Package: installation-reports INSTALL REPORT
Debian-installer-version: 6.6.2005 main ftp server uname -a: Linux BHOS062 2.4.27-2-386 #1 Mon May 16 16:47:51 JST 2005 i686 GNU/Linux Date: Di Jun 7 10:30:00 CEST 2005 Method... Boot parameter: linux netcfg/disable_dhcp=true What did you boot off? CD 1 If network install, from where? [ ] Proxied? [ ] Machine: Compaq Proliant 400 Processor: Intel Pentium III 500 MHz Memory: 2 x 64 MB SD-RAM Root Device: SCSI with 10 GB Root Size/partition table: Dunno, the installer did it :) Output of lspci and lspci -n: 0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) 0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) 0000:00:0d.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03) 0000:00:14.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) 0000:00:14.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) 0000:00:14.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) 0000:00:14.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02) 0000:02:04.0 SCSI storage controller: LSI Logic / Symbios Logic 53c895 (rev 02) 0000:02:05.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 05) 0000:02:06.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC 215IIC [Mach64 GT IIC] (rev 7a) 0000:02:07.0 System peripheral: Compaq Computer Corporation Advanced System Management Controller 0000:00:00.0 0600: 8086:7190 (rev 03) 0000:00:01.0 0604: 8086:7191 (rev 03) 0000:00:0d.0 0604: 1011:0024 (rev 03) 0000:00:14.0 0601: 8086:7110 (rev 02) 0000:00:14.1 0101: 8086:7111 (rev 01) 0000:00:14.2 0c03: 8086:7112 (rev 01) 0000:00:14.3 0680: 8086:7113 (rev 02) 0000:02:04.0 0100: 1000:000c (rev 02) 0000:02:05.0 0200: 8086:1229 (rev 05) 0000:02:06.0 0300: 1002:4756 (rev 7a) 0000:02:07.0 0880: 0e11:a0f0 Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: The installer detected my scsi card and hdd without any boot command! Respect :-) WHY didnt ask the installer to choose between static ip and dhcp without any boot command ? Apache2 ownz cause it comes with ssl :D HOW did i search with find? It seems a litte bit difficult! :( Install logs and other status info is available in /var/log/debian-installer/. Once you have filled out this report, mail it to [EMAIL PROTECTED]
