAWIO capability: Operation not permitted Possible reason: wodim not installed SUID root. Wodim version: 1.1.2 Using libusal version 'Cdrkit-1.1.2'. SCSI buffer size: 64512 atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'SONY ' Identification : 'DVD RW DRU-530A ' Revision : '1.0d' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0000 (Reserved/Unknown) Profile: 0x001B (DVD+R) Profile: 0x001A (DVD+RW) Profile: 0x0014 (DVD-RW sequential recording) Profile: 0x0013 (DVD-RW restricted overwrite) Profile: 0x0011 (DVD-R sequential recording) Profile: 0x0010 (DVD-ROM) Profile: 0x000A (CD-RW) Profile: 0x0009 (CD-R) Profile: 0x0008 (CD-ROM) Drive current speed: 40 Drive default speed: 40 Drive max speed : 40 Selected speed : 36 Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. Drive DMA Speed: 12902 kB/s 73x CD 9x DVD FIFO size : 12582912 = 12288 KB Track 01: data 233 MB track: 1 start: 0 pregap: 150 Total size: 268 MB (26:33.98) = 119549 sectors Lout start: 268 MB (26:35/74) = 119549 sectors 41 00 00 14 00 00 00 00 41 01 00 10 00 00 00 00 41 01 01 10 00 00 02 00 41 AA 01 14 00 1A 23 4A Track 1 start 0 Track 2 start 119549 41 00 A0 00 00 00 00 01 00 00 00 00 41 00 A1 00 00 00 00 01 00 00 00 00 41 00 A2 00 00 00 00 26 35 74 00 00 41 00 01 00 00 00 00 00 02 00 00 00 Errno: 5 (Input/output error), test unit ready scsi sendcmd: no error CDB: 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 30 00 00 00 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x30 Qual 0x00 (incompatible medium installed) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.000s timeout 40s wodim: No disk / Wrong disk! wodim -v -v -v speed=36 dev=/dev/sr0 -data /usr3/MP3/TMP/FlyLikeAnEagle_archive1.iso wodim: No write mode specified. wodim: Asuming -tao mode. wodim: Future versions of wodim may have different drive dependent defaults. TOC Type: 1 = CD-ROM wodim: Operation not permitted. WARNING: Cannot set RR-scheduler WARNING: Cannot set priority using setpriority(),increased risk for buffer underruns. scsidev: '/dev/sr0' devname: '/dev/sr0' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Warning: Cannot gain SYS_RAWIO capability: Operation not permitted Possible reason: wodim not installed SUID root. Wodim version: 1.1.2 Using libusal version 'Cdrkit-1.1.2'. SCSI buffer size: 64512 atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'SONY ' Identification : 'DVD RW DRU-530A ' Revision : '1.0d' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0000 (Reserved/Unknown) Profile: 0x001B (DVD+R) Profile: 0x001A (DVD+RW) Profile: 0x0014 (DVD-RW sequential recording) Profile: 0x0013 (DVD-RW restricted overwrite) Profile: 0x0011 (DVD-R sequential recording) Profile: 0x0010 (DVD-ROM) Profile: 0x000A (CD-RW) Profile: 0x0009 (CD-R) Profile: 0x0008 (CD-ROM) Drive current speed: 40 Drive default speed: 40 Drive max speed : 40 Selected speed : 36 Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. Drive DMA Speed: 12902 kB/s 73x CD 9x DVD FIFO size : 12582912 = 12288 KB Track 01: data 233 MB track: 1 start: 0 pregap: 150 Total size: 268 MB (26:33.98) = 119549 sectors Lout start: 268 MB (26:35/74) = 119549 sectors 41 00 00 14 00 00 00 00 41 01 00 10 00 00 00 00 41 01 01 10 00 00 02 00 41 AA 01 14 00 1A 23 4A Track 1 start 0 Track 2 start 119549 41 00 A0 00 00 00 00 01 00 00 00 00 41 00 A1 00 00 00 00 01 00 00 00 00 41 00 A2 00 00 00 00 26 35 74 00 00 41 00 01 00 00 00 00 00 02 00 00 00 Errno: 5 (Input/output error), test unit ready scsi sendcmd: no error CDB: 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 30 00 00 00 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x30 Qual 0x00 (incompatible medium installed) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.000s timeout 40s wodim: No disk / Wrong disk! Linux bill 2.6.18-5-686 #1 SMP Mon Dec 24 16:41:07 UTC 2007 i686 GNU/Linux Wodim 1.1.2 Nothing in dmesg from this -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
