Package: linux-image-2.6.26-1-686
Version: 2.6.26-10
Severity: important
Since I've change my motherboard (Gigabyte EP35-DS3) I've these traces
in /var/log/syslog:
kernel: [29436.544734] hda: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
kernel: [29436.544734] hda: status error: error=0x44 { AbortedCommand
LastFailedSense=0x04 }
kernel: [29436.544734] ide: failed opcode was: unknown
kernel: [29436.544734] hda: drive not ready for command
-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-10) ([EMAIL PROTECTED]) (gcc version
4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Sat Nov 8 19:00:26 UTC
2008
** Command line:
root=UUID=6e488276-eb28-4ee4-ab35-da7cebf31b15 ro
** Tainted: P (1)
** Kernel log:
[29267.673964] hda: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[29267.673964] hda: status error: error=0x44 { AbortedCommand
LastFailedSense=0x04 }
[29267.673964] ide: failed opcode was: unknown
[29267.673964] hda: drive not ready for command
[29267.673964] hda: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[29267.673964] hda: status error: error=0x44 { AbortedCommand
LastFailedSense=0x04 }
[29267.673964] ide: failed opcode was: unknown
[29267.673964] hda: drive not ready for command
[29267.673964] hda: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[29267.673964] hda: status error: error=0x44 { AbortedCommand
LastFailedSense=0x04 }
[29267.673964] ide: failed opcode was: unknown
[29267.673964] hda: drive not ready for command
[29267.673964] hda: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[29267.673964] hda: status error: error=0x44 { AbortedCommand
LastFailedSense=0x04 }
[29267.673964] ide: failed opcode was: unknown
[29267.673964] hda: drive not ready for command
[29267.673964] hda: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[29267.673964] hda: status error: error=0x44 { AbortedCommand
LastFailedSense=0x04 }
[29267.673964] ide: failed opcode was: unknown
[29267.673964] hda: drive not ready for command
[29270.076720] hda: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[29270.076730] hda: status error: error=0x44 { AbortedCommand
LastFailedSense=0x04 }
[29270.076734] ide: failed opcode was: unknown
[29270.076738] hda: drive not ready for command
[29270.076781] hda: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[29270.076787] hda: status error: error=0x44 { AbortedCommand
LastFailedSense=0x04 }
[29270.076790] ide: failed opcode was: unknown
[29270.076808] hda: drive not ready for command
[29270.076845] hda: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[29270.076853] hda: status error: error=0x44 { AbortedCommand
LastFailedSense=0x04 }
[29270.076857] ide: failed opcode was: unknown
[29270.076859] hda: drive not ready for command
[29270.076904] hda: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[29270.076910] hda: status error: error=0x44 { AbortedCommand
LastFailedSense=0x04 }
[29270.076914] ide: failed opcode was: unknown
[29270.076917] hda: drive not ready for command
[29270.076955] hda: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[29270.076961] hda: status error: error=0x44 { AbortedCommand
LastFailedSense=0x04 }
[29270.076965] ide: failed opcode was: unknown
[29270.076967] hda: drive not ready for command
[29272.338533] hda: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[29272.338542] hda: status error: error=0x44 { AbortedCommand
LastFailedSense=0x04 }
[29272.338546] ide: failed opcode was: unknown
[29272.338550] hda: drive not ready for command
[29272.338590] hda: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[29272.338597] hda: status error: error=0x44 { AbortedCommand
LastFailedSense=0x04 }
[29272.338600] ide: failed opcode was: unknown
[29272.338603] hda: drive not ready for command
[29272.338638] hda: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[29272.338644] hda: status error: error=0x44 { AbortedCommand
LastFailedSense=0x04 }
[29272.338648] ide: failed opcode was: unknown
[29272.338650] hda: drive not ready for command
[29272.338690] hda: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[29272.338696] hda: status error: error=0x44 { AbortedCommand
LastFailedSense=0x04 }
[29272.338700] ide: failed opcode was: unknown
[29272.338703] hda: drive not ready for command
[29272.338740] hda: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[29272.338746] hda: status error: error=0x44 { AbortedCommand
LastFailedSense=0x04 }
[29272.338750] ide: failed opcode was: unknown
[29272.338752] hda: drive not ready for command
[29274.815606] hda: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[29274.815615] hda: status error: error=0x44 { AbortedCommand
LastFailedSense=0x04 }
[29274.815619] ide: failed opcode was: unknown
