--On 07. August 2008 17:48:52 +0200 Gaudenz Steinlin <[EMAIL PROTECTED]>
wrote:
> Sorry for my late reply, but better late than never...
> On Sun, Aug 12, 2007 at 08:16:44PM +0200, Hannes Schulz wrote:
>> Package: mol
>> Version: 0.9.72.1~dfsg-1
>> Severity: normal
>>
>>
>> The file /usr/share/mol/config/molrc.post contains the line
>> of_image: ${drv}/openbios
>> twice. The file "/usr/share/mol/drivers/openbios" does not exist.
>>
>> The solution is easy:
>> of_image: ${drv}/of
>> works for MacOS 9. I could not test OS X.
>
> Does this actually cause any problems? If not I'd rather leave the
> default as set by the upstream author.
>
> For me MOL works fine with the default setting.
>
> Gaudenz
>
My old TiBook (/proc/cpuinfo says "PowerBook3,2") is unable to start MacOS9
without my change.
Here is the output of /var/log/mol.0.log *without* my change:
> Running in PowerPC 7400 mode, 116 MB RAM
> Timebase: 24.96 MHz, Bus: 99.86 MHz, Clock: 400 MHz
> Using USB mouse on /dev/input/mice
> OHCI USB controller registered
> Fullscreen video on VT 8.
> Cache enabled for console-video
> Video driver(s): [console_video]
>
> 1152* 768, depth 8,15,32 { 0.0 } Hz
>
> No video mode match the default one.
> Autoswitching to console
> Ethernet Interface (port 1) 'tun-<tap1>' @ 00:00:0D:EA:DB:EE
>
> ip/mask: 192.168.40.2/255.255.255.0 gw: 192.168.40.1
> broadcast: 192.168.40.255 nameserver: 192.168.40.1
>
> ALSA sound driver loaded (device 'default')
> ALSA: failed to setup mixer
>
> Available Disks:
> HFS+ /dev/hda9 Roadwarrior <rw> 4096 MB BOOT
> HFS /dev/hda10 Janus <rw> 1024 MB
>
> SCSI devices:
> [SCSI auto-probing disabled]
>
> <No SCSI Devices>
>
> Can't read Elf32 image header
> Fatal error: opening drivers/openbios: No such file or directory
> cleaning up...
> Terminating threads...
Obviously my PowerBook needs this file.
For reference: I have *no* file named openbios in
/usr/share/mol/drivers. Neither mol nor mol-drivers-macos nor
mol-drivers-linux seems to provide it.
These are the installed packages:
ii mol 0.9.72.1~dfsg-2
ii mol-drivers-linux 0.9.70+1-2
ii mol-drivers-macos 0.9.72.1-1
Note: mol-drivers-linux is older.
Hope that helps
Hannes
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
