On Friday 20 June 2008 10:40:46 Mau wrote:
> Joost Yervante Damad ha scritto:
> > It works for me, with timidity enabled via /etc/default/timidity (-Os)
> > and kmid configured to use the timidity midi port as output via Settings
> > -> Midi Setup.
> >
> > Joost
>
> My setup is as yours, but I can't get any sound. For the sake of
> clarity, kmid's MIDI setup shows 5 devices:
>
> Midi Through Midi Through Port-0 - ALSA device
> TiMidity TiMidity port 0 - ALSA device
> TiMidity TiMidity port 1 - ALSA device
> TiMidity TiMidity port 2 - ALSA device
> TiMidity TiMidity port 3 - ALSA device
>
> I selected 'TiMidity TiMidity port 0 - ALSA device'.
> No sound at all both with my laptop, which has a
>
> 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM
> (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02)
>
> (actually a Realtek codec) and with my desktop (ASUS P4P800S, ICH5 AC'97
> Audio Controller, actually an Analog Devices "SoundMAX" codec).
>
> Attached here you can find some cats from /proc/asound/seq/, both in
> standby and during a play attempt with kmid.
Sorry for the late reply. The proc files look fine to me.
However it's perhaps easier to check the alsa connections with the aconnect.
This is what I get:
[EMAIL PROTECTED]:~$ aconnect -li
client 0: 'System' [type=kernel]
0 'Timer '
1 'Announce '
Connecting To: 15:0
client 14: 'Midi Through' [type=kernel]
0 'Midi Through Port-0'
Connected From: 129:0
[EMAIL PROTECTED]:~$ aconnect -lo
client 14: 'Midi Through' [type=kernel]
0 'Midi Through Port-0'
Connected From: 129:0
client 128: 'TiMidity' [type=user]
0 'TiMidity port 0 '
Connected From: 130:0
1 'TiMidity port 1 '
Connected From: 131:0
2 'TiMidity port 2 '
Connected From: 132:0
3 'TiMidity port 3 '
Connected From: 133:0
client 129: 'Client-129' [type=user]
0 'port-0 '
Connecting To: 14:0
client 130: 'Client-130' [type=user]
0 'port-0 '
Connecting To: 128:0
client 131: 'Client-131' [type=user]
0 'port-0 '
Connecting To: 128:1
client 132: 'Client-132' [type=user]
0 'port-0 '
Connecting To: 128:2
client 133: 'Client-133' [type=user]
0 'port-0 '
Connecting To: 128:3
Joost
--
homepage: http://damad.be/joost
photo/blog: http://damad.be/joost/blog
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