[29274.815622] hda: drive not ready for command
[29274.815662] hda: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[29274.815669] hda: status error: error=0x44 { AbortedCommand
LastFailedSense=0x04 }
[29274.815672] ide: failed opcode was: unknown
[29274.815675] hda: drive not ready for command
[29274.815710] hda: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[29274.815716] hda: status error: error=0x44 { AbortedCommand
LastFailedSense=0x04 }
[29274.815720] ide: failed opcode was: unknown
[29274.815722] hda: drive not ready for command
[29274.815762] hda: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[29274.815768] hda: status error: error=0x44 { AbortedCommand
LastFailedSense=0x04 }
[29274.815772] ide: failed opcode was: unknown
[29274.815775] hda: drive not ready for command
[29274.815812] hda: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[29274.815818] hda: status error: error=0x44 { AbortedCommand
LastFailedSense=0x04 }
[29274.815822] ide: failed opcode was: unknown
[29274.815824] hda: drive not ready for command
[29276.975032] hda: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[29276.975041] hda: status error: error=0x44 { AbortedCommand
LastFailedSense=0x04 }
[29276.975045] ide: failed opcode was: unknown
[29276.975048] hda: drive not ready for command
[29276.975091] hda: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[29276.975098] hda: status error: error=0x44 { AbortedCommand
LastFailedSense=0x04 }
[29276.975101] ide: failed opcode was: unknown
[29276.975117] hda: drive not ready for command
[29276.976123] hda: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[29276.976130] hda: status error: error=0x44 { AbortedCommand
LastFailedSense=0x04 }
[29276.976133] ide: failed opcode was: unknown
[29276.976136] hda: drive not ready for command
[29276.977140] hda: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[29276.977146] hda: status error: error=0x44 { AbortedCommand
LastFailedSense=0x04 }
[29276.977150] ide: failed opcode was: unknown
[29276.977153] hda: drive not ready for command
[29276.978578] hda: status error: status=0x59 { DriveReady SeekComplete
DataRequest Error }
[29276.978587] hda: status error: error=0x44 { AbortedCommand
LastFailedSense=0x04 }
[29276.978593] ide: failed opcode was: unknown
[29276.978597] hda: drive not ready for command
** Loaded modules:
Module Size Used by
sha1_generic 2304 0
arc4 1824 0
ecb 2624 0
crypto_blkcipher 15236 1 ecb
ppp_mppe 5700 0
ppp_async 7488 0
crc_ccitt 2080 1 ppp_async
ppp_generic 20028 2 ppp_mppe,ppp_async
slhc 5408 1 ppp_generic
binfmt_misc 7528 1
nvidia 7086148 24
rfcomm 28272 2
l2cap 17248 9 rfcomm
bluetooth 44900 4 rfcomm,l2cap
ppdev 6468 0
lp 8164 0
vmnet 33600 9
parport_pc 22500 0
parport 30988 3 ppdev,lp,parport_pc
vmblock 11620 3
vmci 43988 0
vmmon 60368 0
battery 10180 0
acpi_cpufreq 6796 0
cpufreq_userspace 3172 0
cpufreq_stats 3776 0
cpufreq_powersave 1856 0
cpufreq_ondemand 6476 2
freq_table 4224 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
cpufreq_conservative 5960 0
nfsd 186704 17
auth_rpcgss 33952 1 nfsd
exportfs 3904 1 nfsd
nfs 213896 0
lockd 54248 2 nfsd,nfs
nfs_acl 2912 2 nfsd,nfs
sunrpc 162144 13 nfsd,auth_rpcgss,nfs,lockd,nfs_acl
ipt_ULOG 6820 4
ipt_MASQUERADE 2592 1
nf_nat_irc 2080 0
nf_nat_ftp 2528 0
ipt_REJECT 2784 1
xt_state 2016 9
nf_conntrack_irc 5124 1 nf_nat_irc
nf_conntrack_ftp 6852 1 nf_nat_ftp
xt_tcpudp 2816 8
iptable_mangle 2688 0
iptable_nat 4680 1
nf_nat 15576 4 ipt_MASQUERADE,nf_nat_irc,nf_nat_ftp,iptable_nat
nf_conntrack_ipv4 12268 12 iptable_nat,nf_nat
nf_conntrack 55508 9
ipt_MASQUERADE,nf_nat_irc,nf_nat_ftp,xt_state,nf_conntrack_irc,nf_conntrack_ftp,iptable_nat,nf_nat,nf_conntrack_ipv4
iptable_filter 2624 1
ip_tables 10160 3 iptable_mangle,iptable_nat,iptable_filter
x_tables 13284 7
ipt_ULOG,ipt_MASQUERADE,ipt_REJECT,xt_state,xt_tcpudp,iptable_nat,ip_tables
ipv6 235300 49
ext2 54344 1
fuse 42908 1
sg 26964 0
coretemp 5504 0
it87 17904 0
hwmon_vid 2720 1 it87
joydev 8480 0
usblp 10592 0
snd_hda_intel 324248 3
serio_raw 4740 0
snd_pcm_oss 32800 0
snd_mixer_oss 12320 1 snd_pcm_oss
uvcvideo 45736 0
psmouse 32336 0
snd_intel8x0 26268 0
compat_ioctl32 1312 1 uvcvideo
snd_usb_audio 70272 1
snd_ac97_codec 88484 1 snd_intel8x0
shpchp 25528 0
snd_usb_lib 13440 1 snd_usb_audio
ac97_bus 1728 1 snd_ac97_codec
snd_pcm 62596 5
snd_hda_intel,snd_pcm_oss,snd_intel8x0,snd_usb_audio,snd_ac97_codec
iTCO_wdt 9508 0
videodev 27520 1 uvcvideo
pcspkr 2432 0
pci_hotplug 23460 1 shpchp
snd_seq_midi 5728 0
snd_rawmidi 18496 2 snd_usb_lib,snd_seq_midi
v4l1_compat 12260 2 uvcvideo,videodev
i2c_i801 7920 0
wacom 15776 0
snd_seq_dummy 2660 0
snd_hwdep 6212 1 snd_usb_audio
