Package: sl-modem-source
Version: 2.9.9a-1
When plugging/unplugging the AC/DC adapter (or removing battery or
elsewere related to ACPI events) the slmodem deaemon freeze the system
for a few seconds. After this, the connection is lost and if I try to
redial (I use KPPP), the system freeze forever (slmodemd is taking 100%
of CPU).
If I don't try to reconnect the system works normally.
Sometimes I found out that the system freeze also during normal working
(it seems random freeze) without pluggin/unplugging.
I'm using GNU/Linux debian patched kernel-source-2.6.8 ver 2.6.8-16
compiled from scratch and libc6 2.3.2.ds1-22 on Acer aspire 1522 WLmi
notebook
This is the output of "hwinfo --short"
cpu:
AMD Athlon(tm) 64 Processor 3000+, 800 MHz
keyboard:
/dev/input/event0 AT Translated Set 2 keyboard
mouse:
/dev/input/mice Microsoft Notebook/Mobile Optical Mouse 2.0
/dev/input/mice SynPS/2 Synaptics TouchPad
graphics card:
Acer Incorporated [ALI] 0x0347
sound:
Acer Incorporated [ALI] VT8233/A/8235 AC97 Audio
Controller
storage:
Acer Incorporated [ALI]
VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
network:
AMBIT Microsystem Ethernet controller
Acer Incorporated [ALI] RTL-8169
modem:
/dev/ttySL0 Acer Incorporated [ALI] Intel 537 [AC97 Modem]
network interface:
eth0 Ethernet network interface
eth1 Ethernet network interface
lo Loopback network interface
sit0 Network Interface
disk:
/dev/hda IC25N060ATMR04-0
partition:
/dev/hda1 Partition
/dev/hda2 Partition
/dev/hda3 Partition
/dev/hda4 Partition
/dev/hda5 Partition
/dev/hda6 Partition
/dev/hda7 Partition
/dev/hda8 Partition
/dev/hda9 Partition
/dev/hda10 Partition
/dev/hda11 Partition
/dev/hda12 Partition
/dev/hda13 Partition
/dev/hda14 Partition
/dev/hda15 Partition
/dev/hda16 Partition
/dev/hda17 Partition
/dev/hda18 Partition
/dev/hda19 Partition
cdrom:
/dev/hdc TSSTcorpCD/DVDW TS-L532A
usb controller:
Acer Incorporated [ALI] USB
Acer Incorporated [ALI] USB
Acer Incorporated [ALI] USB
Acer Incorporated [ALI] USB 2.0
bios:
BIOS
bridge:
Acer Incorporated [ALI] Host bridge
VIA Host bridge
VIA Host bridge
VIA Host bridge
VIA Host bridge
VIA Host bridge
VIA PCI bridge
Acer Incorporated [ALI] CardBus bridge
Acer Incorporated [ALI] CardBus bridge
VIA VT8235 ISA Bridge
AMD K8 NorthBridge
AMD K8 NorthBridge
AMD K8 NorthBridge
AMD K8 NorthBridge
hub:
Linux 2.6.8-16-nvidia uhci_hcd VIA Technologies,
Inc. VT82xxxxx UHCI USB 1.1 Controller
Linux 2.6.8-16-nvidia uhci_hcd VIA Technologies,
Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
Linux 2.6.8-16-nvidia uhci_hcd VIA Technologies,
Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
Linux 2.6.8-16-nvidia ehci_hcd VIA Technologies,
Inc. USB 2.0
memory:
Main Memory
firewire controller:
Acer Incorporated [ALI] FireWire (IEEE 1394)
unknown:
FPU
DMA controller
PIC
Timer
RTC
Keyboard controller
/dev/lp0 Parallel controller
PS/2 Controller
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
PnP Unclassified device
HP Unclassified device
/dev/ttyS1 16550A
and this is the output of "hwinfo --modem"
29: PCI 11.6: 10204 LinModem
[Created at pci.244]
Unique ID: KBSt.5aMWU0Zhf+D
SysFS ID: /devices/pci0000:00/0000:00:11.6
SysFS BusID: 0000:00:11.6
Hardware Class: modem
Model: "Acer Incorporated [ALI] Intel 537 [AC97 Modem]"
Vendor: pci 0x1106 "VIA Technologies, Inc."
Device: pci 0x3068 "Intel 537 [AC97 Modem]"
SubVendor: pci 0x1025 "Acer Incorporated [ALI]"
SubDevice: pci 0x0046
Revision: 0x80
Driver: "slamr"
Device File: /dev/ttySL0
Device Number: char 212:0
I/O Ports: 0x1800-0x18ff (rw)
IRQ: 201 (759712 events)
Requires: smartlink-softmodem
Driver Info #0:
Driver Status: slamr is active
Driver Activation Cmd: "modprobe slamr"
Config Status: cfg=new, avail=yes, need=no, active=unknown
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
