> > > > > > Tried: 2.6.24-etchnhalf.1-686-bigmem > > > > > > No sensors found either. > > > > > > > > > > What's the output of sensors-detect? > > > > > > > > Fyi: moments ago I installed linux-image-2.6.27-rc5-686-bigmem and that > > > > one doesn't show any sensors too. > > > > > > Could you try to modprobe dme1737? It should detect a sensor chip. > > > > The module loads but sensors-detect finds nothing: > > dme1737 30948 0 > > hwmon_vid 3552 1 dme1737 > > i2c_core 21460 6 > > dme1737,i2c_via,i2c_algo_bit,i2c_dev,eeprom,i2c_viapro > > > > I thought the EPIA SN18000G was using the same chip as the SN18000 one. > It seems this is not the case, so the answer is that the current kernel > is lacking support for your board. You will have to wait until someone > write the corresponding kernel module.
I think this should work: http://lists.lm-sensors.org/pipermail/lm-sensors/2008-June/023456.html (see http://www.lm-sensors.org/wiki/Devices and ctrl+f for c7temp) Folkert van Heusden -- ---------------------------------------------------------------------- Phone: +31-6-41278122, PGP-key: 1F28D8AE, www.vanheusden.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