i2c_core 19828 2 nvidia,i2c_i801
snd_seq_oss 24992 0
snd_seq_midi_event 6432 2 snd_seq_midi,snd_seq_oss
snd_seq 41456 6
snd_seq_midi,snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_timer 17800 2 snd_pcm,snd_seq
snd_seq_device 6380 5
snd_seq_midi,snd_rawmidi,snd_seq_dummy,snd_seq_oss,snd_seq
snd 45604 21
snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_usb_audio,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_hwdep,snd_seq_oss,snd_seq,snd_timer,snd_seq_device
soundcore 6368 1 snd
snd_page_alloc 7816 3 snd_hda_intel,snd_intel8x0,snd_pcm
button 6064 0
intel_agp 22332 0
agpgart 28776 2 nvidia,intel_agp
pl2303 14596 0
usbserial 26472 1 pl2303
evdev 8000 5
ext3 105416 5
jbd 39444 1 ext3
mbcache 7108 2 ext2,ext3
ide_cd_mod 27652 0
cdrom 30176 1 ide_cd_mod
ata_piix 14180 0
ata_generic 4676 0
sd_mod 22200 9
usbhid 35904 0
hid 33184 1 usbhid
ff_memless 4392 1 usbhid
usb_storage 75936 0
floppy 47716 0
ohci1394 24944 0
ieee1394 75800 1 ohci1394
skge 33360 0
ohci_hcd 18500 0
jmicron 2208 0 [permanent]
ahci 23176 0
aic7xxx 117592 7
scsi_transport_spi 19840 1 aic7xxx
ide_pci_generic 3908 0 [permanent]
ide_core 96168 3 ide_cd_mod,jmicron,ide_pci_generic
libata 140384 3 ata_piix,ata_generic,ahci
r8169 23684 0
scsi_mod 129356 6
sg,sd_mod,usb_storage,aic7xxx,scsi_transport_spi,libata
dock 8272 1 libata
ehci_hcd 28428 0
uhci_hcd 18672 0
usbcore 118160 13
usblp,uvcvideo,snd_usb_audio,snd_usb_lib,wacom,pl2303,usbserial,usbhid,usb_storage,ohci_hcd,ehci_hcd,uhci_hcd
thermal 15228 0
processor 32576 2 acpi_cpufreq,thermal
fan 4164 0
thermal_sys 10856 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM
Controller [8086:29c0] (rev 02)
Subsystem: Giga-byte Technology Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI
Express Root Port [8086:29c1] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: f4000000-f7ffffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at e000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at e100 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e500 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fc105000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller [8086:293e] (rev 02)
Subsystem: Giga-byte Technology Device [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fc100000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00009000-00009fff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 4 [8086:2946] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fc000000-fc0fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: 00000000fc200000-00000000fc2fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at e200 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e300 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fc104000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
92) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=06, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fa000000-fbffffff
Prefetchable memory behind bridge: 00000000fc300000-00000000fc3fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IB (ICH9) LPC Interface
Controller [8086:2918] (rev 02)
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 IDE interface [0101]: Intel Corporation 82801IB (ICH9) 2 port SATA IDE
Controller [8086:2921] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Giga-byte Technology Device [1458:b002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f000 [size=16]
Region 5: I/O ports at f100 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller
[8086:2930] (rev 02)
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fc106000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port
SATA IDE Controller [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Device [1458:b002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at e700 [size=8]
Region 1: I/O ports at e800 [size=4]
Region 2: I/O ports at e900 [size=8]
Region 3: I/O ports at ea00 [size=4]
Region 4: I/O ports at eb00 [size=16]
Region 5: I/O ports at ec00 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix
01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8500 GT
[10de:0421] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. Device [1462:0921]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f4000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at a000 [size=128]
[virtual] Expansion ROM at f7000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nvidia
03:00.0 SATA controller [0106]: JMicron Technologies, Inc. JMicron 20360/20363
AHCI Controller [197b:2363] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology Device [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 5: Memory at fc000000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
03:00.1 IDE interface [0101]: JMicron Technologies, Inc. JMicron 20360/20363
AHCI Controller [197b:2363] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Device [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 16
Region 0: I/O ports at b000 [size=8]
Region 1: I/O ports at b100 [size=4]
Region 2: I/O ports at b200 [size=8]
Region 3: I/O ports at b300 [size=4]
Region 4: I/O ports at b400 [size=16]
Capabilities: <access denied>
Kernel driver in use: JMicron IDE
Kernel modules: jmicron
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: Giga-byte Technology Device [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 219
Region 0: I/O ports at c000 [size=256]
Region 2: Memory at f9000000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at fc200000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
05:00.0 SCSI storage controller [0100]: Adaptec AIC-7892A U160/m [9005:0080]
(rev 02)
Subsystem: Adaptec 29160 Ultra160 SCSI Controller [9005:e2a0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (10000ns min, 6250ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
BIST result: 00
Region 0: I/O ports at d000 [disabled] [size=256]
Region 1: Memory at fb104000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at fc300000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: aic7xxx
Kernel modules: aic7xxx
05:01.0 PCI bridge [0604]: Hint Corp HB6 Universal PCI-PCI bridge
(non-transparent mode) [3388:0021] (rev 15) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Bus: primary=05, secondary=06, subordinate=06, sec-latency=32
Memory behind bridge: fb000000-fb0fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
05:02.0 Ethernet controller [0200]: 3Com Corporation 3c940 10/100/1000Base-T
[Marvell] [10b7:1700] (rev 10)
Subsystem: 3Com Corporation 3C941 Gigabit LOM Ethernet Adapter
[10b7:0020]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fb100000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at d100 [size=256]
[virtual] Expansion ROM at fc320000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: skge
Kernel modules: skge
06:08.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 41)
(prog-if 10 [OHCI])
Subsystem: Adaptec Device [9004:1135]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fb007000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
06:08.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 41)
(prog-if 10 [OHCI])
Subsystem: Adaptec Device [9004:1135]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at fb004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
06:08.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 02)
(prog-if 20 [EHCI])
Subsystem: Adaptec Device [9004:11e0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (4000ns min, 8500ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 16
Region 0: Memory at fb005000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
06:0c.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23
IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI])
Subsystem: Texas Instruments Device [104c:8010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fb006000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at fb000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92j tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-1-686 recommends:
ii libc6-i686 2.7-16 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-1-686 suggests:
ii grub 0.97-47 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-686/preinst/abort-overwrite-2.6.26-1-686:
linux-image-2.6.26-1-686/postinst/bootloader-error-2.6.26-1-686:
linux-image-2.6.26-1-686/postinst/depmod-error-initrd-2.6.26-1-686: false
linux-image-2.6.26-1-686/postinst/old-system-map-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/prerm/would-invalidate-boot-loader-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/elilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-dir-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-686/postinst/create-kimage-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/overwriting-modules-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/depmod-error-2.6.26-1-686: false
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-686/prerm/removing-running-kernel-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/abort-install-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-686/preinst/bootloader-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/lilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/bootloader-test-error-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/failed-to-move-modules-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/initrd-2.6.26-1-686:
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
